TY - JOUR A1 - Humpola, Jesco A1 - Serrano, Felipe T1 - Sufficient pruning conditions for MINLP in gas network design JF - EURO Journal on Computational Optimization N2 - One-quarter of Europe’s energy demand is provided by natural gas distributed through a vast pipeline network covering the whole of Europe. At a cost of 1 million Euros per kilometer the extension of the European pipeline network is already a multi-billion Euro business. Therefore, automatic planning tools that support the decision process are desired. We model the topology optimization problem in gas networks by a mixed-integer nonlinear program (MINLP). This gives rise to a so-called active transmission problem, a continuous nonlinear non-convex feasibility problem which emerges from the MINLP model by fixing all integral variables. We offer novel sufficient conditions for proving the infeasibility of this active transmission problem. These conditions can be expressed in the form of a mixed-integer program (MILP), i.e., the infeasibility of a non-convex continuous nonlinear program (NLP) can be certified by solving an MILP. This result provides an efficient pruning procedure in a branch-and-bound algorithm. Our computational results demonstrate a substantial speedup for the necessary computations. Y1 - 2017 U6 - https://doi.org/10.1007/s13675-016-0077-8 VL - 5 IS - 1-2 SP - 239 EP - 261 PB - Springer Berlin Heidelberg ER - TY - GEN A1 - Serrano, Felipe T1 - Visible points, the separation problem, and applications to MINLP N2 - In this paper we introduce a technique to produce tighter cutting planes for mixed-integer non-linear programs. Usually, a cutting plane is generated to cut off a specific infeasible point. The underlying idea is to use the infeasible point to restrict the feasible region in order to obtain a tighter domain. To ensure validity, we require that every valid cut separating the infeasible point from the restricted feasible region is still valid for the original feasible region. We translate this requirement in terms of the separation problem and the reverse polar. In particular, if the reverse polar of the restricted feasible region is the same as the reverse polar of the feasible region, then any cut valid for the restricted feasible region that \emph{separates} the infeasible point, is valid for the feasible region. We show that the reverse polar of the \emph{visible points} of the feasible region from the infeasible point coincides with the reverse polar of the feasible region. In the special where the feasible region is described by a single non-convex constraint intersected with a convex set we provide a characterization of the visible points. Furthermore, when the non-convex constraint is quadratic the characterization is particularly simple. We also provide an extended formulation for a relaxation of the visible points when the non-convex constraint is a general polynomial. Finally, we give some conditions under which for a given set there is an inclusion-wise smallest set, in some predefined family of sets, whose reverse polars coincide. T3 - ZIB-Report - 19-38 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-74016 SN - 1438-0064 ER - TY - JOUR A1 - Serrano, Felipe A1 - Schwarz, Robert A1 - Gleixner, Ambros T1 - On the relation between the extended supporting hyperplane algorithm and Kelley’s cutting plane algorithm JF - Journal of Global Optimization N2 - Recently, Kronqvist et al. (J Global Optim 64(2):249–272, 2016) rediscovered the supporting hyperplane algorithm of Veinott (Oper Res 15(1):147–152, 1967) and demonstrated its computational benefits for solving convex mixed integer nonlinear programs. In this paper we derive the algorithm from a geometric point of view. This enables us to show that the supporting hyperplane algorithm is equivalent to Kelley’s cutting plane algorithm (J Soc Ind Appl Math 8(4):703–712, 1960) applied to a particular reformulation of the problem. As a result, we extend the applicability of the supporting hyperplane algorithm to convex problems represented by a class of general, not necessarily convex nor differentiable, functions. Y1 - 2020 U6 - https://doi.org/10.1007/s10898-020-00906-y VL - 78 SP - 161 EP - 179 ER - TY - CHAP A1 - Müller, Benjamin A1 - Muñoz, Gonzalo A1 - Gasse, Maxime A1 - Gleixner, Ambros A1 - Lodi, Andrea A1 - Serrano, Felipe T1 - On Generalized Surrogate Duality in Mixed-Integer Nonlinear Programming T2 - Integer Programming and Combinatorial Optimization: 21th International Conference, IPCO 2020 N2 - The most important ingredient for solving mixed-integer nonlinear programs (MINLPs) to global epsilon-optimality with spatial branch and bound is a tight, computationally tractable relaxation. Due to both theoretical and practical considerations, relaxations of MINLPs are usually required to be convex. Nonetheless, current optimization solver can often successfully handle a moderate presence of nonconvexities, which opens the door for the use of potentially tighter nonconvex relaxations. In this work, we exploit this fact and make use of a nonconvex relaxation obtained via aggregation of constraints: a surrogate relaxation. These relaxations were actively studied for linear integer programs in the 70s and 80s, but they have been scarcely considered since. We revisit these relaxations in an MINLP setting and show the computational benefits and challenges they can have. Additionally, we study a generalization of such relaxation that allows for multiple aggregations simultaneously and present the first algorithm that is capable of computing the best set of aggregations. We propose a multitude of computational enhancements for improving its practical performance and evaluate the algorithm’s ability to generate strong dual bounds through extensive computational experiments. Y1 - 2020 U6 - https://doi.org/10.1007/978-3-030-45771-6_25 