TY - GEN A1 - Weiser, Martin T1 - On goal-oriented adaptivity for elliptic optimal control problems N2 - The paper proposes goal-oriented error estimation and mesh refinement for optimal control problems with elliptic PDE constraints using the value of the reduced cost functional as quantity of interest. Error representation, hierarchical error estimators, and greedy-style error indicators are derived and compared to their counterparts when using the all-at-once cost functional as quantity of interest. Finally, the efficiency of the error estimator and generated meshes are demonstrated on numerical examples. T3 - ZIB-Report - 09-08 KW - optimal control KW - error estimation KW - adaptive mesh refinement Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-11192 SN - 1438-0064 ER - TY - GEN A1 - Schiela, Anton A1 - Weiser, Martin T1 - Barrier methods for a control problem from hyperthermia treatment planning N2 - We consider an optimal control problem from hyperthermia treatment planning and its barrier regularization. We derive basic results, which lay the groundwork for the computation of optimal solutions via an interior point path-following method. Further, we report on a numerical implementation of such a method and its performance at an example problem. T3 - ZIB-Report - 09-36 KW - hyperthermia treatment planning KW - optimal control KW - barrier methods Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-11567 SN - 1438-0064 ER - TY - GEN A1 - Weiser, Martin T1 - Optimization and Identification in Regional Hyperthermia N2 - Regional hyperthermia is a cancer therapy aiming at heating tumors using phased array applicators. This article provides an overview over current mathematical challenges of delivering individually optimal treatments. The focus is on therapy planning and identification of technical as well as physiological quantities from MR thermometry measurements. T3 - ZIB-Report - 08-40 KW - Hyperthermie-Therapieplanung KW - Identifizierung KW - MR-Thermometrie KW - Innere-Punkte-Methoden KW - hyperthermia treatment planning KW - identification KW - MR thermometry KW - interior point methods Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-10916 SN - 1438-0064 ER - TY - GEN A1 - Götschel, Sebastian A1 - Weiser, Martin A1 - Schiela, Anton T1 - Solving Optimal Control Problems with the Kaskade 7 Finite Element Toolbox N2 - This paper presents concepts and implementation of the finite element toolbox Kaskade 7, a flexible C++ code for solving elliptic and parabolic PDE systems. Issues such as problem formulation, assembly and adaptivity are discussed at the example of optimal control problems. Trajectory compression for parabolic optimization problems is considered as a case study. T3 - ZIB-Report - 10-25 KW - partial differential equations KW - optimal control KW - finite elements KW - generic programming KW - adaptive methods Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-11909 SN - 1438-0064 ER - TY - GEN A1 - Weiser, Martin A1 - Götschel, Sebastian T1 - State Trajectory Compression for Optimal Control with Parabolic PDEs N2 - In optimal control problems with nonlinear time-dependent 3D PDEs, full 4D discretizations are usually prohibitive due to the storage requirement. For this reason gradient and quasi-Newton methods working on the reduced functional are often employed. The computation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. The state enters into the adjoint equation, again requiring the storage of a full 4D data set. We propose a lossy compression algorithm using an inexact but cheap predictor for the state data, with additional entropy coding of prediction errors. As the data is used inside a discretized, iterative algorithm, lossy coding maintaining an error bound is sufficient. T3 - ZIB-Report - 10-05 KW - optimal control KW - adjoint gradient computation KW - trajectory storage Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-11676 SN - 1438-0064 ER - TY - GEN A1 - Deuflhard, Peter A1 - Schiela, Anton A1 - Weiser, Martin T1 - Mathematical Cancer Therapy Planning in Deep Regional Hyperthermia N2 - This paper surveys the required mathematics for a typical challenging problem from computational medicine, the cancer therapy planning in deep regional hyperthermia. In the course of many years of close cooperation with clinics, the medical problem gave rise to quite a number of subtle mathematical problems, part of which had been unsolved when the common project started. Efficiency of numerical algorithms, i.e. computational speed and monitored reliability, play a decisive role for the medical treatment. Off-the-shelf software had turned out to be not sufficient to meet the requirements of medicine. Rather, new mathematical theory as well as new numerical algorithms had to be developed. In order to make our algorithms useful in the clinical environment, new visualization software, a virtual lab, including 3D geometry processing of individual virtual patients had to be designed and implemented. Moreover, before the problems could be attacked by numerical algorithms, careful mathematical modelling had to be done. Finally, parameter identification and constrained optimization for the PDEs had to be newly analyzed and realized over the individual patient's geometry. Our new techniques had an impact on the specificity of the individual patients' treatment and on the construction of an improved hyperthermia applicator. T3 - ZIB-Report - 11-39 KW - hyperthermia therapy planning KW - mathematical modelling KW - Maxwell equations KW - state constraints KW - parameter identification Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-14204 SN - 1438-0064 ER - TY - GEN A1 - Lubkoll, Lars A1 - Schiela, Anton A1 - Weiser, Martin T1 - An optimal control problem in polyconvex hyperelasticity N2 - We consider a shape implant design problem that arises in the context of facial surgery. We introduce a reformulation as an optimal control problem, where the control acts as a boundary force. The state is modelled as a minimizer of a polyconvex hyperelastic energy functional. We show existence of optimal solutions and derive - on a formal level - first order optimality conditions. Finally, preliminary numerical results are presented. T3 - ZIB-Report - 12-08 KW - polyconvex elasticity KW - implant design KW - optimal control Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-14745 SN - 1438-0064 ER - TY - GEN A1 - Weiser, Martin A1 - Gänzler, Tobias A1 - Schiela, Anton T1 - A Control Reduced Primal Interior Point Method for PDE Constrained Optimization N2 - A primal interior point method for control constrained optimal control problems with PDE constraints is considered. Pointwise elimination of the control leads to a homotopy in the remaining state and dual variables, which is addressed by a short step pathfollowing method. The algorithm is applied to the continuous, infinite dimensional problem, where discretization is performed only in the innermost loop when solving linear equations. The a priori elimination of the least regular control permits to obtain the required accuracy with comparable coarse meshes. Convergence of the method and discretization errors are studied, and the method is illustrated at two numerical examples. T3 - ZIB-Report - 04-38 KW - interior point methods in function space KW - optimal control KW - finite elements KW - discretization error Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-8138 ER - TY - GEN A1 - Götschel, Sebastian A1 - Nagaiah, Chamakuri A1 - Kunisch, Karl A1 - Weiser, Martin T1 - Lossy Compression in Optimal Control of Cardiac Defibrillation N2 - This paper presents efficient computational techniques