TY - GEN A1 - Özel, M. Neset A1 - Kulkarni, Abhishek A1 - Hasan, Amr A1 - Brummer, Josephine A1 - Moldenhauer, Marian A1 - Daumann, Ilsa-Maria A1 - Wolfenberg, Heike A1 - Dercksen, Vincent J. A1 - Kiral, F. Ridvan A1 - Weiser, Martin A1 - Prohaska, Steffen A1 - von Kleist, Max A1 - Hiesinger, Peter Robin T1 - Serial synapse formation through filopodial competition for synaptic seeding factors N2 - Following axon pathfinding, growth cones transition from stochastic filopodial exploration to the formation of a limited number of synapses. How the interplay of filopodia and synapse assembly ensures robust connectivity in the brain has remained a challenging problem. Here, we developed a new 4D analysis method for filopodial dynamics and a data-driven computational model of synapse formation for R7 photoreceptor axons in developing Drosophila brains. Our live data support a 'serial synapse formation' model, where at any time point only a single 'synaptogenic' filopodium suppresses the synaptic competence of other filopodia through competition for synaptic seeding factors. Loss of the synaptic seeding factors Syd-1 and Liprin-α leads to a loss of this suppression, filopodial destabilization and reduced synapse formation, which is sufficient to cause the destabilization of entire axon terminals. Our model provides a filopodial 'winner-takes-all' mechanism that ensures the formation of an appropriate number of synapses. T3 - ZIB-Report - 19-45 KW - filopodia KW - growth cone dynamics KW - brain wiring KW - 2-photon microscopy KW - model Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-74397 SN - 1438-0064 ER - TY - CHAP A1 - Zachow, Stefan A1 - Weiser, Martin A1 - Hege, Hans-Christian A1 - Deuflhard, Peter ED - Payan, Y. T1 - Soft Tissue Prediction in Computer Assisted Maxillofacial Surgery Planning T2 - Biomechanics Applied to Computer Assisted Surgery Y1 - 2005 SP - 277 EP - 298 PB - Research Signpost ER - TY - CHAP A1 - Zachow, Stefan A1 - Weiser, Martin A1 - Deuflhard, Peter ED - Niederlag, Wolfgang ED - Lemke, Heinz ED - Meixensberger, Jürgen ED - Baumann, Michael T1 - Modellgestützte Operationsplanung in der Kopfchirurgie T2 - Modellgestützte Therapie Y1 - 2008 SP - 140 EP - 156 PB - Health Academy ER - TY - GEN A1 - Wust, Peter A1 - Weihrauch, Mirko A1 - Weiser, Martin A1 - Gellermann, Johanna A1 - Eisenhardt, Steffen A1 - Chobrok, Thorsten A1 - Budach, Volker ED - Dössel, O. ED - Schlegel, W. ED - Magjarevic, R. T1 - Optimization of clinical radiofrequency hyperthermia by use of MR-thermography in a hybrid system T2 - World Congress on Medical Physics and Biomedical Engineering, September 2009, Munich, Germany Y1 - 2010 SP - 174 EP - 175 PB - Springer ER - TY - JOUR A1 - Wilhelms, Mathias A1 - Seemann, Gunnar A1 - Weiser, Martin A1 - Dössel, Olaf T1 - Benchmarking Solvers of the Monodomain Equation in Cardiac Electrophysiological Modeling JF - Biomed. Engineer. Y1 - 2010 U6 - https://doi.org/10.1515/BMT.2010.712 VL - 55 SP - 99 EP - 102 ER - TY - JOUR A1 - Weiser, Martin A1 - Zachow, Stefan A1 - Deuflhard, Peter T1 - Craniofacial Surgery Planning Based on Virtual Patient Models JF - it - Information Technology Y1 - 2010 U6 - https://doi.org/10.1524/itit.2010.0600 VL - 52 IS - 5 SP - 258 EP - 263 PB - Oldenbourg Verlagsgruppe ER - TY - GEN A1 - Weiser, Martin A1 - Schiela, Anton A1 - Deuflhard, Peter T1 - Asymptotic Mesh Independence of Newton's Method Revisited N2 - The paper presents a new affine invariant theory on asymptotic mesh independence of Newton's method in nonlinear PDEs. Compared to earlier attempts, the new approach is both much simpler and more natural from the algorithmic point of view. The theory is exemplified at collocation methods for ODE boundary value problems and at finite element methods for elliptic PDE problems. T3 - ZIB-Report - 03-13 KW - mesh independence KW - nonlinear partial differential equations KW - Newton method KW - finite element method KW - collocation method Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-7352 ER - TY - JOUR A1 - Weiser, Martin A1 - Schiela, Anton A1 - Deuflhard, Peter T1 - Asymptotic Mesh Independence of Newton’s Method Revisited JF - SIAM J. Num. Anal. Y1 - 2005 VL - 42 IS - 5 SP - 1830 EP - 1845 ER - TY - GEN A1 - Weiser, Martin A1 - Schiela, Anton T1 - Function space interior point methods for PDE constrained optimization N2 - A primal-dual interior point method for optimal control problems with PDE constraints is considered. The algorithm is directly applied to the infinite dimensional problem. Existence and convergence of the central path are analyzed. Numerical results from an inexact continuation method applied to a model problem are shown. T3 - ZIB-Report - 04-27 KW - interior