SP - 322 EP - 337 ER - TY - GEN A1 - Lenz, Ralf A1 - Serrano, Felipe T1 - Tight Convex Relaxations for the Expansion Planning Problem N2 - Secure energy transport is considered as highly relevant for the basic infrastructure of nowadays society and economy. To satisfy increasing demands and to handle more diverse transport situations, operators of energy networks regularly expand the capacity of their network by building new network elements, known as the expansion planning problem. A key constraint function in expansion planning problems is a nonlinear and nonconvex potential loss function. In order to improve the algorithmic performance of state-of-the-art MINLP solvers, this paper presents an algebraic description for the convex envelope of this function. Through a thorough computational study, we show that this tighter relaxation tremendously improve the performance of the MINLP solver SCIP on a large test set of practically relevant instances for the expansion planning problem. In particular, the results show that our achievements lead to an improvement of the solver performance for a development version by up to 58%. T3 - ZIB-Report - 21-05 KW - Convex envelopes KW - Mixed-Integer Nonlinear Programming KW - Expansion planning of energy networks Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-81459 SN - 1438-0064 ER - TY - CHAP A1 - Serrano, Felipe A1 - Muñoz, Gonzalo T1 - Maximal Quadratic-Free Sets T2 - Integer Programming and Combinatorial Optimization: 21th International Conference, IPCO 2020 N2 - The intersection cut paradigm is a powerful framework that facilitates the generation of valid linear inequalities, or cutting planes, for a potentially complex set S. The key ingredients in this construction are a simplicial conic relaxation of S and an S-free set: a convex zone whose interior does not intersect S. Ideally, such S-free set would be maximal inclusion-wise, as it would generate a deeper cutting plane. However, maximality can be a challenging goal in general. In this work, we show how to construct maximal S-free sets when S is defined as a general quadratic inequality. Our maximal S-free sets are such that efficient separation of a vertex in LP-based approaches to quadratically constrained problems is guaranteed. To the best of our knowledge, this work is the first to provide maximal quadratic-free sets. Y1 - 2020 U6 - https://doi.org/10.1007/978-3-030-45771-6_24 SP - 307 EP - 321 ER - TY - CHAP A1 - Serrano, Felipe T1 - Intersection cuts for factorable MINLP T2 - A. Lodi, V. Nagarajan (eds), Integer Programming and Combinatorial Optimization: 20th International Conference, IPCO 2019 N2 - Given a factorable function f, we propose a procedure that constructs a concave underestimor of f that is tight at a given point. These underestimators can be used to generate intersection cuts. A peculiarity of these underestimators is that they do not rely on a bounded domain. We propose a strengthening procedure for the intersection cuts that exploits the bounds of the domain. Finally, we propose an extension of monoidal strengthening to take advantage of the integrality of the non-basic variables. Y1 - 2019 U6 - https://doi.org/10.1007/978-3-030-17953-3_29 VL - 11480 SP - 385 EP - 398 ER - TY - GEN A1 - Serrano, Felipe A1 - Schwarz, Robert A1 - Gleixner, Ambros T1 - On the Relation between the Extended Supporting Hyperplane Algorithm and Kelley’s Cutting Plane Algorithm N2 - Recently, Kronqvist et al. (2016) rediscovered the supporting hyperplane algorithm of Veinott (1967) and demonstrated its computational benefits for solving convex mixed-integer nonlinear programs. In this paper we derive the algorithm from a geometric point of view. This enables us to show that the supporting hyperplane algorithm is equivalent to Kelley's cutting plane algorithm applied to a particular reformulation of the problem. As a result, we extend the applicability of the supporting hyperplane algorithm to convex problems represented by general, not necessarily convex, differentiable functions that satisfy a mild condition. T3 - ZIB-Report - 19-18 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-73253 SN - 1438-0064 ER - TY - GEN A1 - Serrano, Felipe T1 - Intersection cuts for factorable MINLP N2 - Given a factorable function f, we propose a procedure that constructs a concave underestimor of f that is tight at a given point. These underestimators can be used to generate intersection cuts. A peculiarity of these underestimators is that they do not rely on a bounded domain. We propose a strengthening procedure for the intersection cuts that exploits the bounds of the domain. Finally, we propose an extension of monoidal strengthening to take advantage of the integrality of the non-basic variables. T3 - ZIB-Report - 18-59 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-71105 SN - 1438-0064 ER - TY - JOUR A1 - Müller, Benjamin A1 - Serrano, Felipe A1 - Gleixner, Ambros T1 - Using two-dimensional Projections for Stronger Separation and Propagation of Bilinear Terms JF - SIAM Journal on Optimization N2 - One of the most fundamental ingredients in mixed-integer nonlinear programming solvers is the well- known McCormick relaxation for a product of two variables x and y over a box-constrained domain. The starting point of this paper is the fact that the convex hull of the graph of xy can be much tighter when computed over a strict, non-rectangular subset of the box. In order to exploit this in practice, we propose to compute valid linear inequalities for the projection of the feasible region onto the x-y-space by solving a sequence of linear programs akin to optimization-based bound tightening. These valid inequalities allow us to employ results from the literature to strengthen the classical McCormick relaxation. As a consequence, we obtain a stronger convexification procedure that exploits problem structure and can benefit from supplementary information obtained during the branch-and bound algorithm such as an objective cutoff. We complement this by a new bound tightening procedure that efficiently computes the best possible bounds for x, y, and xy over the available projections. Our computational evaluation using the academic solver SCIP exhibit that the proposed methods are applicable to a large portion of the public test library MINLPLib and help to improve performance significantly. