TY - CHAP A1 - Kuhn, Alexander A1 - Engelke, Wito A1 - Flatken, Markus A1 - Hege, Hans-Christian A1 - Hotz, Ingrid T1 - Topology-based Analysis for Multimodal Atmospheric Data of Volcano Eruptions T2 - Topological Methods in Data Analysis and Visualization IV Y1 - 2017 U6 - https://doi.org/10.1007/978-3-319-44684-4_2 SP - 35 EP - 50 PB - Springer CY - Cham, Schweiz ER - TY - CHAP A1 - Baum, Daniel A1 - Mahlow, Kristin A1 - Lamecker, Hans A1 - Zachow, Stefan A1 - Müller, Johannes A1 - Hege, Hans-Christian T1 - The Potential of Surface-based Geometric Morphometrics for Evolutionary Studies: An Example using Dwarf Snakes (Eirenis) T2 - Abstract in DigitalSpecimen 2014 N2 - Geometric morphometrics plays an important role in evolutionary studies. The state-of-the-art in this field are landmark-based methods. Since the landmarks usually need to be placed manually, only a limited number of landmarks are generally used to represent the shape of an anatomical structure. As a result, shape characteristics that cannot be properly represented by small sets of landmarks are disregarded. In this study, we present a method that is free of this limitation. The method takes into account the whole shape of an anatomical structure, which is represented as a surface, hence the term ‘surface-based morphometrics’. Correspondence between two surfaces is established by defining a partitioning of the surfaces into homologous surface patches. The first step for the generation of a surface partitioning is to place landmarks on the surface. Subsequently, the landmarks are connected by curves lying on the surface. The curves, called ‘surface paths’, might either follow specific anatomical features or they can be geodesics, that is, shortest paths on the surface. One important requirement, however, is that the resulting surface path networks are topologically equivalent across all surfaces. Once the surface path networks have been defined, the surfaces are decomposed into patches according to the path networks. This approach has several advantages. One of them is that we can discretize the surface by as many points as desired. Thus, even fine shape details can be resolved if this is of interest for the study. Since a point discretization is used, another advantage is that well-established analysis methods for landmark-based morphometrics can be utilized. Finally, the shapes can be easily morphed into one another, thereby greatly supporting the understanding of shape changes across all considered specimens. To show the potential of the described method for evolutionary studies of biological specimens, we applied the method to the para-basisphenoid complex of the snake genus Eirenis. By using this anatomical structure as example, we present all the steps that are necessary for surface-based morphometrics, including the segmentation of the para-basisphenoid complex from micro-CT data sets. We also show some first results using statistical analysis as well as classification methods based on the presented technique. Y1 - 2014 ER - TY - GEN A1 - Stoppel, Sergej A1 - Hege, Hans-Christian A1 - Wiebel, Alexander T1 - Visibility-Driven Depth Determination of Surface Patches in Direct Volume Rendering N2 - This paper presents an algorithm called surfseek for selecting surfaces on the most visible features in direct volume rendering (DVR). The algorithm is based on a previously published technique (WYSIWYP) for picking 3D locations in DVR. The new algorithm projects a surface patch on the DVR image, consisting of multiple rays. For each ray the algorithm uses WYSIWYP or a variant of it to find the candidates for the most visible locations along the ray. Using these candidates the algorithm constructs a graph and computes a minimum cut on this graph. The minimum cut represents a very visible but relatively smooth surface. In the last step the selected surface is displayed. We provide examples for the results in real-world dataset as well as in artificially generated datasets. T3 - ZIB-Report - 14-11 KW - Interaction Techniques KW - Volume Rendering KW - Picking KW - Surfaces Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-50266 SN - 1438-0064 ER - TY - GEN A1 - Polthier, Konrad A1 - Sullivan, John A1 - Ziegler, Günter M. A1 - Hege, Hans-Christian ED - Deuflhard, Peter ED - et al., T1 - Visualization T2 - MATHEON - Mathematics for Key Technologies Y1 - 2014 SN - 978-3-03719-137-8 U6 - https://doi.org/10.4171/137 SP - 335 EP - 339 PB - European Mathematical Society ER - TY - GEN A1 - Lamecker, Hans A1 - Hege, Hans-Christian A1 - Tabelow, Karsten A1 - Polzehl, Jörg ED - Deuflhard, Peter ED - et al., T1 - Image Processing T2 - MATHEON - Mathematics for Key Technologies Y1 - 2014 U6 - https://doi.org/10.4171/137 SP - 359 EP - 376 PB - European Mathematical Society ER - TY - CHAP A1 - Engelke, Wito A1 - Kuhn, Alexander A1 - Flatken, Markus A1 - Chen, Fang A1 - Hege, Hans-Christian