point methods in function space KW - optimal control KW - complementarity functions Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-8027 ER - TY - JOUR A1 - Weiser, Martin A1 - Schiela, Anton T1 - Function space interior point methods for PDE constrained optimization JF - PAMM Y1 - 2004 VL - 4 IS - 1 SP - 43 EP - 46 ER - TY - GEN A1 - Weiser, Martin A1 - Scacchi, Simone T1 - Spectral Deferred Correction methods for adaptive electro-mechanical coupling in cardiac simulation N2 - We investigate spectral deferred correction (SDC) methods for time stepping and their interplay with spatio-temporal adaptivity, applied to the solution of the cardiac electro-mechanical coupling model. This model consists of the Monodomain equations, a reaction-diffusion system modeling the cardiac bioelectrical activity, coupled with a quasi-static mechanical model describing the contraction and relaxation of the cardiac muscle. The numerical approximation of the cardiac electro-mechanical coupling is a challenging multiphysics problem, because it exhibits very different spatial and temporal scales. Therefore, spatio-temporal adaptivity is a promising approach to reduce the computational complexity. SDC methods are simple iterative methods for solving collocation systems. We exploit their flexibility for combining them in various ways with spatio-temporal adaptivity. The accuracy and computational complexity of the resulting methods are studied on some numerical examples. T3 - ZIB-Report - 14-22 Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-50695 SN - 1438-0064 ER - TY - CHAP A1 - Weiser, Martin A1 - Scacchi, Simone T1 - Spectral Deferred Correction methods for adaptive electro-mechanical coupling in cardiac simulation T2 - G. Russo et al.(eds.) Progress in Industrial Mathematics at ECMI 2014 N2 - We investigate spectral deferred correction (SDC) methods for time stepping and their interplay with spatio-temporal adaptivity, applied to the solution of the cardiac electro-mechanical coupling model. This model consists of the Monodomain equations, a reaction-diffusion system modeling the cardiac bioelectrical activity, coupled with a quasi-static mechanical model describing the contraction and relaxation of the cardiac muscle. The numerical approximation of the cardiac electro-mechanical coupling is a challenging multiphysics problem, because it exhibits very different spatial and temporal scales. Therefore, spatio-temporal adaptivity is a promising approach to reduce the computational complexity. SDC methods are simple iterative methods for solving collocation systems. We exploit their flexibility for combining them in various ways with spatio-temporal adaptivity. The accuracy and computational complexity of the resulting methods are studied on some numerical examples. Y1 - 2017 U6 - https://doi.org/10.1007/978-3-319-23413-7_42 SP - 321 EP - 328 PB - Springer ER - TY - GEN A1 - Weiser, Martin A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Erdmann, Bodo T1 - Development and test of a numerical model for pulse thermography in civil engineering N2 - Pulse thermography of concrete structures is used in civil engineering for detecting voids, honeycombing and delamination. The physical situation is readily modeled by Fourier's law. Despite the simplicity of the PDE structure, quantitatively realistic numerical 3D simulation faces two major obstacles. First, the short heating pulse induces a thin boundary layer at the heated surface which encapsulates all information and therefore has to be resolved faithfully. Even with adaptive mesh refinement techniques, obtaining useful accuracies requires an unsatisfactorily fine discretization. Second, bulk material parameters and boundary conditions are barely known exactly. We address both issues by a semi-analytic reformulation of the heat transport problem and by parameter identification. Numerical results are compared with measurements of test specimens. T3 - ZIB-Report - 08-45 KW - finite element model KW - KARDOS KW - pulse thermography KW - civil engineering KW - inverse solution Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-10980 SN - 1438-0064 ER - TY - JOUR A1 - Weiser, Martin A1 - Röllig, Mathias A1 - Arndt, Ralf A1 - Erdmann, Bodo T1 - Development and test of a numerical model for pulse thermography in civil engineering JF - Heat and Mass Transfer N2 - Pulse thermography of concrete structures is used in civil engineering for detecting voids, honeycombing and delamination. The physical situation is readily modeled by Fourier's law. Despite the simplicity of the PDE structure, quantitatively realistic numerical 3D simulation faces two major obstacles. First, the short heating pulse induces a thin boundary