TY - CHAP A1 - Lindow, Norbert A1 - Redemann, Stefanie A1 - Brünig, Florian A1 - Fabig, Gunar A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen T1 - Quantification of three-dimensional spindle architecture T2 - Methods in Cell Biology Part B N2 - Mitotic and meiotic spindles are microtubule-based structures to faithfully segregate chromosomes. Electron tomography is currently the method of choice to analyze the three-dimensional (3D) architecture of both types of spindles. Over the years, we have developed methods and software for automatic segmentation and stitching of microtubules in serial sections for large-scale reconstructions. 3D reconstruction of microtubules, however, is only the first step toward biological insight. The second step is the analysis of the structural data to derive measurable spindle properties. Here, we present a comprehensive set of techniques to quantify spindle parameters. These techniques provide quantitative analyses of specific microtubule classes and are applicable to a variety of tomographic reconstructions of spindles from different organisms. Y1 - 2018 U6 - https://doi.org/10.1016/bs.mcb.2018.03.012 SN - 0091-679X VL - 145 SP - 45 EP - 64 PB - Academic Press ER - TY - CHAP A1 - Lindow, Norbert A1 - Baum, Daniel A1 - Hege, Hans-Christian T1 - Atomic Accessibility Radii for Molecular Dynamics Analysis T2 - Workshop on Molecular Graphics and Visual Analysis of Molecular Data N2 - In molecular structure analysis and visualization, the molecule’s atoms are often modeled as hard spheres parametrized by their positions and radii. While the atom positions result from experiments or molecular simulations, for the radii typically values are taken from literature. Most often, van der Waals (vdW) radii are used, for which diverse values exist. As a consequence, different visualization and analysis tools use different atomic radii, and the analyses are less objective than often believed. Furthermore, for the geometric accessibility analysis of molecular structures, vdW radii are not well suited. The reason is that during the molecular dynamics simulation, depending on the force field and the kinetic energy in the system, non-bonded atoms can come so close to each other that their vdW spheres intersect. In this paper, we introduce a new kind of atomic radius, called atomic accessibility radius’, that better characterizes the accessibility of an atom in a given molecular trajectory. The new radii reflect the movement possibilities of atoms in the simulated physical system. They are computed by solving a linear program that maximizes the radii of the atoms under the constraint that non-bonded spheres do not intersect in the considered molecular trajectory. Using this data-driven approach, the actual accessibility of atoms can be visualized more precisely. Y1 - 2018 SN - 978-3-03868-061-1 U6 - https://doi.org/10.2312/molva.20181101 PB - The Eurographics Association ER - TY - JOUR A1 - Fabig, Gunar A1 - Kiewisz, Robert A1 - Lindow, Norbert A1 - Powers, James A. A1 - Cota, Vanessa A1 - Quintanilla, Luis J. A1 - Brugués, Jan A1 - Prohaska, Steffen A1 - Chu, Diana S. A1 - Müller-Reichert, Thomas T1 - Sperm-specific meiotic chromosome segregation in C. elegans JF - eLife Y1 - 2020 U6 - https://doi.org/10.7554/eLife.50988 VL - 9 SP - e50988 ER - TY - JOUR A1 - Lindow, Norbert A1 - Brünig, Florian A1 - Dercksen, Vincent J. A1 - Fabig, Gunar A1 - Kiewisz, Robert A1 - Redemann, Stefanie A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen A1 - Baum, Daniel T1 - Semi-automatic stitching of filamentous structures in image stacks from serial-section electron tomography JF - bioRxiv N2 - We present a software-assisted workflow for the alignment and matching of filamentous structures across a 3D stack of serial images. This is achieved by combining automatic methods, visual validation, and interactive correction. After an initial alignment, the user can continuously improve the result by interactively correcting landmarks or matches of filaments. Supported by a visual quality assessment of regions that have been already inspected, this allows a trade-off between quality and manual labor. The software tool was developed to investigate cell division by quantitative 3D analysis of microtubules (MTs) in both mitotic