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-72767 VL - 30 IS - 2 SP - 1339 EP - 1365 ER - TY - GEN A1 - Serrano, Felipe A1 - Muñoz, Gonzalo T1 - Maximal Quadratic-Free Sets N2 - The intersection cut paradigm is a powerful framework that facilitates the generation of valid linear inequalities, or cutting planes, for a potentially complex set S. The key ingredients in this construction are a simplicial conic relaxation of S and an S-free set: a convex zone whose interior does not intersect S. Ideally, such S-free set would be maximal inclusion-wise, as it would generate a deeper cutting plane. However, maximality can be a challenging goal in general. In this work, we show how to construct maximal S-free sets when S is defined as a general quadratic inequality. Our maximal S-free sets are such that efficient separation of a vertex in LP-based approaches to quadratically constrained problems is guaranteed. To the best of our knowledge, this work is the first to provide maximal quadratic-free sets. T3 - ZIB-Report - 19-56 KW - MINLP KW - Quadratic Optimization KW - Cutting planes Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-76922 SN - 1438-0064 ER - TY - GEN A1 - Turner, Mark A1 - Koch, Thorsten A1 - Serrano, Felipe A1 - Winkler, Michael T1 - Adaptive Cut Selection in Mixed-Integer Linear Programming N2 - Cut selection is a subroutine used in all modern mixed-integer linear programming solvers with the goal of selecting a subset of generated cuts that induce optimal solver performance. These solvers have millions of parameter combinations, and so are excellent candidates for parameter tuning. Cut selection scoring rules are usually weighted sums of different measurements, where the weights are parameters. We present a parametric family of mixed-integer linear programs together with infinitely many family-wide valid cuts. Some of these cuts can induce integer optimal solutions directly after being applied, while others fail to do so even if an infinite amount are applied. We show for a specific cut selection rule, that any finite grid search of the parameter space will always miss all parameter values, which select integer optimal inducing cuts in an infinite amount of our problems. We propose a variation on the design of existing graph convolutional neural networks, adapting them to learn cut selection rule parameters. We present a reinforcement learning framework for selecting cuts, and train our design using said framework over MIPLIB 2017. Our framework and design show that adaptive cut selection does substantially improve performance over a diverse set of instances, but that finding a single function describing such a rule is difficult. Code for reproducing all experiments is available at https://github.com/Opt-Mucca/Adaptive-Cutsel-MILP. T3 - ZIB-Report - 22-04 KW - cut selection KW - mixed-integer linear programming KW - reinforcement learning Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-86055 SN - 1438-0064 ER - TY - GEN A1 - Müller, Benjamin A1 - Muñoz, Gonzalo A1 - Gasse, Maxime A1 - Gleixner, Ambros A1 - Lodi, Andrea A1 - Serrano, Felipe T1 - On Generalized Surrogate Duality in Mixed-Integer Nonlinear Programming N2 - The most important ingredient for solving mixed-integer nonlinear programs (MINLPs) to global epsilon-optimality with spatial branch and bound is a tight, computationally tractable relaxation. Due to both theoretical and practical considerations, relaxations of MINLPs are usually required to be convex. Nonetheless, current optimization solver can often successfully handle a moderate presence of nonconvexities, which opens the door for the use of potentially tighter nonconvex relaxations. In this work, we exploit this fact and make use of a nonconvex relaxation obtained via aggregation of constraints: a surrogate relaxation. These relaxations were actively studied for linear integer programs in the 70s and 80s, but they have been scarcely considered since. We revisit these relaxations in an MINLP setting and show the computational benefits and challenges they can have. Additionally, we study a generalization of such relaxation that allows for multiple aggregations simultaneously and present the first algorithm that is capable of computing the best set of aggregations. We propose a multitude of computational enhancements for improving its practical performance and evaluate the algorithm’s ability to generate strong dual bounds through extensive computational experiments. T3 - ZIB-Report - 19-55 KW - surrogate relaxation KW - MINLP KW - nonconvex optimization Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-75179 SN - 1438-0064 ER - TY - GEN A1 - Müller, Benjamin A1 - Serrano, Felipe A1 - Gleixner, Ambros T1 - Using two-dimensional Projections for Stronger Separation and Propagation of Bilinear Terms N2 - One of the most fundamental ingredients in mixed-integer nonlinear programming solvers is the well- known McCormick relaxation for a product of two variables x and y over a box-constrained domain. The starting point of this paper is the fact that the convex hull of the graph of xy can be much tighter when computed over a strict, non-rectangular subset of the box. In order to exploit this in practice, we propose to compute valid linear inequalities for the projection of the feasible region onto the x-y-space by solving a sequence