Refine
Year of publication
Document Type
- Article (10)
- In Proceedings (9)
- ZIB-Report (7)
- In Collection (2)
- Research data (1)
Is part of the Bibliography
- no (29)
Keywords
- 2D distance map (1)
- Amira (1)
- Beton (1)
- Bildverarbeitung (1)
- Computertomografie (1)
- Cultural Heritage (1)
- HCI (1)
- Kiosk application (1)
- Korrosionserkennung (1)
- additive manufacturing (1)
Institute
- Visual and Data-centric Computing (29) (remove)
Kurzfassung. Durch die Alkalität des Betons wird Betonstahl dauerhaft vor
Korrosion geschützt. Infolge von Chlorideintrag kann dieser Schutz nicht länger
aufrechterhalten werden und führt zu Lochkorrosion. Die zerstörungsfreie Prüfung
von Stahlbetonproben mit 3D-CT bietet die Möglichkeit, eine Probe mehrfach
gezielt vorzuschädigen und den Korrosionsfortschritt zu untersuchen. Zur Quantifizierung
des Schädigungsgrades müssen die bei dieser Untersuchung anfallenden
großen Bilddaten mit Bildverarbeitungsmethoden ausgewertet werden. Ein wesentlicher
Schritt dabei ist die Segmentierung der Bilddaten, bei der zwischen Korrosionsprodukt
(Rost), Betonstahl (BSt), Beton, Rissen, Poren und Umgebung
unterschieden werden muss. Diese Segmentierung bildet die Grundlage für statistische
Untersuchungen des Schädigungsfortschritts. Hierbei sind die Änderung
der BSt-Geometrie, die Zunahme von Korrosionsprodukten und deren Veränderung
über die Zeit sowie ihrer räumlichen Verteilung in der Probe von Interesse. Aufgrund
der Größe der CT-Bilddaten ist eine manuelle Segmentierung nicht durchführbar,
so dass automatische Verfahren unabdingbar sind. Dabei ist insbesondere
die Segmentierung der Korrosionsprodukte in den Bilddaten ein schwieriges
Problem. Allein aufgrund der Grauwerte ist eine Zuordnung nahezu unmöglich,
denn die Grauwerte von Beton und Korrosionsprodukt unterscheiden sich kaum.
Eine formbasierte Suche ist nicht offensichtlich, da die Korrosionsprodukte in Beton
diffuse Formen haben.
Allerdings lässt sich Vorwissen über die Ausbreitung der Korrosionsprodukte
nutzen. Sie bilden sich in räumlicher Nähe des BSt (in Bereichen vorheriger
Volumenabnahme des BSt), entlang von Rissen sowie in Porenräumen, die direkt
am BSt und in dessen Nahbereich liegen. Davon ausgehend wird vor der
Korrosionsprodukterkennung zunächst eine BSt-Volumen-, Riss- und Porenerkennung
durchgeführt. Dieser in der Arbeit näher beschriebene Schritt erlaubt es, halbautomatisch
Startpunkte (Seed Points) für die Korrosionsprodukterkennung zu
finden. Weiterhin werden verschiedene in der Bildverarbeitung bekannte
Algorithmen auf ihre Eignung untersucht werden.
Introduction – Many biological structures show recurring tiling patterns on one structural level or the other. Current image acquisition techniques are able to resolve those tiling patterns to allow quantitative analyses. The resulting image data, however, may contain an enormous number of elements. This renders manual image analysis infeasible, in particular when statistical analysis is to be conducted, requiring a larger number of image data to be analyzed. As a consequence, the analysis process needs to be automated to a large degree. In this paper, we describe a multi-step image segmentation pipeline for the automated segmentation of the calcified cartilage into individual tesserae from computed tomography images of skeletal elements of stingrays.
