Refine
Document Type
Keywords
Institute
Surface plasmon resonance, being widely used in bioanalytics and biotechnology, is influenced by the electrical potential of the resonant gold layer. To evaluate the mechanism of this effect, we have studied it in solutions of various inorganic electrolytes. The magnitude of the effect decreases according to the series: KBr>KCl>KF>NaClO4. The data were treated by using different models of the interface. A quantitative description was obtained for the model, which takes into account the local dielectric function of gold being affected by the free electron charge, diffuse ionic layer near the gold/water interface, and specific adsorption of halides to the gold surface with partial charge transfer. Taking into account that most biological experiments are performed in chloride-containing solutions, detailed analysis of the model at these conditions was performed. The results indicate that the chloride adsorption is the main mechanism for the influence of potential on the surface plasmon resonance. The dependencies of surface concentration and residual charge of chloride on the applied potential were determined.
An analysis of early stage of electrochemical nucleation is crucial in order to understand the mechanism of this process and for electrochemical synthesis of new materials. We show here an application of the wide field surface plasmon microscopy (WF-SPRM) for this purpose. It allows us in-situ monitoring of the growth of nuclei in the range from ~20 till over 1000 nm. The system registers the moment and the place of the formation of each individual nucleus for the total number of the tracked nuclei up to ~10,000 per 1 mm2. The results demonstrate that the integral information obtained from electrochemical measurements can be extracted quantitatively from optical measurements while optical data provide also information on the size of each individual nucleus, individual nucleation time, localization and growth kinetics, and allows one to distinguish the rate limiting stage for each individual nucleus. In this work WF-SPRM was applied for investigation of electrochemical deposition of copper on gold, but this technique can be extended easily to other materials or other nucleation types.
Development of nanotechnology and corresponding industries during the last decade resulted in a new challenge for analytical science. This includes an ultrasensitive detection and characterization of nanoparticles of different origin and other nanomaterials in various media, including so complex ones as food, biological or environmental samples. The goal of this review is a systematic analysis of possible approaches and description of physical principles behind these methods. The main attention is paid to optical methods which are considered by authors to be mostly effective for the formulated task. Different approaches for detection and analysis of nanoparticles in a volume as well as of those adsorbed on a surface are discussed. While the technologies based on direct analysis of nanoparticle suspensions belong to the established approaches whose development potential has been in large extent exhausted, the novel technologies based on the surface sensing of adsorbed nanoparticles demonstrate intensive development. Therefore, the final part of the review is focused on the wide-field surface plasmon resonance microscopy. It allows one an ultrasensitive detection and characterization of individual nanoparticles of different origin in complex media and provides numerous possibilities for subsequent chemical identification of the detected particles using a hyphenation with other analytical technologies.
The increasing production and application of nanoparticles necessitates a highly sensitive analytical method for the quantification and identification of these potentially hazardous materials. We describe here an application of surface plasmon microscopy for the individual detection of each adsorbed nanoparticle and for visualization of its electrochemical conversion. Whereas the adsorption rate characterizes the number concentration of nanoparticles, the potential at which the adsorbed nanoparticles disappear during an anodic potential sweep characterizes the type of material. All the adsorbed nanoparticles are subjected to the potential sweep simultaneously; nevertheless, each of the up to a million adsorbed nanoparticles is identified individually by its electrochemical dissolution potential. The technique has been tested with silver and copper nanoparticles, but can be extended to many other electrochemically active nanomaterials.
SPR based biosensors register binding of analytes to the surface with immobilized receptors by measuring changes of the refractive index near this surface. An important task in the improvement of this measurement technology is a separation of signals, corresponding to the changes in the chemosensitive layer, from undesired contributions of bulk phase, for example, due to fluctuations of temperature, concentrations of solutes, pressure. The wavelength of the incident light influences strongly the penetration depth of the corresponding evanescent wave. This dependence was exploited here for compensation of the contribution of the bulk refractive index. It was performed using differential SPR measurements at two wavelengths with differing penetration depths. Theoretical analysis and numerical optimization of the suggested approach, named a Penetration Difference Self-Referencing SPR (PDSR-SPR), were performed. Experimental test was performed using 658 and 980 nm laser diodes. Over 20 times suppression of variations of bulk refractive index with magnitude up to 1000 μRIU was observed. Finally, PDSR-SPR approach was applied for monitoring of antibodies binding to the immobilized antigens.
A new approach for self-referencing in SPR biosensors is reported. The method is technologically simple and applicable for a wide range of existing SPR instrumentation with Kretschmann configuration. It is based on the micropatterning of the sensor area with sensing and referencing areas whose shape and distribution can be chosen arbitrarily and their characteristic sizes are larger than the plasmons propagation length. Provided that roughly a half of the area is used as the sensing area while its optical thickness is different from that of the referencing area, an integral measurement of the intensity of the reflected light over such a patterned surface near the summary resonance conditions exhibits self-referencing properties. An over ten-fold suppression of the effect caused by the variation of the bulk refractive index was observed.
An ultrasensitive analytical method for direct detection of single nanoparticles in complex environment is described. The method relies on the wide-field surface plasmon microscopy (SPM). The suppression of matrix effects is achieved by image analysis based on the template matching. First, characteristic SPM images of nanoparticles are collected in aqueous suspensions. Then the detection of nanoparticles in complex environment is performed using template matching.
Quantification and characterization of nanoparticles size was demonstrated at subppb level (∼ 100 pg/mL) in such complex media as wines, fruit juices, or cosmetic formulation. Visualization of the nanoparticles is performed in real time. The method does not require any sample pretreatment. If the minimally acceptable adsorption rate is defined as one nanoparticle to the whole sensor surface per few seconds, the working range of the method is ∼ 10 6 to 10 10
nanoparticles per mL.
An approach for visualization of patterned monomolecular layers in surface plasmon microscopy (SPM) is suggested. The development of hidden image in SPM is achieved by referencing of images obtained in the presence of electrolytes with a high molar refraction of either anions or cations. A formation of diffuse layer near the charged surface areas leads to the redistribution of ions. The ratio of SPM images allows one to visualize this redistribution and to distinguish surface areas with different properties. The approach is unobtrusive and robust; it can be used with most SPR imaging instruments.
In-situ detection and characterization of nanoparticles in biological media as well as in food or other complex samples is still a big challenge for existing analytical methods. Here we describe a label-free and cost-effective analytical method for detection of nanoparticles in the concentration range 106 -1010 NPs/ml. The proposed method is based on the surface plasmon resonance microscopy (SPRM) with a large field of view (~1.3mm2 ). It is able to detect and count adsorbing nanoparticles individually, totally up to the hundreds of thousands of NPs on the sensor surface. At constant diffusion conditions the detection rate is proportional to the number concentration of NPs, this provides an approach to determine the NPs concentration. The adsorption of nanoparticle can be manipulated by the surface functionalization, pH and electrolyte concentration of suspensions. Images of detected nanoparticles can be quantified in order to characterize them individually. The image intensity grows quasi-linearly with nanoparticle size for the given material. However, the size and material of nanoparticle cannot be resolved directly from the image. For determination of chemical composition, SPRM can be assisted by electrochemical analysis. In this case, the gold sensor surface is used both as a resonant media for plasmon microscopy and as a working electrode. Under potential sweep, the adsorbed NPs can be subjected to electrochemical dissolution, which is detected optically. The potential of this conversion characterizes the material of NPs.