A1 - Gerndt, Andreas A1 - Hotz, Ingrid T1 - Atmospheric Impact of Volcano Eruptions T2 - Proceedings IEEE SciVis 2014 N2 - The analysis of data that captures volcanic eruptions and their atmospheric aftermath plays an important role for domain experts to gain a deeper understanding of the volcanic eruption and their consequences for atmosphere, climate and air traffic. Thereby, one major challenge is to extract and combine the essential information, which is spread over various, mostly sparse data sources. This requires a careful integration of each data set with its strength and limitations. The sparse, but more reliable measurement data is mainly used to calibrate the more dense simulation data. This work combines a collection of visualization approaches into an exploitative framework. The goal is to support the domain experts to build a complete picture of the situation. But it is also important to understand the individual data sources, the wealth of their information and the quality of the simulation results. All presented methods are designed for direct interaction with the data from different perspectives rather than the sole generation of some final images. Y1 - 2014 ER - TY - GEN A1 - Kozlikova, Barbora A1 - Krone, Michael A1 - Falk, Martin A1 - Lindow, Norbert A1 - Baaden, Marc A1 - Baum, Daniel A1 - Viola, Ivan A1 - Parulek, Julius A1 - Hege, Hans-Christian T1 - Visualization of Biomolecular Structures: State of the Art N2 - Structural properties of molecules are of primary concern in many fields. This report provides a comprehensive overview on techniques that have been developed in the fields of molecular graphics and visualization with a focus on applications in structural biology. The field heavily relies on computerized geometric and visual representations of three-dimensional, complex, large, and time-varying molecular structures. The report presents a taxonomy that demonstrates which areas of molecular visualization have already been extensively investigated and where the field is currently heading. It discusses visualizations for molecular structures, strategies for efficient display regarding image quality and frame rate, covers different aspects of level of detail, and reviews visualizations illustrating the dynamic aspects of molecular simulation data. The survey concludes with an outlook on promising and important research topics to foster further success in the development of tools that help to reveal molecular secrets. T3 - ZIB-Report - 15-63 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-57217 SN - 1438-0064 ER - TY - CHAP A1 - Kozlikova, Barbora A1 - Krone, Michael A1 - Lindow, Norbert A1 - Falk, Martin A1 - Baaden, Marc A1 - Baum, Daniel A1 - Viola, Ivan A1 - Parulek, Julius A1 - Hege, Hans-Christian T1 - Visualization of Biomolecular Structures: State of the Art T2 - EuroVis 2015 STARS Proceedings N2 - Structural properties of molecules are of primary concern in many fields. This report provides a comprehensive overview on techniques that have been developed in the fields of molecular graphics and visualization with a focus on applications in structural biology. The field heavily relies on computerized geometric and visual representations of three-dimensional, complex, large, and time-varying molecular structures. The report presents a taxonomy that demonstrates which areas of molecular visualization have already been extensively investigated and where the field is currently heading. It discusses visualizations for molecular structures, strategies for efficient display regarding image quality and frame rate, covers different aspects of level of detail, and reviews visualizations illustrating the dynamic aspects of molecular simulation data. The report concludes with an outlook on promising and important research topics to enable further success in advancing the knowledge about interaction of molecular structures. Y1 - 2015 U6 - https://doi.org/10.2312/eurovisstar.20151112 SP - 61 EP - 81 ER - TY - GEN A1 - Deuflhard, Peter A1 - Hege, Hans-Christian ED - Lepper, Verena ED - Deuflhard, Peter ED - Markschies, Christoph T1 - Raumtiefe in Malerei und Computergrafik T2 - Räume - Bilder - Kulturen N2 - Einführung: Die Tiefenwirkung dreidimensionaler Räume in einem zweidimensionalen Bild einzufangen, ist ein Faszinosum nahezu aller Kulturen der Menschheitsgeschichte. Der vorliegende Aufsatz folgt den Spuren dieses Faszinosums, vergleichend in der Malerei und der mathematisierten Computergrafik. Die Entdeckung der Zentralperspektive in der italienischen Renaissance zeigt bereits den engen Zusammenhang von Malerei und Mathematik. Auf der Suche nach Maltechniken, mit denen Raumtiefe bildnerisch dargestellt werden kann, beginnen wir in Kap. 2 mit einem chronologischen Gang durch verschiedene Epochen der europäischen Malerei. Hieraus abgeleitete Prinzipien, soweit sie im Rechner realisierbar