Methods – Besides applying state-of-the-art algorithms like anisotropic diffusion smoothing, local thresholding for foreground segmentation, distance map calculation, and hierarchical watershed, we exploit a graph-based representation for fast correction of the segmentation. In addition, we propose a new distance map that is computed only in the plane that locally best approximates the calcified cartilage. This distance map drastically improves the separation of individual tesserae. We apply our segmentation pipeline to hyomandibulae from three individuals of the round stingray (Urobatis halleri), varying both in age and size.
Results – Each of the hyomandibula datasets contains approximately 3000 tesserae. To evaluate the quality of the automated segmentation, four expert users manually generated ground truth segmentations of small parts of one hyomandibula. These ground truth segmentations allowed us to compare the segmentation quality w.r.t. individual tesserae. Additionally, to investigate the segmentation quality of whole skeletal elements, landmarks were manually placed on all tesserae and their positions were then compared to the segmented tesserae. With the proposed segmentation pipeline, we sped up the processing of a single skeletal element from days or weeks to a few hours.
In civil engineering, the corrosion of steel reinforcements in structural elements of concrete bares a risk of
stability-reduction, mainly caused by the exposure to chlorides. 3D computed tomography (CT) reveals the inner
structure of concrete and allows one to investigate the corrosion with non-destructive testing methods. To carry
out such investigations, specimens with a large artificial crack and an embedded steel rebar have been
manufactured. 3D CT images of those specimens were acquired in the original state. Subsequently three cycles
of electrochemical pre-damaging together with CT imaging were applied. These time series have been evaluated
by means of image processing algorithms to segment and quantify the corrosion products. Visualization of the
results supports the understanding of how corrosion propagates into cracks and pores. Furthermore, pitting of
structural elements can be seen without dismantling. In this work, several image processing and visualization
techniques are presented that have turned out to be particularly effective for the visualization and segmentation
of corrosion products. Their combination to a workflow for corrosion analysis is the main contribution of this
work.
An intuitive and sparse representation of the void space of porous materials supports the efficient analysis and visualization of interesting qualitative and quantitative parameters of such materials. We introduce definitions of the elements of this void space, here called pore space, based on its distance function, and present methods to extract these elements using the extremal structures of the distance function. The presented methods are implemented by an image processing pipeline that determines pore centers, pore paths and pore constrictions. These pore space elements build a graph that represents the topology of the pore space in a compact way. The representations we derive from μCT image data of realistic soil specimens enable the computation of many statistical parameters and, thus, provide a basis for further visual analysis and application-specific developments. We introduced parts of our pipeline in previous work. In this chapter, we present additional details and compare our results with the analytic computation of the pore space elements for a sphere packing in order to show the correctness of our graph computation.
Adapting trabecular structures for 3D printing: an image processing approach based on µCT data
(2017)
Materials with a trabecular structure notably combine advantages such as lightweight, reasonable strength, and permeability for fluids. This combination of advantages is especially interesting for tissue engineering in trauma surgery and orthopedics. Bone-substituting scaffolds for instance are designed with a trabecular structure in order to allow cell migration for bone ingrowth and vascularization. An emerging and recently very popular technology to produce such complex, porous structures is 3D printing. However, several technological aspects regarding the scaffold architecture, the printable resolution, and the feature size have to be considered when fabricating scaffolds for bone tissue replacement and regeneration.
Here, we present a strategy to assess and prepare realistic trabecular structures for 3D printing using image analysis with the aim of preserving the structural elements. We discuss critical conditions of the printing system and present a 3-stage approach to adapt a trabecular structure from $\mu$CT data while incorporating knowledge about the printing system. In the first stage, an image-based extraction of solid and void structures is performed, which results in voxel- and graph-based representations of the extracted structures. These representations not only allow us to quantify geometrical properties such as pore size or strut geometry and length. But, since the graph represents the geometry and the topology of the initial structure, it can be used in the second stage to modify and adjust feature size, volume and sample size in an easy and consistent way. In the final reconstruction stage, the graph is then converted into a voxel representation preserving the topology of the initial structure. This stage generates a model with respect to the printing conditions to ensure a stable and controlled voxel placement during the printing process.
