TY - JOUR A1 - Chen, Ying A1 - Koch, Thorsten A1 - Zakiyeva, Nazgul A1 - Liu, Kailiang A1 - Xu, Zhitong A1 - Chen, Chun-houh A1 - Nakano, Junji A1 - Honda, Keisuke T1 - Article's Scientific Prestige: Measuring the Impact of Individual Articles in the Web of Science N2 - We performed a citation analysis on the Web of Science publications consisting of more than 63 million articles and 1.45 billion citations on 254 subjects from 1981 to 2020. We proposed the Article’s Scientific Prestige (ASP) metric and compared this metric to number of citations (#Cit) and journal grade in measuring the scientific impact of individual articles in the large-scale hierarchical and multi-disciplined citation network. In contrast to #Cit, ASP, that is computed based on the eigenvector centrality, considers both direct and indirect citations, and provides steady-state evaluation cross different disciplines. We found that ASP and #Cit are not aligned for most articles, with a growing mismatch amongst the less cited articles. While both metrics are reliable for evaluating the prestige of articles such as Nobel Prize winning articles, ASP tends to provide more persuasive rankings than #Cit when the articles are not highly cited. The journal grade, that is eventually determined by a few highly cited articles, is unable to properly reflect the scientific impact of individual articles. The number of references and coauthors are less relevant to scientific impact, but subjects do make a difference. T3 - ZIB-Report - 22-07 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-86380 VL - 17 IS - 1 SP - 101379 ER - TY - GEN A1 - Turner, Mark A1 - Koch, Thorsten A1 - Serrano, Felipe A1 - Winkler, Michael T1 - Adaptive Cut Selection in Mixed-Integer Linear Programming N2 - Cut selection is a subroutine used in all modern mixed-integer linear programming solvers with the goal of selecting a subset of generated cuts that induce optimal solver performance. These solvers have millions of parameter combinations, and so are excellent candidates for parameter tuning. Cut selection scoring rules are usually weighted sums of different measurements, where the weights are parameters. We present a parametric family of mixed-integer linear programs together with infinitely many family-wide valid cuts. Some of these cuts can induce integer optimal solutions directly after being applied, while others fail to do so even if an infinite amount are applied. We show for a specific cut selection rule, that any finite grid search of the parameter space will always miss all parameter values, which select integer optimal inducing cuts in an infinite amount of our problems. We propose a variation on the design of existing graph convolutional neural networks, adapting them to learn cut selection rule parameters. We present a reinforcement learning framework for selecting cuts, and train our design using said framework over MIPLIB 2017. Our framework and design show that adaptive cut selection does substantially improve performance over a diverse set of instances, but that finding a single function describing such a rule is difficult. Code for reproducing all experiments is available at https://github.com/Opt-Mucca/Adaptive-Cutsel-MILP. T3 - ZIB-Report - 22-04 KW - cut selection KW - mixed-integer linear programming KW - reinforcement learning Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-86055 SN - 1438-0064 ER - TY - GEN A1 - Rehfeldt, Daniel A1 - Koch, Thorsten A1 - Shinano, Yuji T1 - Faster exact solution of sparse MaxCut and QUBO problems T3 - ZIB-Report - 22-02 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-85715 SN - 1438-0064 ER - TY - JOUR A1 - Hoppmann-Baum, Kai A1 - Burdakov, Oleg A1 - Mexi, Gioni A1 - Casselgren, Carl Johan A1 - Koch, Thorsten T1 - Length-Constrained Cycle Partition with an Application to UAV Routing JF - Optimization Methods and Software N2 - This article discusses the Length-Constrained Cycle Partition Problem (LCCP), which constitutes a new generalization of the Travelling Salesperson Problem (TSP). Apart from nonnegative edge weights, the undirected graph in LCCP features a nonnegative critical length parameter for each vertex. A cycle partition, i.e., a vertex-disjoint cycle cover, is a feasible solution for LCCP if the length of each cycle is not greater than the critical length of each vertex contained in it. The goal is to find a feasible partition having a minimum number of cycles. Besides analyzing theoretical properties and developing preprocessing techniques, we propose an elaborate heuristic algorithm that produces solutions of good quality even for large-size instances. Moreover, we present two exact mixed-integer programming