scheinen, stellen wir in Kap. 3 am Beispiel moderner Methoden der mathematischen Visualisierung vor. Y1 - 2015 SN - 978-3-11-035993-0 SP - 33 EP - 46 PB - Walter De Gruyter ER - TY - GEN A1 - Kuhn, Alexander A1 - Engelke, Wito A1 - Flatken, Markus A1 - Hege, Hans-Christian A1 - Hotz, Ingrid T1 - Topology-based Analysis for Multimodal Atmospheric Data of Volcano Eruptions N2 - Many scientific applications deal with data from a multitude of different sources, e.g., measurements, imaging and simulations. Each source provides an additional perspective on the phenomenon of interest, but also comes with specific limitations, e.g. regarding accuracy, spatial and temporal availability. Effectively combining and analyzing such multimodal and partially incomplete data of limited accuracy in an integrated way is challenging. In this work, we outline an approach for an integrated analysis and visualization of the atmospheric impact of volcano eruptions. The data sets comprise observation and imaging data from satellites as well as results from numerical particle simulations. To analyze the clouds from the volcano eruption in the spatiotemporal domain we apply topological methods. Extremal structures reveal structures in the data that support clustering and comparison. We further discuss the robustness of those methods with respect to different properties of the data and different parameter setups. Finally we outline open challenges for the effective integrated visualization using topological methods. T3 - ZIB-Report - 16-03 KW - multi-modal, intergrated data analysis, topology Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-57043 SN - 1438-0064 ER - TY - JOUR A1 - Kasten, Jens A1 - Reininghaus, Jan A1 - Hotz, Ingrid A1 - Hege, Hans-Christian A1 - Noack, Bernd A1 - Daviller, Guillaume A1 - Morzyński, Marek T1 - Acceleration feature points of unsteady shear flows JF - Archives of Mechanics N2 - A framework is proposed for extracting features in 2D transient flows, based on the acceleration field to ensure Galilean invariance. The minima of the acceleration magnitude, i.e. a superset of the acceleration zeros, are extracted and discriminated into vortices and saddle points --- based on the spectral properties of the velocity Jacobian. The extraction of topological features is performed with purely combinatorial algorithms from discrete computational topology. The feature points are prioritized with persistence, as a physically meaningful importance measure. These features are tracked in time with a robust algorithm for tracking features. Thus a space-time hierarchy of the minima is built and vortex merging events are detected. The acceleration feature extraction strategy is applied to three two-dimensional shear flows: (1) an incompressible periodic cylinder wake, (2) an incompressible planar mixing layer and (3) a weakly compressible planar jet. The vortex-like acceleration feature points are shown to be well aligned with acceleration zeros, maxima of the vorticity magnitude, minima of pressure field and minima of λ2. Y1 - 2016 VL - 68 IS - 1 SP - 55 EP - 80 ER - TY - GEN A1 - Kasten, Jens A1 - Reininghaus, Jan A1 - Hotz, Ingrid A1 - Hege, Hans-Christian A1 - Noack, Bernd A1 - Daviller, Guillaume A1 - Morzyński, Marek T1 - Acceleration feature points of unsteady shear flows N2 - A framework is proposed for extracting features in 2D transient flows, based on the acceleration field to ensure Galilean invariance. The minima of the acceleration magnitude, i.e. a superset of the acceleration zeros, are extracted and discriminated into vortices and saddle points --- based on the spectral properties of the velocity Jacobian. The extraction of topological features is performed with purely combinatorial algorithms from discrete computational topology. The feature points are prioritized with persistence, as a physically meaningful importance measure. These features are tracked in time with a robust algorithm for tracking features. Thus a space-time hierarchy of the minima is built and vortex merging events are detected. The acceleration feature extraction strategy is applied to three two-dimensional shear flows: (1) an incompressible periodic cylinder wake, (2) an incompressible planar mixing layer and (3) a weakly compressible planar jet. The vortex-like acceleration feature points are shown to be well aligned with acceleration zeros, maxima of the vorticity magnitude, minima of pressure field and minima of λ2. T3 - ZIB-Report - 15-65 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-58397 SN - 1438-0064 ER - TY - CHAP A1 - Jácome, Leonardo Agudo A1 - Eggeler, Gunter A1 - Pöthkow, Kai A1 - Paetsch, Olaf A1 - Hege, Hans-Christian T1 - Three-Dimensional Characterization of Superdislocation Interactions in the High Temperature and Low Stress Creep Regime of Ni-Base Superalloy Single Crystals T2 - Proceedings of CREEP 2015 – 13th International Conference