layer at the heated surface which encapsulates all information and therefore has to be resolved faithfully. Even with adaptive mesh refinement techniques, obtaining useful accuracies requires an unsatisfactorily fine discretization. Second, bulk material parameters and boundary conditions are barely known exactly. We address both issues by a semi-analytic reformulation of the heat transport problem and by parameter identification. Numerical results are compared with measurements of test specimens. Y1 - 2010 VL - 46 IS - 11-12 SP - 1419 EP - 1428 ER - TY - GEN A1 - Weiser, Martin A1 - Götschel, Sebastian T1 - State Trajectory Compression for Optimal Control with Parabolic PDEs N2 - In optimal control problems with nonlinear time-dependent 3D PDEs, full 4D discretizations are usually prohibitive due to the storage requirement. For this reason gradient and quasi-Newton methods working on the reduced functional are often employed. The computation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. The state enters into the adjoint equation, again requiring the storage of a full 4D data set. We propose a lossy compression algorithm using an inexact but cheap predictor for the state data, with additional entropy coding of prediction errors. As the data is used inside a discretized, iterative algorithm, lossy coding maintaining an error bound is sufficient. T3 - ZIB-Report - 10-05 KW - optimal control KW - adjoint gradient computation KW - trajectory storage Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-11676 SN - 1438-0064 ER - TY - JOUR A1 - Weiser, Martin A1 - Götschel, Sebastian T1 - State Trajectory Compression for Optimal Control with Parabolic PDEs JF - SIAM J. Sci. Comput. N2 - In optimal control problems with nonlinear time-dependent 3D PDEs, full 4D discretizations are usually prohibitive due to the storage requirement. For this reason gradient and quasi-Newton methods working on the reduced functional are often employed. The computation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. The state enters into the adjoint equation, again requiring the storage of a full 4D data set. We propose a lossy compression algorithm using an inexact but cheap predictor for the state data, with additional entropy coding of prediction errors. As the data is used inside a discretized, iterative algorithm, lossy coding maintaining an error bound is sufficient. Y1 - 2012 U6 - https://doi.org/10.1137/11082172X VL - 34 IS - 1 SP - A161 EP - A184 ER - TY - GEN A1 - Weiser, Martin A1 - Gänzler, Tobias A1 - Schiela, Anton T1 - A Control Reduced Primal Interior Point Method for PDE Constrained Optimization N2 - A primal interior point method for control constrained optimal control problems with PDE constraints is considered. Pointwise elimination of the control leads to a homotopy in the remaining state and dual variables, which is addressed by a short step pathfollowing method. The algorithm is applied to the continuous, infinite dimensional problem, where discretization is performed only in the innermost loop when solving linear equations. The a priori elimination of the least regular control permits to obtain the required accuracy with comparable coarse meshes. Convergence of the method and discretization errors are studied, and the method is illustrated at two numerical examples. T3 - ZIB-Report - 04-38 KW - interior point methods in function space KW - optimal control KW - finite elements KW - discretization error Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-8138 ER - TY - JOUR A1 - Weiser, Martin A1 - Gänzler, Tobias A1 - Schiela, Anton T1 - A control reduced primal interior point method for a class of control constrained optimal control problems JF - Comput. Optim. Appl. Y1 - 2007 VL - 41 IS - 1 SP - 127 EP - 145 ER - TY - JOUR A1 - Weiser, Martin A1 - Ghosh, Sunayana T1 - Theoretically optimal inexact SDC methods JF - Communications in Applied Mathematics and Computational Science N2 - In several inital value problems with particularly expensive right hand side evaluation or implicit step computation, there is a trade-off between accuracy and computational effort. We consider inexact spectral deferred correction (SDC) methods for solving such initial value problems. SDC methods are interpreted as fixed point iterations and, due to their corrective iterative nature, allow to exploit the accuracy-work-tradeoff for a reduction of the total computational effort. On one hand we derive error models bounding the total error in terms of the evaluation errors. On the other hand, we define work models describing the computational effort in terms of the evaluation accuracy. Combining both, a theoretically optimal local tolerance selection is worked