TY - GEN A1 - Shinano, Yuji A1 - Achterberg, Tobias A1 - Berthold, Timo A1 - Heinz, Stefan A1 - Koch, Thorsten T1 - ParaSCIP - a parallel extension of SCIP N2 - Mixed integer programming (MIP) has become one of the most important techniques in Operations Research and Discrete Optimization. SCIP (Solving Constraint Integer Programs) is currently one of the fastest non-commercial MIP solvers. It is based on the branch-and-bound procedure in which the problem is recursively split into smaller subproblems, thereby creating a so-called branching tree. We present ParaSCIP, an extension of SCIP, which realizes a parallelization on a distributed memory computing environment. ParaSCIP uses SCIP solvers as independently running processes to solve subproblems (nodes of the branching tree) locally. This makes the parallelization development independent of the SCIP development. Thus, ParaSCIP directly profits from any algorithmic progress in future versions of SCIP. Using a first implementation of ParaSCIP, we were able to solve two previously unsolved instances from MIPLIB2003, a standard test set library for MIP solvers. For these computations, we used up to 2048 cores of the HLRN~II supercomputer. T3 - ZIB-Report - 10-27 KW - massive parallization KW - mixed integer programming KW - ParaSCIP KW - branch-and-cut KW - branch-and-bound Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-11921 UR - http://www.springerlink.com/content/t2160206253v7661/ ER - TY - GEN A1 - Koch, Thorsten A1 - Ralphs, Ted A1 - Shinano, Yuji T1 - What could a million CPUs do to solve Integer Programs? N2 - Given the steady increase in cores per CPU, it is only a matter of time until supercomputers will have a million or more cores. In this article, we investigate the opportunities and challenges that will arise when trying to utilize this vast computing power to solve a single integer linear optimization problem. We also raise the question of whether best practices in sequential solution of ILPs will be effective in massively parallel environments. T3 - ZIB-Report - 11-40 Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-14222 SN - 1438-0064 ER - TY - CHAP A1 - Shinano, Yuji A1 - Berthold, Timo A1 - Heinz, Stefan T1 - A First Implementation of ParaXpress: Combining Internal and External Parallelization to Solve MIPs on Supercomputers T2 - Mathematical Software - ICMS 2016, 5th International Conference Berlin, Germany, July 11-14, 2016 Proceedings Y1 - 2016 U6 - https://doi.org/10.1007/978-3-319-42432-3_38 SP - 308 EP - 316 ER - TY - CHAP A1 - Berthold, Timo A1 - Gleixner, Ambros A1 - Heinz, Stefan A1 - Koch, Thorsten A1 - Shinano, Yuji T1 - SCIP Optimization Suite を利用した 混合整数(線形/非線形) 計画問題の解法 T2 - Proceedings of the 24th RAMP symposium. The Operations Society of Japan, RAMP: Research Association of Mathematical Programming N2 - この論文ではソフトウェア・パッケージSCIP Optimization Suite を紹介し,その3つの構成要素:モデリン グ言語Zimpl, 線形計画(LP: linear programming) ソルバSoPlex, そして,制約整数計画(CIP: constraint integer programming) に対するソフトウェア・フレームワークSCIP, について述べる.本論文では,この3つの 構成要素を利用して,どのようにして挑戦的な混合整数線形計画問題(MIP: mixed integer linear optimization problems) や混合整数非線形計画問題(MINLP: mixed integer nonlinear optimization problems) をモデル化 し解くのかを説明する.SCIP は,現在,最も高速なMIP,MINLP ソルバの1つである.いくつかの例により, Zimpl, SCIP, SoPlex の利用方法を示すとともに,利用可能なインタフェースの概要を示す.最後に,将来の開 発計画の概要について述べる. N2 - This paper introduces the SCIP Optimization Suite and discusses the capabilities of its three components: the modeling language Zimpl, the linear programming solver SoPlex, and the constraint integer programming framework SCIP. We explain how in concert these can be used to model and solve challenging mixed integer linear and nonlinear optimization problems. SCIP is currently one of the fastest non-commercial MIP and MINLP solvers. We demonstrate the usage of Zimpl, SCIP, and SoPlex by selected examples, we give an overview over available interfaces, and outline plans for future development. Y1 - 2012 SP - 165 EP - 192 ER - TY - GEN A1 - Yokoyama, Ryohei A1 - Shinano, Yuji A1 - Taniguchi, Syusuke A1 - Ohkura, Masashi A1 - Wakui, Tetsuya T1 - Optimization of energy supply systems