Refine
Year of publication
Document Type
- Article (55) (remove)
Language
- English (55)
Has Fulltext
- no (55)
Is part of the Bibliography
- no (55)
Keywords
Institute
- Numerical Mathematics (55) (remove)
Pulse thermography of concrete structures is used in civil engineering for detecting voids, honeycombing and delamination. The physical situation is readily modeled by Fourier's law. Despite the simplicity of the PDE structure, quantitatively realistic numerical 3D simulation faces two major obstacles. First, the short heating pulse induces a thin boundary layer at the heated surface which encapsulates all information and therefore has to be resolved faithfully. Even with adaptive mesh refinement techniques, obtaining useful accuracies requires an unsatisfactorily fine discretization. Second, bulk material parameters and boundary conditions are barely known exactly. We address both issues by a semi-analytic reformulation of the heat transport problem and by parameter identification. Numerical results are compared with measurements of test specimens.
In optimal control problems with nonlinear time-dependent 3D PDEs, full 4D discretizations are usually prohibitive due to the storage requirement. For this reason gradient and quasi-Newton methods working on the reduced functional are often employed. The computation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. The state enters into the adjoint equation, again requiring the storage of a full 4D data set. We propose a lossy compression algorithm using an inexact but cheap predictor for the state data, with additional entropy coding of prediction errors. As the data is used inside a discretized, iterative algorithm, lossy coding maintaining an error bound is sufficient.
In several inital value problems with particularly expensive right hand side evaluation or implicit step computation, there is a trade-off between accuracy and computational effort. We consider inexact spectral deferred correction (SDC) methods for solving such initial value problems. SDC methods are interpreted as fixed point iterations and, due to their corrective iterative nature, allow to exploit the accuracy-work-tradeoff for a reduction of the total computational effort. On one hand we derive error models bounding the total error in terms of the evaluation errors. On the other hand, we define work models describing the computational effort in terms of the evaluation accuracy. Combining both, a theoretically optimal local tolerance selection is worked out by minimizing the total work subject to achieving the requested tolerance. The properties of optimal local tolerances and the predicted efficiency gain compared to simpler heuristics, and a reasonable practical performance, are illustrated on simple numerical examples.
Estimation of time of death based on a single measurement of body
core temperature is a standard procedure in forensic medicine.
Mechanistic models using simulation of heat transport promise
higher accuracy than established phenomenological models in
particular in nonstandard situations, but involve many not exactly
known physical parameters. Identifying both time of death and
physical parameters from multiple temperature measurements is
one possibility to reduce the uncertainty significantly.
In this paper, we consider the inverse problem in a Bayesian setting
and perform both local and sampling-based uncertainty
quantification, where proper orthogonal decomposition is used as
model reduction for fast solution of the forward model. Based on
the local uncertainty quantification, optimal design of experiments
is performed in order to minimize the uncertainty in the time of
death estimate for a given number of measurements. For reasons
of practicability, temperature acquisition points are selected from
a set of candidates in different spatial and temporal locations.
Applied to a real corpse model, a significant accuracy improvement
is obtained already with a small number of measurements.
Temperature-based estimation of time of death (ToD) can be per-
formed either with the help of simple phenomenological models of corpse
cooling or with detailed mechanistic (thermodynamic) heat transfer mod-
els. The latter are much more complex, but allow a higher accuracy of
ToD estimation as in principle all relevant cooling mechanisms can be
taken into account.
The potentially higher accuracy depends on the accuracy of tissue and
environmental parameters as well as on the geometric resolution. We in-
vestigate the impact of parameter variations and geometry representation
on the estimated ToD based on a highly detailed 3D corpse model, that
has been segmented and geometrically reconstructed from a computed to-
mography (CT) data set, differentiating various organs and tissue types.