TY - GEN A1 - Knötel, David A1 - Seidel, Ronald A1 - Zaslansky, Paul A1 - Prohaska, Steffen A1 - Dean, Mason N. A1 - Baum, Daniel T1 - Automated Segmentation of Complex Patterns in Biological Tissues: Lessons from Stingray Tessellated Cartilage (Supplementary Material) N2 - Supplementary data to reproduce and understand key results from the related publication, including original image data and processed data. In particular, sections from hyomandibulae harvested from specimens of round stingray Urobatis halleri, donated from another study (DOI: 10.1002/etc.2564). Specimens were from sub-adults/adults collected by beach seine from collection sites in San Diego and Seal Beach, California, USA. The hyomandibulae were mounted in clay, sealed in ethanol-humidified plastic tubes and scanned with a Skyscan 1172 desktop μCT scanner (Bruker μCT, Kontich, Belgium) in association with another study (DOI: 10.1111/joa.12508). Scans for all samples were performed with voxel sizes of 4.89 μm at 59 kV source voltage and 167 μA source current, over 360◦ sample 120 rotation. For our segmentations, the datasets were resampled to a voxel size of 9.78 μm to reduce the size of the images and speed up processing. In addition, the processed data that was generated with the visualization software Amira with techniques described in the related publication based on the mentioned specimens. Y1 - 2017 U6 - https://doi.org/10.12752/4.DKN.1.0 N1 - Supplementary data to reproduce and understand key results from the related publication, including original image data and processed data. ER - TY - GEN A1 - Lindow, Norbert A1 - Redemann, Stefanie A1 - Fabig, Gunar A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen T1 - Quantification of Three-Dimensional Spindle Architecture N2 - Mitotic and meiotic spindles are microtubule-based structures to faithfully segregate chromosomes. Electron tomography is currently the method of choice to analyze the three-dimensional architecture of both types of spindles. Over the years, we have developed methods and software for automatic segmentation and stitching of microtubules in serial sections for large-scale reconstructions. Three-dimensional reconstruction of microtubules, however, is only the first step towards biological insight. The second step is the analysis of the structural data to derive measurable spindle properties. Here, we present a comprehensive set of techniques to quantify spindle parameters. These techniques provide quantitative analyses of specific microtubule classes and are applicable to a variety of tomographic reconstructions of spindles from different organisms. T3 - ZIB-Report - 18-07 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-66562 SN - 1438-0064 ER - TY - GEN A1 - Özel, M. Neset A1 - Kulkarni, Abhishek A1 - Hasan, Amr A1 - Brummer, Josephine A1 - Moldenhauer, Marian A1 - Daumann, Ilsa-Maria A1 - Wolfenberg, Heike A1 - Dercksen, Vincent J. A1 - Kiral, F. Ridvan A1 - Weiser, Martin A1 - Prohaska, Steffen A1 - von Kleist, Max A1 - Hiesinger, Peter Robin T1 - Serial synapse formation through filopodial competition for synaptic seeding factors N2 - Following axon pathfinding, growth cones transition from stochastic filopodial exploration to the formation of a limited number of synapses. How the interplay of filopodia and synapse assembly ensures robust connectivity in the brain has remained a challenging problem. Here, we developed a new 4D analysis method for filopodial dynamics and a data-driven computational model of synapse formation for R7 photoreceptor axons in developing Drosophila brains. Our live data support a 'serial synapse formation' model, where at any time point only a single 'synaptogenic' filopodium suppresses the synaptic competence of other filopodia through competition for synaptic seeding factors. Loss of the synaptic seeding factors Syd-1 and Liprin-α leads to a loss of this suppression, filopodial destabilization and reduced synapse formation, which is sufficient to cause the destabilization of entire axon terminals. Our model provides a filopodial 'winner-takes-all' mechanism that ensures the formation of an appropriate number of synapses. T3 - ZIB-Report - 19-45 KW - filopodia KW - growth cone dynamics KW - brain wiring KW - 2-photon microscopy KW - model Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-74397 SN - 1438-0064 ER - TY - GEN A1 - Lindow, Norbert A1 - Brünig, Florian A1 - Dercksen, Vincent J. A1 - Fabig, Gunar A1 - Kiewisz, Robert A1 - Redemann, Stefanie A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen T1 - Semi-automatic Stitching of Serial Section Image Stacks with Filamentous Structures N2 - In this paper, we present a software-assisted workflow for the alignment and matching of filamentous structures across a stack of 3D serial image sections. This is achieved by a combination of automatic