of linear programs akin to optimization-based bound tightening. These valid inequalities allow us to employ results from the literature to strengthen the classical McCormick relaxation. As a consequence, we obtain a stronger convexification procedure that exploits problem structure and can benefit from supplementary information obtained during the branch-and bound algorithm such as an objective cutoff. We complement this by a new bound tightening procedure that efficiently computes the best possible bounds for x, y, and xy over the available projections. Our computational evaluation using the academic solver SCIP exhibit that the proposed methods are applicable to a large portion of the public test library MINLPLib and help to improve performance significantly. T3 - ZIB-Report - 19-15 KW - mixed-integer quadratically constrained programs KW - nonconvex KW - global optimization KW - separation KW - propagation KW - projection KW - bilinear terms Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-72759 SN - 1438-0064 ER - TY - JOUR A1 - Lenz, Ralf A1 - Serrano, Felipe T1 - Tight Convex Relaxations for the Expansion Planning Problem JF - Journal of Optimization Theory and Applications N2 - Secure energy transport is considered as highly relevant for the basic infrastructure of nowadays society and economy. To satisfy increasing demands and to handle more diverse transport situations, operators of energy networks regularly expand the capacity of their network by building new network elements, known as the expansion planning problem. A key constraint function in expansion planning problems is a nonlinear and nonconvex potential loss function. In order to improve the algorithmic performance of state-of-the-art MINLP solvers, this paper presents an algebraic description for the convex envelope of this function. Through a thorough computational study, we show that this tighter relaxation tremendously improves the performance of the MINLP solver SCIP on a large test set of practically relevant instances for the expansion planning problem. In particular, the results show that our achievements lead to an improvement of the solver performance for a development version by up to 58%. Y1 - 2022 U6 - https://doi.org/10.1007/s10957-022-02029-8 VL - 194 SP - 325 EP - 352 ER - TY - GEN A1 - Maher, Stephen J. A1 - Miltenberger, Matthias A1 - Pedroso, João Pedro A1 - Rehfeldt, Daniel A1 - Schwarz, Robert A1 - Serrano, Felipe T1 - PySCIPOpt: Mathematical Programming in Python with the SCIP Optimization Suite N2 - SCIP is a solver for a wide variety of mathematical optimization problems. It is written in C and extendable due to its plug-in based design. However, dealing with all C specifics when extending SCIP can be detrimental to development and testing of new ideas. This paper attempts to provide a remedy by introducing PySCIPOpt, a Python interface to SCIP that enables users to write new SCIP code entirely in Python. We demonstrate how to intuitively model mixed-integer linear and quadratic optimization problems and moreover provide examples on how new Python plug-ins can be added to SCIP. T3 - ZIB-Report - 16-64 KW - SCIP, Mathematical optimization, Python, Modeling Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-61348 SN - 1438-0064 ER - TY - CHAP A1 - Maher, Stephen J. A1 - Miltenberger, Matthias A1 - Pedroso, João Pedro A1 - Rehfeldt, Daniel A1 - Schwarz, Robert A1 - Serrano, Felipe T1 - PySCIPOpt: Mathematical Programming in Python with the SCIP Optimization Suite T2 - Mathematical Software – ICMS 2016 N2 - SCIP is a solver for a wide variety of mathematical optimization problems. It is written in C and extendable due to its plug-in based design. However, dealing with all C specifics when extending SCIP can be detrimental to development and testing of new ideas. This paper attempts to provide a remedy by introducing PySCIPOpt, a Python interface to SCIP that enables users to write new SCIP code entirely in Python. We demonstrate how to intuitively model mixed-integer linear and quadratic optimization problems and moreover provide examples on how new Python plug-ins can be added to SCIP. Y1 - 2016 U6 - https://doi.org/10.1007/978-3-319-42432-3_37 VL - 9725 SP - 301 EP - 307 PB - Springer ER - TY - GEN A1 - Chmiela, Antonia A1 - Muñoz, Gonzalo A1 - Serrano, Felipe T1 - On the implementation and strengthening of intersection cuts for QCQPs N2 - The generation of strong linear inequalities for QCQPs has been recently tackled by a number of authors using the intersection cut paradigm - a highly studied tool in integer programming whose flexibility has triggered these renewed efforts in non-linear settings. In this work, we consider intersection cuts using the recently proposed construction of maximal quadratic-free sets. Using these sets, we derive closed-form formulas to compute intersection cuts which allow for quick cut-computations by simply plugging-in parameters associated to an arbitrary quadratic inequality being violated by a vertex of an LP relaxation. Additionally, we implement a cut-strengthening procedure that dates back to Glover and evaluate these techniques with extensive computational experiments. KW - Intersection cuts KW - QCQPs KW - Quadratic-free sets Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-79994 ER - TY - CHAP A1 - Chmiela, Antonia A1 - Muñoz, Gonzalo A1 - Serrano, Felipe T1 - On the implementation and strengthening of intersection cuts for QCQPs T2 - Integer Programming and Combinatorial Optimization: 22nd International Conference, IPCO 2021 N2 - The generation of strong linear inequalities for QCQPs has been recently tackled by a number of authors using the intersection cut paradigm - a highly studied tool in integer programming whose flexibility has triggered these renewed efforts in non-linear settings. In this work, we consider intersection cuts using