for solving an optimization problem in cardiac defibrillation governed by the monodomain equations. Time-dependent electrical currents injected at different spatial positions act as the control. Inexact Newton-CG methods are used, with reduced gradient computation by adjoint solves. In order to reduce the computational complexity, adaptive mesh refinement for state and adjoint equations is performed. To reduce the high storage and bandwidth demand imposed by adjoint gradient and Hessian-vector evaluations, a lossy compression technique for storing trajectory data is applied. An adaptive choice of quantization tolerance based on error estimates is developed in order to ensure convergence. The efficiency of the proposed approach is demonstrated on numerical examples. T3 - ZIB-Report - 13-26 KW - monodomain model KW - defibrillation KW - optimal control KW - Newton-CG KW - trajectory storage KW - compression Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-18566 SN - 1438-0064 ER - TY - GEN A1 - Götschel, Sebastian A1 - Weiser, Martin T1 - Lossy Compression for PDE-constrained Optimization: Adaptive Error Control N2 - For the solution of optimal control problems governed by nonlinear parabolic PDEs, methods working on the reduced objective functional are often employed to avoid a full spatio-temporal discretization of the problem. The evaluation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the ad-joint equation. The state enters into the adjoint equation, requiring the storage of a full 4D data set. If Newton-CG methods are used, two additional trajectories have to be stored. To get numerical results which are accurate enough, in many case very fine discretizations in time and space are necessary, which leads to a significant amount of data to be stored and transmitted to mass storage. Lossy compression methods were developed to overcome the storage problem by reducing the accuracy of the stored trajectories. The inexact data induces errors in the reduced gradient and reduced Hessian. In this paper, we analyze the influence of such a lossy trajectory compression method on Newton-CG methods for optimal control of parabolic PDEs and design an adaptive strategy for choosing appropriate quantization tolerances. T3 - ZIB-Report - 13-27 KW - optimal control KW - semilinear parabolic PDEs KW - Newton-CG KW - trajectory storage KW - lossy compression Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-18575 SN - 1438-0064 ER - TY - GEN A1 - Schneck, Jakob A1 - Weiser, Martin A1 - Wende, Florian T1 - Impact of mixed precision and storage layout on additive Schwarz smoothers N2 - The growing discrepancy between CPU computing power and memory bandwidth drives more and more numerical algorithms into a bandwidth- bound regime. One example is the overlapping Schwarz smoother, a highly effective building block for iterative multigrid solution of elliptic equations with higher order finite elements. Two options of reducing the required memory bandwidth are sparsity exploiting storage layouts and representing matrix entries with reduced precision in floating point or fixed point format. We investigate the impact of several options on storage demand and contraction rate, both analytically in the context of subspace correction methods and numerically at an example of solid mechanics. Both perspectives agree on the favourite scheme: fixed point representation of Cholesky factors in nested dissection storage. T3 - ZIB-Report - 18-62 KW - higher order finite elements KW - mixed precision KW - overlapping Schwarz smoother Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-71305 SN - 1438-0064 ER - TY - JOUR A1 - Götschel, Sebastian A1 - Weiser, Martin T1 - Compression Challenges in Large Scale Partial Differential Equation Solvers JF - Algorithms N2 - Solvers for partial differential equations (PDEs) are one of the cornerstones of computational science. For large problems, they involve huge amounts of data that need to be stored and transmitted on all levels of the memory hierarchy. Often, bandwidth is the limiting factor due to the relatively small arithmetic intensity, and increasingly due to the growing disparity between computing power and bandwidth. Consequently, data compression techniques have been investigated and tailored towards the specific requirements of PDE solvers over the recent decades. This paper surveys data compression challenges and discusses examples of corresponding solution approaches for PDE problems, covering all levels of the memory hierarchy from mass storage up to the main memory. We illustrate concepts for particular methods, with examples, and give references to alternatives. Y1 - 2019 U6 - https://doi.org/10.3390/a12090197 VL - 12 IS - 9 SP - 197 ER - TY - GEN A1 - Götschel, Sebastian A1 - von Tycowicz, Christoph A1 - Polthier, Konrad A1 - Weiser, Martin T1 - Reducing Memory Requirements in Scientific Computing and Optimal Control N2 - In high accuracy numerical simulations and optimal control of time-dependent processes, often both many time steps and fine spatial discretizations are needed. Adjoint gradient computation, or post-processing of simulation results, requires the storage of the solution trajectories over the whole time, if necessary together with the adaptively refined spatial grids. In this paper we discuss various techniques to reduce the memory requirements, focusing first on the storage of the solution data, which typically are double precision floating point values. We highlight advantages and disadvantages of the different approaches. Moreover, we present an algorithm for the efficient storage of adaptively refined, hierarchic grids, and the integration with the compressed storage of solution data. T3 - ZIB-Report - 13-64 KW - optimal control KW - trajectory storage KW - mesh compression KW - compression Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-42695 SN - 1438-0064 ER - TY - GEN A1 - Sali, Adrian T1 - Coupling of Monodomain and Eikonal Models for Cardiac Electrophysiology N2 - The primary goal of this paper is to study the coupling of monodomain and eikonal models for the numerical simulation of cardiac electrophysiology. Eikonal models are nonlinear elliptic equations describing the excitation time of the cardiac tissue. They are often used as very fast approximations for monodomain or bidomain models - parabolic reaction-diffusion systems describing the excitation wavefront in terms of ionic currents. The excitation front is a thin region with high gradients, whereas excitation times vary over larger domains. Hence, eikonal equations can be solved on much coarser grids than monodomain equations. Moreover, as eikonal models are not time-dependent, no time integration is needed. Eikonal models are derived from monodomain models making additional assumptions and using certain approximations. While generally the approximation is rather good, several specific situations are not well captured by eikonal models. We consider coupling the two models, i.e. using the monodomain model in regions where more accurate results or the shape of the wavefront are needed, and the eikonal model in the remaining parts of the domain, where the excitation time is sufficient. Restricting the monodomain simulation to a small subdomain reduces the computational effort considerably. Numerical methods for the simulation of the individual models are presented, with the finite element method as the main ingredient. Coupling conditions as well as algorithms for implementing the coupling are explained. The approximation quality and efficiency of the coupled model is illustrated on simple geometries using an Aliev-Panfilov membrane model. T3 - ZIB-Report - 16-50 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-60508 SN - 1438-0064 ER - TY - THES A1 - Sali, Adrian T1 - Coupling of Monodomain and Eikonal Models for Cardiac Electrophysiology N2 - The primary goal of this paper is to study the coupling of monodomain and eikonal models for the numerical simulation of cardiac electrophysiology. Eikonal models are nonlinear elliptic equations describing the excitation time of the cardiac tissue. They are often used as very fast approximations for monodomain or bidomain models - parabolic reaction-diffusion systems describing the excitation wavefront in terms of ionic currents. The excitation front is a thin region with high gradients, whereas excitation times vary over larger domains. Hence, eikonal equations can be solved on much coarser grids than monodomain equations. Moreover, as eikonal models are not time-dependent, no time integration is needed. Eikonal models are derived from monodomain models making additional assumptions and using certain approximations. While generally the approximation is rather good, several specific situations are not well captured by eikonal models. We consider coupling the two models, i.e. using the monodomain model in regions where more accurate results or the shape of the wavefront are needed, and the eikonal model in the remaining parts of the domain, where the excitation time is sufficient. Restricting the monodomain simulation to a small subdomain reduces the computational effort considerably. Numerical methods for the simulation of the individual models are presented, with the finite element method as the main ingredient. Coupling conditions as well as algorithms for implementing the coupling are explained. The approximation quality and efficiency of the coupled model is illustrated on simple geometries using an Aliev-Panfilov membrane model. Y1 - 2016 ER - TY - JOUR A1 - Schiela, Anton A1 - Weiser, Martin T1 - Superlinear convergence of the Control Reduced Interior Point Method for PDE Constrained Optimization JF - Computational Optimization and Applications Y1 - 2008 VL - 39 IS - 3 SP - 369 EP - 393 ER - TY - JOUR A1 - Weiser, Martin T1 - Pointwise Nonlinear Scaling for Reaction-Diffusion Equations JF - Appl. Num. Math. Y1 - 2009 VL - 59 IS - 8 SP - 1858 EP - 1869 ER - TY - JOUR A1 - Weiser, Martin A1 - Gänzler, Tobias A1 - Schiela, Anton T1 - A control reduced primal interior point method for a class of control constrained optimal control problems JF - Comput. Optim. Appl. Y1 - 2007 VL - 41 IS - 1 SP - 127 EP - 145 ER - TY - JOUR A1 - Weiser, Martin T1 - Optimization and Identification in Regional Hyperthermia JF - Int. J. Appl. Electromagn. and Mech. Y1 - 2009 VL - 30 SP - 265 EP - 275 ER - TY - CHAP A1 - Götschel, Sebastian A1 - Tycowicz, Christoph von A1 - Polthier, Konrad A1 - Weiser, Martin ED - Carraro, T. ED - Geiger, M. ED - Koerkel, S. ED - Rannacher, R. T1 - Reducing Memory Requirements in Scientific Computing and Optimal Control T2 - Multiple Shooting and Time Domain Decomposition Methods Y1 - 2015 SP - 263 EP - 287 PB - Springer ER - TY - JOUR A1 - Götschel, Sebastian A1 - Nagaiah, Chamakuri A1 - Kunisch, Karl A1 - Weiser, Martin T1 - Lossy Compression in Optimal Control of Cardiac Defibrillation JF - J. Sci. Comput. N2 - This paper presents efficient computational techniques for solving an optimization problem in cardiac defibrillation governed by the monodomain equations. Time-dependent electrical currents injected at different spatial positions act as the control. Inexact Newton-CG methods are used, with reduced gradient computation by adjoint solves. In order to reduce the computational complexity, adaptive mesh refinement for state and adjoint equations is performed. To reduce the high storage and bandwidth demand imposed by adjoint gradient and Hessian-vector evaluations, a lossy compression technique for storing trajectory data is applied. An adaptive choice of quantization tolerance based on error estimates is developed in order to ensure convergence. The efficiency of the proposed approach is demonstrated on numerical examples. Y1 - 2014 U6 - https://doi.org/10.1007/s10915-013-9785-x VL - 60 IS - 1 SP - 35 EP - 59 ER - TY - JOUR A1 - Götschel, Sebastian A1 - Weiser, Martin T1 - Lossy Compression for PDE-constrained Optimization: Adaptive Error Control JF - Comput. Optim. Appl. N2 - For the solution of optimal control problems governed by nonlinear parabolic PDEs, methods working on the reduced objective functional are often employed to avoid a full spatio-temporal discretization of the problem. The evaluation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the ad-joint equation. The state enters into the adjoint equation, requiring the storage of a full 4D data set. If Newton-CG methods are used, two additional trajectories have to be stored. To get numerical results which are accurate enough, in many case very fine discretizations in time and space are necessary, which leads to a significant amount of data to be stored and transmitted to mass storage. Lossy compression methods were developed to overcome the storage problem by reducing the accuracy of the stored trajectories. The inexact data induces errors in the reduced gradient and reduced Hessian. In this paper, we analyze the influence of such a lossy trajectory compression method on Newton-CG methods for optimal control of parabolic PDEs and design an adaptive strategy for choosing appropriate quantization tolerances. Y1 - 2015 VL - 62 IS - 1 SP - 131 EP - 155 PB - Springer ER - TY - JOUR A1 - Schenkl, Sebastian A1 - Muggenthaler, Holger A1 - Hubig, Michael A1 - Erdmann, Bodo A1 - Weiser, Martin A1 - Zachow, Stefan A1 - Heinrich, Andreas A1 - Güttler, Felix Victor A1 - Teichgräber, Ulf A1 - Mall, Gita T1 - Automatic CT-based finite element model generation for temperature-based death time estimation: feasibility study and sensitivity analysis JF - International Journal of Legal Medicine N2 - Temperature based death time estimation is based either on simple phenomenological models of corpse cooling or on detailed physical heat transfer models. The latter are much more complex, but allow a higher accuracy of death time estimation as in principle all relevant cooling mechanisms can be taken into account. Here, a complete work flow for finite element based cooling simulation models is presented. The following steps are demonstrated on CT-phantoms: • CT-scan • Segmentation of the CT images for thermodynamically relevant features of individual geometries • Conversion of the segmentation result into a Finite Element (FE) simulation model • Computation of the model cooling curve • Calculation of the cooling time For the first time in FE-based cooling time estimation the steps from the CT image over segmentation to FE model generation are semi-automatically performed. The cooling time calculation results are compared to cooling measurements performed on the phantoms under controlled conditions. In this context, the method is validated using different CTphantoms. Some of the CT phantoms thermodynamic material parameters had to be experimentally determined via independent experiments. Moreover the impact of geometry and material parameter uncertainties on the estimated cooling time is investigated by a sensitivity analysis. KW - temperature based death time estimation KW - finite element method KW - CT segmentation KW - sensitivity analysis Y1 - 2017 U6 - https://doi.org/doi:10.1007/s00414-016-1523-0 VL - 131 IS - 3 SP - 699 EP - 712 ER - TY - JOUR A1 - Götschel, Sebastian A1 - Schiela, Anton A1 - Weiser, Martin T1 - Kaskade 7 - a Flexible Finite Element Toolbox JF - Computers and Mathematics