Refine
Year of publication
Document Type
- Article (23)
- In Proceedings (12)
- ZIB-Report (2)
Language
- English (37)
Is part of the Bibliography
- no (37)
The Moon as our nearest celestial object is one of the most important bodies for space resource exploration and planetary science. However, knowledge of the physical properties of the lunar regolith is required for the exploitation of lunar resources and for understanding the Moon's geologic history. This knowledge comes mainly from Apollo in-situ experiments and returned samples, but the global distribution of these properties is still poorly understood. Remote sensing measurements offer the opportunity to derive properties of unsampled areas with the help of models.
In our study, a microphysical thermal model for the lunar regolith was developed and the simulated surface temperatures were compared with thermal emission measurements from the Diviner radiometer on board the Lunar Reconnaissance Orbiter (LRO) to derive regolith properties. This work expands upon previous investigations of lunar regolith properties using Diviner data, by more directly simulating physical properties such as particle size and porosity.
The microphysical structure of the lunar regolith provides information on the geologic history of the Moon. We used remote sensing measurements of thermal emission and a thermophysical model to determine the microphysical properties of the lunar regolith. We expand upon previous investigations by developing a microphysical thermal model, which more directly simulates regolith properties, such as grain size and volume filling factor. The modeled temperatures are matched with surface temperatures measured by the Diviner Lunar Radiometer Experiment on board the Lunar Reconnaissance Orbiter. The maria and highlands are investigated separately and characterized in the model by a difference in albedo and grain density. We find similar regolith temperatures for both terrains, which can be well described by similar volume filling factor profiles and mean grain sizes obtained from returned Apollo samples. We also investigate a significantly lower thermal conductivity for highlands, which formally also gives a very good solution, but in a parameter range that is well outside the Apollo data. We then study the latitudinal dependence of regolith properties up to ±80° latitude. When assuming constant regolith properties, we find that a variation of the solar incidence-dependent albedo can reduce the initially observed latitudinal gradient between model and Diviner measurements significantly. A better match between measurements and model can be achieved by a variation in intrinsic regolith properties with a decrease in bulk density with increasing latitude. We find that a variation in grain size alone cannot explain the Diviner measurements at higher latitudes.
Regolith is formed through weathering of the local rock by meteorite bombardment, space weathering (Pieters & Noble, 2016) and thermal erosion (Delbo et al., 2014). In the case of the Moon, the space weathering effects and diurnal temperature variations are reduced towards the poles. The aim of this study is to investigate whether the lunar regolith properties derived from the comparison of regolith temperatures measured by the Diviner radiometer (Paige et al., 2010) on board the Lunar Reconnaissance Orbiter (LRO) with simulated temperatures derived from a microphysical thermal model show a latitudinal dependence. The developed microphysical thermal model expands upon previous models by more directly simulating regolith properties, such as grain radius and volume filling factor.
Branched Flow
(2019)
In many physical situations involving diverse length scales, waves or rays representing them travel through media characterized by spatially smooth, random, modest refractive index variations. "Primary" diffraction (by individual sub-wavelength features) is absent. Eventually the weak refraction leads to imperfect focal "cusps". Much later, a statistical regime characterized by momentum diffusion is manifested. An important intermediate regime is often overlooked, one that is diffusive only in an ensemble sense. Each realization of the ensemble possesses dramatic ray limit structure that guides the waves (in the same sense that ray optics is used to design lens systems). This structure is a universal phenomenon called branched flow. Many important phenomena develop in this intermediate regime. Here we give examples and some of the physics of this emerging field.
Context. Cometary outgassing is induced by the sublimation of ices and the ejection of dust originating from the nucleus. Therefore measuring the composition and dynamics of the cometary gas provides information concerning the interior composition of the body. Nevertheless, the bulk composition differs from the coma composition, and numerical models are required to simulate the main physical processes induced by the illumination of the icy body.
Aims. The objectives of this study are to bring new constraints on the interior composition of the nucleus of comet 67P/Churyumov-Gerasimenko (hereafter 67P) by comparing the results of a thermophysical model applied to the nucleus of 67P and the coma measurements made by the Reflectron-type Time-Of-Flight (RTOF) mass spectrometer. This last is one of the three instruments of the Rosetta Orbiter Spectrometer for Ion and Neutral Analysis (ROSINA), used during the Rosetta mission.
Methods. Using a thermophysical model of the comet nucleus, we studied the evolution of the stratigraphy (position of the sublimation and crystallisation fronts), the temperature of the surface and subsurface, and the dynamics and spatial distribution of the volatiles (H2O, CO2 and CO). We compared them with the in situ measurements from ROSINA/RTOF and an inverse coma model.