and meiotic spindles. For this, each spindle is cut into a series of semi-thick physical sections, of which electron tomograms are acquired. The serial tomograms are then stitched and non-rigidly aligned to allow tracing and connecting of MTs across tomogram boundaries. In practice, automatic stitching alone provides only an incomplete solution, because large physical distortions and a low signal-to-noise ratio often cause experimental difficulties. To derive 3D models of spindles despite the problems related to sample preparation and subsequent data collection, semi-automatic validation and correction is required to remove stitching mistakes. However, due to the large number of MTs in spindles (up to 30k) and their resulting dense spatial arrangement, a naive inspection of each MT is too time consuming. Furthermore, an interactive visualization of the full image stack is hampered by the size of the data (up to 100 GB). Here, we present a specialized, interactive, semi-automatic solution that considers all requirements for large-scale stitching of filamentous structures in serial-section image stacks. The key to our solution is a careful design of the visualization and interaction tools for each processing step to guarantee real-time response, and an optimized workflow that efficiently guides the user through datasets. Y1 - 2020 U6 - https://doi.org/10.1101/2020.05.28.120899 ER - TY - GEN A1 - Lindow, Norbert A1 - Redemann, Stefanie A1 - Fabig, Gunar A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen T1 - Quantification of Three-Dimensional Spindle Architecture N2 - Mitotic and meiotic spindles are microtubule-based structures to faithfully segregate chromosomes. Electron tomography is currently the method of choice to analyze the three-dimensional architecture of both types of spindles. Over the years, we have developed methods and software for automatic segmentation and stitching of microtubules in serial sections for large-scale reconstructions. Three-dimensional reconstruction of microtubules, however, is only the first step towards biological insight. The second step is the analysis of the structural data to derive measurable spindle properties. Here, we present a comprehensive set of techniques to quantify spindle parameters. These techniques provide quantitative analyses of specific microtubule classes and are applicable to a variety of tomographic reconstructions of spindles from different organisms. T3 - ZIB-Report - 18-07 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-66562 SN - 1438-0064 ER - TY - JOUR A1 - Mahnke, Heinz-Eberhard A1 - Arlt, Tobias A1 - Baum, Daniel A1 - Hege, Hans-Christian A1 - Herter, Felix A1 - Lindow, Norbert A1 - Manke, Ingo A1 - Siopi, Tzulia A1 - Menei, Eve A1 - Etienne, Marc A1 - Lepper, Verena T1 - Virtual unfolding of folded papyri JF - Journal of Cultural Heritage N2 - The historical importance of ancient manuscripts is unique since they provide information about the heritage of ancient cultures. Often texts are hidden in rolled or folded documents. Due to recent impro- vements in sensitivity and resolution, spectacular disclosures of rolled hidden texts were possible by X-ray tomography. However, revealing text on folded manuscripts is even more challenging. Manual unfolding is often too risky in view of the fragile condition of fragments, as it can lead to the total loss of the document. X-ray tomography allows for virtual unfolding and enables non-destructive access to hid- den texts. We have recently demonstrated the procedure and tested unfolding algorithms on a mockup sample. Here, we present results on unfolding ancient papyrus packages from the papyrus collection of the Musée du Louvre, among them objects folded along approximately orthogonal folding lines. In one of the packages, the first identification of a word was achieved, the Coptic word for “Lord”. Y1 - 2020 U6 - https://doi.org/10.1016/j.culher.2019.07.007 VL - 41 SP - 264 EP - 269 PB - Elsevier ER - TY - GEN A1 - Mahnke, Heinz-Eberhard A1 - Arlt, Tobias A1 - Baum, Daniel A1 - Hege, Hans-Christian A1 - Herter, Felix A1 - Lindow, Norbert A1 - Manke, Ingo A1 - Siopi, Tzulia A1 - Menei, Eve A1 - Etienne, Marc A1 - Lepper, Verena T1 - Virtual unfolding of folded papyri N2 - The historical importance of ancient