on Creep and Fracture of Engineering Materials and Structures, May 31 – June 4, 2015, Toulouse, France N2 - Monocrystaline Ni-base superalloys are the material of choice for first row blades in jet engine gas turbines. Using a novel visualization tool for 3D reconstruction and visualization of dislocation line segments from stereo-pairs of scanning transmission electron microscopies, the superdislocation substructures in Ni-base superalloy LEK 94 (crept to ε = 26%) are characterized. Probable scenarios are discussed, how these dislocation substructures form. Y1 - 2015 SP - 16 EP - 17 ER - TY - GEN A1 - Bojarovski, Stefan A1 - Hege, Hans-Christian A1 - Lie, Han Cheng A1 - Weber, Marcus T1 - Topological analysis and visualization of scalar functions characterizing conformational transitions of molecules on multiple time-scales T2 - Shape Up 2015 - Exercises in Materials Geometry and Topology, 14-18 Sept. 2015, Berlin, Germany N2 - Molecular processes such as protein folding or ligand-receptor-binding can be understood by analyzing the free energy landscape. Those processes are often metastable, i.e. the molecular systems remain in basins around local minima of the free energy landscape, and in rare cases undergo gauche transitions between metastable states by passing saddle-points of this landscape. By discretizing the configuration space, this can be modeled as a discrete Markov process. One way to compute the transition rates between conformations of a molecular system is by utilizing Transition Path Theory and the concept of committor functions. A fundamental problem from the computational point of view is that many time-scales are involved, ranging from 10^(-14) sec for the fastest motion to 10^(-6) sec or more for conformation changes that cause biological effects. The goal of our work is to provide a better understanding of such transitions in configuration space on various time-scales by analyzing characteristic scalar functions topologically and geometrically. We are developing suitable visualization and interaction techniques to support our analysis. For example, we are analyzing a transition rate indicator function by computing and visualizing its Reeb graph together with the sets of molecular states corresponding to maxima of the transition rate indicator function. A particular challenge is the high dimensionality of the domain which does not allow for a straightforward visualization of the function. The computational topology approach to the analysis of the transition rate indicator functions for a molecular system allows to explore different time scales of the system by utilizing coarser or finer topological partitioning of the function. A specific goal is the development of tools for analyzing the hierarchy of these partitionings. This approach tackles the analysis of a complex and sparse dataset from a different angle than the well-known spectral analysis of Markov State Models. Y1 - 2015 ER - TY - JOUR A1 - Hermann, Gunter A1 - Pohl, Vincent A1 - Tremblay, Jean Christophe A1 - Paulus, Beate A1 - Hege, Hans-Christian A1 - Schild, Axel T1 - ORBKIT – A modular Python toolbox for cross-platform post-processing of quantum chemical wavefunction data JF - Journal of Computational Chemistry N2 - ORBKIT is a toolbox for postprocessing electronic structure calculations based on a highly modular and portable Python architecture. The program allows computing a multitude of electronic properties of molecular systems on arbitrary spatial grids from the basis set representation of its electronic wave function, as well as several grid-independent properties. The required data can be extracted directly from the standard output of a large number of quantum chemistry programs. ORBKIT can be used as a standalone program to determine standard quantities, for example, the electron density, molecular orbitals, and derivatives thereof. The cornerstone of ORBKIT is its modular structure. The existing basic functions can be arranged in an individual way and can be easily extended by user-written modules to determine any other derived quantity. ORBKIT offers multiple output formats that can be processed by common visualization tools (VMD, Molden, etc.). Additionally, ORBKIT offers routines to order molecular orbitals computed at different nuclear configurations according to their electronic character and to interpolate the wavefunction between these configurations. The program is open-source under GNU-LGPLv3 license and freely available at https://github.com/orbkit/orbkit/. This article provides an overview of ORBKIT with particular focus on its capabilities and applicability, and includes several example calculations. Y1 - 2016 U6 - https://doi.org/10.1002/jcc.24358 VL - 37 IS - 16 SP - 1511 EP - 1520 ER - TY - JOUR A1 - Goubergrits, Leonid A1 - Osman, Jan A1 - Mevert, Ricardo A1 - Kertzscher, Ulrich A1 - Pöthkow, Kai A1 - Hege, Hans-Christian