formulations (MIPs) for LCCP, which are inspired by well-known modeling approaches for TSP. Further, we introduce the concept of conflict hypergraphs, whose cliques yield valid constraints for the MIP models. We conclude with a discussion on computational experiments that we conducted using (A)TSPLIB-based problem instances. As a motivating example application, we describe a routing problem where a fleet of uncrewed aerial vehicles (UAVs) must patrol a given set of areas. Y1 - 2022 U6 - https://doi.org/10.1080/10556788.2022.2053972 ER - TY - JOUR A1 - Turner, Mark A1 - Koch, Thorsten A1 - Serrano, Felipe A1 - Winkler, Michael T1 - Adaptive Cut Selection in Mixed-Integer Linear Programming JF - Open Journal of Mathematical Optimization N2 - Cutting plane selection is a subroutine used in all modern mixed-integer linear programming solvers with the goal of selecting a subset of generated cuts that induce optimal solver performance. These solvers have millions of parameter combinations, and so are excellent candidates for parameter tuning. Cut selection scoring rules are usually weighted sums of different measurements, where the weights are parameters. We present a parametric family of mixed-integer linear programs together with infinitely many family-wide valid cuts. Some of these cuts can induce integer optimal solutions directly after being applied, while others fail to do so even if an infinite amount are applied. We show for a specific cut selection rule, that any finite grid search of the parameter space will always miss all parameter values, which select integer optimal inducing cuts in an infinite amount of our problems. We propose a variation on the design of existing graph convolutional neural networks, adapting them to learn cut selection rule parameters. We present a reinforcement learning framework for selecting cuts, and train our design using said framework over MIPLIB 2017 and a neural network verification data set. Our framework and design show that adaptive cut selection does substantially improve performance over a diverse set of instances, but that finding a single function describing such a rule is difficult. Code for reproducing all experiments is available at https://github.com/Opt-Mucca/Adaptive-Cutsel-MILP. Y1 - 2023 U6 - https://doi.org/10.5802/ojmo.25 VL - 4 SP - 5 ER - TY - GEN A1 - Charousset-Brignol, Sandrine A1 - van Ackooij, Wim A1 - Oudjane, Nadia A1 - Daniel, Dominique A1 - Noceir, Slimane A1 - Haus, Utz-Uwe A1 - Lazzaro, Alfio A1 - Frangioni, Antonio A1 - Lobato, Rafael A1 - Ghezelsoflu, Ali A1 - Iardella, Niccolò A1 - Galli, Laura A1 - Gorgone, Enrico A1 - dell’Amico, Mauro A1 - Giannelos, Spyros A1 - Moreira, Alex A1 - Strbac, Goran A1 - Borozan, Stefan A1 - Falugi, Paula A1 - Pudjianto, Danny A1 - Wyrwoll, Lothar A1 - Schmitt, Carlo A1 - Franken, Marco A1 - Beulertz, Daniel A1 - Schwaeppe, Henrik A1 - Most, Dieter A1 - Yüksel-Ergün, Inci A1 - Zittel, Janina A1 - Koch, Thorsten T1 - Synergistic approach of multi-energy models for a European optimal energy system management tool T2 - The Project Repository Journal Y1 - 2021 VL - 9 SP - 113 EP - 116 ER - TY - JOUR A1 - Dell’Amico, M. A1 - Hadjidimitriou, Natalia Selini A1 - Koch, Thorsten A1 - Petkovic, Milena T1 - Forecasting Natural Gas Flows in Large Networks JF - Machine Learning, Optimization, and Big Data. MOD 2017. N2 - Natural gas is the cleanest fossil fuel since it emits the lowest amount of other remains after being burned. Over the years, natural gas usage has increased significantly. Accurate forecasting is crucial for maintaining gas supplies, transportation and network stability. This paper presents two methodologies to identify the optimal configuration o parameters of a Neural Network (NN) to forecast the next 24 h of gas flow for each node of a large gas network. In particular the first one applies a Design Of Experiments (DOE) to obtain a quick initial solution. An orthogonal design, consisting of 18 experiments selected among a total of 4.374 combinations of seven parameters (training algorithm, transfer function, regularization, learning rate, lags, and epochs), is used. The best result is selected as initial solution of an extended experiment for which the Simulated Annealing is run to find the optimal design among 89.100 possible combinations of parameters. The second technique is based on the application of Genetic Algorithm for the selection of the optimal parameters of a recurrent neural network for time series forecast. GA was applied with binary representation of potential solutions, where subsets of bits in the bit string represent different values for several parameters of the recurrent neural network. We tested these methods