Refine
Document Type
- ZIB-Report (19)
Language
- English (19) (remove)
Has Fulltext
- yes (19) (remove)
Is part of the Bibliography
- no (19)
Keywords
- Mixed-Integer Nonlinear Programming (4)
- System Dynamics (4)
- Network Design (2)
- Relaxations (2)
- System Dynamics; Mixed-Integer Nonlinear Optimization (2)
- Bounds Strengthening (1)
- Cutting Planes (1)
- Duality (1)
- Entry-Exit Model (1)
- Gas Distribution Networks (1)
- Gas Market Liberalization (1)
- Gas Network Access Regulation (1)
- Global Optimal Control (1)
- Heuristics (1)
- Integer Programming (1)
- Life Cycle Sustainability Assessment (1)
- Mathematical Optimization (1)
- Mixed-Integer Linear Programming (1)
- Mixed-Integer Nonlinear Nonconvex Stochastic Optimization (1)
- Mixed-Integer Nonlinear Optimization (1)
- Modelling (1)
- Multi-Criteria Optimisation (1)
- Non-Cooperative Two-Person Games; Mixed-Integer Nonlinear Optimization (1)
- Nonlinear Network Design Applications (1)
- Nonlinear Network Flow (1)
- Nonlinear Optimization (1)
- Nonlinear Programming (1)
- Optimal Control (1)
- Piecewise Linear Approximation (1)
- Polyhedral Combinatorics (1)
- Protein Folding (1)
- Scenario Technique; System Dynamics (1)
- Self-Avoiding Path (1)
- Spline Interpolation (1)
- Sustainability Indicator (1)
- Sustainability Indicators (1)
- Topology Optimization (1)
- Topology Planning (1)
- Value Creation Process (1)
- eulerian multigraphs (1)
- freight train routing (1)
- multi-commodity flows (1)
- scheduling (1)
Institute
- Mathematical Optimization (19) (remove)
We consider a system dynamics model that describes the effect of human activity on natural resources. The central stocks are the accumulated profit, the industry structures, and the water resources. The model can be controlled through two time-dependent parameters. The goal in this paper is to find a parameter setting that leads to a maximization of a performance index, which reflects both environmental and economic aspects. Thus, the goal is to identify the most sustainable stock of industry structures within the model's constraints and assumptions. In order to find a proven global optimal parameter set, we formulate the System Dynamics Optimization model as a mixed-integer nonlinear problem that is accessible for numerical solvers. Due to the dynamic structure of the model, certain steps of the solution process must be handled with greater care, compared to standard non-dynamic problems. We describe our approach of solving the industry structure model and present computational results. In addition, we discuss the limitations of the approach and next steps.
The System Dynamics (SD) methodology is a framework for modeling and simulating the dynamic behavior of socioeconomic systems. Characteristic for the description of such systems is the occurrence of feedback loops together with stocks and flows. The mathematical equations that describe the system are usually ordinary differential equations and nonlinear algebraic constraints. Therefore seemingly simple systems can show a nonintuitive, unpredictable behavior over time. Controlling a dynamical system means to specify potential interventions from outside that should keep the system on the desired track, and to define an evaluation schema to compare different controls among each other, so that a "best" control can be defined in a meaningful way. The central question is how to compute such globally optimal control for a given SD model, that allows the transition of the system into a desired state with minimum effort. We propose a mixed-integer nonlinear programming (MINLP) reformulation of the System Dynamics Optimization (SDO) problem. MINLP problems can be solved by linear programming based branch-and-bound approach. We demonstrate that standard MINLP solvers are not able to solve SDO problem. To overcome this obstacle, we introduce a special-tailored bound propagation method. We apply our new method to a predator-prey model with additional hunting activity as control, and to a mini-world model with the consumption level as control. Numerical results for these test cases are presented.
We consider a nonlinear nonconvex network design problem that arises in the extension of natural gas transmission networks. Given is such network with active and passive components, that is, valves, compressors, pressure regulators (active) and pipelines (passive), and a desired amount of flow at certain specified entry and exit nodes of the network. Besides flow conservation constraints in the nodes the flow must fulfill nonlinear nonconvex pressure loss constraints on the arcs subject to potential values (i.e., pressure levels) in both end nodes of each arc. Assume that there does not exist a feasible flow that fulfills all physical constraints and meets the desired entry and exit amounts. Then a natural question is where to extend the network by adding pipes in the most economic way such that this flow becomes feasible. Answering this question is computationally demanding because of the difficult problem structure. We use mixed-integer nonlinear programming techniques that rely on an outer approximation of the overall problem, and a branching on decision variables. We formulate a new class of valid inequalities (or cutting planes) which reduce the overall solution time when added to the formulation. We demonstrate the computational merits of our approach on test instances.
We present a novel heuristic algorithm to identify feasible solutions of a mixed-integer nonlinear programming problem arising in natural gas transportation: the selection of new pipelines to enhance the network's capacity to a desired level in a cost-efficient way. We solve this problem in a linear programming based branch-and-cut approach, where we deal with the nonlinearities by linear outer approximation and spatial branching. At certain nodes of the branching tree, we compute a KKT point for a nonlinear relaxation. Based on the information from the KKT point we alter some of the integer variables in a locally promising way. We describe this heuristic for general MINLPs and then show how to tailor the heuristic to exploit our problem-specific structure. On a test set of real-world instances, we are able to increase the chance of identifying feasible solutions by some order of magnitude compared to standard MINLP heuristics that are already built in the general-purpose MINLP solver SCIP.