the recently proposed construction of maximal quadratic-free sets. Using these sets, we derive closed-form formulas to compute intersection cuts which allow for quick cut-computations by simply plugging-in parameters associated to an arbitrary quadratic inequality being violated by a vertex of an LP relaxation. Additionally, we implement a cut-strengthening procedure that dates back to Glover and evaluate these techniques with extensive computational experiments. Y1 - 2021 U6 - https://doi.org/10.1007/978-3-030-73879-2_10 VL - 22 SP - 134 EP - 147 ER - TY - GEN A1 - Bestuzheva, Ksenia A1 - Chmiela, Antonia A1 - Müller, Benjamin A1 - Serrano, Felipe A1 - Vigerske, Stefan A1 - Wegscheider, Fabian T1 - Global Optimization of Mixed-Integer Nonlinear Programs with SCIP 8.0 N2 - For over ten years, the constraint integer programming framework SCIP has been extended by capabilities for the solution of convex and nonconvex mixed-integer nonlinear programs (MINLPs). With the recently published version~8.0, these capabilities have been largely reworked and extended. This paper discusses the motivations for recent changes and provides an overview of features that are particular to MINLP solving in SCIP. Further, difficulties in benchmarking global MINLP solvers are discussed and a comparison with several state-of-the-art global MINLP solvers is provided. T3 - ZIB-Report - 23-01 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-89348 SN - 1438-0064 ER - TY - JOUR A1 - Turner, Mark A1 - Koch, Thorsten A1 - Serrano, Felipe A1 - Winkler, Michael T1 - Adaptive Cut Selection in Mixed-Integer Linear Programming JF - Open Journal of Mathematical Optimization N2 - Cutting plane selection is a subroutine used in all modern mixed-integer linear programming solvers with the goal of selecting a subset of generated cuts that induce optimal solver performance. These solvers have millions of parameter combinations, and so are excellent candidates for parameter tuning. Cut selection scoring rules are usually weighted sums of different measurements, where the weights are parameters. We present a parametric family of mixed-integer linear programs together with infinitely many family-wide valid cuts. Some of these cuts can induce integer optimal solutions directly after being applied, while others fail to do so even if an infinite amount are applied. We show for a specific cut selection rule, that any finite grid search of the parameter space will always miss all parameter values, which select integer optimal inducing cuts in an infinite amount of our problems. We propose a variation on the design of existing graph convolutional neural networks, adapting them to learn cut selection rule parameters. We present a reinforcement learning framework for selecting cuts, and train our design using said framework over MIPLIB 2017 and a neural network verification data set. Our framework and design show that adaptive cut selection does substantially improve performance over a diverse set of instances, but that finding a single function describing such a rule is difficult. Code for reproducing all experiments is available at https://github.com/Opt-Mucca/Adaptive-Cutsel-MILP. Y1 - 2023 U6 - https://doi.org/10.5802/ojmo.25 VL - 4 SP - 5 ER - TY - CHAP A1 - Chmiela, Antonia A1 - Muñoz, Gonzalo A1 - Serrano, Felipe T1 - Monoidal strengthening and unique lifting in MIQCPs T2 - Integer Programming and Combinatorial Optimization. IPCO 2023. N2 - Using the recently proposed maximal quadratic-free sets and the well-known monoidal strengthening procedure, we show how to improve inter- section cuts for quadratically-constrained optimization problems by exploiting integrality requirements. We provide an explicit construction that allows an efficient implementation of the strengthened cuts along with computational results showing their improvements over the standard intersection cuts. We also show that, in our setting, there is unique lifting which implies that our strengthening procedure is generating the best possible cut coefficients for the integer variables. Y1 - 2023 U6 - https://doi.org/10.1007/978-3-031-32726-1_7 VL - 13904 SP - 87 EP - 99 ER - TY - JOUR A1 - Müller, Benjamin A1 - Muñoz, Gonzalo A1 - Gasse, Maxime A1 - Gleixner, Ambros A1 - Lodi, Andrea A1 - Serrano, Felipe T1 - On generalized surrogate duality in mixed-integer nonlinear programming JF - Mathematical Programming N2 - The most important ingredient for solving mixed-integer nonlinear programs (MINLPs) to global ϵ-optimality with spatial branch and bound is a tight, computationally tractable relaxation. Due to both theoretical and practical considerations, relaxations of MINLPs are usually required to be convex. Nonetheless, current optimization solvers can often successfully handle a moderate presence of nonconvexities, which opens the door for the use of potentially tighter nonconvex relaxations. In this work, we exploit this fact and make use of a nonconvex relaxation obtained via aggregation of constraints: a surrogate relaxation. These relaxations were actively studied for linear integer programs in the 70s and 80s, but they have been scarcely considered since. We revisit these relaxations in an MINLP setting and show the computational benefits and challenges they can have. Additionally, we study a generalization of such relaxation that allows for multiple aggregations simultaneously and present the first algorithm that is capable of computing the best set of aggregations. We propose a multitude of computational enhancements for improving its practical performance and evaluate the algorithm’s ability to generate strong dual bounds through extensive computational experiments. Y1 - 2022 U6 - https://doi.org/10.1007/s10107-021-01691-6 VL - 192 IS - 1 SP - 89 EP - 118 ER - TY - GEN A1 - Maher, Stephen J. A1 - Fischer, Tobias A1 - Gally, Tristan A1 - Gamrath, Gerald A1 - Gleixner, Ambros A1 - Gottwald, Robert Lion A1 - Hendel, Gregor A1 - Koch, Thorsten A1 - Lübbecke, Marco A1 - Miltenberger, Matthias A1 - Müller, Benjamin A1 - Pfetsch, Marc A1 - Puchert, Christian A1 - Rehfeldt, Daniel A1 - Schenker, Sebastian A1 - Schwarz, Robert A1 - Serrano, Felipe A1 - Shinano, Yuji A1 - Weninger, Dieter A1 - Witt, Jonas T. A1 - Witzig, Jakob T1 - The SCIP Optimization Suite 4.0 N2 - The SCIP Optimization Suite is a powerful collection of optimization software that consists of the branch-cut-and-price framework and mixed-integer programming solver SCIP, the linear programming solver SoPlex, the modeling language Zimpl, the parallelization framework UG, and the generic branch-cut-and-price solver GCG. Additionally, it features the extensions SCIP-Jack for solving Steiner tree problems, PolySCIP for solving multi-objective problems, and SCIP-SDP for solving mixed-integer semidefinite programs. The SCIP Optimization Suite has been continuously developed and has now reached version 4.0. The goal of this report is to present the recent changes to the collection. We not only describe the theoretical basis, but focus on implementation aspects and their computational consequences. T3 - ZIB-Report - 17-12 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-62170 SN - 1438-0064 ER - TY - GEN A1 - Gamrath, Gerald A1 - Fischer, Tobias A1 - Gally, Tristan A1 - Gleixner, Ambros A1 - Hendel, Gregor A1 - Koch, Thorsten A1 - Maher, Stephen J. A1 - Miltenberger, Matthias A1 - Müller, Benjamin A1 - Pfetsch, Marc A1 - Puchert, Christian A1 - Rehfeldt, Daniel A1 - Schenker, Sebastian A1 - Schwarz, Robert A1 - Serrano, Felipe A1 - Shinano, Yuji A1 - Vigerske, Stefan A1 - Weninger, Dieter A1 - Winkler, Michael A1 - Witt, Jonas T. A1 - Witzig, Jakob T1 - The SCIP Optimization Suite 3.2 N2 - The SCIP Optimization Suite is a software toolbox for generating and solving various classes of mathematical optimization problems. Its major components are the modeling language ZIMPL, the linear programming solver SoPlex, the constraint integer programming framework and mixed-integer linear and nonlinear programming solver SCIP, the UG framework for parallelization of branch-and-bound-based solvers, and the generic branch-cut-and-price solver GCG. It has been used in many applications from both academia and industry and is one of the leading non-commercial solvers. This paper highlights the new features of version 3.2 of the SCIP Optimization Suite. Version 3.2 was released in July 2015. This release comes with new presolving steps, primal heuristics, and branching rules within SCIP. In addition, version 3.2 includes a reoptimization feature and improved handling of quadratic constraints and special ordered sets. SoPlex can now solve LPs exactly over the rational number and performance improvements have been achieved by exploiting sparsity in more situations. UG has been tested successfully on 80,000 cores. A major new feature of UG is the functionality to parallelize a customized SCIP solver. GCG has been enhanced with a new separator, new primal heuristics, and improved column management. Finally, new and improved extensions of SCIP are presented, namely solvers for multi-criteria optimization, Steiner tree problems, and mixed-integer semidefinite programs. T3 - ZIB-Report - 15-60 KW - mixed-integer linear and nonlinear programming KW - MIP solver KW - MINLP solver KW - linear programming KW - LP solver KW - simplex method KW - modeling KW - parallel branch-and-bound KW - branch-cut-and-price framework KW - generic column generation KW - Steiner tree solver KW - multi-criteria optimization KW - mixed-integer semidefinite programming Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-57675 SN - 1438-0064 ER - TY - JOUR A1 - Bestuzheva, Ksenia A1 - Chmiela, Antonia A1 - Müller, Benjamin A1 - Serrano, Felipe A1 - Vigerske, Stefan A1 - Wegscheider, Fabian T1 - Global Optimization of Mixed-Integer Nonlinear Programs with SCIP 8.0 JF - Journal of Global Optimization N2 - For over ten years, the constraint integer programming framework SCIP has been extended by capabilities for the solution of convex and nonconvex mixed-integer nonlinear programs (MINLPs). With the recently published version 8.0, these capabilities have been largely reworked and extended. This paper discusses the motivations for recent changes and provides an overview of features that are particular to MINLP solving in SCIP. Further, difficulties in benchmarking global MINLP solvers are discussed and a comparison with several state-of-the-art global MINLP solvers is provided. Y1 - 2023 U6 - https://doi.org/10.1007/s10898-023-01345-1 ER - TY - JOUR A1 - Chmiela, Antonia A1 - Muñoz, Gonzalo A1 - Serrano, Felipe T1 - On the implementation and strengthening of intersection cuts for QCQPs JF - Mathematical Programming B Y1 - 2023 U6 - https://doi.org/10.1007/s10107-022-01808-5 VL - 197 SP - 549 EP - 586 ER - TY - GEN A1 - Bestuzheva, Ksenia A1 - Besançon, Mathieu A1 - Chen, Wei-Kun A1 - Chmiela, Antonia A1 - Donkiewicz, Tim A1 - van Doornmalen, Jasper A1 - Eifler, Leon A1 - Gaul, Oliver A1 - Gamrath, Gerald A1 - Gleixner, Ambros A1 - Gottwald, Leona A1 - Graczyk, Christoph A1 - Halbig, Katrin A1 - Hoen, Alexander A1 - Hojny, Christopher A1 - van der Hulst, Rolf A1 - Koch, Thorsten A1 - Lübbecke, Marco A1 - Maher, Stephen J. A1 - Matter, Frederic A1 - Mühmer, Erik A1 - Müller, Benjamin A1 - Pfetsch, Marc E. A1 - Rehfeldt, Daniel A1 - Schlein, Steffan A1 - Schlösser, Franziska A1 - Serrano, Felipe A1 - Shinano, Yuji A1 - Sofranac, Boro A1 - Turner, Mark A1 - Vigerske, Stefan A1 - Wegscheider, Fabian A1 - Wellner, Philipp A1 - Weninger, Dieter A1 - Witzig, Jakob T1 - The SCIP Optimization Suite 8.0 N2 - The SCIP Optimization Suite provides a collection of software packages for mathematical optimization centered around