TY - CHAP A1 - Paetsch, Olaf A1 - Baum, Daniel A1 - Prohaska, Steffen A1 - Ehrig, Karsten A1 - Meinel, Dietmar A1 - Ebell, Gino T1 - 3D Corrosion Detection in Time-dependent CT Images of Concrete T2 - DIR-2015 Proceedings N2 - In civil engineering, the corrosion of steel reinforcements in structural elements of concrete bares a risk of stability-reduction, mainly caused by the exposure to chlorides. 3D computed tomography (CT) reveals the inner structure of concrete and allows one to investigate the corrosion with non-destructive testing methods. To carry out such investigations, specimens with a large artificial crack and an embedded steel rebar have been manufactured. 3D CT images of those specimens were acquired in the original state. Subsequently three cycles of electrochemical pre-damaging together with CT imaging were applied. These time series have been evaluated by means of image processing algorithms to segment and quantify the corrosion products. Visualization of the results supports the understanding of how corrosion propagates into cracks and pores. Furthermore, pitting of structural elements can be seen without dismantling. In this work, several image processing and visualization techniques are presented that have turned out to be particularly effective for the visualization and segmentation of corrosion products. Their combination to a workflow for corrosion analysis is the main contribution of this work. Y1 - 2015 UR - http://www.ndt.net/events/DIR2015/app/content/Paper/36_Paetsch.pdf ER - TY - GEN A1 - Knötel, David A1 - Seidel, Ronald A1 - Prohaska, Steffen A1 - Dean, Mason N. A1 - Baum, Daniel T1 - Automated Segmentation of Complex Patterns in Biological Tissues: Lessons from Stingray Tessellated Cartilage N2 - Introduction – Many biological structures show recurring tiling patterns on one structural level or the other. Current image acquisition techniques are able to resolve those tiling patterns to allow quantitative analyses. The resulting image data, however, may contain an enormous number of elements. This renders manual image analysis infeasible, in particular when statistical analysis is to be conducted, requiring a larger number of image data to be analyzed. As a consequence, the analysis process needs to be automated to a large degree. In this paper, we describe a multi-step image segmentation pipeline for the automated segmentation of the calcified cartilage into individual tesserae from computed tomography images of skeletal elements of stingrays. Methods – Besides applying state-of-the-art algorithms like anisotropic diffusion smoothing, local thresholding for foreground segmentation, distance map calculation, and hierarchical watershed, we exploit a graph-based representation for fast correction of the segmentation. In addition, we propose a new distance map that is computed only in the plane that locally best approximates the calcified cartilage. This distance map drastically improves the separation of individual tesserae. We apply our segmentation pipeline to hyomandibulae from three individuals of the round stingray (Urobatis halleri), varying both in age and size. Results – Each of the hyomandibula datasets contains approximately 3000 tesserae. To evaluate the quality of the automated segmentation, four expert users manually generated ground truth segmentations of small parts of one hyomandibula. These ground truth segmentations allowed us to compare the segmentation quality w.r.t. individual tesserae. Additionally, to investigate the segmentation quality of whole skeletal elements, landmarks were manually placed on all tesserae and their positions were then compared to the segmented tesserae. With the proposed segmentation pipeline, we sped up the processing of a single skeletal element from days or weeks to a few hours. T3 - ZIB-Report - 17-62 KW - micro-CT KW - image segmentation KW - 2D distance map KW - hierarchical watershed KW - stingray KW - tesserae KW - biological tilings KW - Amira Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-65785 SN - 1438-0064 ER - TY - JOUR A1 - Knötel, David A1 - Seidel, Ronald A1 - Prohaska, Steffen A1 - Dean, Mason N. A1 - Baum, Daniel T1 - Automated Segmentation of Complex Patterns in Biological Tissues: Lessons from Stingray Tessellated Cartilage JF - PLOS ONE N2 - Introduction – Many biological structures show recurring tiling patterns on one structural level or the other. Current image acquisition techniques are able to resolve those tiling patterns to allow quantitative analyses. The resulting image data, however, may contain an enormous number of elements. This renders manual image analysis infeasible, in particular when statistical analysis is to be conducted, requiring a larger number of image data to be analyzed. As a consequence, the analysis process needs to be automated to a large degree. In this paper, we describe a multi-step image segmentation pipeline for the