TY - JOUR A1 - Heller, Markus O. A1 - Matziolis, Georg A1 - König, Christian A1 - Taylor, William R. A1 - Hinterwimmer, S. A1 - Graichen, H. A1 - Hege, Hans-Christian A1 - Bergmann, G. A1 - Perka, Carsten A1 - Duda, G. N. T1 - Muskuloskelettale Biomechanik des Kniegelenks - Grundlagen für die präoperative Planung von Umstellung und Gelenkersatz JF - Der Orthopäde Y1 - 2007 U6 - https://doi.org/10.1007/s00132-007-1115-2 VL - 36 IS - 7 SP - 628 EP - 634 ER - TY - JOUR A1 - Trepczynski, Adam A1 - Kneifel, Paul A1 - Heyland, Mark A1 - Leskovar, Marko A1 - Moewis, Philippe A1 - Damm, Philipp A1 - Taylor, William R. A1 - Zachow, Stefan A1 - Duda, Georg T1 - Impact of the External Knee Flexion Moment on Patello-Femoral Loading Derived from in vivo Loads and Kinematics JF - Frontiers in Bioengineering and Biotechnology N2 - Anterior knee pain and other patello-femoral (PF) complications frequently limit the success of total knee arthroplasty as the final treatment of end stage osteoarthritis. However, knowledge about the invivo loading conditions at the PF joint remains limited, as no direct measurements are available. We hypothesised that the external knee flexion moment (EFM) is highly predictive of the PF contact forces during activities with substantial flexion of the loaded knee.Six patients (65-80 years, 67-101 kg) with total knee arthroplasty (TKA) performed two activities of daily living: sit-stand-sit and squat. Tibio-femoral (TF) contact forces were measured in vivo using instrumented tibial components, while synchronously internal TF and PF kinematics were captured with mobile fluoroscopy. The measurements were used to compute PF contact forces using patient specific musculoskeletal models. The relationship between the EFM and the PF contact force was quantified using linear regression.Mean peak TF contact forces of 1.97 to 3.24 times body weight (BW) were found while peak PF forces reached 1.75 to 3.29 times body weight (BW). The peak EFM ranged from 3.2 to 5.9 %BW times body height, and was a good predictor of the PF contact force (R^2 = 0.95 and 0.88 for sit-standsit and squat, respectively).The novel combination of in vivo TF contact forces and internal patellar kinematics enabled a reliable assessment of PF contact forces. The results of the regression analysis suggest that PF forces can be estimated based solely on the EFM from quantitative gait analysis. Our study also demonstrates the relevance of PF contact forces, which reach magnitudes similar to TF forces during activities of daily living. Y1 - 2024 U6 - https://doi.org/10.3389/fbioe.2024.1473951 VL - 12 ER - TY - JOUR A1 - Trepczynski, Adam A1 - Kneifel, Paul A1 - Heyland, Mark A1 - Leskovar, Marko A1 - Moewis, Philippe A1 - Damm, Philipp A1 - Taylor, William R. A1 - Zachow, Stefan A1 - Duda, Georg N. T1 - Impact of the external knee flexion moment on patello-femoral loading derived from in vivo loads and kinematics JF - Frontiers in Bioengineering and Biotechnology N2 - Introduction: Anterior knee pain and other patello-femoral (PF) complications frequently limit the success of total knee arthroplasty as the final treatment of end stage osteoarthritis. However, knowledge about the in-vivo loading conditions at the PF joint remains limited, as no direct measurements are available. We hypothesised that the external knee flexion moment (EFM) is highly predictive of the PF contact forces during activities with substantial flexion of the loaded knee. Materials and methods: Six patients (65–80 years, 67–101 kg) with total knee arthroplasty (TKA) performed two activities of daily living: sit-stand-sit and squat. Tibio-femoral (TF) contact forces were measured in vivo using instrumented tibial components, while synchronously internal TF and PF kinematics were captured with mobile fluoroscopy. The measurements were used to compute PF contact forces using patient specific musculoskeletal models. The relationship between the EFM and the PF contact force was quantified using linear regression. Results: Mean peak TF contact forces of 1.97–3.24 times body weight (BW) were found while peak PF forces reached 1.75 to 3.29 times body weight (BW). The peak EFM ranged from 3.2 to 5.9 %BW times body height, and was a good predictor of the PF contact force (R2 = 0.95 and 0.88 for sit-stand-sit and squat, respectively). Discussion: The novel combination of in vivo TF contact forces and internal patellar kinematics enabled a reliable assessment of PF contact forces. The results of the regression analysis suggest that PF forces can be estimated based solely on the EFM from quantitative gait analysis. Our study also demonstrates the relevance of PF contact forces, which reach magnitudes similar to TF forces during activities of daily living. Y1 - 2024 U6 - https://doi.org/10.3389/fbioe.2024.1473951 SN - 2296-4185 VL - 12/2024 PB - Frontiers Media SA ER -