TY - JOUR A1 - Seidel, Ronald A1 - Blumer, Michael A1 - Zaslansky, Paul A1 - Knötel, David A1 - Huber, Daniel R. A1 - Weaver, James C. A1 - Fratzl, Peter A1 - Omelon, Sidney A1 - Bertinetti, Luca A1 - Dean, Mason N. T1 - Ultrastructural, material and crystallographic description of endophytic masses – a possible damage response in shark and ray tessellated calcified cartilage JF - Journal of Structural Biology N2 - The cartilaginous endoskeletons of Elasmobranchs (sharks and rays) are reinforced superficially by minute, mineralized tiles, called tesserae. Unlike the bony skeletons of other vertebrates, elasmobranch skeletons have limited healing capability and their tissues’ mechanisms for avoiding damage or managing it when it does occur are largely unknown. Here we describe an aberrant type of mineralized elasmobranch skeletal tissue called endophytic masses (EPMs), which grow into the uncalcified cartilage of the skeleton, but exhibit a strikingly different morphology compared to tesserae and other elasmobranch calcified tissues. We use biological and materials characterization techniques, including computed tomography, electron and light microscopy, x-ray and Raman spectroscopy and histology to characterize the morphology, ultrastructure and chemical composition of tesserae-associated EPMs in different elasmobranch species. EPMs appear to develop between and in intimate association with tesserae, but lack the lines of periodic growth and varying mineral density characteristic of tesserae. EPMs are mineral-dominated (high mineral and low organic content), comprised of birefringent bundles of large monetite or brushite crystals aligned end to end in long strings. Both Unusual skeletal mineralization in elasmobranchs tesserae and EPMs appear to develop in a type-2 collagen-based matrix, but in contrast to tesserae, all chondrocytes embedded or in contact with EPMs are dead and mineralized. The differences outlined between EPMs and tesserae demonstrate them to be distinct tissues. We discuss several possible reasons for EPM development, including tissue reinforcement, repair, and disruptions of mineralization processes, within the context of elasmobranch skeletal biology as well as descriptions of damage responses of other vertebrate mineralized tissues. Y1 - 2017 U6 - https://doi.org/10.1016/j.jsb.2017.03.004 ER - TY - JOUR A1 - Homberg, Ulrike A1 - Baum, Daniel A1 - Prohaska, Steffen A1 - Günster, Jens A1 - Krauß-Schüler, Stefanie T1 - Adapting trabecular structures for 3D printing: an image processing approach based on µCT data JF - Biomedical Physics & Engineering Express N2 - Materials with a trabecular structure notably combine advantages such as lightweight, reasonable strength, and permeability for fluids. This combination of advantages is especially interesting for tissue engineering in trauma surgery and orthopedics. Bone-substituting scaffolds for instance are designed with a trabecular structure in order to allow cell migration for bone ingrowth and vascularization. An emerging and recently very popular technology to produce such complex, porous structures is 3D printing. However, several technological aspects regarding the scaffold architecture, the printable resolution, and the feature size have to be considered when fabricating scaffolds for bone tissue replacement and regeneration. Here, we present a strategy to assess and prepare realistic trabecular structures for 3D printing using image analysis with the aim of preserving the structural elements. We discuss critical conditions of the printing system and present a 3-stage approach to adapt a trabecular structure from $\mu$CT data while incorporating knowledge about the printing system. In the first stage, an image-based extraction of solid and void structures is performed, which results in voxel- and graph-based representations of the extracted structures. These representations not only allow us to quantify geometrical properties such as pore size or strut geometry and length. But, since the graph represents the geometry and the topology of the initial structure, it can be used in the second stage to modify and adjust feature size, volume and sample size in an easy and consistent way. In the final reconstruction stage, the graph is then converted into a voxel representation preserving the topology of the initial structure. This stage generates a model with respect to the printing conditions to ensure a stable and controlled voxel placement during the printing process. Y1 - 2017 U6 - https://doi.org/10.1088/2057-1976/aa7611 VL - 3 IS - 3 PB - IOP Publishing ER - TY - JOUR A1 - Färber, Claudia A1 - Titschack, Jürgen A1 - Schönberg, Christine H. L. A1 - Ehrig, Karsten A1 - Boos, Karin A1 - Baum, Daniel A1 - Illerhaus, Bernd A1 - Asgaard, Ulla A1 - Bromley, Richard G. A1 - Freiwald, André A1 - Wisshak, Max T1 - Long-term macrobioerosion in the Mediterranean Sea assessed by micro-computed tomography JF - Biogeosciences N2 - Biological erosion is a key process for the recycling of carbonate and the formation of calcareous sediments in the oceans. Experimental studies showed that bioerosion is subject to distinct temporal variability, but previous long-term studies were restricted to tropical waters. Here, we present results from a 14-year bioerosion experiment that was carried out along the rocky limestone coast of the island of Rhodes, Greece, in the Eastern Mediterranean Sea, in order to monitor the pace at which bioerosion affects carbonate substrate and the sequence of colonisation by bioeroding organisms. Internal macrobioerosion was visualised and quantified by micro-computed tomography and computer-algorithm-based segmentation procedures. Analysis of internal macrobioerosion traces revealed a dominance of bioeroding sponges producing eight types of characteristic Entobia cavity networks, which