with Applications N2 - Kaskade 7 is a finite element toolbox for the solution of stationary or transient systems of partial differential equations, aimed at supporting application-oriented research in numerical analysis and scientific computing. The library is written in C++ and is based on the \textsc{Dune} interface. The code is independent of spatial dimension and works with different grid managers. An important feature is the mix-and-match approach to discretizing systems of PDEs with different ansatz and test spaces for all variables. We describe the mathematical concepts behind the library as well as its structure, illustrating its use at several examples on the way. Y1 - 2021 U6 - https://doi.org/10.1016/j.camwa.2020.02.011 VL - 81 SP - 444 EP - 458 ER - TY - THES A1 - Baumann, Felix T1 - Impact of Contact Surfaces on the Death Estimation N2 - The determination of time of death is one of the central tasks in forensic medicine. A standard method of time of death estimation elies on matching temperature measurements of the corpse with a post-mortem cooling model. In addition to widely used empirical post-mortem models, modelling based on a precise mathematical simulation of the cooling process have been gaining popularity. The simulation based cooling models and the resulting time of death estimates dependon a large variety of parameters. These include hermal properties for different body tissue types, environmental conditions such as temperature and air flow, and the presence of clothing and coverings. In this thesis we focus on a specific arameter - the contact between corpse and underground - and investigate its influence on the time of death estimation. Resulting we aim to answer the question whether it is necessary to consider contact mechanics in the underlying mathematical cooling model. KW - time of death estimation KW - contact mechanics KW - heat equation KW - inverse problems Y1 - 2020 ER - TY - THES A1 - Semler, Phillip T1 - Mixed finite elements in cloth simulation N2 - This master thesis investigates the use and behaviour of a mixed finite element formulation for the simulation of garments. The garment is modelled as an isotropic shell and is related to its mid-surface by energetic degeneration. Based on this, an energy functional is constructed, which contains the deformation and the mid-surface vector as degree of freedom. It is then shown why this problem does not correspond to a saddle point problem, but to a non-convex energy minimization. The implementation of the energy minimization takes place with the ZIB-internal FE framework Kaskade7.4, whereby a geometric linear and different geometric non-linear problems are examined, whereby for a selected, non-linear example a comparison is made with an existing implementation on basis of Morley elements. The further evaluations include the analysis of the quantitative and qualitative results, the used solution method, the behaviour of the system energy as well as the used CPU time. KW - cloth simulation KW - shell elements KW - mixed finite elements Y1 - 2020 ER - TY - CHAP A1 - Krause, Rolf A1 - Weiser, Martin T1 - Multilevel augmented Lagrangian solvers for overconstrained contact formulations T2 - ESAIM: ProcS N2 - Multigrid methods for two-body contact problems are mostly based on special mortar discretizations, nonlinear Gauss-Seidel solvers, and solution-adapted coarse grid spaces. Their high computational efficiency comes at the cost of a complex implementation and a nonsymmetric master-slave discretization of the nonpenetration condition. Here we investigate an alternative symmetric and overconstrained segment-to-segment contact formulation that allows for a simple implementation based on standard multigrid and a symmetric treatment of contact boundaries, but leads to nonunique multipliers. For the solution of the arising quadratic programs, we propose augmented Lagrangian multigrid with overlapping block Gauss-Seidel smoothers. Approximation and convergence properties are studied numerically at standard test problems. Y1 - 2021 U6 - https://doi.org/10.1051/proc/202171175 VL - 71 SP - 175 EP - 184 ER - TY - CHAP A1 - Müller, Jan A1 - Götschel, Sebastian A1 - Weiser, Martin A1 - Maierhofer, Christiane T1 - Thermografie mit optimierter Anregung für die quantitative Untersuchung von Delaminationen in kohlenstofffaserverstärkten Kunststoffen T2 - NDT.net Proc. DGZfP 2017 N2 - Da kohlenstofffaserverstärkte Kunststoffe (CFK) in anspruchsvollen sicherheitsrelevanten Einsatzgebieten wie im Automobilbau und in der Luftfahrt eingesetzt werden, besteht ein zunehmender Bedarf an zerstörungsfreien Prüfmethoden. Ziel ist die Gewährleistung der Sicherheit und Zuverlässigkeit der eingesetzten Bauteile. Aktive Thermografieverfahren ermöglichen die effiziente Prüfung großer Flächen mit hoher Auflösung in wenigen Arbeitsschritten. Ein wichtiges Teilgebiet der Prüfungen ist die Ortung und Charakterisierung von Delaminationen, die sowohl bereits in der Fertigung als auch während der Nutzung eines Bauteils auftreten können, und dessen strukturelle Integrität schwächen. ;In diesem Beitrag werden CFK-Strukturen mit künstlichen und natürlichen Delaminationen mit Hilfe unterschiedlich zeitlich modulierter Strahlungsquellen experimentell untersucht. Verwendet werden dabei Anregungen mit Blitzlampen und mit frequenzmodulierten Halogenlampen. Mittels Filterfunktionen im Zeit- und Frequenzbereich wird das Kontrast-zu-Rausch-Verhältnis (CNR) der detektierten Fehlstellen optimiert. Verglichen werden anschließend die Nachweisempfindlichkeit, das CNR und die Ortsauflösung der zu charakterisierenden Delaminationen für die unterschiedlichen Anregungs- und Auswertungstechniken. Ergänzt werden die Experimente durch numerische Simulationen des dreidimensionalen Wärmetransportes. Y1 - 2017 ER - TY - GEN A1 - Weiser, Martin A1 - Freytag, Yvonne A1 - Erdmann, Bodo A1 - Hubig, Michael A1 - Mall, Gita T1 - Optimal Design of Experiments for Estimating the Time of Death in Forensic Medicine N2 - Estimation of time of death based on a single measurement of body core temperature is a standard procedure in forensic medicine. Mechanistic models using simulation of heat transport promise higher accuracy than established phenomenological models in particular in nonstandard situations, but involve many not exactly known physical parameters. Identifying both time of death and physical parameters from multiple temperature measurements is one possibility to reduce the uncertainty significantly. In this paper, we consider the inverse problem in a Bayesian setting and perform both local and sampling-based uncertainty quantification, where proper orthogonal decomposition is used as model reduction for fast solution of the forward model. Based on the local uncertainty quantification, optimal design of experiments is performed in order to minimize the uncertainty in the time of death estimate for a given number of measurements. For reasons of practicability, temperature acquisition points are selected from a set of candidates in different spatial and temporal locations. Applied to a real corpse model, a significant accuracy improvement is obtained already with a small number of measurements. T3 - ZIB-Report - 18-08 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-67247 SN - 1438-0064 ER - TY - JOUR A1 - Weiser, Martin A1 - Erdmann, Bodo A1 - Schenkl, Sebastian A1 - Muggenthaler, Holger A1 - Hubig, Michael A1 - Mall, Gita A1 - Zachow, Stefan T1 - Uncertainty in Temperature-Based Determination of Time of Death JF - Heat and Mass Transfer N2 - Temperature-based estimation of time of death (ToD) can be per- formed either with the help of simple