Adapting trabecular structures for 3D printing: an image processing approach based on µCT data
(2017)
Materials with a trabecular structure notably combine advantages such as lightweight, reasonable strength, and permeability for fluids. This combination of advantages is especially interesting for tissue engineering in trauma surgery and orthopedics. Bone-substituting scaffolds for instance are designed with a trabecular structure in order to allow cell migration for bone ingrowth and vascularization. An emerging and recently very popular technology to produce such complex, porous structures is 3D printing. However, several technological aspects regarding the scaffold architecture, the printable resolution, and the feature size have to be considered when fabricating scaffolds for bone tissue replacement and regeneration.
Here, we present a strategy to assess and prepare realistic trabecular structures for 3D printing using image analysis with the aim of preserving the structural elements. We discuss critical conditions of the printing system and present a 3-stage approach to adapt a trabecular structure from $\mu$CT data while incorporating knowledge about the printing system. In the first stage, an image-based extraction of solid and void structures is performed, which results in voxel- and graph-based representations of the extracted structures. These representations not only allow us to quantify geometrical properties such as pore size or strut geometry and length. But, since the graph represents the geometry and the topology of the initial structure, it can be used in the second stage to modify and adjust feature size, volume and sample size in an easy and consistent way. In the final reconstruction stage, the graph is then converted into a voxel representation preserving the topology of the initial structure. This stage generates a model with respect to the printing conditions to ensure a stable and controlled voxel placement during the printing process.
Introduction – Many biological structures show recurring tiling patterns on one structural level or the other. Current image acquisition techniques are able to resolve those tiling patterns to allow quantitative analyses. The resulting image data, however, may contain an enormous number of elements. This renders manual image analysis infeasible, in particular when statistical analysis is to be conducted, requiring a larger number of image data to be analyzed. As a consequence, the analysis process needs to be automated to a large degree. In this paper, we describe a multi-step image segmentation pipeline for the automated segmentation of the calcified cartilage into individual tesserae from computed tomography images of skeletal elements of stingrays.
Methods – Besides applying state-of-the-art algorithms like anisotropic diffusion smoothing, local thresholding for foreground segmentation, distance map calculation, and hierarchical watershed, we exploit a graph-based representation for fast correction of the segmentation. In addition, we propose a new distance map that is computed only in the plane that locally best approximates the calcified cartilage. This distance map drastically improves the separation of individual tesserae. We apply our segmentation pipeline to hyomandibulae from three individuals of the round stingray (Urobatis halleri), varying both in age and size.
Results – Each of the hyomandibula datasets contains approximately 3000 tesserae. To evaluate the quality of the automated segmentation, four expert users manually generated ground truth segmentations of small parts of one hyomandibula. These ground truth segmentations allowed us to compare the segmentation quality w.r.t. individual tesserae. Additionally, to investigate the segmentation quality of whole skeletal elements, landmarks were manually placed on all tesserae and their positions were then compared to the segmented tesserae. With the proposed segmentation pipeline, we sped up the processing of a single skeletal element from days or weeks to a few hours.
Supplementary data to reproduce and understand key results from the related publication, including original image data and processed data. In particular, sections from hyomandibulae harvested from specimens of round stingray Urobatis halleri, donated from another study (DOI: 10.1002/etc.2564). Specimens were from sub-adults/adults collected by beach seine from collection sites in San Diego and Seal Beach, California, USA. The hyomandibulae were mounted in clay, sealed in ethanol-humidified plastic tubes and scanned with a Skyscan 1172 desktop μCT scanner (Bruker μCT, Kontich, Belgium) in association with another study (DOI: 10.1111/joa.12508). Scans for all samples were performed with voxel sizes of 4.89 μm at 59 kV source voltage and 167 μA source current, over 360◦ sample 120 rotation. For our segmentations, the datasets were resampled to a voxel size of 9.78 μm to reduce the size of the images and speed up processing. In addition, the processed data that was generated with the visualization software Amira with techniques described in the related publication based on the mentioned specimens.