TY - GEN A1 - Raack, Christian A1 - Koster, Arie M.C.A. A1 - Wessäly, Roland T1 - On the strength of cut-based inequalities for capacitated network design polyhedra N2 - In this paper we study capacitated network design problems, differentiating directed, bidirected and undirected link capacity models. We complement existing polyhedral results for the three variants by new classes of facet-defining valid inequalities and unified lifting results. For this, we study the restriction of the problems to a cut of the network. First, we show that facets of the resulting cutset polyhedra translate into facets of the original network design polyhedra if the two subgraphs defined by the network cut are (strongly) connected. Second, we provide an analysis of the facial structure of cutset polyhedra, elaborating the differences caused by the three different types of capacity constraints. We present flow-cutset inequalities for all three models and show under which conditions these are facet-defining. We also state a new class of facets for the bidirected and undirected case and it is shown how to handle multiple capacity modules by Mixed Integer Rounding (MIR). T3 - ZIB-Report - 07-08 KW - cutset-polyhedra KW - flow-cutset inequalities KW - network design KW - mixed integer programming Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-9512 ER - TY - GEN A1 - Gruber, Claus G. A1 - Koster, Arie M.C.A. A1 - Orlowski, Sebastian A1 - Wessäly, Roland A1 - Zymolka, Adrian T1 - A new model and a computational study for Demand-wise Shared Protection N2 - This report combines the contributions to INOC 2005 (Wessälly et al., 2005) and DRCN 2005 (Gruber et al., 2005). A new integer linear programming model for the end-to-end survivability concept deman d-wise shared protection (DSP) is presented. DSP is based on the idea that backup capacity is dedicated to a particular demand, but shared within a demand. It combines advantages of dedicated and shared protection: It is more cost-efficient than dedicated protection and operationally easier than shared protection. In a previous model for DSP, the number of working and backup paths to be configured for a particular demand has been an input parameter; in the more general model for DSP investigated in this paper, this value is part of the decisions to take. To use the new DSP model algorithmically, we suggest a branch-and-cut approach which employs a column generation procedure to deal with the exponential number of routing variables. A computational study to compare the new resilience mechanism DSP with dedicated and shared path protection is performed. The results for five realistic network planning scenarios reveal that the best solutions for DSP are on average 15\% percent better than the corresponding 1+1 dedicated path protection solutions, and only 15\% percent worse than shared path protection. T3 - ZIB-Report - 05-55 KW - demand-wise shared protection KW - resilience KW - network design KW - integer linear programming Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-8880 ER - TY - THES A1 - Zymolka, Adrian T1 - Design of Survivable Optical Networks by Mathematical Optimization N2 - Abstract The cost-efficient design of survivable optical telecommunication networks is the topic of this thesis. In cooperation with network operators, we have developed suitable concepts and mathematical optimization methods to solve this comprehensive planning task in practice. Optical technology is more and more employed in modern telecommunication networks. Digital information is thereby transmitted as short light pulses through glass fibers. Moreover, the optical medium allows for simultaneous transmissions on a single fiber by use of different wavelengths. Recent optical switches enable a direct forwarding of optical channels in the network nodes without the previously required signal retransformation to electronics. Their integration creates ongoing optical connections,which are called lightpaths. We study the problem of finding cost-efficient configurations of optical networks which meet specified communication requirements. A configuration comprises the determination of all lightpaths to establish as well as the detailed allocation of all required devices and systems. We use a flexible modeling framework for a realistic representation of the networks and their composition. For different network architectures, we formulate integer linear programs which model the design task in detail. Moreover, network survivability is an important issue due to the immense bandwidths offered by optical technology. Operators therefore request for designs which perpetuate protected connections and guarantee for a defined minimum throughput in case of malfunctions. In order to achieve an effective realization of scalable protection, we present a novel survivability concept tailored to optical networks and integrate several variants into the models. Our solution approach is based on a suitable model decomposition into two subtasks which separates two individually hard subproblems and enables this way to compute cost-efficient designs with approved quality guarantee. The first subtask consists of routing the connections with corresponding dimensioning of capacities and constitutes a common core task in the area of network planning. Sophisticated methods for such problems have already been developed and are deployed by appropriate integration. The second subtask is characteristic for optical networks and seeks for a conflict-free assignment of available wavelengths to the lightpaths using a minimum number of involved wavelength converters. For this coloring-like task, we derive particular models and study methods to estimate the number of unavoidable conversions. As constructive