out by minimizing the total work subject to achieving the requested tolerance. The properties of optimal local tolerances and the predicted efficiency gain compared to simpler heuristics, and a reasonable practical performance, are illustrated on simple numerical examples. Y1 - 2018 U6 - https://doi.org/10.2140/camcos.2018.13.53 IS - 13-1 SP - 53 EP - 86 ER - TY - GEN A1 - Weiser, Martin A1 - Ghosh, Sunayana T1 - Theoretically optimal inexact SDC methods N2 - In several inital value problems with particularly expensive right hand side computation, there is a trade-off between accuracy and computational effort in evaluating the right hand sides. We consider inexact spectral deferred correction (SDC) methods for solving such non-stiff initial value problems. SDC methods are interpreted as fixed point iterations and, due to their corrective iterative nature, allow to exploit the accuracy-work-tradeoff for a reduction of the total computational effort. On one hand we derive an error model bounding the total error in terms of the right hand side evaluation errors. On the other hand, we define work models describing the computational effort in terms of the evaluation accuracy. Combining both, a theoretically optimal tolerance selection is worked out by minimizing the total work subject to achieving the requested tolerance. T3 - ZIB-Report - 16-52 KW - Spectral deferred correction, initial value problems, error propagation, adaptive control of tolerances Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-53140 SN - 1438-0064 ER - TY - GEN A1 - Weiser, Martin A1 - Freytag, Yvonne A1 - Erdmann, Bodo A1 - Hubig, Michael A1 - Mall, Gita T1 - Optimal Design of Experiments for Estimating the Time of Death in Forensic Medicine N2 - Estimation of time of death based on a single measurement of body core temperature is a standard procedure in forensic medicine. Mechanistic models using simulation of heat transport promise higher accuracy than established phenomenological models in particular in nonstandard situations, but involve many not exactly known physical parameters. Identifying both time of death and physical parameters from multiple temperature measurements is one possibility to reduce the uncertainty significantly. In this paper, we consider the inverse problem in a Bayesian setting and perform both local and sampling-based uncertainty quantification, where proper orthogonal decomposition is used as model reduction for fast solution of the forward model. Based on the local uncertainty quantification, optimal design of experiments is performed in order to minimize the uncertainty in the time of death estimate for a given number of measurements. For reasons of practicability, temperature acquisition points are selected from a set of candidates in different spatial and temporal locations. Applied to a real corpse model, a significant accuracy improvement is obtained already with a small number of measurements. T3 - ZIB-Report - 18-08 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-67247 SN - 1438-0064 ER - TY - JOUR A1 - Weiser, Martin A1 - Freytag, Yvonne A1 - Erdmann, Bodo A1 - Hubig, Michael A1 - Mall, Gita T1 - Optimal Design of Experiments for Estimating the Time of Death in Forensic Medicine JF - Inverse Problems N2 - Estimation of time of death based on a single measurement of body core temperature is a standard procedure in forensic medicine. Mechanistic models using simulation of heat transport promise higher accuracy than established phenomenological models in particular in nonstandard situations, but involve many not exactly known physical parameters. Identifying both time of death and physical parameters from multiple temperature measurements is one possibility to reduce the uncertainty significantly. In this paper, we consider the inverse problem in a Bayesian setting and perform both local and sampling-based uncertainty quantification, where proper orthogonal decomposition is used as model reduction for fast solution of the forward model. Based on the local uncertainty quantification, optimal design of experiments is performed in order to minimize the uncertainty in the time of death estimate for a given number of measurements. For reasons of practicability, temperature acquisition points are selected from a set of candidates in different spatial and temporal locations. Applied to a real corpse model, a significant accuracy improvement is obtained already with a small number of measurements. Y1 - 2018 U6 - https://doi.org/10.1088/1361-6420/aae7a5 VL - 34 IS - 12 SP - 125005 ER - TY - GEN A1 - Weiser, Martin A1 - Erdmann, Bodo A1 - Schenkl, Sebastian A1 - Muggenthaler, Holger A1 - Hubig, Michael A1 - Mall, Gita A1 - Zachow, Stefan T1 - Uncertainty in Temperature-Based Determination of Time of Death N2 - Temperature-based estimation of time of death (ToD) can be per- formed either with the help of simple phenomenological models of corpse cooling or with detailed mechanistic (thermodynamic) heat transfer mod- els. The latter are much more complex, but allow a higher accuracy of ToD estimation as in principle all relevant cooling mechanisms can be taken into account. The potentially higher accuracy depends on the accuracy of tissue and environmental parameters as well as on the geometric resolution. We in- vestigate the impact of parameter variations and geometry representation on the estimated ToD based on a highly detailed 3D corpse model, that has been segmented and geometrically reconstructed from a computed to- mography (CT) data set, differentiating various organs and tissue types. From that we identify the most crucial parameters to measure or estimate, and obtain a local uncertainty quantifcation for the ToD. T3 - ZIB-Report - 17-18 KW - forensic medicine KW - determination of time of death KW - heat transfer equation KW - sensitivity i.r.t. thermal parameters KW - sensitivity i.r.t. geometric resolution Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-63818 SN - 1438-0064 ER - TY - JOUR A1 - Weiser, Martin A1 - Erdmann, Bodo A1 - Schenkl, Sebastian A1 - Muggenthaler, Holger A1 - Hubig, Michael A1 - Mall, Gita A1 - Zachow, Stefan T1 - Uncertainty in Temperature-Based Determination of Time of Death JF - Heat and Mass Transfer N2 - Temperature-based estimation of time of death (ToD) can be per- formed either with the help of simple phenomenological models of corpse cooling or with detailed mechanistic (thermodynamic) heat transfer mod- els. The latter are much more complex, but allow a higher accuracy of ToD estimation as in principle all relevant cooling mechanisms can be taken into account. The potentially higher accuracy depends on the accuracy of tissue and environmental parameters as well as on the geometric resolution. We in- vestigate the impact of parameter variations and geometry representation on the estimated ToD based on a highly detailed 3D corpse model, that has been segmented and geometrically reconstructed from a computed to- mography (CT) data set, differentiating various organs and tissue types. Y1 - 2018 U6 - https://doi.org/10.1007/s00231-018-2324-4 VL - 54 IS - 9 SP - 2815 EP - 2826 PB - Springer ER - TY - GEN A1 - Weiser, Martin A1 - Erdmann, Bodo A1 - Deuflhard, Peter T1 - On Efficiency and Accuracy in Cardioelectric Simulation N2 - Reasons for the failure of adaptive methods to deliver improved efficiency when integrating monodomain models for myocardiac excitation are discussed. Two closely related techniques for reducing the computational complexity of linearly implicit integrators, deliberate sparsing and splitting, are investigated with respect to their impact on computing time and accuracy. T3 - ZIB-Report - 08-41 KW - elektrische Herzanregung KW - Diskretisierungsfehler KW - splitting KW - mass lumping KW - cardioelectric excitation KW - discretization error KW - splitting KW - mass lumping Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-10934 SN - 1438-0064 ER - TY - GEN A1 - Weiser, Martin A1 - Erdmann, Bodo A1 - Deuflhard, Peter ED - Wilson, E. ED - Fitt, A. ED - Ockendon, H. ED - Norbury, J. T1 - On Efficiency and Accuracy in Cardioelectric Simulation T2 - Progress in Industrial Mathematics at ECMI 2008 N2 - Reasons for the failure of adaptive methods to deliver improved efficiency when integrating monodomain models for myocardiac excitation are discussed. Two closely related techniques for reducing the computational complexity of linearly implicit integrators, deliberate sparsing and splitting, are investigated with respect to their impact on computing time and accuracy. Y1 - 2010 SP - 371 EP - 376 PB - Springer ER - TY - GEN A1 - Weiser, Martin A1 - Deuflhard, Peter A1 - Erdmann, Bodo T1 - Affine conjugate adaptive Newton methods for nonlinear elastomechanics N2 - The paper extends affine conjugate Newton methods from convex to nonconvex minimization, with particular emphasis on PDE problems originating from compressible hyperelasticity. Based on well-known schemes from finite dimensional nonlinear optimization, three different algorithmic variants are worked out in a function space setting, which permits an adaptive multilevel finite element implementation. These algorithms are tested on two well-known 3D test problems and a real-life example from surgical operation planning. T3 - ZIB-Report - 04-01 KW - affine conjugate Newton methods KW - nonconvex minimization KW - nonlinear elastomechnics KW - cranio-maxillofacial surgery KW - soft