on three municipal nodes, using one year and half of hourly gas flow to train the network and 60 days for testing. Our results clearly show that the presented methodologies bring promising results in terms of optimal configuration of parameters and forecast error. Y1 - 2018 U6 - https://doi.org/https://doi.org/10.1007/978-3-319-72926-8_14 VL - Lecture Notes in Computer Science IS - vol 10710 SP - 158 EP - 171 ER - TY - JOUR A1 - Rehfeldt, Daniel A1 - Koch, Thorsten T1 - Combining NP-Hard Reduction Techniques and Strong Heuristics in an Exact Algorithm for the Maximum-Weight Connected Subgraph Problem JF - SIAM Journal on Optimization N2 - Borne out of a surprising variety of practical applications, the maximum-weight connected subgraph problem has attracted considerable interest during the past years. This interest has not only led to notable research on theoretical properties, but has also brought about several (exact) solvers-with steadily increasing performance. Continuing along this path, the following article introduces several new algorithms such as reduction techniques and heuristics and describes their integration into an exact solver. The new methods are evaluated with respect to both their theoretical and practical properties. Notably, the new exact framework allows to solve common problem instances from the literature faster than all previous approaches. Moreover, one large-scale benchmark instance from the 11th DIMACS Challenge can be solved for the first time to optimality and the primal-dual gap for two other ones can be significantly reduced. Y1 - 2019 U6 - https://doi.org/10.1137/17M1145963 VL - 29 IS - 1 SP - 369 EP - 398 PB - Society for Industrial and Applied Mathematics ER - TY - GEN A1 - Ralphs, Ted A1 - Shinano, Yuji A1 - Berthold, Timo A1 - Koch, Thorsten ED - Hamadi, Youssef T1 - Parallel Solvers for Mixed Integer Linear Optimization T2 - Handbook of Parallel Constraint Reasoning Y1 - 2018 U6 - https://doi.org/10.1007/978-3-319-63516-3_8 SP - 283 EP - 336 PB - Springer Nature ER - TY - CHAP A1 - Breuer, Thomas A1 - Bussieck, Michael A1 - Cao, Karl-Kien A1 - Cebulla, Felix A1 - Fiand, Frederik A1 - Gils, Hans Christian A1 - Gleixner, Ambros A1 - Khabi, Dmitry A1 - Koch, Thorsten A1 - Rehfeldt, Daniel A1 - Wetzel, Manuel T1 - Optimizing Large-Scale Linear Energy System Problems with Block Diagonal Structure by Using Parallel Interior-Point Methods T2 - Operations Research Proceedings 2017 N2 - Current linear energy system models (ESM) acquiring to provide sufficient detail and reliability frequently bring along problems of both high intricacy and increasing scale. Unfortunately, the size and complexity of these problems often prove to be intractable even for commercial state-of-the-art linear programming solvers. This article describes an interdisciplinary approach to exploit the intrinsic structure of these large-scale linear problems to be able to solve them on massively parallel high-performance computers. A key aspect are extensions to the parallel interior-point solver PIPS-IPM originally developed for stochastic optimization problems. Furthermore, a newly developed GAMS interface to the solver as well as some GAMS language extensions to model block-structured problems will be described. Y1 - 2018 U6 - https://doi.org/10.1007/978-3-319-89920-6_85 SP - 641 EP - 647 PB - Springer International Publishing ER - TY - CHAP A1 - Rehfeldt, Daniel A1 - Koch, Thorsten T1 - SCIP-Jack—a solver for STP and variants with parallelization extensions: An update T2 - Operations Research Proceedings 2017 N2 - The Steiner tree problem in graphs is a classical problem that commonly arises in practical applications as one of many variants. Although the different Steiner tree problem variants are usually strongly related, solution approaches employed so far have been prevalently problem-specific. Against this backdrop, the solver SCIP-Jack was created as a general-purpose framework that can be used to solve the classical Steiner tree problem and 11 of its variants. This versatility is achieved by transforming various problem variants into a general form and solving them by using a state-of-the-art MIP-framework. Furthermore, SCIP-Jack includes various newly developed algorithmic components such as preprocessing routines and heuristics. The result is a high-performance solver that can be employed in massively parallel environments and is capable of solving previously unsolved instances. After the introduction of SCIP-Jack at the 2014 DIMACS Challenge on Steiner problems, the overall performance of the solver has considerably improved. This article provides an overview on the current state. Y1 - 2018 SP - 191 EP - 196 ER -