by MILP branch and bound method in consideration of hierarchical relationship between design and operation N2 - To attain the highest performance of energy supply systems, it is necessary to rationally determine types, capacities, and numbers of equipment in consideration of their operational strategies corresponding to seasonal and hourly variations in energy demands. In the combinatorial optimization method based on the mixed-integer linear programming (MILP), integer variables are used to express the selection, numbers, and on/off status of operation of equipment, and the number of these variables increases with those of equipment and periods for variations in energy demands, and affects the computation efficiency significantly. In this paper, a MILP method utilizing the hierarchical relationship between design and operation variables is proposed to solve the optimal design problem of energy supply systems efficiently: At the upper level, the optimal values of design variables are searched by the branch and bound method; At the lower level, the values of operation variables are optimized independently at each period by the branch and bound method under the values of design variables given tentatively during the search at the upper level; Lower bounds for the optimal value of the objective function are evaluated, and are utilized for the bounding operations at both the levels. This method is implemented into open and commercial MILP solvers. Illustrative and practical case studies on the optimal design of cogeneration systems are conducted, and the validity and effectiveness of the proposed method are clarified. T3 - ZIB-Report - 14-09 KW - Energy supply systems KW - Optimal design KW - Optimal operation KW - Mixed-integer linear programming KW - Branch and bound method KW - Hierarchical approach Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-49413 SN - 1438-0064 ER - TY - JOUR A1 - Shinano, Yuji A1 - Inui, Nobuo A1 - Fukagawa, Youzou A1 - Takakura, Noburu T1 - Optimizing Movement Sequences for Step-and-Scan Lithography Equipment JF - Journal of Advanced Mechanical Design, Systems, and Manufacturing N2 - The purpose of this work is to improve the throughput of step-and-scan lithography equipment to shorten the production time of a wafer. For this purpose, we propose a method for solving the MSOP (Movement Sequence Optimization Problem), which is the problem of computing the fastest schedule for visiting all shots on a wafer. It is well-known that the MSOP on step-and-repeat lithography equipment can be modeled as a traveling salesman problem. In contrast to step-and-repeat lithography equipment, a schedule for step-and-scan lithography equipment must also indicate the scanning direction of each shot, in addition to the sequence of the shots. For this reason, the traveling salesman problem formulation for step-and-repeat lithography equipment cannot be applied to solve the MSOP on step-and-scan lithography equipment directly. We overcame this difficulty by introducing auxiliary vertices to model the scanning directions in the traveling salesman problem formulation. By this method, we were able to compute exact optimal sequences considering the scanning directions of shots for several MSOP instances. Our numerical experiments demonstrated that our proposed method was capable of computing exact optimal solutions for real-world MSOP instances having up to 232 shots on a wafer. These optimal solutions gave a 0.25% to 4.66% improvement in productivity over solutions computed by previously known methods. Y1 - 2013 U6 - https://doi.org/10.1299/jamdsm.7.608 VL - 7 IS - 4 SP - 608 EP - 618 ER - TY - GEN A1 - Ralphs, Ted A1 - Shinano, Yuji A1 - Berthold, Timo A1 - Koch, Thorsten T1 - Parallel Solvers for Mixed Integer Linear Programming N2 - In this article, we introduce parallel mixed integer linear programming (MILP) solvers. MILP solving algorithms have been improved tremendously in the last two decades. Currently, commercial MILP solvers are known as a strong optimization tool. Parallel MILP solver development has started in 1990s. However, since the