phenomenological models of corpse cooling or with detailed mechanistic (thermodynamic) heat transfer mod- els. The latter are much more complex, but allow a higher accuracy of ToD estimation as in principle all relevant cooling mechanisms can be taken into account. The potentially higher accuracy depends on the accuracy of tissue and environmental parameters as well as on the geometric resolution. We in- vestigate the impact of parameter variations and geometry representation on the estimated ToD based on a highly detailed 3D corpse model, that has been segmented and geometrically reconstructed from a computed to- mography (CT) data set, differentiating various organs and tissue types. Y1 - 2018 U6 - https://doi.org/10.1007/s00231-018-2324-4 VL - 54 IS - 9 SP - 2815 EP - 2826 PB - Springer ER - TY - GEN A1 - Götschel, Sebastian A1 - Weiser, Martin T1 - Lossy Compression for Large Scale PDE Problems N2 - Solvers for partial differential equations (PDE) are one of the cornerstones of computational science. For large problems, they involve huge amounts of data that needs to be stored and transmitted on all levels of the memory hierarchy. Often, bandwidth is the limiting factor due to relatively small arithmetic intensity, and increasingly so due to the growing disparity between computing power and bandwidth. Consequently, data compression techniques have been investigated and tailored towards the specific requirements of PDE solvers during the last decades. This paper surveys data compression challenges and corresponding solution approaches for PDE problems, covering all levels of the memory hierarchy from mass storage up to main memory. Exemplarily, we illustrate concepts at particular methods, and give references to alternatives. T3 - ZIB-Report - 19-32 KW - partial differential equation KW - data compression KW - floating point compression KW - lossy compression Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-73817 SN - 1438-0064 ER - TY - GEN A1 - Götschel, Sebastian A1 - Schiela, Anton A1 - Weiser, Martin T1 - Kaskade 7 -- a Flexible Finite Element Toolbox N2 - Kaskade 7 is a finite element toolbox for the solution of stationary or transient systems of partial differential equations, aimed at supporting application-oriented research in numerical analysis and scientific computing. The library is written in C++ and is based on the Dune interface. The code is independent of spatial dimension and works with different grid managers. An important feature is the mix-and-match approach to discretizing systems of PDEs with different ansatz and test spaces for all variables. We describe the mathematical concepts behind the library as well as its structure, illustrating its use at several examples on the way. T3 - ZIB-Report - 19-48 KW - finite elements KW - generic programming KW - partial differential equations Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-74616 SN - 1438-0064 ER - TY - JOUR A1 - Schneck, Jakob A1 - Weiser, Martin A1 - Wende, Florian T1 - Impact of mixed precision and storage layout on additive Schwarz smoothers JF - Numerical Linear Algebra with Applications N2 - The growing discrepancy between CPU computing power and memory bandwidth drives more and more numerical algorithms into a bandwidth-bound regime. One example is the overlapping Schwarz smoother, a highly effective building block for iterative multigrid solution of elliptic equations with higher order finite elements. Two options of reducing the required memory bandwidth are sparsity exploiting storage layouts and representing matrix entries with reduced precision in floating point or fixed point format. We investigate the impact of several options on storage demand and contraction rate, both analytically in the context of subspace correction methods and numerically at an example of solid mechanics. Both perspectives agree on the favourite scheme: fixed point representation of Cholesky factors in nested dissection storage. Y1 - 2021 U6 - https://doi.org/10.1002/nla.2366 VL - 28 IS - 4 ER - TY - GEN A1 - Schiela, Anton A1 - Weiser, Martin T1 - Superlinear Convergence of the Control Reduced Interior Point Method for PDE Constrained Optimization N2 - A thorough convergence analysis of the Control Reduced Interior Point Method in function space is performed. This recently proposed method is a primal interior point pathfollowing scheme with the special feature, that the control variable is eliminated from the optimality system. Apart from global linear convergence we show, that this method converges locally almost quadratically, if the optimal solution satisfies a function space analogue to a non-degeneracy condition. In numerical experiments we observe, that a prototype implementation of our method behaves in compliance with our theoretical results. T3 - ZIB-Report - 05-15 KW - interior point methods in function space KW - optimal control KW - superlinear convergence Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-8490 ER - TY - JOUR A1 - Schenk, O. A1 - Wächter, Andreas A1 - Weiser, Martin T1 - Inertia Revealing Preconditioning For Large-Scale Nonconvex Constrained Optimization JF - SIAM J. Sci. Comp. Y1 - 2008 VL - 31 IS - 2 SP - 939 EP - 960 ER - TY - BOOK A1 - Deuflhard, Peter A1 - Weiser, Martin T1 - Numerische Mathematik 3 Y1 - 2011 PB - de Gruyter, Berlin ER - TY - BOOK A1 - Deuflhard, Peter A1 - Weiser, Martin T1 - Adaptive numerical solution of PDEs Y1 - 2012 PB - de Gruyter CY - Berlin ER - TY - CHAP A1 - Weiser, Martin A1 - Scacchi, Simone T1 - Spectral Deferred Correction methods for adaptive electro-mechanical coupling in cardiac simulation T2 - G. Russo et al.(eds.) Progress in Industrial Mathematics at ECMI 2014 N2 - We investigate spectral deferred correction (SDC) methods for time stepping and their interplay with spatio-temporal adaptivity, applied to the solution of the cardiac electro-mechanical coupling model. This model consists of the Monodomain equations, a reaction-diffusion system modeling the cardiac bioelectrical activity, coupled with a quasi-static mechanical model describing the contraction and relaxation of the cardiac muscle. The numerical approximation of the cardiac electro-mechanical coupling is a challenging multiphysics problem, because it exhibits very different spatial and temporal scales. Therefore, spatio-temporal adaptivity is a promising approach to reduce the computational complexity. SDC methods are simple iterative methods for solving collocation systems. We exploit their flexibility for combining them in various ways with spatio-temporal adaptivity. The accuracy and computational complexity of the resulting methods are studied on some numerical examples. Y1 - 2017 U6 - https://doi.org/10.1007/978-3-319-23413-7_42 SP - 321 EP - 328 PB - Springer ER - TY - THES A1 - Götschel, Sebastian T1 - Adaptive Lossy Trajectory Compression for Optimal Control of Parabolic PDEs N2 - Optimal control problems governed by nonlinear, time-dependent PDEs on three-dimensional spatial domains are an important tool in many fields, ranging from engineering applications to medicine. For the solution of such optimization problems, methods working on the reduced objective functional are often employed to avoid a full spatio-temporal discretization of the problem. The evaluation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. The state enters into the adjoint equation, requiring the storage of a full 4D data set. If Newton-CG methods are used, two additional trajectories have to be stored. To get numerical results that are accurate enough, in many cases very fine discretizations in time and space are necessary, leading to a significant amount of data to be stored