TY - CHAP A1 - Mexi, Gioni A1 - Shamsi, Somayeh A1 - Besançon, Mathieu A1 - Bodic, Pierre T1 - Probabilistic Lookahead Strong Branching via a Stochastic Abstract Branching Model T2 - Integration of Constraint Programming, Artificial Intelligence, and Operations Research. CPAIOR 2024 N2 - Strong Branching (SB) is a cornerstone of all modern branching rules used in the Branch-and-Bound (BnB) algorithm, which is at the center of Mixed-Integer Programming solvers. In its full form, SB evaluates all variables to branch on and then selects the one producing the best relaxation, leading to small trees, but high runtimes. State-of-the-art branching rules therefore use SB with working limits to achieve both small enough trees and short run times. So far, these working limits have been established empirically. In this paper, we introduce a theoretical approach to guide how much SB to use at each node within the BnB. We first define an abstract stochastic tree model of the BnB algorithm where the geometric mean dual gains of all variables follow a given probability distribution. This model allows us to relate expected dual gains to tree sizes and explicitly compare the cost of sampling an additional SB candidate with the reward in expected tree size reduction. We then leverage the insight from the abstract model to design a new stopping criterion for SB, which fits a distribution to the dual gains and, at each node, dynamically continues or interrupts SB. This algorithm, which we refer to as Probabilistic Lookahead Strong Branching, improves both the tree size and runtime over MIPLIB instances, providing evidence that the method not only changes the amount of SB, but allocates it better. Y1 - 2024 U6 - https://doi.org/10.1007/978-3-031-60599-4_4 VL - 14743 ER - TY - JOUR A1 - Eifler, Leon A1 - Gleixner, Ambros T1 - Safe and verified Gomory mixed integer cuts in a rational MIP framework JF - SIAM Journal on Optimization N2 - This paper is concerned with the exact solution of mixed-integer programs (MIPs) over the rational numbers, i.e., without any roundoff errors and error tolerances. Here, one computational bottleneck that should be avoided whenever possible is to employ large-scale symbolic computations. Instead it is often possible to use safe directed rounding methods, e.g., to generate provably correct dual bounds. In this work, we continue to leverage this paradigm and extend an exact branch-and-bound framework by separation routines for safe cutting planes, based on the approach first introduced by Cook, Dash, Fukasawa, and Goycoolea in 2009 [INFORMS J. Comput., 21 (2009), pp. 641–649]. Constraints are aggregated safely using approximate dual multipliers from an LP solve, followed by mixed-integer rounding to generate provably valid, although slightly weaker inequalities. We generalize this approach to problem data that is not representable in floating-point arithmetic, add routines for controlling the encoding length of the resulting cutting planes, and show how these cutting planes can be verified according to the VIPR certificate standard. Furthermore, we analyze the performance impact of these cutting planes in the context of an exact MIP framework, showing that we can solve 21.5% more instances to exact optimality and reduce solving times by 26.8% on the MIPLIB 2017 benchmark test set. Y1 - 2024 U6 - https://doi.org/10.1137/23M156046X VL - 34 IS - 1 ER - TY - CHAP A1 - Ghannam, Mohammed A1 - Gleixner, Ambros T1 - Hybrid genetic search for dynamic vehicle routing with time windows T2 - Proceedings of Conference of the Society for Operations Research in Germany Y1 - 2023 ER - TY - CHAP A1 - Hoen, Alexander A1 - Oertel, Andy A1 - Gleixner, Ambros A1 - Nordström, Jakob T1 - Certifying MIP-based presolve reductions for 0-1 integer linear programs T2 - Integration of Constraint Programming, Artificial Intelligence, and Operations Research. CPAIOR 2024 N2 - It is well known that reformulating the original problem can be crucial for the performance of mixed-integer programming (MIP) solvers. To ensure correctness, all transformations must preserve the feasibility status and optimal value of the problem, but there is currently no established methodology to express and verify the equivalence of two mixed-integer programs. In this work, we take a first step in this direction by showing how the correctness of MIP presolve reductions on – integer linear programs can be certified by using (and suitably extending) the VeriPB tool for pseudo-Boolean