tissue simulation KW - multilev Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-7768 ER - TY - JOUR A1 - Weiser, Martin A1 - Deuflhard, Peter A1 - Erdmann, Bodo T1 - Affine conjugate adaptive Newton methods for nonlinear elastomechanics JF - Opt. Meth. Softw. Y1 - 2007 VL - 22 IS - 3 SP - 413 EP - 431 ER - TY - GEN A1 - Weiser, Martin A1 - Deuflhard, Peter T1 - The Central Path towards the Numerical Solution of Optimal Control Problems N2 - A new approach to the numerical solution of optimal control problems including control and state constraints is presented. Like hybrid methods, the approach aims at combining the advantages of direct and indirect methods. Unlike hybrid methods, however, our method is directly based on interior-point concepts in function space --- realized via an adaptive multilevel scheme applied to the complementarity formulation and numerical continuation along the central path. Existence of the central path and its continuation towards the solution point is analyzed in some theoretical detail. An adaptive stepsize control with respect to the duality gap parameter is worked out in the framework of affine invariant inexact Newton methods. Finally, the performance of a first version of our new type of algorithm is documented by the successful treatment of the well-known intricate windshear problem. T3 - ZIB-Report - 01-12 KW - optimal control KW - interior point methods KW - affine invariance Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-6380 ER - TY - JOUR A1 - Weiser, Martin A1 - Deuflhard, Peter T1 - Inexact central path following algorithms for optimal control problems JF - SIAM J. Control Opt. Y1 - 2007 VL - 46 IS - 3 SP - 792 EP - 815 ER - TY - CHAP A1 - Weiser, Martin A1 - Chegini, Fatemeh T1 - Adaptive multirate integration of cardiac electrophysiology with spectral deferred correction methods T2 - CMBE22 - 7th International Conference on Computational & Mathematical Biomedical Engineering N2 - The highly localized dynamics of cardiac electrophysiology models call for adaptive simulation methods. Unfortunately, the overhead incurred by classical mesh adaptivity turns out to outweigh the performance improvements achieved by reducing the problem size. Here, we explore a different approach to adaptivity based on algebraic degree of freedom subset selection during spectral deferred correction sweeps, which realizes a kind of multirate higher order integration. Numerical experience indicates a significant performance increase compared to uniform simulations. Y1 - 2022 SP - 528 EP - 531 ER - TY - GEN A1 - Weiser, Martin A1 - Chegini, Fatemeh T1 - Higher-order time integration using spectral deferred correction method (SDC) in a cell by cell discretization of cardiac excitation N2 - This C++ code implements a cell-by-cell model of cardiac excitation using a piecewise-continuous finite element discretization and spectral deferred correction time stepping. The code is based on the Kaskade 7 finite element toolbox and forms a prototype for the µCarp code to be implemented in the Microcard project. Y1 - 2022 U6 - https://doi.org/10.35097/716 ER - TY - GEN A1 - Weiser, Martin T1 - Linear convergence of an interior point method for linear control constrained optimal control problems N2 - The paper provides a detailed analysis of a short step interior point algorithm applied to linear control constrained optimal control problems. Using an affine invariant local norm and an inexact Newton corrector, the well-known convergence results from finite dimensional linear programming can be extended to the infinite dimensional setting of optimal control. The present work complements a recent paper of Weiser and Deuflhard, where convergence rates have not been derived. The choice of free parameters, i.e. the corrector accuracy and the number of corrector steps, is discussed. T3 - ZIB-Report - 02-13 KW - linear optimal control KW - infinite dimensional KW - interior point methods KW - inexact Newton methods Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-6809 ER - TY - GEN A1 - Weiser, Martin T1 - Interior Point Methods in Function Space N2 - A primal-dual interior point method for optimal control problems is considered. The algorithm is directly applied to the infinite dimensional problem. Existence and convergence of the central path are analyzed, and linear convergence of a short step pathfollowing method is established. T3 - ZIB-Report - 03-35 KW - interior point methods in function space KW - optimal control KW - complementarity functions Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-7578 ER - TY - GEN A1 - Weiser, Martin T1 - On goal-oriented adaptivity for elliptic optimal control problems N2 - The paper proposes