TY - CHAP A1 - Eisenblätter, Andreas A1 - Koch, Thorsten A1 - Martin, Alexander A1 - Achterberg, Tobias A1 - Fügenschuh, Armin A1 - Koster, Arie M.C.A. A1 - Wegel, Oliver A1 - Wessäly, Roland ED - Anandalingam, G. ED - Raghavan, S. T1 - Modelling Feasible Network Configurations for UMTS T2 - Telecommunications Network Design and Management Y1 - 2003 UR - http://opus.kobv.de/zib/volltexte/2002/684/ PB - Kluver ER - TY - CHAP A1 - Eisenblätter, Andreas A1 - Fügenschuh, Armin A1 - Geerdes, Hans-Florian A1 - Junglas, Daniel A1 - Koch, Thorsten A1 - Martin, Alexander ED - Ahr, Dino ED - Fahrion, Roland ED - Oswald, Marcus ED - Reinelt, Gerhard T1 - Optimisation Methods for UMTS Radio Network Planning T2 - Operation Research Proceedings 2003 Y1 - 2003 U6 - https://doi.org/10.1007/978-3-642-17022-5_5 SP - 31 EP - 38 PB - Springer ER - TY - GEN A1 - Eisenblätter, Andreas A1 - Fügenschuh, Armin A1 - Koch, Thorsten A1 - Koster, Arie M.C.A. A1 - Martin, Alexander A1 - Pfender, Tobias A1 - Wegel, Oliver A1 - Wessäly, Roland T1 - Modelling Feasible Network Configurations for UMTS N2 - A model for the optimisation of the location and configuration of base stations in a UMTS network is described. The focus is primarily on modelling the configuration problem sufficiently accurate using mixed-integer variables and (essentially) linear constraints. These constraints reflect the limited downlink code capacity in each cell, the interference limitations for successful up- and downlink transmissions, the need for sufficiently strong (cell) pilot signals, and the potential gain for mobiles from being in soft(er) hand-over. It is also explained how to use the model as a basis for rating network configurations. T3 - ZIB-Report - 02-16 KW - UMTS KW - radio interface KW - network planning KW - configuration KW - perfect power control KW - mathematical model KW - mixed integer programming KW - MOMENTUM KW - IST-20 Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-6837 ER - TY - GEN A1 - Eisenblätter, Andreas A1 - Fügenschuh, Armin A1 - Geerdes, Hans-Florian A1 - Junglas, Daniel A1 - Koch, Thorsten A1 - Martin, Alexander T1 - Optimization Methods for UMTS Radio Network Planning N2 - The UMTS radio network planning problem poses the challenge of designing a cost-effective network that provides users with sufficient coverage and capacity. We describe an optimization model for this problem that is based on comprehensive planning data of the EU project MOMENTUM. We present heuristic mathematical methods for this realistic model, including computational results. T3 - ZIB-Report - 03-41 Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-7637 ER - TY - GEN A1 - Fügenschuh, Armin A1 - Hiller, Benjamin A1 - Humpola, Jesco A1 - Koch, Thorsten A1 - Lehmann, Thomas A1 - Schwarz, Robert A1 - Schweiger, Jonas A1 - Szabó, Jácint T1 - Gas Network Topology Optimization for Upcoming Market Requirements N2 - Gas distribution networks are complex structures that consist of passive pipes, and active, controllable elements such as valves and compressors. Controlling such network means to find a suitable setting for all active components such that a nominated amount of gas can be transmitted from entries to exits through the network, without violating physical or operational constraints. The control of a large-scale gas network is a challenging task from a practical point of view. In most companies the actual controlling process is supported by means of computer software that is able to simulate the flow of the gas. However, the active settings have to be set manually within such simulation software. The solution quality thus depends on the experience of a human planner. When the gas network is insufficient for the transport then topology extensions come into play. Here a set of new pipes or active elements is determined such that the extended network admits a feasible control again. The question again is how to select these extensions and where to place them such that the total extension costs are minimal. Industrial practice is again to use the same simulation software, determine extensions by experience, add them to the virtual network, and then try to find a feasible control of the active elements. The validity of this approach now depends even more on the human planner. Another weakness of this manual simulation-based approach is that it cannot establish infeasibility of a certain gas nomination, unless all settings of the active elements are tried. Moreover, it is impossible to find a cost-optimal network extension in this way. In order to overcome these shortcomings of the manual planning approach we present a new approach, rigorously based on mathematical optimization. Hereto we describe a model for finding feasible controls and then extend this model such that topology extensions can additionally and simultaneously be covered. Numerical results for real-world instances are presented and discussed. T3 - ZIB-Report - 11-09 KW - Mathematical Optimization KW - Gas Distribution Networks KW - Topology