automated segmentation of the calcified cartilage into individual tesserae from computed tomography images of skeletal elements of stingrays. Methods – Besides applying state-of-the-art algorithms like anisotropic diffusion smoothing, local thresholding for foreground segmentation, distance map calculation, and hierarchical watershed, we exploit a graph-based representation for fast correction of the segmentation. In addition, we propose a new distance map that is computed only in the plane that locally best approximates the calcified cartilage. This distance map drastically improves the separation of individual tesserae. We apply our segmentation pipeline to hyomandibulae from three individuals of the round stingray (Urobatis halleri), varying both in age and size. Results – Each of the hyomandibula datasets contains approximately 3000 tesserae. To evaluate the quality of the automated segmentation, four expert users manually generated ground truth segmentations of small parts of one hyomandibula. These ground truth segmentations allowed us to compare the segmentation quality w.r.t. individual tesserae. Additionally, to investigate the segmentation quality of whole skeletal elements, landmarks were manually placed on all tesserae and their positions were then compared to the segmented tesserae. With the proposed segmentation pipeline, we sped up the processing of a single skeletal element from days or weeks to a few hours. Y1 - 2017 U6 - https://doi.org/10.1371/journal.pone.0188018 ER - TY - GEN A1 - Kober, Cornelia A1 - Sader, Robert A1 - Zeilhofer, Hans-Florian A1 - Prohaska, Steffen A1 - Zachow, Stefan A1 - Deuflhard, Peter T1 - Anisotrope Materialmodellierung für den menschlichen Unterkiefer N2 - Im Rahmen der biomechanischen Simulation knöcherner Organe ist die Frage nach einer befriedigenden Materialbeschreibung nach wie vor ungelöst. Computertomographische Datensätze liefern eine räumliche Verteilung der (Röntgen-)Dichte und ermöglichen damit eine gute Darstellung der individuellen Geometrie. Weiter können die verschiedenen Materialbestandteile des Knochens, Spongiosa und Kortikalis, voneinander getrennt werden. Aber die richtungsabängige Information der Materialanisotropie ist verloren. In dieser Arbeit wird ein Ansatz für eine anisotrope Materialbeschreibung vorgestellt, die es ermöglicht, den Einfluss der individuellen knöchernen Struktur auf das makroskopische Materialverhalten abzuschätzen. T3 - ZIB-Report - 01-31 KW - menschlicher Unterkiefer KW - Simulation mit der Methode der finiten Elemente KW - innerer Aufbau des Knochens KW - anisotrope Elastizität Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-6574 ER - TY - JOUR A1 - Lindow, Norbert A1 - Brünig, Florian A1 - Dercksen, Vincent J. A1 - Fabig, Gunar A1 - Kiewisz, Robert A1 - Redemann, Stefanie A1 - Müller-Reichert, Thomas A1 - Prohaska, Steffen A1 - Baum, Daniel T1 - Semi-automatic stitching of filamentous structures in image stacks from serial-section electron tomography JF - Journal of Microscopy N2 - We present a software-assisted workflow for the alignment and matching of filamentous structures across a three-dimensional (3D) stack of serial images. This is achieved by combining automatic methods, visual validation, and interactive correction. After the computation of an initial automatic matching, the user can continuously improve the result by interactively correcting landmarks or matches of filaments. Supported by a visual quality assessment of regions that have been already inspected, this allows a trade-off between quality and manual labor. The software tool was developed in an interdisciplinary collaboration between computer scientists and cell biologists to investigate cell division by quantitative 3D analysis of microtubules (MTs) in both mitotic and meiotic spindles. For this, each spindle is cut into a series of semi-thick physical sections, of which electron tomograms are acquired. The serial tomograms are then stitched and non-rigidly aligned to allow tracing and connecting of MTs across tomogram boundaries. In practice, automatic stitching alone provides only an incomplete solution, because large physical distortions and a low signal-to-noise ratio often cause experimental difficulties. To derive 3D models of spindles despite dealing with imperfect data related to sample preparation and subsequent data collection, semi-automatic validation and correction is required to remove stitching mistakes. However, due to the large number of MTs in spindles (up to 30k) and their resulting dense spatial arrangement, a naive inspection of each MT is too time-consuming. Furthermore, an interactive visualization of the full image stack is hampered by the size of the data (up to 100 GB). Here, we present a specialized, interactive, semi-automatic solution that considers all requirements for large-scale stitching of filamentous structures in serial-section image stacks. To the