manuscripts is unique since they provide information about the heritage of ancient cultures. Often texts are hidden in rolled or folded documents. Due to recent impro- vements in sensitivity and resolution, spectacular disclosures of rolled hidden texts were possible by X-ray tomography. However, revealing text on folded manuscripts is even more challenging. Manual unfolding is often too risky in view of the fragile condition of fragments, as it can lead to the total loss of the document. X-ray tomography allows for virtual unfolding and enables non-destructive access to hid- den texts. We have recently demonstrated the procedure and tested unfolding algorithms on a mockup sample. Here, we present results on unfolding ancient papyrus packages from the papyrus collection of the Musée du Louvre, among them objects folded along approximately orthogonal folding lines. In one of the packages, the first identification of a word was achieved, the Coptic word for “Lord”. T3 - ZIB-Report - 19-44 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-74338 SN - 1438-0064 ER - TY - GEN A1 - Lindow, Norbert A1 - Brünig, Florian A1 - Dercksen, Vincent J. A1 - Fabig, Gunar A1 - Kiewisz, Robert A1 - Redemann, Stefanie A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen T1 - Semi-automatic Stitching of Serial Section Image Stacks with Filamentous Structures N2 - In this paper, we present a software-assisted workflow for the alignment and matching of filamentous structures across a stack of 3D serial image sections. This is achieved by a combination of automatic methods, visual validation, and interactive correction. After an initial alignment, the user can continuously improve the result by interactively correcting landmarks or matches of filaments. This is supported by a quality assessment that visualizes regions that have been already inspected and, thus, allows a trade-off between quality and manual labor. The software tool was developed in collaboration with biologists who investigate microtubule-based spindles during cell division. To quantitatively understand the structural organization of such spindles, a 3D reconstruction of the numerous microtubules is essential. Each spindle is cut into a series of semi-thick physical sections, of which electron tomograms are acquired. The sections then need to be stitched, i.e. non-rigidly aligned; and the microtubules need to be traced in each section and connected across section boundaries. Experiments led to the conclusion that automatic methods for stitching alone provide only an incomplete solution to practical analysis needs. Automatic methods may fail due to large physical distortions, a low signal-to-noise ratio of the images, or other unexpected experimental difficulties. In such situations, semi-automatic validation and correction is required to rescue as much information as possible to derive biologically meaningful results despite of some errors related to data collection. Since the correct stitching is visually not obvious due to the number of microtubules (up to 30k) and their dense spatial arrangement, these are difficult tasks. Furthermore, a naive inspection of each microtubule is too time consuming. In addition, interactive visualization is hampered by the size of the image data (up to 100 GB). Based on the requirements of our collaborators, we present a practical solution for the semi-automatic stitching of serial section image stacks with filamentous structures. T3 - ZIB-Report - 19-30 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-73739 SN - 1438-0064 ER - TY - CHAP A1 - Kuhn, Alexander A1 - Lindow, Norbert A1 - Günther, Tobias A1 - Wiebel, Alexander A1 - Theisel, Holger A1 - Hege, Hans-Christian T1 - Trajectory Density Projection for Vector Field Visualization T2 - EuroVis 2013, short papers. M. Hlawitschka, Tino Weinkauf (eds.) Y1 - 2013 UR - http://vc.cs.ovgu.de/files/publications/2013/Kuhn_2013_EUROVIS.pdf U6 - https://doi.org/10.2312/PE.EuroVisShort.EuroVisShort2013.031-035 SP - 31 EP - 35 ER - TY - JOUR A1 - Lindow, Norbert A1 - Baum, Daniel A1 - Bondar, Ana-Nicoleta A1 - Hege, Hans-Christian T1 - Exploring cavity dynamics in biomolecular systems JF - BMC Bioinformatics Y1 - 2013 U6 - https://doi.org/10.1186/1471-2105-14-S19-S5 VL - 14 ET - (Suppl 19):S5 ER -