proof logging. Our experimental evaluation on both decision and optimization instances demonstrates the computational viability of the approach and leads to suggestions for future revisions of the proof format that will help to reduce the verbosity of the certificates and to accelerate the certification and verification process further. Y1 - 2024 U6 - https://doi.org/10.1007/978-3-031-60597-0_20 VL - 14742 ER - TY - JOUR A1 - Eifler, Leon A1 - Gleixner, Ambros T1 - A computational status update for exact rational mixed integer programming JF - Mathematical Programming N2 - The last milestone achievement for the roundoff-error-free solution of general mixed integer programs over the rational numbers was a hybrid-precision branch-and-bound algorithm published by Cook, Koch, Steffy, and Wolter in 2013. We describe a substantial revision and extension of this framework that integrates symbolic presolving, features an exact repair step for solutions from primal heuristics, employs a faster rational LP solver based on LP iterative refinement, and is able to produce independently verifiable certificates of optimality. We study the significantly improved performance and give insights into the computational behavior of the new algorithmic components. On the MIPLIB 2017 benchmark set, we observe an average speedup of 10.7x over the original framework and 2.9 times as many instances solved within a time limit of two hours. Y1 - 2023 U6 - https://doi.org/10.1007/s10107-021-01749-5 VL - 197 SP - 793 EP - 812 ER - TY - JOUR A1 - Besançon, Mathieu A1 - Garcia, Joaquim Dias A1 - Legat, Benoît A1 - Sharma, Akshay T1 - Flexible Differentiable Optimization via Model Transformations JF - INFORMS Journal on Computing N2 - We introduce DiffOpt.jl, a Julia library to differentiate through the solution of optimization problems with respect to arbitrary parameters present in the objective and/or constraints. The library builds upon MathOptInterface, thus leveraging the rich ecosystem of solvers and composing well with modeling languages like JuMP. DiffOpt offers both forward and reverse differentiation modes, enabling multiple use cases from hyperparameter optimization to backpropagation and sensitivity analysis, bridging constrained optimization with end-to-end differentiable programming. DiffOpt is built on two known rules for differentiating quadratic programming and conic programming standard forms. However, thanks to its ability to differentiate through model transformations, the user is not limited to these forms and can differentiate with respect to the parameters of any model that can be reformulated into these standard forms. This notably includes programs mixing affine conic constraints and convex quadratic constraints or objective function. Y1 - 2023 U6 - https://doi.org/10.1287/ijoc.2022.0283 VL - 36 IS - 2 SP - 456 EP - 478 ER - TY - JOUR A1 - Bonami, Pierre A1 - Gleixner, Ambros A1 - Linderoth, Jeff A1 - Misener, Ruth T1 - Designing and Implementing Algorithms for Mixed-Integer Nonlinear Optimization (Dagstuhl Seminar 18081) JF - Dagstuhl Reports N2 - Mathematical models for optimal decisions often require both nonlinear and discrete components. These mixed-integer nonlinear programs (MINLP) may be used to optimize the energy use of large industrial plants, integrate renewable sources into energy networks, design biological and biomedical systems, and address numerous other applications of societal importance. The first MINLP algorithms and software were designed by application engineers. While these efforts initially proved useful, scientists, engineers, and practitioners have realized that a transformational shift in technology will be required for MINLP to achieve its full potential. MINLP has transitioned to a forefront position in computer science, with researchers actively developing MINLP theory, algorithms, and implementations. Even with their concerted effort, algorithms and available software are often unable to solve practically-sized instances of these important models. Current obstacles include characterizing the computability boundary, effectively exploiting known optimization technologies for specialized classes of MINLP, and effectively using logical formulas holistically throughout algorithms. Y1 - 2018 U6 - https://doi.org/10.4230/DagRep.8.2.64 VL - 8 IS - 2 SP - 64 EP - 87 ER - TY - JOUR A1 - Müller, Benjamin A1 - Muñoz, Gonzalo A1 - Gasse, Maxime A1 - Gleixner, Ambros A1 - Lodi, Andrea A1 - Serrano, Felipe T1 - On generalized