Results. We observed the evolution of the surface and near surface temperature, and the deepening of sublimation fronts. The thickness of the dust layer covering the surface strongly influences the H2O outgassing but not the more volatiles species. The CO outgassing is highly sensitive to the initial CO/H2O ratio, as well as to the presence of trapped CO in the amorphous ice.
Conclusions. The study of the influence of the initial parameters on the computed volatile fluxes and the comparison with ROSINA/RTOF measurements provide a range of values for an initial dust mantle thickness and a range of values for the volatile ratio. These imply the presence of trapped CO. Nevertheless, further studies are required to reproduce the strong change of behaviour observed in RTOF measurements between September 2014 and February 2015.
Transient capture of electrons in magnetic fields, or: comets in the restricted three-body problem
(2020)
The motion of celestial bodies in astronomy is closely related to the orbits
of electrons encircling an atomic nucleus. Bohr and Sommerfeld presented a
quantization scheme of the classical orbits to analyze the eigenstates of the
hydrogen atom. Here we discuss another close connection of classical
trajectories and quantum mechanical states: the transient dynamics of objects
around a nucleus. In this setup a comet (or an electron) is trapped for a while
in the vicinity of parent object (Jupiter or an atomic nucleus), but eventually
escapes after many revolutions around the center of attraction.
We study in experiment and theory thermal energy and charge transfer close to the quantum limit in a ballistic nanodevice, consisting of multiply connected one-dimensional electron waveguides. The fabricated device is based on an AlGaAs/GaAs heterostructure and is covered by a global top-gate to steer the thermal energy and charge transfer in the presence of a temperature gradient, which is established by a heating current. The estimate of the heat transfer by means of thermal noise measurements shows the device acting as a switch for charge and thermal energy transfer. The wave-packet simulations are based on the multi-terminal Landauer-Büttiker approach and confirm the experimental finding of a mode-dependent redistribution of the thermal energy current, if a scatterer breaks the device symmetry.
The determination of non-gravitational forces based on precise astrometry is one of the main tools to establish the cometary character of interstellar and solar-system objects. The Rosetta mission to comet 67P/C-G provided the unique opportunity to benchmark Earth-bound estimates of non-gravitational forces with in-situ data. We determine the accuracy of the standard Marsden and Sekanina parametrization of non-gravitational forces with respect to the observed dynamics. Additionally we analyse the rotation-axis changes (orientation and period) of 67P/C-G. This comparison provides a reference case for future cometary missions and sublimation models for non-gravitational forces.
Cometary activity affects the orbital motion and rotation state due to sublimation induced forces. The availability of precise rotation-axis orientation and position data from the Rosetta mission allows one to accurately determine the outgassing of comet Churyumov-Gerasimenko/67P (67P).
We derive the observed non-gravitational acceleration of 67P directly from the Rosetta spacecraft trajectory. From the non-gravitational acceleration we recover the diurnal outgassing variations and study a possible delay of the sublimation response with respect to the peak solar illumination. This allows us to compare the non-gravitational acceleration of 67P with expectations based on empirical models and common assumptions about the sublimation process.
We use an iterative orbit refinement and Fourier decomposition of the diurnal activity to derive the outgassing induced non-gravitational acceleration. The uncertainties of the data reduction are established by a sensitivity analysis of an ensemble of best-fit orbits for comet 67P.
We find that the Marsden non-gravitational acceleration parameters reproduce part of the non-gravitational acceleration but need to be augmented by an analysis of the nucleus geometry and surface illumination to draw conclusions about the sublimation process on the surface. The non-gravitational acceleration follows closely the subsolar latitude (seasonal illumination), with a small lag angle with respect to local noon around perihelion. The observed minor changes of the rotation axis do not favor forced precession models for the non-gravitational acceleration.
In contrast to the sublimation induced torques, the non-gravitational acceleration does not put strong constraints on localized active areas on the nucleus. We find a close agreement of the orbit deduced non-gravitational acceleration and the water production independently derived from Rosetta in-situ measurement.
Matching the activity of comet 67P/Churyumov-Gerasimenko with long-term ground-based astrometry
(2021)
50 years of astrometric data for comet 67P/C-G (orbital period about 6.45 years) provides a unique opportunity to benchmark non-gravitational acceleration models to the in situ measurements of the volatile release performed from the Rosetta rendezvous mission (2014-2016). Taken together, the Earth-bound and in-situ data yields lower fit errors and serves as a test-case for our ability to deduce thermophysical quantities of cometary nuclei from the Earth-bound observations.