TY - THES A1 - Herter, Felix T1 - Supervised Classification of Microtubule Ends: An Evaluation of Machine Learning Approaches N2 - Aim of this thesis was to evaluate the performance of three popular machine learning methods – decision trees, support vector machines, and neural networks – on a supervised image classification task from the domain of cell biology. Specifically, the task was to classify microtubule ends in electron tomography images as open or closed. Microtubules are filamentous macromolecules of the cytoskeleton. Distribution of their end types is of interest to cell biologists as it allows to analyze microtubule nucleation sites. Currently classification is done manually by domain experts, which is a difficult task due to the low signal-to-noise ratio and the abundance of microtubules in a single cell. Automating this tedious and error prone task would be beneficial to both efficiency and consistency. Images of microtubule ends were obtained from electron tomography reconstructions of mitotic spindles. As ground truth data for training and testing four independent expert classifications for the same samples from different tomograms were used. Image information around microtubule ends was extracted in various formats for further processing. For all classifiers we considered how the performance varies when different preprocessing techniques (per-feature and per-image standardization) are applied. or decision trees and support vector machines we also evaluated the effect of training on a) imbalanced versus under- and over-sampled data and b) image-based vs feature-based input for specifically designed features. The results show that for decision trees and support vector machines classification on features outperforms classification on images. Both methods give most equalized per-class accuracies when the training data was undersampled and when preprocessed with per-image standardization prior to features extraction. Neural networks gave the best results when no preprocessing was applied. The final decision tree, support vector machine, and neural network obtained accuracies on the test set for (open,closed ) samples of (62%, 72%), (66%, 70%), and (61%, 78%) respectively, when considering all samples where at least one expert assigned a label. Restricting the test set to samples with at least three agreeing expert labels raised these to (78%, 84%), (74%, 92%), and (82%, 88%). It can be observed that many samples misclassified by the algorithms were also difficult to classify for the experts. Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-68395 ER - TY - GEN A1 - Redemann, Stefanie A1 - Lantzsch, Ina A1 - Lindow, Norbert A1 - Prohaska, Steffen A1 - Srayko, Martin A1 - Müller-Reichert, Thomas T1 - A switch in microtubule orientation during C. elegans meiosis N2 - In oocytes of many organisms, meiotic spindles form in the absence of centrosomes [1–5]. Such female meiotic spindles have a pointed appearance in metaphase with microtubules focused at acentrosomal spindle poles. At anaphase, the microtubules of acentrosomal spindles then transition to an inter- chromosomal array, while the spindle poles disappear. This transition is currently not understood. Previous studies have focused on this inter- chromosomal microtubule array and proposed a pushing model to drive chromosome segregation [6, 7]. This model includes an end-on orientation of microtubules with chromosomes. Alternatively, chromosomes were thought to associate along bundles of microtubules [8, 9]. Starting with metaphase, this second model proposed a pure lateral chromosome-to-microtubule association up to the final meiotic stages of anaphase. Here we applied large-scale electron tomography [10] of staged C. elegans oocytes in meiosis to analyze the orientation of microtubules in respect to chromosomes. We show that microtubules at metaphase I are primarily oriented laterally to the chromosomes and that microtubules switch to an end-on orientation during progression through anaphase. We further show that this switch in microtubule orientation involves a kinesin-13 microtubule depolymerase, KLP-7, which removes laterally associated microtubules around chromosomes. From this we conclude that both lateral and end-on modes of microtubule-to-chromosome orientations are successively used in C. elegans oocytes to segregate meiotic chromosomes. T3 - ZIB-Report - 18-34 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-69855 SN - 1438-0064 ER - TY - JOUR A1 - Redemann, Stefanie A1 - Lantzsch, Ina A1 - Lindow, Norbert A1 - Prohaska, Steffen A1 - Srayko, Martin A1 - Müller-Reichert, Thomas T1 - A switch in microtubule orientation during C. elegans meiosis JF - Current Biology N2 - In oocytes of many organisms, meiotic