T1 - Turbulence in blood damage modeling JF - The International Journal of Artificial Organs N2 - Purpose: To account for the impact of turbulence in blood damage modeling, a novel approach based on the generation of instantaneous flow fields from RANS simulations is proposed. Methods: Turbulent flow in a bileaflet mechanical heart valve was simulated using RANS-based (SST k-ω) flow solver using FLUENT 14.5. The calculated Reynolds shear stress (RSS) field is transformed into a set of divergence-free random vector fields representing turbulent velocity fluctuations using procedural noise functions. To consider the random path of the blood cells, instantaneous flow fields were computed for each time step by summation of RSS-based divergence-free random and mean velocity fields. Using those instantaneous flow fields, instantaneous pathlines and corresponding point-wise instantaneous shear stresses were calculated. For a comparison, averaged pathlines based on mean velocity field and respective viscous shear stresses together with RSS values were calculated. Finally, the blood damage index (hemolysis) was integrated along the averaged and instantaneous pathlines using a power law approach and then compared. Results: Using RSS in blood damage modeling without a correction factor overestimates damaging stress and thus the blood damage (hemolysis). Blood damage histograms based on both presented approaches differ. Conclusions: A novel approach to calculate blood damage without using RSS as a damaging parameter is established. The results of our numerical experiment support the hypothesis that the use of RSS as a damaging parameter should be avoided. Y1 - 2016 U6 - https://doi.org/10.5301/ijao.5000476 VL - 39 IS - 4 SP - 147 EP - 210 ER - TY - JOUR A1 - Willie, Bettina M. A1 - Pap, Thomas A1 - Perka, Carsten A1 - Schmidt, Carsten Oliver A1 - Eckstein, Felix A1 - Arampatzis, Adamantios A1 - Hege, Hans-Christian A1 - Madry, Henning A1 - Vortkamp, Andrea A1 - Duda, Georg T1 - OVERLOAD – Rolle der Gelenküberlastung in der primären Arthrose – Die Krankheitsprogression verstehen und vermeiden JF - Zeitschrift für Rheumatologie N2 - Intakte Gelenke sind eine Voraussetzung für das Funktionieren des Skeletts und die Mobilität im Lebensalltag. Ein gesunder Bewegungsapparat ist die Grundlage für die Funktionsfähigkeit des Herz-Kreislauf-Systems wie auch der Immunabwehr. Bewegungs- und Physiotherapie sowie verschiedene Formen der Patientenaktivität stellen essenzielle klinische Ansätze in der Behandlung von neurodegenerativen Erkrankungen, Schlaganfall, Diabetes und Krebs dar. Kommt es zu degenerativen Veränderungen von Gelenken, bedeutet dies eine wesentliche Beeinträchtigung der Mobilität. Nächtliche Schmerzen und Schlafstörungen treten in fortgeschrittenen Stadien auf und sind besonders belastend. Arthrose wird auch als degenerative Gelenkerkrankung bezeichnet. Sie geht mit Veränderungen in der Struktur und Zusammensetzung des Gelenkknorpels wie auch des verkalkten Knorpels, der subchondralen Kortikalis, der subchondralen Spongiosa, des Meniskus, der Gelenkkapsel und der Synovialis einher, was schließlich zur Degeneration dieser Gewebe führt, aus denen sich die Synovialgelenke zusammensetzen. Y1 - 2015 U6 - https://doi.org/10.1007/s00393-014-1561-2 VL - 74 SP - 618 EP - 621 ER - TY - GEN A1 - Sieber, Moritz A1 - Kuhn, Alexander A1 - Hege, Hans-Christian A1 - Paschereit, C. Oliver A1 - Oberleithner, Kilian T1 - A Graphical Representation of the Spectral Proper Orthogonal Decomposition T2 - 68th Annual Meeting of the APS Division of Fluid Dynamics, Gallery of Fluid Motion, Nov 22-24, 2015, Boston, MA, USA. N2 - We consider the spectral proper orthogonal decomposition (SPOD) for experimental data of a turbulent swirling jet. This newly introduced method combines the advantages of spectral methods, such as Fourier decomposition or dynamic mode decomposition, with the energy-ranked proper orthogonal decomposition (POD). This poster visualizes how the modal energy spectrum transitions from the spectral purity of Fourier space to the sparsity of POD space. The transition is achieved by changing a single parameter – the width of the SPOD filter. Each dot in the 3D space corresponds to an SPOD mode pair, where the size and color indicates its spectral coherence. What we notice is that neither the Fourier nor the POD spectrum achieves a clear separation of the dynamic phenomena. Scanning through the graph from the front plane (Fourier) to the back plane (POD), we observe how three highly coherent SPOD modes emerge from the dispersed Fourier spectrum and later branch out into numerous POD modes. The spatial properties of these three individual SPOD modes are displayed in the back of the graph using line integral convolution colored by vorticity. The first two modes correspond to single-helical global instabilities that are well known for these flows. Their