and transmitted to mass storage. This thesis deals with the development and analysis of methods for lossy compression of such finite element solutions. The algorithms are based on a change of basis to reduce correlations in the data, combined with quantization. This is achieved by transforming the finite element coefficient vector from the nodal to the hierarchical basis, followed by rounding the coefficients to a prescribed precision. Due to the inexact reconstruction, and thus inexact data for the adjoint equation, the error induced in the reduced gradient, and reduced Hessian, has to be controlled, to not impede convergence of the optimization. Accuracy requirements of different optimization methods are analyzed, and computable error estimates for the influence of lossy trajectory storage are derived. These tools are used to adaptively control the accuracy of the compressed data. The efficiency of the algorithms is demonstrated on several numerical examples, ranging from a simple linear, scalar equation to a semi-linear system of reaction-diffusion equations. In all examples considerable reductions in storage space and bandwidth requirements are achieved, without significantly influencing the convergence behavior of the optimization methods. Finally, to go beyond pointwise error control, the hierarchical basis transform can be replaced by more sophisticated wavelet transforms. Numerical experiments indicate that choosing suitable norms for error control allows higher compression factors. KW - optimal control KW - semi-linear parabolic PDEs KW - adjoint gradient computation KW - trajectory storage KW - lossy compression Y1 - 2015 UR - http://www.diss.fu-berlin.de/diss/receive/FUDISS_thesis_000000098552 ER - TY - CHAP A1 - Müller, Jan A1 - Götschel, Sebastian A1 - Maierhofer, Christiane A1 - Weiser, Martin T1 - Determining the material parameters for the reconstruction of defects in carbon fiber reinforced polymers from data measured by flash thermography T2 - AIP Conference Proceedings Y1 - 2017 U6 - https://doi.org/10.1063/1.4974671 VL - 1806 ER - TY - JOUR A1 - Fischer, Lisa A1 - Götschel, Sebastian A1 - Weiser, Martin T1 - Lossy data compression reduces communication time in hybrid time-parallel integrators JF - Comput. Vis. Sci. N2 - Parallel in time methods for solving initial value problems are a means to increase the parallelism of numerical simulations. Hybrid parareal schemes interleaving the parallel in time iteration with an iterative solution of the individual time steps are among the most efficient methods for general nonlinear problems. Despite the hiding of communication time behind computation, communication has in certain situations a significant impact on the total runtime. Here we present strict, yet no sharp, error bounds for hybrid parareal methods with inexact communication due to lossy data compression, and derive theoretical estimates of the impact of compression on parallel efficiency of the algorithms. These and some computational experiments suggest that compression is a viable method to make hybrid parareal schemes robust with respect to low bandwidth setups. Y1 - 2018 U6 - https://doi.org/10.1007/s00791-018-0293-2 VL - 19 IS - 1 SP - 19 EP - 30 ER - TY - GEN A1 - Weiser, Martin A1 - Scacchi, Simone T1 - Spectral Deferred Correction methods for adaptive electro-mechanical coupling in cardiac simulation N2 - We investigate spectral deferred correction (SDC) methods for time stepping and their interplay with spatio-temporal adaptivity, applied to the solution of the cardiac electro-mechanical coupling model. This model consists of the Monodomain equations, a reaction-diffusion system modeling the cardiac bioelectrical activity, coupled with a quasi-static mechanical model describing the contraction and relaxation of the cardiac muscle. The numerical approximation of the cardiac electro-mechanical coupling is a challenging multiphysics problem, because it exhibits very different spatial and temporal scales. Therefore, spatio-temporal adaptivity is a promising approach to reduce the computational complexity. SDC methods are simple iterative methods for solving collocation systems. We exploit their flexibility for combining them in various ways with spatio-temporal adaptivity. The accuracy and computational complexity of the resulting methods are studied on some numerical examples. T3 - ZIB-Report - 14-22 Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-50695 SN - 1438-0064 ER - TY - GEN A1 - Deuflhard, Peter A1 - Kornhuber, Ralf A1 - Sander, Oliver A1 - Schiela, Anton A1 - Weiser, Martin ED - Deuflhard, Peter ED - Grötschel, Martin ED - Hömberg, Dietmar ED - Horst, Ulrich ED - Kramer, Jürg ED - Mehrmann, Volker ED - Polthier, Konrad ED - Schmidt, Frank ED - Schütte, Christof ED - Skutella, Martin ED - Sprekels, Jürgen T1 - Mathematics cures virtual patients T2 - MATHEON-Mathematics for Key Technologies Y1 - 2014 VL - 1 SP - 7 EP - 25 PB - European Mathematical Society ER - TY - THES A1 - Schneck, Jakob T1 - Zielorientierte Fehlerschätzer für die Topologieoptimierung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-57303 ER - TY - JOUR A1 - Weiser, Martin T1 - On goal-oriented adaptivity for elliptic optimal control problems JF - Opt. Meth. Softw. N2 - The paper proposes goal-oriented error estimation and mesh refinement for optimal control problems with elliptic PDE constraints using the value of the reduced cost functional as quantity of interest. Error representation, hierarchical error estimators, and greedy-style error indicators are derived and compared to their counterparts when using the all-at-once cost functional as quantity of interest. Finally, the efficiency of the error estimator and generated meshes are demonstrated on numerical examples. Y1 - 2013 VL - 28 IS - 13 SP - 969 EP - 992 ER - TY - JOUR A1 - Deuflhard, Peter A1 - Schiela, Anton A1 - Weiser, Martin T1 - Mathematical Cancer Therapy Planning in Deep Regional Hyperthermia JF - Acta Numerica N2 - This paper surveys the required mathematics for a typical challenging problem from computational medicine, the cancer therapy planning in deep regional hyperthermia. In the course of many years of close cooperation with clinics, the medical problem gave rise to quite a number of subtle mathematical problems, part of which had been unsolved when the common project started. Efficiency of numerical algorithms, i.e. computational speed and monitored reliability, play a decisive role for the medical treatment. Off-the-shelf software had turned out to be not sufficient to meet the requirements of medicine. Rather, new mathematical theory as well as new numerical algorithms had to be developed. In order to make our algorithms useful in the clinical environment, new visualization software, a virtual lab, including 3D geometry processing of individual virtual patients had to be designed and implemented. Moreover, before the problems could be attacked by numerical algorithms, careful mathematical modelling had to be done. Finally, parameter identification and constrained optimization for the PDEs had to be newly analyzed and realized over the individual patient's geometry. Our new techniques had an impact on the specificity of the individual patients' treatment and on the construction of an improved hyperthermia applicator. Y1 - 2012 VL - 21 SP - 307 EP - 378 ER - TY - GEN A1 - Götschel, Sebastian A1 - Weiser, Martin A1 - Schiela, Anton ED - Dedner, A. ED - Flemisch, B. ED - Klöfkorn, R. T1 - Solving Optimal Control Problems with the Kaskade 7 Finite Element Toolbox T2 - Advances in DUNE N2 - This paper presents concepts and implementation of the finite element toolbox Kaskade 7, a