the constraint integer programming framework SCIP. This paper discusses enhancements and extensions contained in version 8.0 of the SCIP Optimization Suite. Major updates in SCIP include improvements in symmetry handling and decomposition algorithms, new cutting planes, a new plugin type for cut selection, and a complete rework of the way nonlinear constraints are handled. Additionally, SCIP 8.0 now supports interfaces for Julia as well as Matlab. Further, UG now includes a unified framework to parallelize all solvers, a utility to analyze computational experiments has been added to GCG, dual solutions can be postsolved by PaPILO, new heuristics and presolving methods were added to SCIP-SDP, and additional problem classes and major performance improvements are available in SCIP-Jack. T3 - ZIB-Report - 21-41 KW - Constraint integer programming KW - Linear programming KW - Mixed-integer linear programming KW - Mixed-integer nonlinear programming KW - Optimization solver KW - Branch-and-cut KW - Branch-and-price KW - Column generation KW - Parallelization KW - Mixed-integer semidefinite programming Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-85309 SN - 1438-0064 ER - TY - GEN A1 - Gamrath, Gerald A1 - Anderson, Daniel A1 - Bestuzheva, Ksenia A1 - Chen, Wei-Kun A1 - Eifler, Leon A1 - Gasse, Maxime A1 - Gemander, Patrick A1 - Gleixner, Ambros A1 - Gottwald, Leona A1 - Halbig, Katrin A1 - Hendel, Gregor A1 - Hojny, Christopher A1 - Koch, Thorsten A1 - Le Bodic, Pierre A1 - Maher, Stephen J. A1 - Matter, Frederic A1 - Miltenberger, Matthias A1 - Mühmer, Erik A1 - Müller, Benjamin A1 - Pfetsch, Marc A1 - Schlösser, Franziska A1 - Serrano, Felipe A1 - Shinano, Yuji A1 - Tawfik, Christine A1 - Vigerske, Stefan A1 - Wegscheider, Fabian A1 - Weninger, Dieter A1 - Witzig, Jakob T1 - The SCIP Optimization Suite 7.0 N2 - The SCIP Optimization Suite provides a collection of software packages for mathematical optimization centered around the constraint integer programming frame- work SCIP. This paper discusses enhancements and extensions contained in version 7.0 of the SCIP Optimization Suite. The new version features the parallel presolving library PaPILO as a new addition to the suite. PaPILO 1.0 simplifies mixed-integer linear op- timization problems and can be used stand-alone or integrated into SCIP via a presolver plugin. SCIP 7.0 provides additional support for decomposition algorithms. Besides im- provements in the Benders’ decomposition solver of SCIP, user-defined decomposition structures can be read, which are used by the automated Benders’ decomposition solver and two primal heuristics. Additionally, SCIP 7.0 comes with a tree size estimation that is used to predict the completion of the overall solving process and potentially trigger restarts. Moreover, substantial performance improvements of the MIP core were achieved by new developments in presolving, primal heuristics, branching rules, conflict analysis, and symmetry handling. Last, not least, the report presents updates to other components and extensions of the SCIP Optimization Suite, in particular, the LP solver SoPlex and the mixed-integer semidefinite programming solver SCIP-SDP. T3 - ZIB-Report - 20-10 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-78023 SN - 1438-0064 ER - TY - GEN A1 - Bolusani, Suresh A1 - Besançon, Mathieu A1 - Bestuzheva, Ksenia A1 - Chmiela, Antonia A1 - Dionísio, João A1 - Donkiewicz, Tim A1 - van Doornmalen, Jasper A1 - Eifler, Leon A1 - Ghannam, Mohammed A1 - Gleixner, Ambros A1 - Graczyk, Christoph A1 - Halbig, Katrin A1 - Hedtke, Ivo A1 - Hoen, Alexander A1 - Hojny, Christopher A1 - van der Hulst, Rolf A1 - Kamp, Dominik A1 - Koch, Thorsten A1 - Kofler, Kevin A1 - Lentz, Jurgen A1 - Manns, Julian A1 - Mexi, Gioni A1 - Mühmer, Erik A1 - E. Pfetsch, Marc A1 - Schlösser, Franziska A1 - Serrano, Felipe A1 - Shinano, Yuji A1 - Turner, Mark A1 - Vigerske, Stefan A1 - Weninger, Dieter A1 - Xu, Liding T1 - The SCIP Optimization Suite 9.0 N2 - The SCIP Optimization Suite provides a collection of software packages for mathematical optimization, centered around the constraint integer programming framework SCIP. This report discusses the enhancements and extensions included in the SCIP Optimization Suite 9.0. The updates in SCIP 9.0 include improved symmetry handling, additions and improvements of nonlinear handlers and primal heuristics, a new cut generator and two new cut selection schemes, a new branching rule, a new LP interface, and several bug fixes. The SCIP Optimization Suite 9.0 also features new Rust and C++ interfaces for SCIP, new Python interface for SoPlex, along with enhancements to existing interfaces. The SCIP Optimization Suite 9.0 also includes new and improved features in the LP solver SoPlex, the presolving library PaPILO, the parallel framework UG, the decomposition framework GCG, and the SCIP extension SCIP-SDP. These additions and enhancements have resulted in an overall performance improvement of SCIP in terms of solving time, number of nodes in the branch-and-bound tree, as well as the reliability of the solver. T3 - ZIB-Report - 24-02-29 KW - Constraint integer programming KW - Linear programming KW - Mixed-integer linear programming KW - Mixed-integer nonlinear programming KW - Optimization solver KW - Branch-and-cut KW - Branch-and-price KW - Column generation KW - Parallelization KW - Mixed-integer semidefinite programming Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-95528 SN - 1438-0064 ER - TY - JOUR A1 - Bestuzheva, Ksenia A1 - Besançon, Mathieu A1 - Chen, Wei-Kun A1 - Chmiela, Antonia A1 - Donkiewicz, Tim A1 - Doornmalen, Jasper A1 - Eifler, Leon A1 - Gaul, Oliver A1 - Gamrath, Gerald A1 - Gleixner, Ambros A1 - Gottwald, Leona A1 - Graczyk, Christoph A1 - Halbig, Katrin A1 - Hoen, Alexander A1 - Hojny, Christopher A1 - Hulst, Rolf A1 - Koch, Thorsten