TY - GEN A1 - Orlowski, Sebastian A1 - Wessäly, Roland T1 - An Integer Programming Model for Multi-Layer Network Design N2 - We present an integer linear programming model for the design of multi-layer telecommunication networks. The formulation integrates hardware, capacity, routing, and grooming decisions in \emph{any} n umber of network layers. Practical hardware restrictions and cost can accurately be taken into account for technologies based on connection-oriented routing protocols. T3 - ZIB-Report - 04-49 KW - multi-layer networks KW - integer programming KW - network design KW - routing KW - grooming Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-8248 ER - TY - GEN A1 - Idzikowski, Filip A1 - Orlowski, Sebastian A1 - Raack, Christian A1 - Woesner, Hagen A1 - Wolisz, Adam T1 - Dynamic routing at different layers in IP-over-WDM networks -- Maximizing energy savings N2 - We estimate potential energy savings in IP-over-WDM networks achieved by switching off router line cards in low-demand hours. We compare three approaches to react on dynamics in the IP traffic over time, FUFL, DUFL and DUDL. They provide different levels of freedom in adjusting the routing of lightpaths in the WDM layer and the routing of demands in the IP layer. Using MILP models based on three realistic network topologies as well as realistic demands, power, and cost values, we show that already a simple monitoring of the lightpath utilization in order to deactivate empty line cards (FUFL) brings substantial benefits. The most significant savings, however, are achieved by rerouting traffic in the IP layer (DUFL), which allows emptying and deactivating lightpaths together with the corresponding line cards. A sophisticated reoptimization of the virtual topologies and the routing in the optical domain for every demand scenario (DUDL) yields nearly no additional profits in the considered networks. These results are independent of the ratio between the demand and capacity granularities, the time scale and the network topology, and show little dependency on the demand structure. T3 - ZIB-Report - 10-07 KW - network design KW - energy efficiency KW - power consumption KW - multi-layer KW - multi-hour KW - multi-period Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-11692 SN - 1438-0064 ER - TY - GEN A1 - Hoesel, Stan P.M. van A1 - Koster, Arie M.C.A. A1 - Leensel, Robert L.M.J. van de A1 - Savelsbergh, Martin W.P. T1 - Polyhedral Results for the Edge Capacity Polytope N2 - Network loading problems occur in the design of telecommunication networks, in many different settings. The polyhedral structure of this problem is important in developing solution methods for the problem. In this paper we investigate the polytope of the problem restricted to one edge of the network (the edge capacity problem). We describe classes of strong valid inequalities for the edge capacity polytope, and we derive conditions under which these constraints define facets. As the edge capacity problem is a relaxation of the network loading problem, their polytopes are intimately related. We, therefore, also give conditions under which the inequalities of the edge capacity polytope define facets of the network loading polytope. Furthermore, some structural properties are derived, such as the relation of the edge capacity polytope to the knapsack polytope. We conclude the theoretical part of this paper with some lifting theorems, where we show that this problem is polynomially solvable for most of our classes of valid inequalities. In a computational study the quality of the constraints is investigated. Here, we show that the valid inequalities of the edge capacity polytope are not only important for solving the edge capacity problem, but also for the network loading problem, showing that the edge capacity problem is an important subproblem. T3 - ZIB-Report - 00-22 KW - network design KW - mixed integer programming KW - cutting planes KW - knapsack with integer capacity Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-5907 ER - TY - GEN A1 - Raack, Christian A1 - Koster, Arie M.C.A. A1 - Wessäly, Roland T1 - On the strength of cut-based inequalities for capacitated network design polyhedra N2 - In this paper we study capacitated network design problems, differentiating directed, bidirected and undirected link capacity models. We complement existing polyhedral results for the three variants by new classes of facet-defining valid inequalities and unified lifting results. For this, we study the restriction of the problems to a cut of the network. First, we show that facets of the resulting cutset polyhedra translate into facets of the original network design polyhedra if the two subgraphs defined by the network cut are (strongly) connected. Second, we provide an analysis of the facial structure of cutset polyhedra, elaborating the differences caused by the three different types of capacity constraints. We present flow-cutset inequalities for all three models and show under which conditions these are facet-defining. We also state a new class of facets for the bidirected and undirected case and it is shown how to handle multiple capacity modules by Mixed Integer Rounding (MIR). T3 - ZIB-Report - 07-08 KW - cutset-polyhedra KW - flow-cutset inequalities KW - network design KW - mixed integer programming Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-9512 ER - TY - GEN A1 - Betker, Andreas A1 - Kosiankowski, Dirk A1 - Lange, Christoph A1 - Pfeuffer, Frank A1 - Raack, Christian A1 - Werner, Axel T1 - Energy efficiency in extensive multilayer core and regional networks with protection N2 - Energy-efficient operation of large telecommunication networks is an important issue today and in the near future. Given that the energy consumption rises with the ever increasing demand for capacity and network speed, there is a growing interest in strategies for a sustainable network management. It is a well-known fact that traffic demands vary significantly over time, most notably in day/night- and in weekly cycles. This provides the main potential for energy-saving strategies. We study the question of how much power is necessary to operate a network with state-of-the-art hardware during peak or low-traffic times. The study respects realistic side constraints, such as protection requirements and routing schemes, and takes the special structure of an extensive nation-wide optical network, including backbone and regional sections, into account. We formulate mixed integer programming models for the corresponding optimization problems using predictions for traffic matrices, as well as state-of-the-art hardware and power models. We address questions as the following: How much energy is spent in the core and in metro regions of the network and how big are the savings in low-demand scenarios if we always assume the system power-minimum in these situations? What is the influence of different hardware on the overall energy consumption? How much do different routing schemes or protection scenarios restrict potential energy savings? T3 - ZIB-Report - 12-45 KW - telecommunications KW - network design KW - routing KW - energy efficiency Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-17154 SN - 1438-0064 ER -