spindles form in the absence of centrosomes [1–5]. Such female meiotic spindles have a pointed appearance in metaphase with microtubules focused at acentrosomal spindle poles. At anaphase, the microtubules of acentrosomal spindles then transition to an inter- chromosomal array, while the spindle poles disappear. This transition is currently not understood. Previous studies have focused on this inter- chromosomal microtubule array and proposed a pushing model to drive chromosome segregation [6, 7]. This model includes an end-on orientation of microtubules with chromosomes. Alternatively, chromosomes were thought to associate along bundles of microtubules [8, 9]. Starting with metaphase, this second model proposed a pure lateral chromosome-to-microtubule association up to the final meiotic stages of anaphase. Here we applied large-scale electron tomography [10] of staged C. elegans oocytes in meiosis to analyze the orientation of microtubules in respect to chromosomes. We show that microtubules at metaphase I are primarily oriented laterally to the chromosomes and that microtubules switch to an end-on orientation during progression through anaphase. We further show that this switch in microtubule orientation involves a kinesin-13 microtubule depolymerase, KLP-7, which removes laterally associated microtubules around chromosomes. From this we conclude that both lateral and end-on modes of microtubule-to-chromosome orientations are successively used in C. elegans oocytes to segregate meiotic chromosomes. Y1 - 2018 U6 - https://doi.org/10.1016/j.cub.2018.07.012 SN - 0960-9822 ER - TY - CHAP A1 - Lindow, Norbert A1 - Redemann, Stefanie A1 - Brünig, Florian A1 - Fabig, Gunar A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen T1 - Quantification of three-dimensional spindle architecture T2 - Methods in Cell Biology Part B N2 - Mitotic and meiotic spindles are microtubule-based structures to faithfully segregate chromosomes. Electron tomography is currently the method of choice to analyze the three-dimensional (3D) architecture of both types of spindles. Over the years, we have developed methods and software for automatic segmentation and stitching of microtubules in serial sections for large-scale reconstructions. 3D reconstruction of microtubules, however, is only the first step toward biological insight. The second step is the analysis of the structural data to derive measurable spindle properties. Here, we present a comprehensive set of techniques to quantify spindle parameters. These techniques provide quantitative analyses of specific microtubule classes and are applicable to a variety of tomographic reconstructions of spindles from different organisms. Y1 - 2018 U6 - https://doi.org/10.1016/bs.mcb.2018.03.012 SN - 0091-679X VL - 145 SP - 45 EP - 64 PB - Academic Press ER - TY - JOUR A1 - Fabig, Gunar A1 - Kiewisz, Robert A1 - Lindow, Norbert A1 - Powers, James A. A1 - Cota, Vanessa A1 - Quintanilla, Luis J. A1 - Brugués, Jan A1 - Prohaska, Steffen A1 - Chu, Diana S. A1 - Müller-Reichert, Thomas T1 - Sperm-specific meiotic chromosome segregation in C. elegans JF - eLife Y1 - 2020 U6 - https://doi.org/10.7554/eLife.50988 VL - 9 SP - e50988 ER - TY - JOUR A1 - Lindow, Norbert A1 - Brünig, Florian A1 - Dercksen, Vincent J. A1 - Fabig, Gunar A1 - Kiewisz, Robert A1 - Redemann, Stefanie A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen A1 - Baum, Daniel T1 - Semi-automatic stitching of filamentous structures in image stacks from serial-section electron tomography JF - bioRxiv N2 - We present a software-assisted workflow for the alignment and matching of filamentous structures across a 3D stack of serial images. This is achieved by combining automatic methods, visual validation, and interactive correction. After an initial alignment, the user can continuously improve the result by interactively correcting landmarks or matches of filaments. Supported by a visual quality assessment of regions that have been already inspected, this allows a trade-off between quality and manual labor. The software tool was developed to investigate cell division by quantitative 3D analysis of microtubules (MTs) in both mitotic and meiotic spindles. For this, each spindle is cut into a series of semi-thick physical sections, of which electron tomograms are acquired. The serial tomograms are then stitched and non-rigidly aligned to allow tracing and connecting of MTs across tomogram boundaries. In practice, automatic stitching alone provides only an incomplete solution, because large physical distortions and a low signal-to-noise ratio often cause experimental difficulties. To derive 3D models of spindles despite the problems related to sample preparation and subsequent data collection, semi-automatic validation