improvements of solving algorithms have much impact to solve MILP problems than application of parallel computing, there were not many visible successes. With the spread of multi-core CPUs, current state-of-the-art MILP solvers have parallel implementations and researches to apply parallelism in the solving algorithm also getting popular. We summarize current existing parallel MILP solver architectures. T3 - ZIB-Report - 16-74 KW - parallel computing KW - integer programming KW - branch-and-bound KW - supercomputing Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-62239 SN - 1438-0064 ER - TY - CHAP A1 - Shinano, Yuji A1 - Achterberg, Tobias A1 - Berthold, Timo A1 - Heinz, Stefan A1 - Koch, Thorsten ED - Bischof, Christian ED - Hegering, Heinz-Gerd ED - Nagel, Wolfgang ED - Wittum, Gabriel T1 - ParaSCIP: a parallel extension of SCIP T2 - Competence in High Performance Computing 2010 Y1 - 2012 U6 - https://doi.org/10.1007/978-3-642-24025-6_12 SP - 135 EP - 148 PB - Springer ER - TY - JOUR A1 - Koch, Thorsten A1 - Ralphs, Ted A1 - Shinano, Yuji T1 - Could we use a million cores to solve an integer program? JF - Mathematical Methods of Operations Research Y1 - 2012 U6 - https://doi.org/10.1007/s00186-012-0390-9 VL - 76 IS - 1 SP - 67 EP - 93 ER - TY - GEN A1 - Berthold, Timo A1 - Gleixner, Ambros A1 - Heinz, Stefan A1 - Koch, Thorsten A1 - Shinano, Yuji T1 - SCIP Optimization Suite を利用した 混合整数(線形/非線形) 計画問題の解法 T1 - Solving mixed integer linear and nonlinear problems using the SCIP Optimization Suite N2 - この論文ではソフトウェア・パッケージSCIP Optimization Suite を紹介し,その3つの構成要素:モデリン グ言語Zimpl, 線形計画(LP: linear programming) ソルバSoPlex, そして,制約整数計画(CIP: constraint integer programming) に対するソフトウェア・フレームワークSCIP, について述べる.本論文では,この3つの 構成要素を利用して,どのようにして挑戦的な混合整数線形計画問題(MIP: mixed integer linear optimization problems) や混合整数非線形計画問題(MINLP: mixed integer nonlinear optimization problems) をモデル化 し解くのかを説明する.SCIP は,現在,最も高速なMIP,MINLP ソルバの1つである.いくつかの例により, Zimpl, SCIP, SoPlex の利用方法を示すとともに,利用可能なインタフェースの概要を示す.最後に,将来の開 発計画の概要について述べる. N2 - This paper introduces the SCIP Optimization Suite and discusses the capabilities of its three components: the modeling language Zimpl, the linear programming solver SoPlex, and the constraint integer programming framework SCIP. We explain how in concert these can be used to model and solve challenging mixed integer linear and nonlinear optimization problems. SCIP is currently one of the fastest non-commercial MIP and MINLP solvers. We demonstrate the usage of Zimpl, SCIP, and SoPlex by selected examples, we give an overview over available interfaces, and outline plans for future development. T3 - ZIB-Report - 12-24 KW - SCIP, MIP, MINLP, CIP, LP, modeling, optimization Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-15598 SN - 1438-0064 ER - TY - GEN A1 - Berthold, Timo A1 - Gamrath, Gerald A1 - Gleixner, Ambros A1 - Heinz, Stefan A1 - Koch, Thorsten A1 - Shinano, Yuji T1 - Solving mixed integer linear and nonlinear problems using the SCIP Optimization Suite N2 - This paper introduces the SCIP Optimization Suite and discusses the capabilities of its three components: the modeling language Zimpl, the linear programming solver SoPlex, and the constraint integer programming framework SCIP. We explain how these can be used in concert to model and solve challenging mixed integer linear and nonlinear optimization problems. SCIP is currently one of the fastest non-commercial MIP and MINLP solvers. We demonstrate the usage of Zimpl, SCIP, and SoPlex by selected examples, we give an overview of available interfaces, and outline plans for future development. T3 - ZIB-Report - 12-27 KW - LP, MIP, CIP, MINLP, modeling, optimization, SCIP, SoPlex, Zimpl Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-15654 SN - 1438-0064 ER - TY - CHAP A1 - Yokoyama, Ryohei A1 - Shinano, Yuji T1 - MILP Approaches to Optimal Design and Operation of Distributed Energy Systems T2 - Optimization in the Real World N2 - Energy field is one of the practical areas to which optimization can contribute significantly. In this chapter, the application of mixed-integer linear programming (MILP) approaches to