TY - GEN A1 - Paetsch, Olaf A1 - Stalling, Detlev A1 - Korzen, Manfred T1 - Online-Visualisierung von Brandversuchen an Bauteilen Y1 - 1997 PB - Konrad-Zuse-Zentrum für Informationstechnik, Berlin (ZIB) / Bundesanstalt für Materialfoschung und -prüfung (BAM) Berlin ER - TY - CHAP A1 - Korzen, Manfred A1 - Schriever, Robert A1 - Ziener, Kai-Uwe A1 - Paetsch, Olaf A1 - Zumbusch, Gerd ED - Ziebs, J. al. T1 - Real-Time 3-D Visualization of Surface Temperature Fields Measured by Thermocouples on Steel Strutures in Fire Engineering T2 - Proc. Int. Symposium Local Strain and Temperature Measurements in Non-Uniform Fields at Elevated Temperatures Y1 - 1996 SP - 253 EP - 262 PB - Woodhead CY - England ER - TY - CHAP A1 - Jácome, Leonardo Agudo A1 - Eggeler, Gunter A1 - Pöthkow, Kai A1 - Paetsch, Olaf A1 - Hege, Hans-Christian T1 - Three-Dimensional Characterization of Superdislocation Interactions in the High Temperature and Low Stress Creep Regime of Ni-Base Superalloy Single Crystals T2 - Proceedings of CREEP 2015 – 13th International Conference on Creep and Fracture of Engineering Materials and Structures, May 31 – June 4, 2015, Toulouse, France N2 - Monocrystaline Ni-base superalloys are the material of choice for first row blades in jet engine gas turbines. Using a novel visualization tool for 3D reconstruction and visualization of dislocation line segments from stereo-pairs of scanning transmission electron microscopies, the superdislocation substructures in Ni-base superalloy LEK 94 (crept to ε = 26%) are characterized. Probable scenarios are discussed, how these dislocation substructures form. Y1 - 2015 SP - 16 EP - 17 ER - TY - CHAP A1 - Ehrig, Karsten A1 - Goebbels, Jürgen A1 - Meinel, Dietmar A1 - Paetsch, Olaf A1 - Prohaska, Steffen A1 - Zobel, Valentin T1 - Comparison of Crack Detection Methods for Analyzing Damage Processes in Concrete with Computed Tomography T2 - International Symposium on Digital Industrial Radiology and Computed Tomography Y1 - 2011 ER - TY - JOUR A1 - Agudo Jácome, Leonardo A1 - Hege, Hans-Christian A1 - Paetsch, Olaf A1 - Pöthkow, Kai T1 - Three-dimensional reconstruction and quantification of dislocation substructures from transmission electron microscopy stereo pairs JF - Ultramicroscopy N2 - A great amount of material properties is strongly influenced by dislocations, the carriers of plastic deformation. It is therefore paramount to have appropriate tools to quantify dislocation substructures with regard to their features, e.g., dislocation density, Burgers vectors or line direction. While the transmission electron microscope (TEM) has been the most widely-used equipment implemented to investigate dislocations, it usually is limited to the two-dimensional (2D) observation of three-dimensional (3D) structures. We reconstruct, visualize and quantify 3D dislocation substructure models from only two TEM images (stereo pairs) and assess the results. The reconstruction is based on the manual interactive tracing of filiform objects on both images of the stereo pair. The reconstruction and quantification method are demonstrated on dark field (DF) scanning (S)TEM micrographs of dislocation substructures imaged under diffraction contrast conditions. For this purpose, thick regions (>300 nm) of TEM foils are analyzed, which are extracted from a Ni-base superalloy single crystal after high temperature creep deformation. It is shown how the method allows 3D quantification from stereo pairs in a wide range of tilt conditions, achieving line length and orientation uncertainties of 3% and 7°, respectively. Parameters that affect the quality of such reconstructions are discussed. Y1 - 2018 U6 - https://doi.org/10.1016/j.ultramic.2018.08.015 VL - 195 SP - 157 EP - 170 ER - TY - GEN A1 - Agudo Jácome, Leonardo A1 - Hege, Hans-Christian A1 - Paetsch, Olaf A1 - Pöthkow, Kai T1 - Three-Dimensional Reconstruction and Quantification of Dislocation Substructures from Transmission Electron Microscopy Stereo-Pairs N2 - A great amount of material properties is strongly influenced by dislocations, the carriers of plastic deformation. It is therefore paramount to have appropriate tools to quantify dislocation substructures with regard to their features, e.g., dislocation density, Burgers vectors or line direction. While the transmission electron microscope (TEM) has been the most widely-used equipment implemented to investigate dislocations, it usually is limited to the two-dimensional (2D) observation of three-dimensional (3D) structures. We reconstruct, visualize and quantify 3D dislocation substructure models from only two TEM images (stereo-pairs) and assess the results. The reconstruction is based on the manual interactive tracing of filiform objects on both images of the stereo-pair. The reconstruction and quantification method are demonstrated on dark field (DF) scanning (S)TEM micrographs of dislocation substructures imaged under diffraction contrast conditions. For this purpose, thick regions (> 300 nm) of TEM foils are analyzed, which are extracted from a Ni-base superalloy single crystal after high temperature creep deformation. It is shown how the method allows 3D quantification from stereo-pairs in a wide range of tilt conditions, achieving line length and orientation uncertainties of 3 % and 7°, respectively. Parameters that affect the quality of such reconstructions are discussed. T3 - ZIB-Report - 18-50 KW - dislocation, diffraction contrast, scanning transmission electron microscopy, stereoscopy, visualization Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-70339 SN - 1438-0064 ER -