surrogate duality in mixed-integer nonlinear programming JF - Mathematical Programming N2 - The most important ingredient for solving mixed-integer nonlinear programs (MINLPs) to global ϵ-optimality with spatial branch and bound is a tight, computationally tractable relaxation. Due to both theoretical and practical considerations, relaxations of MINLPs are usually required to be convex. Nonetheless, current optimization solvers can often successfully handle a moderate presence of nonconvexities, which opens the door for the use of potentially tighter nonconvex relaxations. In this work, we exploit this fact and make use of a nonconvex relaxation obtained via aggregation of constraints: a surrogate relaxation. These relaxations were actively studied for linear integer programs in the 70s and 80s, but they have been scarcely considered since. We revisit these relaxations in an MINLP setting and show the computational benefits and challenges they can have. Additionally, we study a generalization of such relaxation that allows for multiple aggregations simultaneously and present the first algorithm that is capable of computing the best set of aggregations. We propose a multitude of computational enhancements for improving its practical performance and evaluate the algorithm’s ability to generate strong dual bounds through extensive computational experiments. Y1 - 2022 U6 - https://doi.org/10.1007/s10107-021-01691-6 VL - 192 IS - 1 SP - 89 EP - 118 ER - TY - JOUR A1 - Gamrath, Gerald T1 - Improving strong branching by domain propagation JF - EURO Journal on Computational Optimization N2 - One of the essential components of a branch-and-bound based mixed-integer linear programming (MIP) solver is the branching rule. Strong branching is a method used by many state-of-the-art branching rules to select the variable to branch on. It precomputes the dual bounds of potential child nodes by solving auxiliary linear programs (LPs) and thereby helps to take good branching decisions that lead to a small search tree. In this paper, we describe how these dual bound predictions can be improved by including domain propagation into strong branching. Domain propagation is a technique MIP solvers usually apply at every node of the branch-and-bound tree to tighten the local domains of variables. Computational experiments on standard MIP instances indicate that our improved strong branching method significantly improves the quality of the predictions and causes almost no additional effort. For a full strong branching rule, we are able to obtain substantial reductions of the branch-and-bound tree size as well as the solving time. Moreover, the state-of-the-art hybrid branching rule can be improved this way as well. This paper extends previous work by the author published in the proceedings of the CPAIOR 2013. Y1 - 2014 U6 - https://doi.org/10.1007/s13675-014-0021-8 VL - 2 IS - 3 SP - 99 EP - 122 PB - Springer CY - Berlin Heidelberg ER - TY - GEN A1 - Shinano, Yuji A1 - Heinz, Stefan A1 - Vigerske, Stefan A1 - Winkler, Michael T1 - FiberSCIP - A shared memory parallelization of SCIP N2 - Recently, parallel computing environments have become significantly popular. In order to obtain the benefit of using parallel computing environments, we have to deploy our programs for these effectively. This paper focuses on a parallelization of SCIP (Solving Constraint Integer Programs), which is a MIP solver and constraint integer programming framework available in source code. There is a parallel extension of SCIP named ParaSCIP, which parallelizes SCIP on massively parallel distributed memory computing environments. This paper describes FiberSCIP, which is yet another parallel extension of SCIP to utilize multi-threaded parallel computation on shared memory computing environments, and has the following contributions: First, the basic concept of having two parallel extensions and the relationship between them and the parallelization framework provided by UG (Ubiquity Generator) is presented, including an implementation of deterministic parallelization. Second, the difficulties to achieve a good performance that utilizes all resources on an actual computing environment and the difficulties of performance evaluation of the parallel solvers are discussed. Third, a way to evaluate the performance of new algorithms and parameter settings of the parallel extensions is presented. Finally, current performance of FiberSCIP for solving mixed-integer linear programs (MIPs) and