optimal design and operation of distributed energy systems is described. First, the optimal design and operation problems are defined, and relevant previous work is reviewed. Then, an MILP method utilizing the hierarchical relationship between design and operation variables is presented. In the optimal design problem, integer variables are used to express the types, capacities, numbers, operation modes, and on/off states of operation of equipment, and the number of these variables increases with those of equipment and periods for variations in energy demands, and affects the computation efficiency significantly. The presented method can change the enumeration tree for the branching and bounding procedures, and can search the optimal solution very efficiently. Finally, future work in relation to this method is described. Y1 - 2015 SN - 978-4-431-55419-6 U6 - https://doi.org/10.1007/978-4-431-55420-2_9 VL - Volume 13 SP - 157 EP - 176 PB - Springer ER - TY - JOUR A1 - Yokoyama, Ryohei A1 - Shinano, Yuji A1 - Taniguchi, Syusuke A1 - Ohkura, Masashi A1 - Wakui, Tetsuya T1 - Optimization of energy supply systems by MILP branch and bound method in consideration of hierarchical relationship between design and operation JF - Energy Conversion and Management N2 - To attain the highest performance of energy supply systems, it is necessary to rationally determine types, capacities, and numbers of equipment in consideration of their operational strategies corresponding to seasonal and hourly variations in energy demands. In the combinatorial optimization method based on the mixed-integer linear programming (MILP), integer variables are used to express the selection, numbers, and on/off status of operation of equipment, and the number of these variables increases with those of equipment and periods for variations in energy demands, and affects the computation efficiency significantly. In this paper, a MILP method utilizing the hierarchical relationship between design and operation variables is proposed to solve the optimal design problem of energy supply systems efficiently: At the upper level, the optimal values of design variables are searched by the branch and bound method; At the lower level, the values of operation variables are optimized independently at each period by the branch and bound method under the values of design variables given tentatively during the search at the upper level; Lower bounds for the optimal value of the objective function to be minimized are evaluated, and are utilized for the bounding operations at both the levels. This method is implemented into open and commercial MILP solvers. Illustrative and practical case studies on the optimal design of cogeneration systems are conducted, and the validity and effectiveness of the proposed method are clarified. Y1 - 2015 U6 - https://doi.org/10.1016/j.enconman.2014.12.020 VL - 92 SP - 92 EP - 104 ER - TY - CHAP A1 - Shinano, Yuji A1 - Achterberg, Tobias A1 - Berthold, Timo A1 - Heinz, Stefan A1 - Koch, Thorsten A1 - Winkler, Michael T1 - Solving Open MIP Instances with ParaSCIP on Supercomputers using up to 80,000 Cores T2 - Proc. of 30th IEEE International Parallel & Distributed Processing Symposium N2 - This paper describes how we solved 12 previously unsolved mixed-integer program- ming (MIP) instances from the MIPLIB benchmark sets. To achieve these results we used an enhanced version of ParaSCIP, setting a new record for the largest scale MIP computation: up to 80,000 cores in parallel on the Titan supercomputer. In this paper we describe the basic parallelization mechanism of ParaSCIP, improvements of the dynamic load balancing and novel techniques to exploit the power of parallelization for MIP solving. We give a detailed overview of computing times and statistics for solving open MIPLIB instances. Y1 - 2016 U6 - https://doi.org/10.1109/IPDPS.2016.56 ER - TY - CHAP A1 - Yokoyama, Ryohei A1 - Shinano, Yuji A1 - Taniguchi, Syusuke A1 - Ohkura, Masashi A1 - Wakui, Tetsuya T1 - Generation of multiple best solutions in multiobjective optimal design of energy supply systems T2 - Proceedings of the 