TY - JOUR A1 - Schaible, Jonas A1 - Nouri, Bijan A1 - Höpken, Lars A1 - Kotzab, Tim A1 - Loevenich, Matthias A1 - Blum, Niklas A1 - Hammer, Annette A1 - Stührenberg, Jonas A1 - Jäger, Klaus A1 - Becker, Christiane A1 - Wilbert, Stefan T1 - Application of nowcasting to reduce the impact of irradiance ramps on PV power plants JF - EPJ Photovolt. Y1 - 2024 U6 - https://doi.org/10.1051/epjpv/2024009 VL - 15 SP - 15 ER - TY - CHAP A1 - Schaible, Jonas A1 - Yoo, Danbi A1 - Winarto, Hanifa A1 - Miaskiewicz, Alexandra A1 - Albrecht, Steve A1 - Wessels, Andreas A1 - Bläsi, Benedikt A1 - Burger, Sven A1 - Jaeger, Klaus A1 - Becker, Christiane T1 - On aesthetical appearance of colored perovskite solar modules T2 - Proc. SPIE Y1 - 2024 U6 - https://doi.org/10.1117/12.3017427 VL - PC13014 SP - PC1301406 PB - SPIE ER - TY - JOUR A1 - Schaible, Jonas A1 - Winarto, Hanifah A1 - Škorjanc, Viktor A1 - Yoo, Danbi A1 - Zimmermann, Lea A1 - Jäger, Klaus A1 - Sekulic, Ivan A1 - Schneider, Philipp‐Immanuel A1 - Burger, Sven A1 - Wessels, Andreas A1 - Bläsi, Benedikt A1 - Becker, Christiane T1 - Optimizing Aesthetic Appearance of Perovskite Solar Cells Using Color Filters JF - Solar RRL N2 - The significance of color aesthetics in photovoltaic (PV) modules gains importance, especially in design‐centric applications like building‐integrated PVs. Color filters based on distributed Bragg reflectors, consisting of alternating thin‐film layers of different refractive indices, can modify the appearance of standard silicon modules. This approach is also extended to optimize the color appearance of emerging PV technologies such as perovskite solar cells, which typically exhibit a less appealing gray–brownish appearance. In this contribution, perovskite solar‐cell stacks combined with MorphoColor color filters are presented. Angular‐resolved reflectance simulations based on wave optics and ray tracing with experimental data are validated, and the color appearance from various viewing angles is evaluated. Additionally, the impact of individual layers on color appearance and the maximum achievable short‐circuit current density in the perovskite solar cell is investigated. By applying Bayesian optimization, the color distance is minimized to the targeted appearance. Tailoring the bridging layers between the color filter and the perovskite solar cell is found to strongly influence the color impression due to the coherently combined color filter and perovskite solar cell. The presented color optimization concept allows to customize the aesthetics of emerging PV thin‐film technologies such as perovskite solar cells. Y1 - 2025 U6 - https://doi.org/10.1002/solr.202400627 VL - 9 SP - 2400627 PB - Wiley ER - TY - CHAP A1 - Schaible, Jonas A1 - Winarto, Hanifah A1 - Skorjanc, Victor A1 - Yoo, Danbi A1 - Zimmermann, Lea A1 - Wessels, Andreas A1 - Jäger, Klaus A1 - Sekulic, Ivan A1 - Schneider, Philipp-Immanuel A1 - Bläsi, Benedikt A1 - Burger, Sven A1 - Becker, Christiane T1 - Optimization strategies for colorful thin film solar cells T2 - Proc. SPIE Y1 - 2025 U6 - https://doi.org/10.1117/12.3041408 VL - PC13361 SP - PC133610E ER -