TY - JOUR A1 - Borndörfer, Ralf A1 - Danecker, Fabian A1 - Weiser, Martin T1 - A Discrete-Continuous Algorithm for Free Flight Planning JF - Algorithms N2 - We propose a hybrid discrete-continuous algorithm for flight planning in free flight airspaces. In a first step, our DisCOptER method discrete-continuous optimization for enhanced resolution) computes a globally optimal approximate flight path on a discretization of the problem using the A* method. This route initializes a Newton method that converges rapidly to the smooth optimum in a second step. The correctness, accuracy, and complexity of the method are goverened by the choice of the crossover point that determines the coarseness of the discretization. We analyze the optimal choice of the crossover point and demonstrate the asymtotic superority of DisCOptER over a purely discrete approach. KW - shortest path KW - flight planning KW - free flight KW - discrete-continuous algorithm KW - optimal control KW - discrete optimization Y1 - 2020 U6 - https://doi.org/10.3390/a14010004 SN - 1438-0064 VL - 14 IS - 1 SP - 4 PB - MDPI ER - TY - THES A1 - Götschel, Sebastian T1 - Adaptive Lossy Trajectory Compression for Optimal Control of Parabolic PDEs N2 - Optimal control problems governed by nonlinear, time-dependent PDEs on three-dimensional spatial domains are an important tool in many fields, ranging from engineering applications to medicine. For the solution of such optimization problems, methods working on the reduced objective functional are often employed to avoid a full spatio-temporal discretization of the problem. The evaluation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. The state enters into the adjoint equation, requiring the storage of a full 4D data set. If Newton-CG methods are used, two additional trajectories have to be stored. To get numerical results that are accurate enough, in many cases very fine discretizations in time and space are necessary, leading to a significant amount of data to be stored and transmitted to mass storage. This thesis deals with the development and analysis of methods for lossy compression of such finite element solutions. The algorithms are based on a change of basis to reduce correlations in the data, combined with quantization. This is achieved by transforming the finite element coefficient vector from the nodal to the hierarchical basis, followed by rounding the coefficients to a prescribed precision. Due to the inexact reconstruction, and thus inexact data for the adjoint equation, the error induced in the reduced gradient, and reduced Hessian, has to be controlled, to not impede convergence of the optimization. Accuracy requirements of different optimization methods are analyzed, and computable error estimates for the influence of lossy trajectory storage are derived. These tools are used to adaptively control the accuracy of the compressed data. The efficiency of the algorithms is demonstrated on several numerical examples, ranging from a simple linear, scalar equation to a semi-linear system of reaction-diffusion equations. In all examples considerable reductions in storage space and bandwidth requirements are achieved, without significantly influencing the convergence behavior of the optimization methods. Finally, to go beyond pointwise error control, the hierarchical basis transform can be replaced by more sophisticated wavelet transforms. Numerical experiments indicate that choosing suitable norms for error control allows higher compression factors. KW - optimal control KW - semi-linear parabolic PDEs KW - adjoint gradient computation KW - trajectory storage KW - lossy compression Y1 - 2015 UR - http://www.diss.fu-berlin.de/diss/receive/FUDISS_thesis_000000098552 ER - TY - GEN A1 - Zhang, Wei A1 - Wang, Han A1 - Hartmann, Carsten A1 - Weber, Marcus A1 - Schütte, Christof T1 - Applications of the cross-entropy method to importance sampling and optimal control of diffusions N2 - We study the cross-entropy method for diffusions. One of the results is a versatile cross-entropy algorithm that can be used to design efficient importance sampling strategies for rare events or to solve optimal control problems. The approach is based on the minimization of a suitable cross-entropy functional, with a parametric family of exponentially tilted probability distributions. We illustrate the new algorithm with several numerical examples and discuss algorithmic issues and possible extensions of the method. T3 - ZIB-Report - 14-10 KW - important sampling KW - optimal control KW - cross-entropy method KW - rare events KW - change of measure Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0297-zib-49720 SN - 1438-0064 ER -