coexistence, however, has not been observed until now. The third mode is of double- helical shape and has not been observed so far. For this considered data set and many others, the SPOD is superior in identification of coherent structures in turbulent flows. Hopefully, it gives access to new fluid dynamic phenomena and enriches the available methods. Y1 - 2015 ER - TY - GEN A1 - Kramer, Tobias A1 - Noack, Matthias A1 - Baum, Daniel A1 - Hege, Hans-Christian A1 - Heller, Eric J. T1 - Dust and gas emission from cometary nuclei: the case of comet 67P/Churyumov-Gerasimenko N2 - Comets display with decreasing solar distance an increased emission of gas and dust particles, leading to the formation of the coma and tail. Spacecraft missions provide insight in the temporal and spatial variations of the dust and gas sources located on the cometary nucleus. For the case of comet 67P/Churyumov-Gerasimenko (67P/C-G), the long-term obser- vations from the Rosetta mission point to a homogeneous dust emission across the entire illuminated surface. Despite the homogeneous initial dis- tribution, a collimation in jet-like structures becomes visible. We propose that this observation is linked directly to the complex shape of the nucleus and projects concave topographical features into the dust coma. To test this hypothesis, we put forward a gas-dust description of 67P/C-G, where gravitational and gas forces are accurately determined from the surface mesh and the rotation of the nucleus is fully incorporated. The emerging jet-like structures persist for a wide range of gas-dust interactions and show a dust velocity dependent bending. T3 - ZIB-Report - 17-78 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-66338 SN - 1438-0064 ER - TY - GEN A1 - Stalling, Detlev A1 - Seebass, Martin A1 - Zöckler, Malte A1 - Hege, Hans-Christian T1 - Hyperthermia Treatment Planning with HyperPlan - User's Manual N2 - HyperPlan is a software system for performing 3D-simulations and treatment planning in regional hyperthermia. It allows the user to understand the complex effects of electromagnetic wave propagation and heat transport inside a patient's body. Optimized power amplitudes and phase settings can be calculated for the BSD radiowave applicators Sigma 60 and Sigma 2000 (eye-applicator). HyperPlan is built on top of the modular, object-oriented visualization system Amira. This system already contains powerful algorithms for image processing, geometric modelling and 3D graphics display. HyperPlan provides a number of hyperthermia-specific modules, allowing the user to create 3D tetrahedral patient models suitable for treatment planning. In addition, all numerical simulation modules required for hyperthermia simulation are part of HyperPlan. This guide provides a step-by-step introduction to hyperthermia planning using HyperPlan. It also describes the usage of the underlying visualization system Amira. T3 - ZIB-Report - 00-27 KW - image segmentation KW - grid generation KW - visualization KW - therapy planning Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-5957 ER - TY - GEN A1 - Hege, Hans-Christian A1 - Merzky, Andre A1 - Zachow, Stefan T1 - Distributed Visualization with OpenGL Vizserver: Practical Experiences N2 - The increasing demand for distributed solutions in computing technology does not stop when it comes to visualization techniques. However, the capabilities of todays applications to perform remote rendering are limited by historical design legacys. Especially the popular X11 protokoll, which has been proven to be extremely flexible and usefull for remote 2D graphics applications, breaks down for the case of remote 3D rendering. In this white paper, we give a short overview of generic remote rendering technologies available today, and compare their performance to the recently released vizserver by SGI: a network extension to the SGI OpenGL rendering engines. T3 - ZIB-Report - 00-31 KW - remote visualization KW - high performance computing Y1 - 2000 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-5992 ER - TY - GEN A1 - Kähler, Ralf A1 - Simon, Mark A1 - Hege, Hans-Christian T1 - Fast Volume Rendering of Sparse High-Resolution Datasets Using Adaptive Mesh Refinement Hierarchies N2 - In this paper we present an algorithm that accelerates 3D texture-based volume rendering of large and sparse data sets. A hierarchical data structure (known as AMR tree) consisting of nested uniform grids is employed in order to efficiently encode regions of interest. The hierarchies resulting from this kind of space partitioning yield a good balance between the amount of volume to render and the number of texture bricks -- a prerequisite for fast rendering. Comparing our approach to an octree based algorithm we show that our algorithm increases rendering performance significantly for sparse data. A further advantage is that less parameter tuning is necessary. T3 - ZIB-Report - 01-25 KW - scalar field visualization KW - volume visualization KW - volume rendering KW - 3D texture mapping KW - hierarchical space partitioning KW - AMR tree KW - octree KW - spar Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-6516 ER - TY - GEN A1 - Kähler, Ralf A1 - Hege, Hans-Christian T1 - Interactive Volume Rendering of Adaptive Mesh Refinement Data N2 - Many phenomena in nature and engineering happen simultaneously on rather diverse spatial and temporal scales, i.e.