flexible C++ code for solving elliptic and parabolic PDE systems. Issues such as problem formulation, assembly and adaptivity are discussed at the example of optimal control problems. Trajectory compression for parabolic optimization problems is considered as a case study. Y1 - 2012 SP - 101 EP - 112 PB - Springer ER - TY - JOUR A1 - Weiser, Martin A1 - Götschel, Sebastian T1 - State Trajectory Compression for Optimal Control with Parabolic PDEs JF - SIAM J. Sci. Comput. N2 - In optimal control problems with nonlinear time-dependent 3D PDEs, full 4D discretizations are usually prohibitive due to the storage requirement. For this reason gradient and quasi-Newton methods working on the reduced functional are often employed. The computation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. The state enters into the adjoint equation, again requiring the storage of a full 4D data set. We propose a lossy compression algorithm using an inexact but cheap predictor for the state data, with additional entropy coding of prediction errors. As the data is used inside a discretized, iterative algorithm, lossy coding maintaining an error bound is sufficient. Y1 - 2012 U6 - https://doi.org/10.1137/11082172X VL - 34 IS - 1 SP - A161 EP - A184 ER - TY - GEN A1 - Weiser, Martin T1 - Delayed Residual Compensation for Bidomain Equations T2 - AIP Conference Proceedings N2 - The biodomain model of cardioelectric excitation consists of a reaction‐diffusion equation, an elliptic algebraic constraint, and a set of pointwise ODEs. Fast reaction enforces small time steps, such that for common mesh sizes the reaction‐diffusion equation is easily solved implicitly due to a dominating mass matrix. In contrast, the elliptic constraint does not benefit from small time steps and requires a comparably expensive solution. We propose a delayed residual compensation that improves the solution of the elliptic constraint and thus alleviates the need for long iteration times. Y1 - 2010 U6 - https://doi.org/10.1063/1.3498495 VL - 1281 SP - 419 EP - 422 ER - TY - JOUR A1 - Lubkoll, Lars A1 - Schiela, Anton A1 - Weiser, Martin T1 - An optimal control problem in polyconvex hyperelasticity JF - SIAM J. Control Opt. N2 - We consider a shape implant design problem that arises in the context of facial surgery. We introduce a reformulation as an optimal control problem, where the control acts as a boundary force. The state is modelled as a minimizer of a polyconvex hyperelastic energy functional. We show existence of optimal solutions and derive - on a formal level - first order optimality conditions. Finally, preliminary numerical results are presented. Y1 - 2014 U6 - https://doi.org/10.1137/120876629 VL - 52 IS - 3 SP - 1403 EP - 1422 ER - TY - GEN A1 - Schiela, Anton A1 - Weiser, Martin ED - Diehl, M. ED - Glineur, F. ED - Jarlebring, E. ED - Michiels, W. T1 - Barrier methods for a control problem from hyperthermia treatment planning T2 - Recent Advances in Optimization and its Applications in Engineering (Proceedings of 14th Belgian-French-German Conference on Optimization 2009) N2 - We consider an optimal control problem from hyperthermia treatment planning and its barrier regularization. We derive basic results, which lay the groundwork for the computation of optimal solutions via an interior point path-following method. Further, we report on a numerical implementation of such a method and its performance at an example problem. Y1 - 2010 SP - 419 EP - 428 PB - Springer ER - TY - GEN A1 - Götschel, Sebastian A1 - Maierhofer, Christiane A1 - Müller, Jan P. A1 - Rothbart, Nick A1 - Weiser, Martin T1 - Quantitative Defect Reconstruction in Active Thermography for Fiber-Reinforced Composites N2 - Carbon-fiber reinforced composites are becoming more and more important in the production of light-weight structures, e.g., in the automotive and aerospace industry. Thermography is often used for non-destructive testing of these products, especially to detect delaminations between different layers of the composite. In this presentation, we aim at methods for defect reconstruction from thermographic measurements of such carbon-fiber reinforced composites. The reconstruction results shall not only allow to locate defects, but also give a quantitative characterization of the defect properties. We discuss the simulation of the measurement process using finite element methods, as well as the experimental validation on flat bottom holes. Especially in pulse thermography, thin boundary layers with steep temperature gradients occurring at the heated surface need to be resolved. Here we use the combination of a 1D analytical solution combined with numerical solution of the remaining defect equation. We use the simulations to identify material parameters from the measurements. Finally, fast heuristics for reconstructing defect geometries are applied to the acquired data, and compared for their accuracy and utility in detecting different defects like back surface defects or delaminations. T3 - ZIB-Report - 16-13 KW - thermography KW - inverse problems KW - parameter identification KW - geometry identification KW - nondestructive testing Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-58374 UR - https://www.wcndt2016.com/portals/wcndt/bb/Th4C4.pdf SN - 1438-0064 ER - TY - BOOK A1 - Weiser, Martin T1 - Inside Finite Elements N2 - All relevant implementation aspects of finite element methods are discussed in this book. The focus is on algorithms and data structures as well as on their concrete implementation. Theory is covered as far as it gives insight into the construction of algorithms.Throughout the exercises a complete FE-solver for scalar 2D problems will be implemented in Matlab/Octave. Y1 - 2016 PB - De Gruyter ER - TY - GEN A1 - Weiser, Martin T1 - Pointwise Nonlinear Scaling for Reaction-Diffusion-Equations N2 - Parabolic reaction-diffusion systems may develop sharp moving reaction fronts which pose a challenge even for adaptive finite element methods. We propose a method to transform the equation into an equivalent form that usually exhibits solutions which are easier to discretize, giving higher accuracy for a given number of degrees of freedom. The transformation is realized as an efficiently computable pointwise nonlinear scaling that is optimized for prototypical planar travelling wave solutions of the underlying reaction-diffusion equation. The gain in either performance or accuracy is demonstrated on different numerical examples. T3 - ZIB-Report - 07-45 KW - reaction-diffusion equations KW - travelling waves KW - nonlinear scaling KW - discretization error Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-10493 SN - 1438-0064 ER - TY - GEN A1 - Schenk, Olaf A1 - Wächter, Andreas A1 - Weiser, Martin T1 - Inertia Revealing Preconditioning For Large-Scale Nonconvex Constrained Optimization N2 - Fast nonlinear programming methods following the all-at-once approach usually employ Newton's method for solving linearized Karush-Kuhn-Tucker (KKT) systems. In nonconvex problems, the Newton direction is only guaranteed to be a descent direction if the Hessian of the Lagrange function is positive definite on the nullspace of the active constraints, otherwise some modifications to Newton's method are necessary. This condition can be verified using the signs of the KKT's eigenvalues (inertia), which are usually available from direct solvers for the arising linear saddle point problems. Iterative solvers are mandatory for very large-scale problems, but in general do not provide the inertia. Here we present a preconditioner based on a multilevel incomplete $LBL^T$ factorization, from which an approximation of the inertia