and correction is required to remove stitching mistakes. However, due to the large number of MTs in spindles (up to 30k) and their resulting dense spatial arrangement, a naive inspection of each MT is too time consuming. Furthermore, an interactive visualization of the full image stack is hampered by the size of the data (up to 100 GB). Here, we present a specialized, interactive, semi-automatic solution that considers all requirements for large-scale stitching of filamentous structures in serial-section image stacks. The key to our solution is a careful design of the visualization and interaction tools for each processing step to guarantee real-time response, and an optimized workflow that efficiently guides the user through datasets. Y1 - 2020 U6 - https://doi.org/10.1101/2020.05.28.120899 ER - TY - GEN A1 - Lindow, Norbert A1 - Redemann, Stefanie A1 - Fabig, Gunar A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen T1 - Quantification of Three-Dimensional Spindle Architecture N2 - Mitotic and meiotic spindles are microtubule-based structures to faithfully segregate chromosomes. Electron tomography is currently the method of choice to analyze the three-dimensional architecture of both types of spindles. Over the years, we have developed methods and software for automatic segmentation and stitching of microtubules in serial sections for large-scale reconstructions. Three-dimensional reconstruction of microtubules, however, is only the first step towards biological insight. The second step is the analysis of the structural data to derive measurable spindle properties. Here, we present a comprehensive set of techniques to quantify spindle parameters. These techniques provide quantitative analyses of specific microtubule classes and are applicable to a variety of tomographic reconstructions of spindles from different organisms. T3 - ZIB-Report - 18-07 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-66562 SN - 1438-0064 ER - TY - GEN A1 - Lindow, Norbert A1 - Brünig, Florian A1 - Dercksen, Vincent J. A1 - Fabig, Gunar A1 - Kiewisz, Robert A1 - Redemann, Stefanie A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen T1 - Semi-automatic Stitching of Serial Section Image Stacks with Filamentous Structures N2 - In this paper, we present a software-assisted workflow for the alignment and matching of filamentous structures across a stack of 3D serial image sections. This is achieved by a combination of automatic methods, visual validation, and interactive correction. After an initial alignment, the user can continuously improve the result by interactively correcting landmarks or matches of filaments. This is supported by a quality assessment that visualizes regions that have been already inspected and, thus, allows a trade-off between quality and manual labor. The software tool was developed in collaboration with biologists who investigate microtubule-based spindles during cell division. To quantitatively understand the structural organization of such spindles, a 3D reconstruction of the numerous microtubules is essential. Each spindle is cut into a series of semi-thick physical sections, of which electron tomograms are acquired. The sections then need to be stitched, i.e. non-rigidly aligned; and the microtubules need to be traced in each section and connected across section boundaries. Experiments led to the conclusion that automatic methods for stitching alone provide only an incomplete solution to practical analysis needs. Automatic methods may fail due to large physical distortions, a low signal-to-noise ratio of the images, or other unexpected experimental difficulties. In such situations, semi-automatic validation and correction is required to rescue as much information as possible to derive biologically meaningful results despite of some errors related to data collection. Since the correct stitching is visually not obvious due to the number of microtubules (up to 30k) and their dense spatial arrangement, these are difficult tasks. Furthermore, a naive inspection of each microtubule is too time consuming. In addition, interactive visualization is hampered by the size of the image data (up to 100 GB). Based on the requirements of our collaborators, we present a practical solution for the semi-automatic stitching of serial section image stacks with filamentous structures. T3 - ZIB-Report - 19-30 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-73739 SN - 1438-0064 ER - TY - JOUR A1 - Weber, Britta A1 - Greenan, Garrett A1 - Prohaska, Steffen A1 - Baum, Daniel A1 - Hege, Hans-Christian A1 - Müller-Reichert, Thomas A1 - Hyman, Anthony A1 - Verbavatz, Jean-Marc T1 - Automated tracing of microtubules in electron tomograms of plastic embedded samples of Caenorhabditis elegans