\ exhibit a multi-scale character. Therefore various hierarchical data structures and numerical schemes have been devised to represent quantitatively such phenomena. A special numerical multilevel technique, associated with a particular hierarchical data structure, is so-called Adaptive Mesh Refinement (AMR). This scheme achieves locally very high spatial and temporal resolutions. Due to its popularity, many scientists are in need of interactive visualization tools for AMR data. In this article we present a 3D texture-based volume rendering algorithm for AMR data, that directly utilizes the hierarchical structure. Thereby interactive rendering even for large data sets is achieved. In particular the problems of interpolation artifacts, opacity corrections, and texture memory limitations are addressed. The algorithm's value in practice is demonstrated with simulation and image data. T3 - ZIB-Report - 01-30 KW - Scalar field visualization KW - multiresolution volume rendering KW - AMR hierarchies KW - 3D texture mapping Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-6561 ER - TY - GEN A1 - Zöckler, Malte A1 - Rein, Karlheinz A1 - Brandt, Robert A1 - Stalling, Detlev A1 - Hege, Hans-Christian T1 - Creating Virtual Insect Brains with Amira N2 - By combining techniques of preparation, histology, confocal microscopy, data visualization and data processing, we have created and recently published a standard brain model for drosophila and honey bee brains. This report describes the algorithms and implementation of the corresponding software modules. At the same time it serves as a user's guide for scientist who want to reproduce the results for differerent species or mutants. T3 - ZIB-Report - 01-32 KW - visualization KW - anatomical atlas Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-6589 ER - TY - GEN A1 - Zachow, Stefan A1 - Zilske, Michael A1 - Hege, Hans-Christian T1 - 3D reconstruction of individual anatomy from medical image data: Segmentation and geometry processing N2 - For medical diagnosis, visualization, and model-based therapy planning three-dimensional geometric reconstructions of individual anatomical structures are often indispensable. Computer-assisted, model-based planning procedures typically cover specific modifications of “virtual anatomy” as well as numeric simulations of associated phenomena, like e.g. mechanical loads, fluid dynamics, or diffusion processes, in order to evaluate a potential therapeutic outcome. Since internal anatomical structures cannot be measured optically or mechanically in vivo, three-dimensional reconstruction of tomographic image data remains the method of choice. In this work the process chain of individual anatomy reconstruction is described which consists of segmentation of medical image data, geometrical reconstruction of all relevant tissue interfaces, up to the generation of geometric approximations (boundary surfaces and volumetric meshes) of three-dimensional anatomy being suited for finite element analysis. All results presented herein are generated with amira ® – a highly interactive software system for 3D data analysis, visualization and geometry reconstruction. T3 - ZIB-Report - 07-41 KW - Medical image segmentation KW - computational geometry KW - virtual anatomy KW - finite element meshes Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-10440 SN - 1438-0064 ER - TY - GEN A1 - Deuflhard, Peter A1 - Hege, Hans-Christian T1 - Die Vision einer individuellen quantitativen Medizin N2 - Die Autoren schreiben dieses Papier aus der eingeschränkten Sicht der Mathematik und der Informationstechnik. Um den speziellen Beitrag dieser Disziplinen überhaupt diskutieren zu können, sehen wir uns jedoch gezwungen, einen Rahmen abzustecken, den wir für das Jahr 2020 vorhersehen -- nach Wahrscheinlichkeit und aus unserem engeren fachlichen Blickwinkel. Vorab bitten wir schon einmal bei den medizinischen Fachleuten um Nachsicht, wenn wir uns in ihrem Revier allzu dillettantisch bewegen. Vielleicht fördert aber auch unser eingeschränkter Blickwinkel ansonsten unbedachte Aspekte zutage -- das hoffen wir zumindest. T3 - ZIB-Report - 05-47 Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-8805 ER - TY - CHAP A1 - Hanik, Martin A1 - Hege, Hans-Christian A1 - von Tycowicz, Christoph T1 - A Nonlinear Hierarchical Model for Longitudinal Data on Manifolds T2 - 2022 IEEE 19th International