methods, visual validation, and interactive correction. After an initial alignment, the user can continuously improve the result by interactively correcting landmarks or matches of filaments. This is supported by a quality assessment that visualizes regions that have been already inspected and, thus, allows a trade-off between quality and manual labor. The software tool was developed in collaboration with biologists who investigate microtubule-based spindles during cell division. To quantitatively understand the structural organization of such spindles, a 3D reconstruction of the numerous microtubules is essential. Each spindle is cut into a series of semi-thick physical sections, of which electron tomograms are acquired. The sections then need to be stitched, i.e. non-rigidly aligned; and the microtubules need to be traced in each section and connected across section boundaries. Experiments led to the conclusion that automatic methods for stitching alone provide only an incomplete solution to practical analysis needs. Automatic methods may fail due to large physical distortions, a low signal-to-noise ratio of the images, or other unexpected experimental difficulties. In such situations, semi-automatic validation and correction is required to rescue as much information as possible to derive biologically meaningful results despite of some errors related to data collection. Since the correct stitching is visually not obvious due to the number of microtubules (up to 30k) and their dense spatial arrangement, these are difficult tasks. Furthermore, a naive inspection of each microtubule is too time consuming. In addition, interactive visualization is hampered by the size of the image data (up to 100 GB). Based on the requirements of our collaborators, we present a practical solution for the semi-automatic stitching of serial section image stacks with filamentous structures. T3 - ZIB-Report - 19-30 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-73739 SN - 1438-0064 ER - TY - GEN A1 - Homberg, Ulrike A1 - Baum, Daniel A1 - Wiebel, Alexander A1 - Prohaska, Steffen A1 - Hege, Hans-Christian ED - Bremer, Peer-Timo ED - Hotz, Ingrid ED - Pascucci, Valerio ED - Peikert, Ronald T1 - Definition, Extraction, and Validation of Pore Structures in Porous Materials BT - Theory, Algorithms, and Applications T2 - Topological Methods in Data Analysis and Visualization III Y1 - 2014 U6 - https://doi.org/10.1007/978-3-319-04099-8_15 SP - 235 EP - 248 PB - Springer ER - TY - CHAP A1 - Klindt, Marco A1 - Prohaska, Steffen A1 - Baum, Daniel A1 - Hege, Hans-Christian ED - Arnold, David ED - Kaminski, Jaime ED - Niccolucci, Franco ED - Stork, Andre T1 - Conveying Archaeological Contexts to Museum Visitors: Case Study Pergamon Exhibition T2 - VAST12: The 13th International Symposium on Virtual Reality, Archaeology and Intelligent Cultural Heritage - Short Papers Y1 - 2012 UR - http://diglib.eg.org/EG/DL/PE/VAST/VAST12S/025-028.pdf U6 - https://doi.org/10.2312/PE/VAST/VAST12S/025-028 SP - 25 EP - 28 PB - Eurographics Association CY - Brighton, UK ER - TY - CHAP A1 - Klindt, Marco A1 - Baum, Daniel A1 - Prohaska, Steffen A1 - Hege, Hans-Christian T1 - iCon.text – a customizable iPad app for kiosk applications in museum exhibitions T2 - EVA 2012 Berlin Y1 - 2012 SP - 150 EP - 155 PB - Gesellschaft zur Förderung angewandter Informatik e.V. CY - Volmerstraße 3, 12489 Berlin ER - TY - JOUR A1 - Kleinfeld, David A1 - Bharioke, Arjun A1 - Blinder, Pablo A1 - Bock, David A1 - Briggman, Kevin A1 - Chklovskii, Dmitri A1 - Denk, Winfried A1 - Helmstaedter, Moritz A1 - Kaufhold, John A1 - Lee, Wei-Chung A1 - Meyer, Hanno A1 - Micheva, Kristina A1 - Oberlaender, Marcel A1 - Prohaska, Steffen A1 - Reid, R. A1 - Smith, Stephen A1 - Takemura, Shinya A1 - Tsai, Philbert A1 - Sakmann, Bert T1 - Large-scale automated histology in the pursuit of connectomes JF - Journal of Neuroscience Y1 - 2011 UR - http://www.zib.de/prohaska/docs/Kleinfeld_JNS_Connectomes_2011.pdf U6 - https://doi.org/10.1523/JNEUROSCI.4077-11.2011 VL - 31 IS - 45 SP - 16125 EP - 16138 ER - TY - JOUR A1 - Rigort, Alexander A1 - Günther, David A1 - Hegerl, Reiner A1 - Baum, Daniel A1 - Weber, Britta A1 - Prohaska, Steffen A1 - Medalia, Ohad A1 - Baumeister, Wolfgang A1 - Hege, Hans-Christian T1 - Automated segmentation of electron tomograms for a quantitative description of actin filament networks JF - Journal of Structural Biology Y1 - 2012 U6 - https://doi.org/10.1016/j.jsb.2011.08.012 VL - 177 SP - 135 EP - 144 ER - TY - CHAP A1 - Homberg, Ulrike A1 - Baum, Daniel A1 - Prohaska, Steffen A1 - Kalbe, Ute A1 - Witt, Karl Josef T1 - Automatic Extraction and Analysis of Realistic Pore Structures from µCT Data for Pore Space Characterization of Graded Soil T2 - Proceedings of the 6th International Conference on Scour and Erosion (ICSE-6) Y1 - 2012 SP - 345 EP - 352 ER -