goal-oriented error estimation and mesh refinement for optimal control problems with elliptic PDE constraints using the value of the reduced cost functional as quantity of interest. Error representation, hierarchical error estimators, and greedy-style error indicators are derived and compared to their counterparts when using the all-at-once cost functional as quantity of interest. Finally, the efficiency of the error estimator and generated meshes are demonstrated on numerical examples. T3 - ZIB-Report - 09-08 KW - optimal control KW - error estimation KW - adaptive mesh refinement Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-11192 SN - 1438-0064 ER - TY - GEN A1 - Weiser, Martin T1 - Optimization and Identification in Regional Hyperthermia N2 - Regional hyperthermia is a cancer therapy aiming at heating tumors using phased array applicators. This article provides an overview over current mathematical challenges of delivering individually optimal treatments. The focus is on therapy planning and identification of technical as well as physiological quantities from MR thermometry measurements. T3 - ZIB-Report - 08-40 KW - Hyperthermie-Therapieplanung KW - Identifizierung KW - MR-Thermometrie KW - Innere-Punkte-Methoden KW - hyperthermia treatment planning KW - identification KW - MR thermometry KW - interior point methods Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-10916 SN - 1438-0064 ER - TY - GEN A1 - Weiser, Martin T1 - Pointwise Nonlinear Scaling for Reaction-Diffusion-Equations N2 - Parabolic reaction-diffusion systems may develop sharp moving reaction fronts which pose a challenge even for adaptive finite element methods. We propose a method to transform the equation into an equivalent form that usually exhibits solutions which are easier to discretize, giving higher accuracy for a given number of degrees of freedom. The transformation is realized as an efficiently computable pointwise nonlinear scaling that is optimized for prototypical planar travelling wave solutions of the underlying reaction-diffusion equation. The gain in either performance or accuracy is demonstrated on different numerical examples. T3 - ZIB-Report - 07-45 KW - reaction-diffusion equations KW - travelling waves KW - nonlinear scaling KW - discretization error Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-10493 SN - 1438-0064 ER - TY - JOUR A1 - Weiser, Martin T1 - Faster SDC convergence on non-equidistant grids by DIRK sweeps JF - BIT Numerical Mathematics N2 - Spectral deferred correction methods for solving stiff ODEs are known to converge rapidly towards the collocation limit solution on equidistant grids, but show a much less favourable contraction on non-equidistant grids such as Radau-IIa points. We interprete SDC methods as fixed point iterations for the collocation system and propose new DIRK-type sweeps for stiff problems based on purely linear algebraic considerations. Good convergence is recovered also on non-equidistant grids. The properties of different variants are explored on a couple of numerical examples. Y1 - 2015 U6 - https://doi.org/10.1007/s10543-014-0540-y VL - 55 IS - 4 SP - 1219 EP - 1241 ER - TY - GEN A1 - Weiser, Martin T1 - Delayed Residual Compensation for Bidomain Equations T2 - AIP Conference Proceedings N2 - The biodomain model of cardioelectric excitation consists of a reaction‐diffusion equation, an elliptic algebraic constraint, and a set of pointwise ODEs. Fast reaction enforces small time steps, such that for common mesh sizes the reaction‐diffusion equation is easily solved implicitly due to a dominating mass matrix. In contrast, the elliptic constraint does not benefit from small time steps and requires a comparably expensive solution. We propose a delayed residual compensation that improves the solution of the elliptic constraint and thus alleviates the need for long iteration times. Y1 - 2010 U6 - https://doi.org/10.1063/1.3498495 VL - 1281 SP - 419 EP - 422 ER - TY - JOUR A1 - Weiser, Martin T1 - On goal-oriented adaptivity for elliptic optimal control problems JF - Opt. Meth. Softw. N2 - The paper proposes goal-oriented error estimation and mesh refinement for optimal control problems with elliptic PDE constraints using the value of the reduced cost functional as quantity of interest. Error representation, hierarchical error estimators, and greedy-style error indicators are derived and compared to their counterparts when using the all-at-once cost functional as quantity of interest. Finally, the efficiency of the error estimator and generated meshes are demonstrated on numerical examples. Y1 - 2013 VL - 28 IS - 13 SP - 969 EP - 992 ER - TY - GEN A1 - Weiser, Martin T1 - Faster SDC convergence on non-equidistant