Symposium on Biomedical Imaging (ISBI) N2 - Large longitudinal studies provide lots of valuable information, especially in medical applications. A problem which must be taken care of in order to utilize their full potential is that of correlation between intra-subject measurements taken at different times. For data in Euclidean space this can be done with hierarchical models, that is, models that consider intra-subject and between-subject variability in two different stages. Nevertheless, data from medical studies often takes values in nonlinear manifolds. Here, as a first step, geodesic hierarchical models have been developed that generalize the linear ansatz by assuming that time-induced intra-subject variations occur along a generalized straight line in the manifold. However, this is often not the case (e.g., periodic motion or processes with saturation). We propose a hierarchical model for manifold-valued data that extends this to include trends along higher-order curves, namely Bézier splines in the manifold. To this end, we present a principled way of comparing shape trends in terms of a functional-based Riemannian metric. Remarkably, this metric allows efficient, yet simple computations by virtue of a variational time discretization requiring only the solution of regression problems. We validate our model on longitudinal data from the osteoarthritis initiative, including classification of disease progression. Y1 - 2022 U6 - https://doi.org/10.1109/ISBI52829.2022.9761465 SP - 1 EP - 5 ER - TY - CHAP A1 - Harth, Philipp A1 - Bast, Arco A1 - Troidl, Jakob A1 - Meulemeester, Bjorge A1 - Pfister, Hanspeter A1 - Beyer, Johanna A1 - Oberlaender, Marcel A1 - Hege, Hans-Christian A1 - Baum, Daniel T1 - Rapid Prototyping for Coordinated Views of Multi-scale Spatial and Abstract Data: A Grammar-based Approach T2 - Eurographics Workshop on Visual Computing for Biology and Medicine (VCBM) N2 - Visualization grammars are gaining popularity as they allow visualization specialists and experienced users to quickly create static and interactive views. Existing grammars, however, mostly focus on abstract views, ignoring three-dimensional (3D) views, which are very important in fields such as natural sciences. We propose a generalized interaction grammar for the problem of coordinating heterogeneous view types, such as standard charts (e.g., based on Vega-Lite) and 3D anatomical views. An important aspect of our web-based framework is that user interactions with data items at various levels of detail can be systematically integrated and used to control the overall layout of the application workspace. With the help of a concise JSON-based specification of the intended workflow, we can handle complex interactive visual analysis scenarios. This enables rapid prototyping and iterative refinement of the visual analysis tool in collaboration with domain experts. We illustrate the usefulness of our framework in two real-world case studies from the field of neuroscience. Since the logic of the presented grammar-based approach for handling interactions between heterogeneous web-based views is free of any application specifics, it can also serve as a template for applications beyond biological research. Y1 - 2023 U6 - https://doi.org/10.2312/vcbm.20231218 ER - TY - JOUR A1 - Vohra, Sumit Kumar A1 - Herrera, Kristian A1 - Tavhelidse-Suck, Tinatini A1 - Knoblich, Simon A1 - Seleit, Ali A1 - Boulanger-Weill, Jonathan A1 - Chambule, Sydney A1 - Aspiras, Ariel A1 - Santoriello, Cristina A1 - Randlett, Owen A1 - Wittbrodt, Joachim A1 - Aulehla, Alexander A1 - Lichtman, Jeff W. A1 - Fishman, Mark A1 - Hege, Hans-Christian A1 - Baum, Daniel A1 - Engert, Florian A1 - Isoe, Yasuko T1 - Multi-species community platform for comparative neuroscience in teleost fish JF - bioRxiv N2 - Studying neural mechanisms in complementary model organisms from different ecological niches in the same animal class can leverage the comparative brain analysis at the cellular level. To advance such a direction, we developed a unified brain atlas platform and specialized tools that allowed us to quantitatively compare neural structures in two teleost larvae, medaka (Oryzias latipes) and zebrafish (Danio rerio). Leveraging this quantitative approach we found that most brain regions are similar but some subpopulations are unique in each species. Specifically, we confirmed the existence of a clear dorsal pallial region in the telencephalon in medaka lacking in zebrafish. Further, our approach allows for extraction of differentially expressed genes in both species, and for quantitative comparison of neural activity at cellular resolution. The web-based and interactive nature of this atlas platform will facilitate the teleost community’s research and its easy extensibility will encourage contributions to its continuous expansion. Y1 - 2024 U6 - https://doi.org/10.1101/2024.02.14.580400 ER -