mixed-integer non-linear programs (MINLPs) in parallel is demonstrated. T3 - ZIB-Report - 13-55 KW - parallel KW - branch-and-bound KW - deterministic parallelism KW - constraint integer programming KW - mixed integer programming KW - mixed integer nonlinear programming KW - SCIP KW - MIP KW - MINLP Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-42595 SN - 1438-0064 ER - TY - THES A1 - Hendel, Gregor T1 - Empirical Analysis of Solving Phases in Mixed Integer Programming N2 - Modern solving software for mixed-integer programming (MIP) incorporates numerous algorithmic components whose behavior is controlled by user parameter choices, and whose usefulness dramatically varies depending on the progress of the solving process. In this thesis, our aim is to construct a phase-based solver that dynamically reacts on phase transitions with an appropriate change of its component behavior. Therefore, we decompose the branch-and-bound solving process into three distinct phases: The first phase objective is to find a feasible solution. During the second phase, a sequence of incumbent solutions gets constructed until the incumbent is eventually optimal. Proving optimality is the central objective of the remaining third phase. Based on the MIP-solver SCIP we construct a phase-based solver to make use of the phase concept in two steps: First, we identify promising components for every solving phase individually and show that their combination is beneficial on a test bed of practical MIP instances. We then present and evaluate three heuristic criteria to make use of the phase-based solver in practice, where it is infeasible to distinguish between the last two phases before the termination of the solving process. KW - mixed-integer programming KW - branch-and-cut Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-54270 ER - TY - THES A1 - Witzig, Jakob T1 - Reoptimization Techniques in MIP Solvers N2 - Many optimization problems can be modeled as Mixed Integer Programs (MIPs). In general, MIPs cannot be solved efficiently, since solving MIPs is NP-hard, see, e.g., Schrijver, 2003. Common methods for solving NP-hard problems are branch-and-bound and column generation. In the case of column generation, the original problem becomes decomposed or re-formulated into one ore more smaller subproblems, which are easier to solve. Each of these subproblems is solved separately and recurrently, which can be interpreted as solving a sequence of optimization problems. In this thesis, we consider a sequence of MIPs which only differ in the respective objective functions. Furthermore, we assume each of these MIPs get solved with a branch-and-bound algorithm. This thesis aims to figure out whether the solving process of a given sequence of MIPs can be accelerated by reoptimization. As reoptimization we understand starting the solving process of a MIP of this sequence at a given frontier of a search tree corresponding to another MIP of this sequence. At the beginning we introduce an LP-based branch-and-bound algorithm. This algorithm is inspired by the reoptimizing algorithm of Hiller, Klug, and the author of this thesis, 2013. Since most of the state-of-the-art MIP solvers come to decisions based on dual information, which leads to the loss of feasible solutions after changing the objective function, we present a technique to guarantee optimality despite using these information. A decision is based on a dual information if this decision is valid for at least one feasible solution, whereas a decision is based on a primal information if this decision is valid for all feasible solutions. Afterwards, we consider representing the search frontier of the tree by a set of nodes of a given size. We call this the Tree Compression Problem. Moreover, we present a criterion characterizing the similarity of two objective functions. To evaluate our approach of reoptimization we extend the well-known and well-maintained MIP solver SCIP to an LP-based branch-and-bound framework, introduce two heuristics for solving the Tree Compression Problem, and a primal heuristic which is especially fitted to column generation. Finally, we present computational experiments on several problem classes, e.g., the Vertex Coloring and k-Constrained Shortest Path. Our experiments show, that a straightforward reoptimization, i.e., without additional heuristics, provides no benefit in general. However, in combination with the techniques and methods presented in this thesis, we can accelerate the solving of a given sequence up to the factor 14. For this purpose it is essential to take the differences of the objective functions into account and to restart the reoptimization, i.e., solve the subproblem from scratch, if the objective functions are not similar enough. Finally, we discuss the possibility to parallelize the solving process of the search frontier at the beginning of each solving process. Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-54067 ER - TY - GEN A1 - Gamrath, Gerald A1 - Melchiori, Anna A1 - Berthold, Timo A1 - Gleixner, Ambros A1 - Salvagnin, Domenico T1 - Branching on multi-aggregated variables N2 - In mixed-integer programming, the branching rule is a key component to a fast convergence of the branch-and-bound algorithm. The most common strategy is to branch on simple disjunctions that split the domain of a single integer variable into two disjoint intervals. Multi-aggregation is a presolving step that replaces variables by an affine linear sum of other variables, thereby reducing the problem size. While this simplification typically improves the performance of MIP solvers, it also restricts the degree of freedom in variable-based branching rules. We present a novel branching scheme that tries to overcome the above drawback by considering general disjunctions defined by multi-aggregated variables in addition to the standard disjunctions based on single variables. This natural idea results in a hybrid between variable- and constraint-based branching rules. Our implementation within the constraint integer programming framework SCIP incorporates this into a full strong branching rule and reduces the number of branch-and-bound nodes on a general test set of publicly available benchmark instances. For a specific class of problems, we show that the solving time decreases significantly. T3 - ZIB-Report - 15-10 KW - mixed-integer programming, branch-and-bound, branching rule, strong branching Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-53829 SN - 1438-0064 ER - TY - GEN A1 - Witzig, Jakob A1 - Gamrath, Gerald A1 - Hiller, Benjamin T1 - Reoptimization Techniques in MIP Solvers N2 - Recently, there have been many successful applications of optimization algorithms that solve a sequence of quite similar mixed-integer programs (MIPs) as subproblems. Traditionally, each problem in the sequence is solved from scratch. In this paper we consider reoptimization techniques that try to benefit from information obtained by solving previous problems of the sequence. We focus on the case that subsequent MIPs differ only in the objective function or that the feasible region is reduced. We propose extensions of the very complex branch-and-bound algorithms employed by general MIP solvers based on the idea to ``warmstart'' using the final search frontier of the preceding solver run. We extend the academic MIP solver SCIP by these techniques to obtain a reoptimizing branch-and-bound solver and report computational results which show the effectiveness of the approach. T3 - ZIB-Report - 15-24 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-54375 SN - 1438-0064 ER - TY - GEN A1 - Maher, Stephen J. A1 - Fischer, Tobias A1 - Gally, Tristan A1 - Gamrath, Gerald A1 - Gleixner, Ambros A1 - Gottwald, Robert Lion A1 - Hendel, Gregor A1 - Koch, Thorsten A1 - Lübbecke, Marco A1 - Miltenberger, Matthias A1 - Müller, Benjamin A1 - Pfetsch, Marc A1 - Puchert, Christian A1 - Rehfeldt, Daniel A1 - Schenker, Sebastian A1 - Schwarz, Robert A1 - Serrano, Felipe A1 - Shinano, Yuji A1 - Weninger, Dieter A1 - Witt, Jonas T. A1 - Witzig, Jakob T1 - The SCIP Optimization Suite 4.0 N2 - The SCIP Optimization Suite is a powerful collection of optimization software that consists of the branch-cut-and-price framework and mixed-integer programming solver SCIP, the linear programming solver SoPlex, the modeling language Zimpl, the parallelization framework UG, and the generic branch-cut-and-price solver GCG. Additionally, it features the extensions SCIP-Jack for solving Steiner tree problems, PolySCIP for solving multi-objective problems, and SCIP-SDP for solving mixed-integer semidefinite programs. The SCIP Optimization Suite has been continuously developed and has now reached version 4.0. The goal of this report is to present the recent changes to the collection. We not only describe the theoretical basis, but focus on implementation aspects and their computational consequences. T3 - ZIB-Report - 17-12 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-62170 