approach, we develop heuristics and an exact branch-and-price algorithm. Finally, we carry out an extensive computational study on realistic data, provided by our industrial partners. As twofold purpose, we demonstrate the potential of our approach for computing good solutions with quality guarantee, and we exemplify its flexibility for application to network design and analysis. KW - network design KW - optical networks KW - integer programming KW - mathematical optimization Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-10408 ER - TY - GEN A1 - Idzikowski, Filip A1 - Orlowski, Sebastian A1 - Raack, Christian A1 - Woesner, Hagen A1 - Wolisz, Adam T1 - Dynamic routing at different layers in IP-over-WDM networks -- Maximizing energy savings N2 - We estimate potential energy savings in IP-over-WDM networks achieved by switching off router line cards in low-demand hours. We compare three approaches to react on dynamics in the IP traffic over time, FUFL, DUFL and DUDL. They provide different levels of freedom in adjusting the routing of lightpaths in the WDM layer and the routing of demands in the IP layer. Using MILP models based on three realistic network topologies as well as realistic demands, power, and cost values, we show that already a simple monitoring of the lightpath utilization in order to deactivate empty line cards (FUFL) brings substantial benefits. The most significant savings, however, are achieved by rerouting traffic in the IP layer (DUFL), which allows emptying and deactivating lightpaths together with the corresponding line cards. A sophisticated reoptimization of the virtual topologies and the routing in the optical domain for every demand scenario (DUDL) yields nearly no additional profits in the considered networks. These results are independent of the ratio between the demand and capacity granularities, the time scale and the network topology, and show little dependency on the demand structure. T3 - ZIB-Report - 10-07 KW - network design KW - energy efficiency KW - power consumption KW - multi-layer KW - multi-hour KW - multi-period Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-11692 SN - 1438-0064 ER - TY - GEN A1 - Poss, Michael A1 - Raack, Christian T1 - Affine recourse for the robust network design problem: between static and dynamic routing N2 - Affinely-Adjustable Robust Counterparts provide tractable alternatives to (two-stage) robust programs with arbitrary recourse. We apply them to robust network design with polyhedral demand uncertainty, introducing the affine routing principle. We compare the affine routing to the well-studied static and dynamic routing schemes for robust network design. All three schemes are embedded into the general framework of two-stage network design with recourse. It is shown that affine routing can be seen as a generalization of the widely used static routing still being tractable and providing cheaper solutions. We investigate properties on the demand polytope under which affine routings reduce to static routings and also develop conditions on the uncertainty set leading to dynamic routings being affine. We show however that affine routings suffer from the drawback that (even totally) dominated demand vectors are not necessarily supported by affine solutions. Uncertainty sets have to be designed accordingly. Finally, we present computational results on networks from SNDlib. We conclude that for these instances the optimal solutions based on affine routings tend to be as cheap as optimal network designs for dynamic routings. In this respect the affine routing principle can be used to approximate the cost for two-stage solutions with free recourse which are hard to compute. T3 - ZIB-Report - 11-03 KW - robust optimization KW - network design KW - recourse KW - affine adjustable robust counterparts KW - affine routing Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-12122 ER - TY - GEN A1 - Betker, Andreas A1 - Kosiankowski, Dirk A1 - Lange, Christoph A1 - Pfeuffer, Frank A1 - Raack, Christian A1 - Werner, Axel T1 - Energy efficiency in extensive multilayer core and regional networks with protection N2 - Energy-efficient operation of large telecommunication networks is an important issue today and in the near future. Given that the energy consumption rises with the ever increasing demand for capacity and network speed, there is a growing interest in strategies for a sustainable network management. It is a well-known fact that traffic demands vary significantly over time, most notably in day/night- and in weekly cycles. This provides the main potential for energy-saving strategies. We study the question of how much power is necessary to operate a network with state-of-the-art hardware during peak or low-traffic times. The study respects realistic side constraints, such as protection requirements and routing schemes, and takes the special structure of an extensive nation-wide optical network, including backbone and regional sections, into account. We formulate mixed integer programming models for the corresponding optimization problems using predictions for traffic matrices, as well as state-of-the-art hardware and power models. We address questions as the following: How much energy is spent in the core and in metro regions of the network and how big are the savings in low-demand scenarios if we always assume the system power-minimum in these situations? What is the influence of different hardware on the overall energy consumption? How much do different routing schemes or protection scenarios restrict potential energy savings? T3 - ZIB-Report - 12-45 KW - telecommunications KW - network design KW - routing KW - energy efficiency Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-17154 SN - 1438-0064 ER -