embryos JF - Journal of Structural Biology Y1 - 2012 UR - http://www.sciencedirect.com/science/article/pii/S1047847711003509 U6 - https://doi.org/10.1016/j.jsb.2011.12.004 VL - 178 IS - 2 SP - 129 EP - 138 ER - TY - CHAP A1 - Weber, Britta A1 - Möller, Marit A1 - Verbavatz, Jean-Marc A1 - Baum, Daniel A1 - Hege, Hans-Christian A1 - Prohaska, Steffen T1 - Fast Tracing of Microtubule Centerlines in Electron Tomograms T2 - BioVis 2011 Abstracts, 1st IEEE Symposium on Biological Data Visualization Y1 - 2011 ER - TY - JOUR A1 - Weber, Britta A1 - Tranfield, Erin M. A1 - Höög, Johanna L. A1 - Baum, Daniel A1 - Antony, Claude A1 - Hyman, Tony A1 - Verbavatz, Jean-Marc A1 - Prohaska, Steffen T1 - Automated stitching of microtubule centerlines across serial electron tomograms JF - PLoS ONE Y1 - 2014 U6 - https://doi.org/10.1371/journal.pone.0113222 SP - e113222 ER - TY - GEN A1 - Redemann, Stefanie A1 - Weber, Britta A1 - Möller, Marit A1 - Verbavatz, Jean-Marc A1 - Hyman, Anthony A1 - Baum, Daniel A1 - Prohaska, Steffen A1 - Müller-Reichert, Thomas T1 - The Segmentation of Microtubules in Electron Tomograms Using Amira T2 - Mitosis: Methods and Protocols Y1 - 2014 U6 - https://doi.org/10.1007/978-1-4939-0329-0_12 SP - 261 EP - 278 PB - Springer ER - TY - GEN A1 - Weber, Britta A1 - Tranfield, Erin M. A1 - Höög, Johanna L. A1 - Baum, Daniel A1 - Antony, Claude A1 - Hyman, Tony A1 - Verbavatz, Jean-Marc A1 - Prohaska, Steffen T1 - Automated stitching of microtubule centerlines across serial electron tomograms N2 - Tracing microtubule centerlines in serial section electron tomography requires microtubules to be stitched across sections, that is lines from different sections need to be aligned, endpoints need to be matched at section boundaries to establish a correspondence between neighboring sections, and corresponding lines need to be connected across multiple sections. We present computational methods for these tasks: 1) An initial alignment is computed using a distance compatibility graph. 2) A fine alignment is then computed with a probabilistic variant of the iterative closest points algorithm, which we extended to handle the orientation of lines by introducing a periodic random variable to the probabilistic formulation. 3) Endpoint correspondence is established by formulating a matching problem in terms of a Markov random field and computing the best matching with belief propagation. Belief propagation is not generally guaranteed to converge to a minimum. We show how convergence can be achieved, nonetheless, with minimal manual input. In addition to stitching microtubule centerlines, the correspondence is also applied to transform and merge the electron tomograms. We applied the proposed methods to samples from the mitotic spindle in C. elegans, the meiotic spindle in X. laevis, and sub-pellicular microtubule arrays in T. brucei. The methods were able to stitch microtubules across section boundaries in good agreement with experts’ opinions for the spindle samples. Results, however, were not satisfactory for the microtubule arrays. For certain experiments, such as an analysis of the spindle, the proposed methods can replace manual expert tracing and thus enable the analysis of microtubules over long distances with reasonable manual effort. T3 - ZIB-Report - 14-41 KW - electron tomography KW - microtubules KW - serial sectioning KW - image analysis KW - geometry reconstruction KW - image and geometry alignment KW - point correspondence Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-52958 SN - 1438-0064 ER - TY - JOUR A1 - Redemann, Stefanie A1 - Baumgart, Johannes A1 - Lindow, Norbert A1 - Shelley, Michael A1 - Nazockdast, Ehssan A1 - Kratz, Andrea A1 - Prohaska, Steffen A1 - Brugués, Jan A1 - Fürthauer, Sebastian A1 - Müller-Reichert, Thomas T1 - C. elegans chromosomes connect to centrosomes by anchoring into the spindle network JF - Nature Communications N2 - The mitotic spindle ensures the faithful segregation of chromosomes. Here we combine the first large-scale serial electron tomography of whole mitotic spindles in early C. elegans embryos with live-cell imaging to reconstruct all microtubules in 3D and identify their plus- and minus-ends. We classify them as kinetochore (KMTs), spindle (SMTs) or astral microtubules (AMTs) according to their positions, and quantify distinct properties of each class. While our light microscopy and mutant studies show that microtubules are nucleated from the centrosomes, we find only a few KMTs directly connected to the centrosomes. Indeed, by quantitatively analysing several models of microtubule growth, we conclude that minus-ends of KMTs have selectively detached and depolymerized from the centrosome. In toto, our results show that the connection