TY - JOUR A1 - Hoppmann-Baum, Kai A1 - Hennings, Felix A1 - Lenz, Ralf A1 - Gotzes, Uwe A1 - Heinecke, Nina A1 - Spreckelsen, Klaus A1 - Koch, Thorsten T1 - Optimal Operation of Transient Gas Transport Networks JF - Optimization and Engineering N2 - In this paper, we describe an algorithmic framework for the optimal operation of transient gas transport networks consisting of a hierarchical MILP formulation together with a sequential linear programming inspired post-processing routine. Its implementation is part of the KOMPASS decision support system, which is currently used in an industrial setting. Real-world gas transport networks are controlled by operating complex pipeline intersection areas, which comprise multiple compressor units, regulators, and valves. In the following, we introduce the concept of network stations to model them. Thereby, we represent the technical capabilities of a station by hand-tailored artificial arcs and add them to network. Furthermore, we choose from a predefined set of flow directions for each network station and time step, which determines where the gas enters and leaves the station. Additionally, we have to select a supported simple state, which consists of two subsets of artificial arcs: Arcs that must and arcs that cannot be used. The goal is to determine a stable control of the network satisfying all supplies and demands. The pipeline intersections, that are represented by the network stations, were initially built centuries ago. Subsequently, due to updates, changes, and extensions, they evolved into highly complex and involved topologies. To extract their basic properties and to model them using computer-readable and optimizable descriptions took several years of effort. To support the dispatchers in controlling the network, we need to compute a continuously updated list of recommended measures. Our motivation for the model presented here is to make fast decisions on important transient global control parameters, i.e., how to route the flow and where to compress the gas. Detailed continuous and discrete technical control measures realizing them, which take all hardware details into account, are determined in a subsequent step. In this paper, we present computational results from the KOMPASS project using detailed real-world data. Y1 - 2020 U6 - https://doi.org/10.1007/s11081-020-09584-x VL - 22 SP - 735 EP - 781 ER - TY - GEN A1 - Hennings, Felix A1 - Petkovic, Milena A1 - Streubel, Tom T1 - On the Numerical Treatment of Interlaced Target Values - Modeling, Optimization and Simulation of Regulating Valves in Gas Networks N2 - Due to the current and foreseeable shifts in energy production, the trading and transport operations of gas will become more dynamic, volatile, and hence also less predictable. Therefore, computer-aided support in terms of rapid simulation and control optimization will further broaden its importance for gas network dispatching. In this paper, we aim to contribute and openly publish two new mathematical models for regulators, also referred to as control valves, which together with compressors make up the most complex and involved types of active elements in gas network infrastructures. They provide full direct control over gas networks but are in turn controlled via target values, also known as set-point values, themselves. Our models incorporate up to six dynamical target values to define desired transient states for the elements' local vicinity within the network. That is, each pair of every two target values defines a bounding box for the inlet pressure, outlet pressure as well as the passing mass flow of gas. In the proposed models, those target values are prioritized differently and are constantly in competition with each other, which can only be resolved dynamically at run-time of either a simulation or optimization process. Besides careful derivation, we compare simulation and optimization results with predictions of the commercial simulation tool SIMONE. T3 - ZIB-Report - 21-32 Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-85359 SN - 1438-0064 ER - TY - GEN A1 - Hennings, Felix T1 - Large-scale empirical study on the momentum equation's inertia term N2 - A common approach to reduce the Euler equations' complexity for the simulation and optimization of gas networks is to neglect small terms that contribute little to the overall equations. An example is the inertia term of the momentum equation since it is said to be of negligible size under real-world operating conditions. However, this justification has always only been based on experience or single sets of artificial data points. This study closes this gap by presenting a large-scale empirical evaluation of the absolute and relative size of the inertia term when operating a real-world gas network. Our data consists of three years of fine-granular state data of one of the largest gas networks in Europe, featuring over 6,000 pipes with a total length of over 10,000 km. We found that there are only 120 events in which a subnetwork consisting of multiple pipes has an inertia term of high significance for more than three minutes. On average, such an event occurs less often than once every ten days. Therefore, we conclude that the inertia term is indeed negligible for real-world transient gas network control problems. T3 - ZIB-Report - 21-08 Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-81881 SN - 1438-0064 ER - TY - JOUR A1 - Hennings, Felix T1 - Large-scale empirical study on the momentum equation's inertia term JF - Journal of Natural Gas Science and Engineering N2 - A common approach to reduce the Euler equations' complexity for the simulation and optimization of gas networks is to neglect small terms that contribute little to the overall equations. An example is the inertia term of the momentum equation, which is said to be of negligible size under real-world operating conditions. However, this justification has always only been based on experience or single sets of artificial data points. This study closes this gap by presenting a large-scale empirical evaluation of the absolute and relative size of the inertia term when operating a real-world gas network. Our data consists of three years of fine-granular state data of one of the largest gas networks in Europe, featuring over 6,000 pipes with a total length of over 10,000 km. We found that there are only 120 events in which a subnetwork consisting of multiple pipes has an inertia term of high significance for more than three minutes. On average, such an event occurs less often than once every ten days. Therefore, we conclude that the inertia term is indeed negligible for real-world transient gas network control problems. Y1 - 2021 U6 - https://doi.org/10.1016/j.jngse.2021.104153 VL - 95 PB - Elsevier ER - TY - JOUR A1 - Hoppmann-Baum, Kai A1 - Hennings, Felix A1 - Zittel, Janina A1 - Gotzes, Uwe A1 - Spreckelsen, Eva-Maria A1 - Spreckelsen, Klaus A1 - Koch, Thorsten T1 - An Optimization Approach for the Transient Control of Hydrogen Transport Networks JF - Mathematical Methods of Operations Research Y1 - 2021 IS - Special Issue on Energy Networks ER -