SN - 1438-0064 ER - TY - JOUR A1 - Yokoyama, Ryohei A1 - Shinano, Yuji A1 - Taniguchi, Syusuke A1 - Ohkura, Masashi A1 - Wakui, Tetsuya T1 - Optimization of energy supply systems by MILP branch and bound method in consideration of hierarchical relationship between design and operation JF - Energy Conversion and Management N2 - To attain the highest performance of energy supply systems, it is necessary to rationally determine types, capacities, and numbers of equipment in consideration of their operational strategies corresponding to seasonal and hourly variations in energy demands. In the combinatorial optimization method based on the mixed-integer linear programming (MILP), integer variables are used to express the selection, numbers, and on/off status of operation of equipment, and the number of these variables increases with those of equipment and periods for variations in energy demands, and affects the computation efficiency significantly. In this paper, a MILP method utilizing the hierarchical relationship between design and operation variables is proposed to solve the optimal design problem of energy supply systems efficiently: At the upper level, the optimal values of design variables are searched by the branch and bound method; At the lower level, the values of operation variables are optimized independently at each period by the branch and bound method under the values of design variables given tentatively during the search at the upper level; Lower bounds for the optimal value of the objective function to be minimized are evaluated, and are utilized for the bounding operations at both the levels. This method is implemented into open and commercial MILP solvers. Illustrative and practical case studies on the optimal design of cogeneration systems are conducted, and the validity and effectiveness of the proposed method are clarified. Y1 - 2015 U6 - https://doi.org/10.1016/j.enconman.2014.12.020 VL - 92 SP - 92 EP - 104 ER - TY - CHAP A1 - Yokoyama, Ryohei A1 - Shinano, Yuji T1 - MILP Approaches to Optimal Design and Operation of Distributed Energy Systems T2 - Optimization in the Real World N2 - Energy field is one of the practical areas to which optimization can contribute significantly. In this chapter, the application of mixed-integer linear programming (MILP) approaches to optimal design and operation of distributed energy systems is described. First, the optimal design and operation problems are defined, and relevant previous work is reviewed. Then, an MILP method utilizing the hierarchical relationship between design and operation variables is presented. In the optimal design problem, integer variables are used to express the types, capacities, numbers, operation modes, and on/off states of operation of equipment, and the number of these variables increases with those of equipment and periods for variations in energy demands, and affects the computation efficiency significantly. The presented method can change the enumeration tree for the branching and bounding procedures, and can search the optimal solution very efficiently. Finally, future work in relation to this method is described. Y1 - 2015 SN - 978-4-431-55419-6 U6 - https://doi.org/10.1007/978-4-431-55420-2_9 VL - Volume 13 SP - 157 EP - 176 PB - Springer ER - TY - GEN A1 - Gamrath, Gerald A1 - Fischer, Tobias A1 - Gally, Tristan A1 - Gleixner, Ambros A1 - Hendel, Gregor A1 - Koch, Thorsten A1 - Maher, Stephen J. A1 - Miltenberger, Matthias A1 - Müller, Benjamin A1 - Pfetsch, Marc A1 - Puchert, Christian A1 - Rehfeldt, Daniel A1 - Schenker, Sebastian A1 - Schwarz, Robert A1 - Serrano, Felipe A1 - Shinano, Yuji A1 - Vigerske, Stefan A1 - Weninger, Dieter A1 - Winkler, Michael A1 - Witt, Jonas T. A1 - Witzig, Jakob T1 - The SCIP Optimization Suite 3.2 N2 - The SCIP Optimization Suite is a software toolbox for generating and solving various classes of mathematical optimization problems. Its major components are the modeling language ZIMPL, the linear programming solver SoPlex, the constraint integer programming framework and mixed-integer linear and nonlinear programming solver SCIP, the UG framework for parallelization of branch-and-bound-based solvers, and the generic branch-cut-and-price solver GCG. It has been used in many applications from both academia and industry and is one of the leading non-commercial solvers. This paper highlights the new features of version 3.2 of the SCIP Optimization Suite. Version 3.2 was released in July 