grids by DIRK sweeps N2 - Spectral deferred correction methods for solving stiff ODEs are known to converge rapidly towards the collocation limit solution on equidistant grids, but show a much less favourable contraction on non-equidistant grids such as Radau-IIa points. We interprete SDC methods as fixed point iterations for the collocation system and propose new DIRK-type sweeps for stiff problems based on purely linear algebraic considerations. Good convergence is recovered also on non-equidistant grids. The properties of different variants are explored on a couple of numerical examples. T3 - ZIB-Report - 13-30 KW - spectral deferred correction Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-18662 SN - 1438-0064 ER - TY - JOUR A1 - Weiser, Martin T1 - Optimization and Identification in Regional Hyperthermia JF - Int. J. Appl. Electromagn. and Mech. Y1 - 2009 VL - 30 SP - 265 EP - 275 ER - TY - JOUR A1 - Weiser, Martin T1 - Pointwise Nonlinear Scaling for Reaction-Diffusion Equations JF - Appl. Num. Math. Y1 - 2009 VL - 59 IS - 8 SP - 1858 EP - 1869 ER - TY - JOUR A1 - Weiser, Martin T1 - Interior point methods in function space JF - SIAM J. Control Optimization Y1 - 2005 VL - 44 IS - 5 SP - 1766 EP - 1786 ER - TY - BOOK A1 - Weiser, Martin T1 - Inside Finite Elements N2 - All relevant implementation aspects of finite element methods are discussed in this book. The focus is on algorithms and data structures as well as on their concrete implementation. Theory is covered as far as it gives insight into the construction of algorithms.Throughout the exercises a complete FE-solver for scalar 2D problems will be implemented in Matlab/Octave. Y1 - 2016 PB - De Gruyter ER - TY - JOUR A1 - Weihrauch, Mirko A1 - Wust, Peter A1 - Weiser, Martin A1 - Nadobny, Johanna A1 - Eisenhardt, Steffen A1 - Budach, Volker A1 - Gellermann, Johanna T1 - Adaptation of antenna profiles for control of MR guided hyperthermia (HT) in a hybrid MR-HT system JF - Medical Physics Y1 - 2007 VL - 34 IS - 12 SP - 4717 EP - 4725 ER - TY - GEN A1 - Volkwein, Stefan A1 - Weiser, Martin T1 - Affine Invariant Convergence Analysis for Inexact Augmented Lagrangian-SQP Methods N2 - An affine invariant convergence analysis for inexact augmented Lagrangian-SQP methods is presented. The theory is used for the construction of an accuracy matching between iteration errors and truncation errors, which arise from the inexact linear system solves. The theoretical investigations are illustrated numerically by an optimal control problem for the Burgers equation. T3 - ZIB-Report - 00-56 KW - nonlinear programming KW - multiplier methods KW - affine invariant norms KW - Burgers' equation Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-6243 ER - TY - JOUR A1 - Volkwein, S. A1 - Weiser, Martin T1 - Affine Invariant Convergence Analysis for Inexact Augmented Lagrangian SQP Methods JF - SIAM J. Control Optim. Y1 - 2002 VL - 41 IS - 3 SP - 875 EP - 899 ER - TY - RPRT A1 - Volkwein, S. A1 - Weiser, Martin T1 - Optimality Conditions for a Constrained Parameter Identification Problem in Hyperthermia Y1 - 2004 IS - 305 PB - University of Graz, SFB F003 CY - Graz, Austria ER - TY - JOUR A1 - Ullrich, Julia A1 - Weiser, Martin A1 - Subramaniam, Jayant A1 - Schenkl, Sebastian A1 - Muggenthaler, Holger A1 - Hubig, Michael A1 - Mall, Gita T1 - The impact of anatomy variation on temperature based time of death estimation JF - International Journal of Legal Medicine N2 - Temperature-based time of death estimation (TTDE) using simulation methods such as the finite element (FE) method promises higher accuracy and broader applicability in nonstandard cooling scenarios than established phenomenological methods. Their accuracy depends crucially on the simulation model to capture the actual situation. The model fidelity in turn hinges on the representation of the corpse’s anatomy in form of computational meshes as well as on the thermodynamic parameters. While inaccuracies in anatomy representation due to coarse mesh resolution are known to have a minor impact on the estimated time of death, the sensitivity with respect to larger differences in the anatomy has so far not been studied. We assess this sensitivity by comparing four independently generated and vastly different anatomical models in terms of the estimated time of death in an identical cooling scenario. In order to isolate the impact of shape variation, the models are scaled to a reference size, and the possible impact of measurement location variation is excluded explicitly, which gives a lower bound on the impact of anatomy on the estimated time of death. Y1 - 2023 U6 - https://doi.org/10.1007/s00414-023-03026-w VL - 137 SP - 1615 EP - 1627 ER -