between centrosomes and chromosomes is mediated by an anchoring into the entire spindle network and that any direct connections through KMTs are few and likely very transient. Y1 - 2017 U6 - https://doi.org/10.1038/ncomms15288 VL - 8 IS - 15288 ER - TY - THES A1 - Weber, Britta T1 - Reconstruction of Microtubule Centerlines from Electron Tomograms N2 - The organization of the mitotic spindle, a structure that separates the chromosomes during cell division, is an active research topic in molecular cell biology. It is composed of microtubules, elongated tubular macromolecules with a diameter of 25 nm. The only volumetric imaging technique that is available to a wide community and provides the required resolution to capture details about microtubules is electron tomography. However, the automatic detection of microtubules in electron tomograms is a difficult task due to the low contrast of the data. Furthermore, thick samples have to be cut into 300 nm thin sections before electron tomography can be applied. Software for automatically segmentation and stitching of the microtubules are not available and therefore these tasks have to be performed manually. Unfortunately, manual segmentation is time consuming for large samples and manual stitching of the tomograms is often infeasible due to the lack of prominent features for registration. Conclusions drawn from electron tomographic data is currently mostly based on either small samples containing few microtubules or single sections of complex structures. Consequently, simple properties, such as the length of microtubules in the spindle or their number, are still unknown for most model organisms. In this thesis, we present methods for 1) an automatic segmentation of microtubule centerlines in electron tomograms, and 2) an automatic stitching of the lines extracted from serial sections. For the centerline segmentation, we use 3D template matching and exploit knowledge about shape of microtubules and microscopy artifacts to design the templates. For the registration of the lines, we present a way to model the orientation of lines as a mixture of Fisher-Mises distributions where we estimate transformation parameters with the expectation maximization algorithm. The final line matching problem is formulated in terms of a probabilistic graphical model. To find the correct correspondences of line ends, we use belief propagation. We handle the poor convergence properties of this algorithm by detecting ambiguous and conflicting assignments of lines automatically. An expert can then influence the final output of the algorithm by solving conflicts manually. A detailed error analysis on true biological data and assessment of the reliability of the results is the prerequisite for analyzing the resulting line representations of the microtubules. To this end, the developed workflow for segmenting and stitching of microtubule centerlines is evaluated on plasticembedded samples of C. elegans early embryos and of spindles from X. laevis egg extracts. Our results suggest that the output of the presented algorithms together with little manual correction is of sufficient quality to allow a detailed analysis of dense microtubule networks. Finally, we exemplarily show results for the centrosome of a C. elegans mitotic spindle. KW - microtubules KW - electron tomography KW - c.elegans KW - image processing KW - graphical model KW - gaussian mixture model KW - template matching Y1 - 2015 UR - http://www.diss.fu-berlin.de/diss/receive/FUDISS_thesis_000000100915 ER - TY - JOUR A1 - Lindow, Norbert A1 - Brünig, Florian A1 - Dercksen, Vincent J. A1 - Fabig, Gunar A1 - Kiewisz, Robert A1 - Redemann, Stefanie A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen A1 - Baum, Daniel T1 - Semi-automatic stitching of filamentous structures in image stacks from serial-section electron tomography JF - Journal of Microscopy N2 - We present a software-assisted workflow for the alignment and matching of filamentous structures across a three-dimensional (3D) stack of serial images. This is achieved by combining automatic methods, visual validation, and interactive correction. After the computation of an initial automatic matching, the user can continuously improve the result by interactively correcting landmarks or matches of filaments. Supported by a visual quality assessment of regions that have been already inspected, this allows a trade-off between quality and manual labor. The software tool was developed in an interdisciplinary collaboration between computer scientists and cell biologists to investigate cell division by quantitative 3D analysis of microtubules (MTs) in both mitotic and meiotic spindles. For this, each spindle is cut into a series of semi-thick physical sections, of