The Scenario Technique is a strategic planning method that aims to describe and analyze potential developments of a considered system in the future. Its application consists of several steps, from an initial problem analysis over an influence analysis to projections of key factors and a definition of the scenarios to a final interpretation of the results. The technique itself combines qualitative and quantitative methods and is an enhancement of the standard Scenario Technique. We use the numerical values gathered during the influence analysis, and embed them in a System Dynamics framework. This yields a mathematically rigorous way to achieve predictions of the system‘s future behavior from an initial impulse and the feedback structure of the factors. The outcome of our new method is a further way of projecting the present into the future, which enables the user of the Scenario Technique to obtain a validation of the results achieved by the standard method.
We consider a nonlinear nonconvex network flow problem that arises, for example, in natural gas or water transmission networks. Given is such network with active and passive components, that is, valves, compressors, pressure regulators (active) and pipelines (passive), and a desired amount of flow at certain specified entry and exit nodes of the network. Besides flow conservation constraints in the nodes the flow must fulfill nonlinear nonconvex pressure loss constraints on the arcs subject to potential values (i.e., pressure levels) in both end nodes of each arc. The problem is how to numerically compute this flow and pressures. We review an existing approach of Maugis (1977) and extend it to the case of networks with active elements (for example, compressors). We further examine different ways of relaxations for the nonlinear network flow model. We compare different approaches based on nonlinear optimization numerically on a set of test instances.
We consider problems concerning the scheduling of a set of trains on a single track. For every pair of trains there is a minimum headway, which every train must wait before it enters the track after another train. The speed of each train is also given. Hence for every schedule - a sequence of trains - we may compute the time that is at least needed for all trains to travel along the track in the given order. We give the solution to three problems: the fastest schedule, the average schedule, and the problem of quantile schedules. The last problem is a question about the smallest upper bound on the time of a given fraction of all possible schedules. We show how these problems are related to the travelling salesman problem. We prove NP-completeness of the fastest schedule problem, NP-hardness of quantile of schedules problem, and polynomiality of the average schedule problem. We also describe some algorithms for all three problems. In the solution of the quantile problem we give an algorithm, based on a reverse search method, generating with polynomial delay all Eulerian multigraphs with the given degree sequence and a bound on the number of such multigraphs. A better bound is left as an open question.
Gas distribution networks are complex structures that consist of
passive pipes, and active, controllable elements such as valves and
compressors. Controlling such network means to find a suitable setting
for all active components such that a nominated amount of gas can be
transmitted from entries to exits through the network, without
violating physical or operational constraints. The control of a
large-scale gas network is a challenging task from a practical point
of view. In most companies the actual controlling process is supported
by means of computer software that is able to simulate the flow of the
gas. However, the active settings have to be set manually within such
simulation software. The solution quality thus depends on the
experience of a human planner.
When the gas network is insufficient for the transport then topology
extensions come into play. Here a set of new pipes or active elements
is determined such that the extended network admits a feasible control
again. The question again is how to select these extensions and where
to place them such that the total extension costs are
minimal. Industrial practice is again to use the same simulation
software, determine extensions by experience, add them to the virtual
network, and then try to find a feasible control of the active
elements. The validity of this approach now depends even more on the
human planner.
Another weakness of this manual simulation-based approach is that it
cannot establish infeasibility of a certain gas nomination, unless all
settings of the active elements are tried. Moreover, it is impossible
to find a cost-optimal network extension in this way.
In order to overcome these shortcomings of the manual planning
approach we present a new approach, rigorously based on mathematical
optimization. Hereto we describe a model for finding feasible
controls and then extend this model such that topology extensions can
additionally and simultaneously be covered. Numerical results for real-world instances are presented and
discussed.
It is clear that a transformation to sustainable value creation is needed, because business as usual is not an option for preserving competitive advantages of leading industries. What does that mean? This contribution proposes possible approaches for a shift in existing manufacturing paradigms. In a first step, sustainability aspects from the German Sustainability Strategy and from the tools of life cycle sustainability assessment are chosen to match areas of a value creation process. Within these aspects are indicators, which can be measured within a manufacturing process. Once these data are obtained they can be used to set up a mathematical linear pulse model of manufacturing in order to analyse the evolution of the system over time, that is the transition process, by using a system dynamics approach. An increase of technology development by a factor of 2 leads to an increase of manufacturing but also to an increase of climate change. Compensation measures need to be taken. This can be done by e.g. taking money from the GDP (as an indicator of the aspect ``macroeconomic performance''). The value of the arc from that building block towards climate change must then be increased by a factor of 10. The choice of independent and representative indicators or aspects shall be validated and double-checked for their significance with the help of multi-criteria mixed-integer programming optimisation methods.
Identification of trade-offs for sustainable manufacturing of a Bamboo Bike by System Dynamics
(2013)
We develop a generic System Dynamic model to simulate the production, machines, employees, waste, and capital flows of a manufacturing company. In a second step, this model is specialised by defining suit-able input data to represent a bicycle manufacturing company in a developing country. We monitor a set of sustainability indicators to understand the social, environmental and economic impact of the company, and to estimate managerial decisions to be taken in order to improve on these criteria. We show that the social and environmental situation can be improved over time without sacrificing the economic success of the company's business.