Planning Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-12348 ER - TY - CHAP A1 - Eisenblätter, Andreas A1 - Fügenschuh, Armin A1 - Koch, Thorsten A1 - Koster, Arie M.C.A. A1 - Martin, Alexander A1 - Pfender, Tobias A1 - Wegel, Oliver A1 - Wessäly, Roland ED - G. Anandalingam, S. T1 - Mathematical Model of Feasible Network Configurations for UMTS T2 - Telecommunications network design and management Y1 - 2002 SP - 1 EP - 24 PB - Kluwer ER - TY - GEN A1 - Eisenblätter, Andreas A1 - Fügenschuh, Armin A1 - Geerdes, Hans-Florian A1 - Koch, Thorsten A1 - Türke, Ulrich A1 - Meijerink, Ellen T1 - XML Data Specification and Documentation Y1 - 2003 PB - IST-2000-28088 MOMENTUM Technical Report ER - TY - CHAP A1 - Eisenblätter, Andreas A1 - Fügenschuh, Armin A1 - Geerdes, Hans-Florian A1 - Junglas, Daniel A1 - Koch, Thorsten A1 - Martin, Alexander T1 - Integer Programming Methods for UMTS Radio Network Planning T2 - Proceedings of the WiOpt’04, Cambridge, UK Y1 - 2004 ER - TY - JOUR A1 - Pfetsch, Marc A1 - Fügenschuh, Armin A1 - Geißler, Björn A1 - Geißler, Nina A1 - Gollmer, Ralf A1 - Hiller, Benjamin A1 - Humpola, Jesco A1 - Koch, Thorsten A1 - Lehmann, Thomas A1 - Martin, Alexander A1 - Morsi, Antonio A1 - Rövekamp, Jessica A1 - Schewe, Lars A1 - Schmidt, Martin A1 - Schultz, Rüdiger A1 - Schwarz, Robert A1 - Schweiger, Jonas A1 - Stangl, Claudia A1 - Steinbach, Marc A1 - Vigerske, Stefan A1 - Willert, Bernhard T1 - Validation of Nominations in Gas Network Optimization: Models, Methods, and Solutions JF - Optimization Methods and Software N2 - In this article we investigate methods to solve a fundamental task in gas transportation, namely the validation of nomination problem: Given a gas transmission network consisting of passive pipelines and active, controllable elements and given an amount of gas at every entry and exit point of the network, find operational settings for all active elements such that there exists a network state meeting all physical, technical, and legal constraints. We describe a two-stage approach to solve the resulting complex and numerically difficult feasibility problem. The first phase consists of four distinct algorithms applying linear, and methods for complementarity constraints to compute possible settings for the discrete decisions. The second phase employs a precise continuous programming model of the gas network. Using this setup, we are able to compute high quality solutions to real-world industrial instances that are significantly larger than networks that have appeared in the mathematical programming literature before. Y1 - 2014 U6 - https://doi.org/10.1080/10556788.2014.888426 PB - Taylor & Francis ER - TY - CHAP A1 - Fügenschuh, Armin A1 - Hiller, Benjamin A1 - Humpola, Jesco A1 - Koch, Thorsten A1 - Lehmann, Thomas A1 - Schwarz, Robert A1 - Schweiger, Jonas A1 - Szabo, Jacint T1 - Gas Network Topology Optimization for Upcoming Market Requirements T2 - International Conference on the European Energy Market (EEM) N2 - Gas distribution networks are complex structures that consist of passive pipes, and active, controllable elements such as valves and compressors. Controlling such network means to find a suitable setting for all active components such that a nominated amount of gas can be transmitted from entries to exits through the network, without violating physical or operational constraints. The control of a large-scale gas network is a challenging task from a practical point of view. In most companies the actual controlling process is supported by means of computer software that is able to simulate the flow of the gas. However, the active settings have to be set manually within such simulation software. The solution quality thus depends on the experience of a human planner. When the gas network is insufficient for the transport then topology extensions come into play. Here a set of new pipes or active elements is determined such that the extended network admits a feasible control again. The question again is how to select these extensions and where to place them such that the total extension costs are minimal. Industrial practice is again to use the same simulation software, determine extensions by experience, add them to the virtual network, and then try to find a feasible control of the active elements. The validity of this approach now depends even more on the human planner. Another weakness of this manual simulation-based approach is that it cannot establish infeasibility of a certain gas nomination, unless all settings of the active elements are tried. Moreover, it is impossible to find a cost-optimal network extension in this way. In order to overcome these shortcomings of the manual planning approach we present a new approach, rigorously based on mathematical optimization. Hereto we describe a model for finding feasible controls and then extend this model such that topology extensions can additionally and simultaneously be covered. Numerical results for real-world instances are presented and discussed. Y1 - 2011 U6 - https://doi.org/10.1109/EEM.2011.5953035 SP - 346 EP - 351 ER -