15th International Conference on Power Engineering. ICOPE 2015 N2 - Optimization approaches based on the mixed-integer linear programming (MILP) have been utilized to design energy supply systems. In this paper, an MILP method utilizing the hierarchical relationship between design and operation is extended to search not only the optimal solution but also suboptimal ones which follow the optimal one without any omissions, what are called K-best solutions, efficiently in a multiobjective optimal design problem. At the upper level, the values of design variables for the K-best solutions are searched by the branch and bound method. At the lower level, the values of operation variables are optimized independently at each period by the branch and bound method under the values of design variables given tentatively. Incumbents for the K-best solutions and an upper bound for all the values of the objective function for the K-best solutions are renewed if necessary between both the levels. This method is implemented into a commercial MILP solver. A practical case study on the multiobjective optimal design of a cogeneration system is conducted, and the validity and effectiveness of the method are clarified. Y1 - 2015 U6 - https://doi.org/10.1299/jsmeicope.2015.12._ICOPE-15-_56 ER - TY - CHAP A1 - Shinano, Yuji A1 - Achterberg, Tobias A1 - Berthold, Timo A1 - Heinz, Stefan A1 - Koch, Thorsten A1 - Winkler, Michael ED - IEEE, T1 - Solving Hard MIPLIP2003 Problems with ParaSCIP on Supercomputers: An Update T2 - IPDPSW'14 Proceedings of the 2014 IEEE, International Parallel & Distributed Processing Symposium Workshops Y1 - 2014 SN - 978-1-4799-4117-9 U6 - https://doi.org/10.1109/IPDPSW.2014.174 SP - 1552 EP - 1561 PB - IEEE Computer Society CY - Washington, DC, USA ER - TY - CHAP A1 - Shinano, Yuji A1 - Rehfeldt, Daniel A1 - Koch, Thorsten T1 - Building Optimal Steiner Trees on Supercomputers by Using up to 43,000 Cores T2 - Integration of Constraint Programming, Artificial Intelligence, and Operations Research. CPAIOR 2019 N2 - SCIP-JACK is a customized, branch-and-cut based solver for Steiner tree and related problems. ug [SCIP-JACK, MPI] extends SCIP-JACK to a massively parallel solver by using the Ubiquity Generator (UG) framework. ug [SCIP-JACK, MPI] was the only solver that could run on a distributed environment at the (latest) 11th DIMACS Challenge in 2014. Furthermore, it could solve three well-known open instances and updated 14 best-known solutions to instances from the benchmark libary STEINLIB. After the DIMACS Challenge, SCIP-JACK has been considerably improved. However, the improvements were not reflected on ug [SCIP- JACK, MPI]. This paper describes an updated version of ug [SCIP-JACK, MPI], especially branching on constrains and a customized racing ramp-up. Furthermore, the different stages of the solution process on a supercomputer are described in detail. We also show the latest results on open instances from the STEINLIB. Y1 - 2019 U6 - https://doi.org/10.1007/978-3-030-19212-9_35 VL - 11494 SP - 529 EP - 539 PB - Springer ER - TY - CHAP A1 - Shinano, Yuji A1 - Rehfeldt, Daniel A1 - Gally, Tristan T1 - An Easy Way to Build Parallel State-of-the-art Combinatorial Optimization Problem Solvers: A Computational Study on Solving Steiner Tree Problems and Mixed Integer Semidefinite Programs by using ug[SCIP-*,*]-libraries T2 - Proceedings of the 9th IEEE Workshop Parallel / Distributed Combinatorics and Optimization N2 - Branch-and-bound (B&B) is an algorithmic framework for solving NP-hard combinatorial optimization problems. Although several well-designed software frameworks for parallel B&B have been developed over the last two decades, there is very few literature about successfully solving previously intractable combinatorial optimization problem instances to optimality by using such frameworks.The main reason for this limited impact of parallel solvers is that the algorithmic improvements for specific problem types are significantly greater than performance gains obtained by parallelization in general. Therefore, in order to solve hard problem instances