were matched to five different clionaid sponges by spicule identification in extracted tissue. The morphology of the entobians strongly varied depending on the species of the producing sponge, its ontogenetic stage, available space, and competition by other bioeroders. An early community developed during the first 5 years of exposure with initially very low macrobioerosion rates and was followed by an intermediate stage when sponges formed large and more diverse entobians and bioerosion rates increased. After 14 years, 30 % of the block volumes were occupied by boring sponges, yielding maximum bioerosion rates of 900 g m^−2 yr^−1. A high spatial variability in macrobioerosion prohibited clear conclusions about the onset of macrobioerosion equilibrium conditions. This highlights the necessity of even longer experimental exposures and higher replication at various factor levels in order to better understand and quantify temporal patterns of macrobioerosion in marine carbonate environments. Y1 - 2016 U6 - https://doi.org/10.5194/bg-13-3461-2016 VL - 13 IS - 11 SP - 3461 EP - 3474 CY - http://www.biogeosciences.net/13/3461/2016/ ER - TY - GEN A1 - Knötel, David A1 - Seidel, Ronald A1 - Hosny, Ahmed A1 - Zaslansky, Paul A1 - Weaver, James C. A1 - Baum, Daniel A1 - Dean, Mason N. T1 - Understanding the Tiling Rules of the Tessellated Mineralized Endoskeleton of Sharks and Rays T2 - Poster, Euro Bio-inspired Materials 2016, Potsdam, Germany, February 22 - 25, 2016 N2 - The endoskeletons of sharks and rays are composed of an unmineralized cartilaginous core, covered in an outer layer of mineralized tiles called tesserae. The tessellated layer is vital to the growth as well as the material properties of the skeletal element, providing both flexibility and strength. However, characterizing the relationship between tesseral size and shape, and skeletal growth and mechanics is challenging because tesserae are small (a few hundred micrometers wide), anchored to the surrounding tissue in complex three-dimensional ways, and occur in huge numbers. Using a custom-made semi-automatic segmentation algorithm, we present the first quantitative and three-dimensional description of tesserae in micro-CT scans of whole skeletal elements. Our segmentation algorithm relies on aspects we have learned of general tesseral morphology. We exploit the distance map of the mineralized layer to separate individual tiles using a hierarchical watershed algorithm. Additionally, we have developed post-processing techniques to quickly correct segmentation errors. Our data reveals that the tessellation is not regular, with tesserae showing a great range of shapes, sizes and number of neighbors. This is partly region-dependent: for example, thick, columnar tesserae are arranged in series along convex edges with small radius of curvature (RoC), whereas more brick-or disc-shaped tesserae are found in planar areas. We apply our newly developed techniques on the left and right hyomandibula (skeletal elements supporting the jaws) from four different ages of a stingray species, to clarify how tiling patterns develop across ontogeny and differ within and between individuals. We evaluate the functional consequences of tesseral morphologies using finite element analysis and 3d-printing, for a better understanding of shark skeletal mechanics, but also to extract fundamental engineering design principles of tiling arrangements on load-bearing three-dimensional objects. Y1 - 2016 ER - TY - JOUR A1 - Knötel, David A1 - Seidel, Ronald A1 - Prohaska, Steffen A1 - Dean, Mason N. A1 - Baum, Daniel T1 - Automated Segmentation of Complex Patterns in Biological Tissues: Lessons from Stingray Tessellated Cartilage JF - PLOS ONE N2 - Introduction – Many biological structures show recurring tiling patterns on one structural level or the other. Current image acquisition techniques are able to resolve those tiling patterns to allow quantitative analyses. The resulting image data, however, may contain an enormous number of elements. This renders manual image analysis infeasible, in particular when statistical analysis is to be conducted, requiring a larger number of image data to be analyzed. As a consequence, the analysis process needs to be automated to a large degree. In this paper, we describe a multi-step image segmentation pipeline for the automated segmentation of the calcified cartilage into individual tesserae from computed tomography images of skeletal elements of stingrays. Methods – Besides applying state-of-the-art algorithms like anisotropic diffusion smoothing, local thresholding for foreground segmentation, distance map calculation, and hierarchical watershed, we exploit a graph-based representation for fast correction of the segmentation. In addition, we propose a new distance map that is computed only in the plane that locally best approximates the calcified cartilage. This distance map drastically improves the separation of individual tesserae. We apply our segmentation pipeline to hyomandibulae from three individuals of the round stingray (Urobatis halleri), varying both in age and size. Results – Each of the hyomandibula datasets contains approximately 3000 tesserae. To evaluate the quality of the automated segmentation, four expert users manually generated ground truth segmentations of small parts of one hyomandibula. These ground truth segmentations allowed us to compare the segmentation quality w.r.t. individual tesserae. Additionally, to investigate the segmentation quality of whole skeletal elements, landmarks were manually placed on all tesserae and their positions were then compared to the segmented tesserae. With the proposed segmentation pipeline, we sped up the processing of a single skeletal element from days or weeks to a few hours. Y1 - 2017 U6 - https://doi.org/10.1371/journal.pone.0188018 ER -