TY - JOUR A1 - Hoppmann-Baum, Kai T1 - On the Complexity of Computing Maximum and Minimum Min‐Cost‐Flows JF - Networks N2 - Consider a flow network, i.e., a directed graph where each arc has a nonnegative capacity value and an associated length, together with nonempty supply intervals for the sources and nonempty demand intervals for the sinks. The Maximum Min-Cost-Flow Problem (MaxMCF) is to find fixed supply and demand values within these intervals such that the optimal objective value of the induced Min-Cost-Flow Problem (MCF) is maximized. In this paper, we show that MaxMCF as well as its uncapacitated variant, the Maximum Transportation Problem (MaxTP), are NP-hard. Further, we prove that MaxMCF is APX-hard if a connectedness-condition regarding the sources and the sinks of the flow network is dropped. Finally, we show how the Minimum Min-Cost-Flow Problem (MinMCF) can be solved in polynomial time. Y1 - 2021 U6 - https://doi.org/10.1002/net.22060 ER - TY - JOUR A1 - Hennings, Felix A1 - Anderson, Lovis A1 - Hoppmann-Baum, Kai A1 - Turner, Mark A1 - Koch, Thorsten T1 - Controlling transient gas flow in real-world pipeline intersection areas JF - Optimization and Engineering N2 - Compressor stations are the heart of every high-pressure gas transport network. Located at intersection areas of the network they are contained in huge complex plants, where they are in combination with valves and regulators responsible for routing and pushing the gas through the network. Due to their complexity and lack of data compressor stations are usually dealt with in the scientific literature in a highly simplified and idealized manner. As part of an ongoing project with one of Germany's largest Transmission System Operators to develop a decision support system for their dispatching center, we investigated how to automatize control of compressor stations. Each station has to be in a particular configuration, leading in combination with the other nearby elements to a discrete set of up to 2000 possible feasible operation modes in the intersection area. Since the desired performance of the station changes over time, the configuration of the station has to adapt. Our goal is to minimize the necessary changes in the overall operation modes and related elements over time, while fulfilling a preset performance envelope or demand scenario. This article describes the chosen model and the implemented mixed integer programming based algorithms to tackle this challenge. By presenting extensive computational results on real world data we demonstrate the performance of our approach. Y1 - 2021 U6 - https://doi.org/https://doi.org/10.1007/s11081-020-09559-y VL - 22 SP - 687 EP - 734 PB - Springer Nature ET - 2 ER - TY - JOUR A1 - Hennings, Felix A1 - Hoppmann-Baum, Kai A1 - Zittel, Janina T1 - Optimizing transient gas network control for challenging real-world instances using MIP-based heuristics JF - Open Journal of Mathematical Optimization Y1 - 2024 U6 - https://doi.org/10.5802/ojmo.29 VL - 5 ER - TY - JOUR A1 - Hoppmann-Baum, Kai A1 - Hennings, Felix A1 - Zittel, Janina A1 - Gotzes, Uwe A1 - Spreckelsen, Eva-Maria A1 - Spreckelsen, Klaus A1 - Koch, Thorsten T1 - An Optimization Approach for the Transient Control of Hydrogen Transport Networks JF - Mathematical Methods of Operations Research Y1 - 2021 IS - Special Issue on Energy Networks ER - TY - JOUR A1 - Gotzes, Uwe A1 - Hoppmann-Baum, Kai T1 - Bounding the final rank during a round robin tournament with integer programming JF - Operational Research N2 - This article is mainly motivated by the urge to answer two kinds of questions regarding the Bundesliga, which is Germany’s primary football (soccer) division having the highest average stadium attendance worldwide: “At any point in the season, what is the lowest final rank a certain team can achieve?” and “At any point in the season, what is the highest final rank a certain team can achieve?”. Although we focus on the Bundesliga in particular, the integer programming formulations we introduce to answer these questions can easily be adapted to a variety of other league systems and tournaments. Y1 - 2020 U6 - https://doi.org/https://doi.org/10.1007/s12351-020-00546-w VL - 1866-1505 ER - TY - JOUR A1 - Hoppmann-Baum, Kai A1 - Hennings, Felix A1 - Lenz, Ralf A1 - Gotzes, Uwe A1 - Heinecke, Nina A1 - Spreckelsen, Klaus A1 - Koch, Thorsten T1 - Optimal Operation of Transient Gas Transport Networks JF - Optimization and Engineering N2 - In this paper, we describe an algorithmic framework for the optimal operation of transient gas transport networks consisting of a hierarchical MILP formulation together with a sequential linear programming inspired post-processing routine. Its implementation is part of the KOMPASS decision support system, which is currently used in an industrial