A1 - Lübbecke, Marco A1 - Maher, Stephen J. A1 - Matter, Frederic A1 - Mühmer, Erik A1 - Müller, Benjamin A1 - Pfetsch, Marc A1 - Rehfeldt, Daniel A1 - Schlein, Steffan A1 - Schlösser, Franziska A1 - Serrano, Felipe A1 - Shinano, Yuji A1 - Sofranac, Boro A1 - Turner, Mark A1 - Vigerske, Stefan A1 - Wegscheider, Fabian A1 - Wellner, Philipp A1 - Weninger, Dieter A1 - Witzig, Jakob T1 - Enabling research through the SCIP optimization suite 8.0 JF - ACM Transactions on Mathematical Software N2 - The SCIP Optimization Suite provides a collection of software packages for mathematical optimization centered around the constraint integer programming framework SCIP. The focus of this article is on the role of the SCIP Optimization Suite in supporting research. SCIP’s main design principles are discussed, followed by a presentation of the latest performance improvements and developments in version 8.0, which serve both as examples of SCIP’s application as a research tool and as a platform for further developments. Furthermore, this article gives an overview of interfaces to other programming and modeling languages, new features that expand the possibilities for user interaction with the framework, and the latest developments in several extensions built upon SCIP. Y1 - 2023 U6 - https://doi.org/10.1145/3585516 VL - 49 IS - 2 SP - 1 EP - 21 ER - TY - GEN A1 - Gleixner, Ambros A1 - Eifler, Leon A1 - Gally, Tristan A1 - Gamrath, Gerald A1 - Gemander, Patrick A1 - Gottwald, Robert Lion A1 - Hendel, Gregor A1 - Hojny, Christopher A1 - Koch, Thorsten A1 - Miltenberger, Matthias A1 - Müller, Benjamin A1 - Pfetsch, Marc A1 - Puchert, Christian A1 - Rehfeldt, Daniel A1 - Schlösser, Franziska A1 - Serrano, Felipe A1 - Shinano, Yuji A1 - Viernickel, Jan Merlin A1 - Vigerske, Stefan A1 - Weninger, Dieter A1 - Witt, Jonas T. A1 - Witzig, Jakob T1 - The SCIP Optimization Suite 5.0 N2 - This article describes new features and enhanced algorithms made available in version 5.0 of the SCIP Optimization Suite. In its central component, the constraint integer programming solver SCIP, remarkable performance improvements have been achieved for solving mixed-integer linear and nonlinear programs. On MIPs, SCIP 5.0 is about 41 % faster than SCIP 4.0 and over twice as fast on instances that take at least 100 seconds to solve. For MINLP, SCIP 5.0 is about 17 % faster overall and 23 % faster on instances that take at least 100 seconds to solve. This boost is due to algorithmic advances in several parts of the solver such as cutting plane generation and management, a new adaptive coordination of large neighborhood search heuristics, symmetry handling, and strengthened McCormick relaxations for bilinear terms in MINLPs. Besides discussing the theoretical background and the implementational aspects of these developments, the report describes recent additions for the other software packages connected to SCIP, in particular for the LP solver SoPlex, the Steiner tree solver SCIP-Jack, the MISDP solver SCIP-SDP, and the parallelization framework UG. T3 - ZIB-Report - 17-61 KW - constraint integer programming KW - linear programming KW - mixed-integer linear programming KW - mixed-integer nonlinear programming KW - optimization solver KW - branch-and-cut KW - branch-and-price KW - column generation framework KW - parallelization KW - mixed-integer semidefinite programming KW - Steiner tree optimization Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-66297 SN - 1438-0064 ER - TY - GEN A1 - Gleixner, Ambros A1 - Bastubbe, Michael A1 - Eifler, Leon A1 - Gally, Tristan A1 - Gamrath, Gerald A1 - Gottwald, Robert Lion A1 - Hendel, Gregor A1 - Hojny, Christopher A1 - Koch, Thorsten A1 - Lübbecke, Marco A1 - Maher, Stephen J. A1 - Miltenberger, Matthias A1 - Müller, Benjamin A1 - Pfetsch, Marc A1 - Puchert, Christian A1 - Rehfeldt, Daniel A1 - Schlösser, Franziska A1 - Schubert, Christoph A1 - Serrano, Felipe A1 - Shinano, Yuji A1 - Viernickel, Jan Merlin A1 - Walter, Matthias A1 - Wegscheider, Fabian A1 - Witt, Jonas T. A1 - Witzig, Jakob T1 - The SCIP Optimization Suite 6.0 N2 - The SCIP Optimization Suite provides a collection of software packages for mathematical optimization centered around the constraint integer programming framework SCIP. This paper discusses enhancements and extensions contained in version 6.0 of the SCIP Optimization Suite. Besides performance improvements of the MIP and MINLP core achieved by new primal heuristics and a new selection criterion for cutting planes, one focus of this release are decomposition algorithms. Both SCIP and the automatic decomposition solver GCG now include advanced functionality for performing Benders’ decomposition in a generic framework. GCG’s detection loop for structured matrices and the coordination of pricing routines for Dantzig-Wolfe decomposition has been significantly revised for greater flexibility. Two SCIP extensions have been added to solve the recursive circle packing problem by a problem-specific column generation scheme and to demonstrate the use of the new Benders’ framework for stochastic capacitated facility location. Last, not least, the report presents updates and additions to the other components and extensions of the SCIP Optimization Suite: the LP solver SoPlex, the modeling language Zimpl, the parallelization framework UG, the Steiner tree solver SCIP-Jack, and the mixed-integer semidefinite programming solver SCIP-SDP. T3 - ZIB-Report - 18-26 KW - constraint integer programming KW - linear programming KW - mixed-integer linear programming KW - mixed-integer nonlinear programming KW - optimization solver KW - branch-and-cut KW - branch-and-price KW - column generation framework KW - parallelization KW - mixed-integer semidefinite programming KW - Steiner tree optimization Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-69361 SN - 1438-0064 ER -