best of our knowledge, it is the only currently available tool which is able to process data of the type and size presented here. The key to our solution is a careful design of the visualization and interaction tools for each processing step to guarantee real-time response, and an optimized workflow that efficiently guides the user through datasets. The final solution presented here is the result of an iterative process with tight feedback loops between the involved computer scientists and cell biologists. Y1 - 2021 U6 - https://doi.org/10.1111/jmi.13039 VL - 284 IS - 1 SP - 25 EP - 44 ER - TY - JOUR A1 - Lantzsch, Ina A1 - Yu, Che-Hang A1 - Chen, Yu-Zen A1 - Zimyanin, Vitaly A1 - Yazdkhasti, Hossein A1 - Lindow, Norbert A1 - Szentgyoergyi, Erik A1 - Pani, Ariel M A1 - Prohaska, Steffen A1 - Srayko, Martin A1 - Fürthauer, Sebastian A1 - Redemann, Stefanie T1 - Microtubule reorganization during female meiosis in C. elegans JF - eLife N2 - Most female meiotic spindles undergo striking morphological changes while transitioning from metaphase to anaphase. The ultra-structure of meiotic spindles, and how changes to this structure correlate with such dramatic spindle rearrangements remains largely unknown. To address this, we applied light microscopy, large-scale electron tomography and mathematical modeling of female meiotic \textit{Caenorhabditis elegans} spindles. Combining these approaches, we find that meiotic spindles are dynamic arrays of short microtubules that turn over within seconds. The results show that the metaphase to anaphase transition correlates with an increase in microtubule numbers and a decrease in their average length. Detailed analysis of the tomographic data revealed that the microtubule length changes significantly during the metaphase-to-anaphase transition. This effect is most pronounced for microtubules located within 150 nm of the chromosome surface. To understand the mechanisms that drive this transition, we developed a mathematical model for the microtubule length distribution that considers microtubule growth, catastrophe, and severing. Using Bayesian inference to compare model predictions and data, we find that microtubule turn-over is the major driver of the spindle reorganizations. Our data suggest that in metaphase only a minor fraction of microtubules, those closest to the chromosomes, are severed. The large majority of microtubules, which are not in close contact with chromosomes, do not undergo severing. Instead, their length distribution is fully explained by growth and catastrophe. This suggests that the most prominent drivers of spindle rearrangements are changes in nucleation and catastrophe rate. In addition, we provide evidence that microtubule severing is dependent on katanin. Y1 - 2021 U6 - https://doi.org/10.7554/eLife.58903 VL - 10 SP - e58903 ER - TY - JOUR A1 - Brence, Blaž A1 - Brummer, Josephine A1 - Dercksen, Vincent J. A1 - Özel, Mehmet Neset A1 - Kulkarni, Abhishkek A1 - Wolterhoff, Neele A1 - Prohaska, Steffen A1 - Hiesinger, Peter Robin A1 - Baum, Daniel T1 - Semi-automatic Geometrical Reconstruction and Analysis of Filopodia Dynamics in 4D Two-Photon Microscopy Images JF - bioRxiv N2 - Background: Filopodia are thin and dynamic membrane protrusions that play a crucial role in cell migration, axon guidance, and other processes where cells explore and interact with their surroundings. Historically, filopodial dynamics have been studied in great detail in 2D in cultured cells, and more recently in 3D culture as well as living brains. However, there is a lack of efficient tools to trace and track filopodia in 4D images of complex brain cells. Results: To address this issue, we have developed a semi-automatic workflow for tracing filopodia in 3D images and tracking the traced filopodia over time. The workflow was developed based on high-resolution data of photoreceptor axon terminals in the in vivo context of normal Drosophila brain development, but devised to be applicable to filopodia in any system, including at different temporal and spatial scales. In contrast to the pre-existing methods, our workflow relies solely on the original intensity images without the requirement for segmentation or complex preprocessing. The workflow was realized in C++ within the Amira software system and consists of two main parts, dataset pre-processing, and geometrical filopodia reconstruction, where each of the two parts comprises multiple steps. In this paper, we provide an extensive workflow description and demonstrate its versatility for two different axo-dendritic morphologies, R7 and Dm8 cells. Finally, we provide an analysis of the time requirements for user input and data processing. Conclusion: To facilitate simple application within Amira or other frameworks, we share the source code, which is available athttps://github.com/zibamira/filopodia-tool. Y1 - 2025 U6 - https://doi.org/10.1101/2025.05.20.654789 ER -