setting. Real-world gas transport networks are controlled by operating complex pipeline intersection areas, which comprise multiple compressor units, regulators, and valves. In the following, we introduce the concept of network stations to model them. Thereby, we represent the technical capabilities of a station by hand-tailored artificial arcs and add them to network. Furthermore, we choose from a predefined set of flow directions for each network station and time step, which determines where the gas enters and leaves the station. Additionally, we have to select a supported simple state, which consists of two subsets of artificial arcs: Arcs that must and arcs that cannot be used. The goal is to determine a stable control of the network satisfying all supplies and demands. The pipeline intersections, that are represented by the network stations, were initially built centuries ago. Subsequently, due to updates, changes, and extensions, they evolved into highly complex and involved topologies. To extract their basic properties and to model them using computer-readable and optimizable descriptions took several years of effort. To support the dispatchers in controlling the network, we need to compute a continuously updated list of recommended measures. Our motivation for the model presented here is to make fast decisions on important transient global control parameters, i.e., how to route the flow and where to compress the gas. Detailed continuous and discrete technical control measures realizing them, which take all hardware details into account, are determined in a subsequent step. In this paper, we present computational results from the KOMPASS project using detailed real-world data. Y1 - 2020 U6 - https://doi.org/10.1007/s11081-020-09584-x VL - 22 SP - 735 EP - 781 ER - TY - JOUR A1 - Prause, Felix A1 - Hoppmann-Baum, Kai A1 - Defourny, Boris A1 - Koch, Thorsten T1 - The maximum diversity assortment selection problem JF - Mathematical Methods of Operations Research N2 - In this article, we introduce the Maximum Diversity Assortment Selection Problem (MDASP), which is a generalization of the two-dimensional Knapsack Problem (2D-KP). Given a set of rectangles and a rectangular container, the goal of 2D-KP is to determine a subset of rectangles that can be placed in the container without overlapping, i.e., a feasible assortment, such that a maximum area is covered. MDASP is to determine a set of feasible assortments, each of them covering a certain minimum threshold of the container, such that the diversity among them is maximized. Thereby, diversity is defined as the minimum or average normalized Hamming distance of all assortment pairs. MDASP was the topic of the 11th AIMMS-MOPTA Competition in 2019. The methods described in this article and the resulting computational results won the contest. In the following, we give a definition of the problem, introduce a mathematical model and solution approaches, determine upper bounds on the diversity, and conclude with computational experiments conducted on test instances derived from the 2D-KP literature. Y1 - 2021 U6 - https://doi.org/https://doi.org/10.1007/s00186-021-00740-2 VL - 93 SP - 521 EP - 554 PB - Mathematical Methods of Operations Research ER - TY - JOUR A1 - Hoppmann-Baum, Kai A1 - Burdakov, Oleg A1 - Mexi, Gioni A1 - Casselgren, Carl Johan A1 - Koch, Thorsten T1 - Length-Constrained Cycle Partition with an Application to UAV Routing JF - Optimization Methods and Software N2 - This article discusses the Length-Constrained Cycle Partition Problem (LCCP), which constitutes a new generalization of the Travelling Salesperson Problem (TSP). Apart from nonnegative edge weights, the undirected graph in LCCP features a nonnegative critical length parameter for each vertex. A cycle partition, i.e., a vertex-disjoint cycle cover, is a feasible solution for LCCP if the length of each cycle is not greater than the critical length of each vertex contained in it. The goal is to find a feasible partition having a minimum number of cycles. Besides analyzing theoretical properties and developing preprocessing techniques, we propose an elaborate heuristic algorithm that produces solutions of good quality even for large-size instances. Moreover, we present two exact mixed-integer programming formulations (MIPs) for LCCP, which are inspired by well-known modeling approaches for TSP. Further, we introduce the concept of conflict hypergraphs, whose cliques yield valid constraints for the MIP models. We conclude with a discussion on computational experiments that we conducted using (A)TSPLIB-based problem instances. As a motivating example application, we describe a routing problem where a fleet of uncrewed aerial vehicles (UAVs) must patrol a given set of areas. Y1 - 2022 U6 - https://doi.org/10.1080/10556788.2022.2053972 ER -