which electron tomograms are acquired. The serial tomograms are then stitched and non-rigidly aligned to allow tracing and connecting of MTs across tomogram boundaries. In practice, automatic stitching alone provides only an incomplete solution, because large physical distortions and a low signal-to-noise ratio often cause experimental difficulties. To derive 3D models of spindles despite dealing with imperfect data related to sample preparation and subsequent data collection, semi-automatic validation and correction is required to remove stitching mistakes. However, due to the large number of MTs in spindles (up to 30k) and their resulting dense spatial arrangement, a naive inspection of each MT is too time-consuming. Furthermore, an interactive visualization of the full image stack is hampered by the size of the data (up to 100 GB). Here, we present a specialized, interactive, semi-automatic solution that considers all requirements for large-scale stitching of filamentous structures in serial-section image stacks. To the best of our knowledge, it is the only currently available tool which is able to process data of the type and size presented here. The key to our solution is a careful design of the visualization and interaction tools for each processing step to guarantee real-time response, and an optimized workflow that efficiently guides the user through datasets. The final solution presented here is the result of an iterative process with tight feedback loops between the involved computer scientists and cell biologists. Y1 - 2021 U6 - https://doi.org/10.1111/jmi.13039 VL - 284 IS - 1 SP - 25 EP - 44 ER - TY - JOUR A1 - Kiewisz, Robert A1 - Baum, Daniel A1 - Müller-Reichert, Thomas A1 - Fabig, Gunar T1 - Serial-section electron tomography and quantitative analysis of the microtubule organization in 3D-reconstructed mitotic spindles JF - Bio-protocol Y1 - 2023 U6 - https://doi.org/10.21769/BioProtoc.4849 VL - 13 IS - 20 ER - TY - JOUR A1 - Okafornta, Chukwuebuka William A1 - Farhadifar, Reza A1 - Fabig, Gunar A1 - Wu, Hai-Yin A1 - Köckert, Maria A1 - Vogel, Martin A1 - Baum, Daniel A1 - Haase, Robert A1 - Shelley, Michael J. A1 - Needleman, Daniel J. A1 - Müller-Reichert, Thomas T1 - Cell size reduction scales spindle elongation but not chromosome segregation in C. elegans JF - bioRxiv N2 - How embryos adapt their internal cellular machinery to reductions in cell size during development remains a fundamental question in cell biology. Here, we use high-resolution lattice light-sheet fluorescence microscopy and automated image analysis to quantify lineage-resolved mitotic spindle and chromosome segregation dynamics from the 2– to 64–cell stages in Caenorhabditis elegans embryos. While spindle length scales with cell size across both wild-type and size-perturbed embryos, chromosome segregation dynamics remain largely invariant, suggesting that distinct mechanisms govern these mitotic processes. Combining femtosecond laser ablation with large-scale electron tomography, we find that central spindle microtubules mediate chromosome segregation dynamics and remain uncoupled from cell size across all stages of early development. In contrast, spindle elongation is driven by cortically anchored motor proteins and astral microtubules, rendering it sensitive to cell size. Incorporating these experimental results into an extended stoichiometric model for both the spindle and chromosomes, we find that allowing only cell size and microtubule catastrophe rates to vary reproduces elongation dynamics across development. The same model also accounts for centrosome separation and pronuclear positioning in the one-cell C. elegans embryo, spindle-length scaling across nematode species spanning ~100 million years of divergence, and spindle rotation in human cells. Thus, a unified stoichiometric framework provides a predictive, mechanistic account of spindle and nuclear dynamics across scales and species. Y1 - 2025 U6 - https://doi.org/10.1101/2025.10.13.681585 ER - TY - JOUR A1 - Lantzsch, Ina A1 - Yu, Che-Hang A1 - Chen, Yu-Zen A1 - Zimyanin, Vitaly A1 - Yazdkhasti, Hossein A1 - Lindow, Norbert A1 - Szentgyoergyi, Erik A1 - Pani, Ariel M A1 - Prohaska, Steffen A1 - Srayko, Martin A1 - Fürthauer, Sebastian A1 - Redemann, Stefanie T1 - Microtubule reorganization during female meiosis in C. elegans JF - eLife N2 - Most female meiotic spindles undergo striking morphological changes while transitioning from metaphase to anaphase. The ultra-structure of meiotic spindles, and how changes to this structure correlate with such dramatic spindle rearrangements remains largely unknown. To address this, we applied light microscopy, large-scale electron tomography and mathematical modeling of female meiotic \textit{Caenorhabditis elegans} spindles. Combining these approaches, we find that meiotic spindles are dynamic arrays of short microtubules that turn over within seconds. The results show that the metaphase to anaphase transition correlates with an increase in microtubule numbers and a decrease in their average length. Detailed analysis of the tomographic data revealed that the microtubule length changes significantly during the metaphase-to-anaphase transition. This effect is most pronounced for microtubules located within 150 nm of the chromosome surface. To understand the mechanisms that drive this transition, we developed a mathematical model for the microtubule length distribution that considers microtubule growth, catastrophe, and severing. Using Bayesian inference to compare model predictions and data, we find that microtubule turn-over is the major driver of the spindle reorganizations. Our data suggest that in metaphase only a minor fraction of microtubules, those closest to the chromosomes, are severed. The large majority of microtubules, which are not in close contact with chromosomes, do not undergo severing. Instead, their length distribution is fully explained by growth and catastrophe. This suggests that the most prominent drivers of spindle rearrangements are changes in nucleation and catastrophe rate. In addition, we provide evidence that microtubule severing is dependent on katanin. Y1 - 2021 U6 - https://doi.org/10.7554/eLife.58903 VL - 10 SP - e58903 ER - TY - JOUR A1 - Laguillo-Diego, Alejandra A1 - Kiewisz, Robert A1 - Martí-Gómez, Carlos A1 - Baum, Daniel A1 - Müller-Reichert, Thomas A1 - Vernos, Isabelle T1 - MCRS1 modulates the heterogeneity of microtubule minus-end morphologies in mitotic spindles JF - Molecular Biology of the Cell N2 - Faithful chromosome segregation requires the assembly of a bipolar spindle, consisting of two antiparallel microtubule (MT) arrays having most of their minus ends focused at the spindle poles and their plus ends overlapping in the spindle midzone. Spindle assembly, chromosome alignment and segregation require highly dynamic MTs. The plus ends of MTs have been extensively investigated; instead, their minus end structure remains poorly characterized. Here, we used large-scale electron tomography to study the morphology of the MT minus ends in 3D-reconstructed metaphase spindles in HeLa cells. In contrast to the homogeneous open morphology of the MT plus ends at the kinetochores, we found that MT minus ends are heterogeneous showing either open or closed morphologies. Silencing the minus-end specific stabilizer, MCRS1 increased the proportion of open MT minus ends. Altogether, these data suggest a correlation between the morphology and the dynamic state of the MT ends. Taking this heterogeneity of the MT minus end morphologies into account, our work indicates an unsynchronized behavior of MTs at the spindle poles, thus laying the ground for further studies on the complexity of MT dynamics regulation. Y1 - 2022 U6 - https://doi.org/10.1091/mbc.E22-08-0306-T VL - 34 IS - 1 ER - TY - JOUR A1 - Kiewisz, Robert A1 - Fabig, Gunar A1 - Conway, William A1 - Baum, Daniel A1 - Needleman, Daniel A1 - Müller-Reichert, Thomas T1 - Three-dimensional structure of kinetochore-fibers in human mitotic spindles JF - eLife N2 - During cell division, kinetochore microtubules (KMTs) provide a physical linkage between the chromosomes and the rest of the spindle. KMTs in mammalian cells are organized into bundles, so-called kinetochore-fibers (k-fibers), but the ultrastructure of these fibers is currently not well characterized. Here we show by large-scale electron tomography that each k-fiber in HeLa cells in metaphase is composed of approximately nine KMTs, only half of which reach the spindle pole. Our comprehensive reconstructions allowed us to analyze the three-dimensional (3D) morphology of k-fibers and their surrounding MTs in detail. We found that k-fibers exhibit remarkable variation in circumference and KMT density along their length, with the pole-proximal side showing a broadening. Extending our structural analysis then to other MTs in the spindle, we further observed that the association of KMTs with non-KMTs predominantly occurs in the spindle pole regions. Our 3D reconstructions have implications for KMT growth and k-fiber self-organization models as covered in a parallel publication applying complementary live-cell imaging in combination with biophysical modeling (Conway et al., 2022). Finally, we also introduce a new visualization tool allowing an interactive display of our 3D spindle data that will serve as a resource for further structural studies on mitosis in human cells. Y1 - 2022 U6 - https://doi.org/10.7554/eLife.75459 VL - 11 SP - e75459 ER -