2015. This release comes with new presolving steps, primal heuristics, and branching rules within SCIP. In addition, version 3.2 includes a reoptimization feature and improved handling of quadratic constraints and special ordered sets. SoPlex can now solve LPs exactly over the rational number and performance improvements have been achieved by exploiting sparsity in more situations. UG has been tested successfully on 80,000 cores. A major new feature of UG is the functionality to parallelize a customized SCIP solver. GCG has been enhanced with a new separator, new primal heuristics, and improved column management. Finally, new and improved extensions of SCIP are presented, namely solvers for multi-criteria optimization, Steiner tree problems, and mixed-integer semidefinite programs. T3 - ZIB-Report - 15-60 KW - mixed-integer linear and nonlinear programming KW - MIP solver KW - MINLP solver KW - linear programming KW - LP solver KW - simplex method KW - modeling KW - parallel branch-and-bound KW - branch-cut-and-price framework KW - generic column generation KW - Steiner tree solver KW - multi-criteria optimization KW - mixed-integer semidefinite programming Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-57675 SN - 1438-0064 ER - TY - GEN A1 - Ballerstein, Martin A1 - Michaels, Dennis A1 - Vigerske, Stefan T1 - Linear Underestimators for bivariate functions with a fixed convexity behavior N2 - This is a technical report for the SCIP constraint handler cons_bivariate. We describe a cut-generation algorithm for a class of bivariate twice continuously differentiable functions with fixed convexity behavior over a box. Computational results comparing our cut-generation algorithms with state-of-the-art global optimization software on a series of randomly generated test instances are reported and discussed. T3 - ZIB-Report - 13-02 KW - bivariate functions KW - convex envelope KW - global optimization KW - linear underestimator Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-17641 SN - 1438-0064 ER - TY - GEN A1 - Berthold, Timo A1 - Hendel, Gregor T1 - Shift-And-Propagate N2 - For mixed integer programming, recent years have seen a growing interest in the design of general purpose primal heuristics for use inside complete solvers. Many of these heuristics rely on an optimal LP solution. Finding this may itself take a significant amount of time. The presented paper addresses this issue by the introduction of the Shift-And-Propagate heuristic. Shift-And-Propagate is a pre-root primal heuristic that does not require a previously found LP solution. It applies domain propagation techniques to quickly drive a variable assignment towards feasibility. Computational experiments indicate that this heuristic is a powerful supplement of existing rounding and propagation heuristics. T3 - ZIB-Report - 13-03 KW - primal heuristic KW - mixed integer programming KW - domain propagation KW - rounding Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-17596 SN - 1438-0064 ER - TY - JOUR A1 - Gamrath, Gerald A1 - Koch, Thorsten A1 - Maher, Stephen J. A1 - Rehfeldt, Daniel A1 - Shinano, Yuji T1 - SCIP-Jack – A solver for STP and variants with parallelization extensions JF - Mathematical Programming Computation N2 - The Steiner tree problem in graphs is a classical problem that commonly arises in practical applications as one of many variants. While often a strong relationship between different Steiner tree problem variants can be observed, solution approaches employed so far have been prevalently problem-specific. In contrast, this paper introduces a general-purpose solver that can be used to solve both the classical Steiner tree problem and many of its variants without modification. This versatility is achieved by transforming various problem variants into a general form and solving them by using a state-of-the-art MIP-framework. The result is a high-performance solver that can be employed in massively parallel environments and is capable of solving previously unsolved instances. Y1 - 2017 U6 - https://doi.org/10.1007/s12532-016-0114-x VL - 9 IS - 2 SP - 231 EP - 296 ER - TY - CHAP A1 - Shinano, Yuji A1 - Berthold, Timo A1 - Heinz, Stefan T1 - A First Implementation of ParaXpress: Combining Internal and External Parallelization to Solve MIPs on Supercomputers T2 - Mathematical Software - ICMS 2016, 5th International Conference Berlin, Germany, July 11-14, 2016 Proceedings Y1 - 2016 U6 - https://doi.org/10.1007/978-3-319-42432-3_38 SP - 308 EP - 316 ER -