for the first time, one needs to accelerate state-of-the-art algorithm implementations. In this paper, we present a computational study for solving Steiner tree problems and mixed integer semidefinite programs in parallel. These state-of-the-art algorithm implementations are based on SCIP and were parallelized via the ug[SCIP-*,*]-libraries---by adding less than 200 lines of glue code. Despite the ease of their parallelization, these solvers have the potential to solve previously intractable instances. In this paper, we demonstrate the convenience of such a parallelization and present results for previously unsolvable instances from the well-known PUC benchmark set, widely regarded as the most difficult Steiner tree test set in the literature. Y1 - 2019 U6 - https://doi.org/10.1109/IPDPSW.2019.00095 SP - 530 EP - 541 PB - IEEE ER - TY - CHAP A1 - Yokoyama, Ryohei A1 - Shinano, Yuji A1 - Wakayama, Yuki A1 - Wakui, Tetsuya T1 - Model Reduction by Time Aggregation for Optimal Design of Energy Supply Systems by an MILP Hierarchical Branch and Bound Method T2 - Proceedings of the 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2018) N2 - Mixed-integer linear programming (MILP) methods have been applied widely to optimal design of energy supply systems. A hierarchical MILP method has been proposed to solve such optimal design problems effi- ciently. An original problem has been solved by dividing it into a relaxed optimal design problem at the upper level and optimal operation problems which are independent of one another at the lower level. In addition, some strategies have been proposed to enhance the computation efficiency furthermore. In this paper, a method of reducing model by time aggregation is proposed as a novel strategy to search design candidates efficiently in the relaxed optimal design problem at the upper level. In addition, the previous strategies are modified in accordance with the novel strategy. This method is realized only by clustering periods and averaging energy demands for clustered periods, while it guarantees to derive the optimal solu- tion. The method can decrease the number of design variables and constraints at the upper level, and thus may decrease the computation time at the upper level. Through a case study on the optimal design of a gas turbine cogeneration system, it is clarified how the model reduction is effective to enhance the computation efficiency in comparison and combination with the modified previous strategies. Y1 - 2018 ER - TY - CHAP A1 - Yokoyama, Ryohei A1 - Shinano, Yuji A1 - Wakayamaa, Yuji A1 - Wakui, Tetsuya T1 - Optimal Design of a Gas Turbine Cogeneration Plant by a Hierarchical Optimization Method With Parallel Computing T2 - ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition N2 - To attain the highest performance of energy supply systems, it is necessary to rationally determine types, capacities, and numbers of equipment in consideration of their operational strategies corresponding to seasonal and hourly variations in energy demands. Mixed-integer linear programming (MILP) approaches have been applied widely to such optimal design problems. The authors have proposed a MILP method utilizing the hierarchical relationship between design and operation variables to solve the optimal design problems of energy supply systems efficiently. In addition, some strategies to enhance the computation efficiency have been adopted: bounding procedures at both the levels and ordering of the optimal operation problems at the lower level. In this paper, as an additional strategy to enhance the computation efficiency, parallel computing is adopted to solve multiple optimal operation problems in parallel at the lower level. In addition, the effectiveness of each and combinations of the strategies adopted previously and newly is investigated. This hierarchical optimization method is applied to an optimal design of a gas turbine cogeneration plant, and its validity and effectiveness are clarified through some case studies. Y1 - 2018 UR - http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=2700845 VL - 3 ER -