can be obtained. The suitability of the heuristics for application in optimization methods is verified on an interior point method applied to the CUTE and COPS test problems, on large-scale 3D PDE-constrained optimal control problems, as well as 3D PDE-constrained optimization in biomedical cancer hyperthermia treatment planning. The efficiency of the preconditioner is demonstrated on convex and nonconvex problems with $150^3$ state variables and $150^2$ control variables, both subject to bound constraints. T3 - ZIB-Report - 07-32 KW - nonconvex constrained optimization KW - interior-point method KW - inertia KW - multilevel incomplete factorization Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-10314 SN - 1438-0064 ER - TY - JOUR A1 - Göbel, Fritz A1 - Huynh, Ngoc Mai Monica A1 - Chegini, Fatemeh A1 - Pavarino, Luca A1 - Weiser, Martin A1 - Scacchi, Simone A1 - Anzt, Hartwig T1 - A BDDC Preconditioner for the Cardiac EMI Model in three Dimensions JF - SIAM J. Sci. Comput. N2 - We analyze a Balancing Domain Decomposition by Constraints (BDDC) preconditioner for the solution of three dimensional composite Discontinuous Galerkin discretizations of reaction-diffusion systems of ordinary and partial differential equations arising in cardiac cell-by-cell models like the Extracellular space, Membrane and Intracellular space (EMI) Model. These microscopic models are essential for the understanding of events in aging and structurally diseased hearts which macroscopic models relying on homogenized descriptions of the cardiac tissue, like Monodomain and Bidomain models, fail to adequately represent. The modeling of each individual cardiac cell results in discontinuous global solutions across cell boundaries, requiring the careful construction of dual and primal spaces for the BDDC preconditioner. We provide a scalable condition number bound for the precondition operator and validate the theoretical results with extensive numerical experiments. Y1 - 2025 ER - TY - JOUR A1 - Semler, Phillip A1 - Weiser, Martin T1 - Adaptive Gaussian Process Regression for Efficient Building of Surrogate Models in Inverse Problems JF - Inverse Problems N2 - In a task where many similar inverse problems must be solved, evaluating costly simulations is impractical. Therefore, replacing the model y with a surrogate model y(s) that can be evaluated quickly leads to a significant speedup. The approximation quality of the surrogate model depends strongly on the number, position, and accuracy of the sample points. With an additional finite computational budget, this leads to a problem of (computer) experimental design. In contrast to the selection of sample points, the trade-off between accuracy and effort has hardly been studied systematically. We therefore propose an adaptive algorithm to find an optimal design in terms of position and accuracy. Pursuing a sequential design by incrementally appending the computational budget leads to a convex and constrained optimization problem. As a surrogate, we construct a Gaussian process regression model. We measure the global approximation error in terms of its impact on the accuracy of the identified parameter and aim for a uniform absolute tolerance, assuming that y(s) is computed by finite element calculations. A priori error estimates and a coarse estimate of computational effort relate the expected improvement of the surrogate model error to computational effort, resulting in the most efficient combination of sample point and evaluation tolerance. We also allow for improving the accuracy of already existing sample points by continuing previously truncated finite element solution procedures. Y1 - 2023 U6 - https://doi.org/10.1088/1361-6420/ad0028 VL - 39 IS - 12 SP - 125003 ER - TY - CHAP A1 - Chegini, Fatemeh A1 - Steinke, Thomas A1 - Weiser, Martin T1 - Efficient adaptivity for simulating cardiac electrophysiology with spectral deferred correction methods N2 - The locality of solution features in cardiac electrophysiology simulations calls for adaptive methods. Due to the overhead incurred by established mesh refinement and coarsening, however, such approaches failed in accelerating the computations. Here we investigate a different route to spatial adaptivity that is based on nested subset selection for algebraic degrees of freedom in spectral deferred correction methods. This combination of algebraic adaptivity and iterative solvers for higher order collocation time stepping realizes a multirate integration with minimal overhead. This leads to moderate but significant speedups in both monodomain and cell-by-cell models of cardiac excitation, as demonstrated at four numerical examples. Y1 - 2022 ER - TY - BOOK A1 - Deuflhard, Peter A1 - Weiser, Martin T1 - Numerische Mathematik 3. Adaptive Lösung partieller Differentialgleichungen Y1 - 2020 SN - 978-3-11-069168-9 U6 - https://doi.org/10.1515/9783110689655 PB - de Gruyter ET - 2 ER - TY - JOUR A1 - Schiela, Anton A1 - Stöcklein, Matthias A1 - Weiser, Martin T1 - A primal dual projection algorithm for efficient constraint preconditioning JF - SIAM Journal on Scientific Computing N2 - We consider a linear iterative solver for large scale linearly constrained quadratic minimization problems that arise, for example, in optimization with PDEs. By a primal-dual projection (PDP) iteration, which can be interpreted and analysed as a gradient method on a quotient space, the given problem can be solved by computing sulutions for a sequence of constrained surrogate problems, projections onto the feasible subspaces, and Lagrange multiplier updates. As a major application we consider a class of optimization problems with PDEs, where PDP can be applied together with a projected cg method using a block triangular constraint preconditioner. Numerical experiments show reliable and competitive performance for an optimal control problem in elasticity. Y1 - 2021 U6 - https://doi.org/10.1137/20M1380739 VL - 43 IS - 6 SP - A4095 EP - A4120 ER - TY - CHAP A1 - Steyer, Joshua A1 - Chegini, Fatemeh A1 - Potse, Mark A1 - Loewe, Axel A1 - Weiser, Martin T1 - Continuity of Microscopic Cardiac Conduction in a Computational Cell-by-Cell Model T2 - 2023 Computing in Cardiology Conference (CinC) N2 - Conduction velocity in cardiac tissue is a crucial electrophysiological parameter for arrhythmia vulnerability. Pathologically reduced conduction velocity facilitates arrhythmogenesis because such conduction velocities decrease the wavelength with which re-entry may occur. Computational studies on CV and how it changes regionally in models at spatial scales multiple times larger than actual cardiac cells exist. However, microscopic conduction within cells and between them have been studied less in simulations. In this work, we study the relation of microscopic conduction patterns and clinically observable macroscopic conduction using an extracellular-membrane-intracellular model which represents cardiac tissue with these subdomains at subcellular resolution. By considering cell arrangement and non-uniform gap junction distribution, it yields anisotropic excitation propagation. This novel kind of model can for example be used to understand how discontinuous conduction on the microscopic level affects fractionation of electrograms in healthy and fibrotic tissue. Along the membrane of a cell, we observed a continuously propagating activation wavefront. When transitioning from one cell to the neighbouring one, jumps in local activation times occurred, which led to lower global conduction velocities than locally within each cell. Y1 - 2023 U6 - https://doi.org/10.22489/CinC.2023.385 SN - 2325-887X VL - 50 PB - Computing in Cardiology ER -