@misc{WeiserSchielaDeuflhard, author = {Weiser, Martin and Schiela, Anton and Deuflhard, Peter}, title = {Asymptotic Mesh Independence of Newton's Method Revisited}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-7352}, number = {03-13}, abstract = {The paper presents a new affine invariant theory on asymptotic mesh independence of Newton's method in nonlinear PDEs. Compared to earlier attempts, the new approach is both much simpler and more natural from the algorithmic point of view. The theory is exemplified at collocation methods for ODE boundary value problems and at finite element methods for elliptic PDE problems.}, language = {en} } @misc{WeiserSchiela, author = {Weiser, Martin and Schiela, Anton}, title = {Function space interior point methods for PDE constrained optimization}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-8027}, number = {04-27}, abstract = {A primal-dual interior point method for optimal control problems with PDE constraints is considered. The algorithm is directly applied to the infinite dimensional problem. Existence and convergence of the central path are analyzed. Numerical results from an inexact continuation method applied to a model problem are shown.}, language = {en} } @misc{WeiserScacchi, author = {Weiser, Martin and Scacchi, Simone}, title = {Spectral Deferred Correction methods for adaptive electro-mechanical coupling in cardiac simulation}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-50695}, abstract = {We investigate spectral deferred correction (SDC) methods for time stepping and their interplay with spatio-temporal adaptivity, applied to the solution of the cardiac electro-mechanical coupling model. This model consists of the Monodomain equations, a reaction-diffusion system modeling the cardiac bioelectrical activity, coupled with a quasi-static mechanical model describing the contraction and relaxation of the cardiac muscle. The numerical approximation of the cardiac electro-mechanical coupling is a challenging multiphysics problem, because it exhibits very different spatial and temporal scales. Therefore, spatio-temporal adaptivity is a promising approach to reduce the computational complexity. SDC methods are simple iterative methods for solving collocation systems. We exploit their flexibility for combining them in various ways with spatio-temporal adaptivity. The accuracy and computational complexity of the resulting methods are studied on some numerical examples.}, language = {en} } @misc{WeiserRoelligArndtetal., author = {Weiser, Martin and R{\"o}llig, Mathias and Arndt, Ralf and Erdmann, Bodo}, title = {Development and test of a numerical model for pulse thermography in civil engineering}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-10980}, number = {08-45}, abstract = {Pulse thermography of concrete structures is used in civil engineering for detecting voids, honeycombing and delamination. The physical situation is readily modeled by Fourier's law. Despite the simplicity of the PDE structure, quantitatively realistic numerical 3D simulation faces two major obstacles. First, the short heating pulse induces a thin boundary layer at the heated surface which encapsulates all information and therefore has to be resolved faithfully. Even with adaptive mesh refinement techniques, obtaining useful accuracies requires an unsatisfactorily fine discretization. Second, bulk material parameters and boundary conditions are barely known exactly. We address both issues by a semi-analytic reformulation of the heat transport problem and by parameter identification. Numerical results are compared with measurements of test specimens.}, language = {en} } @misc{WeiserGoetschel, author = {Weiser, Martin and G{\"o}tschel, Sebastian}, title = {State Trajectory Compression for Optimal Control with Parabolic PDEs}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-11676}, number = {10-05}, abstract = {In optimal control problems with nonlinear time-dependent 3D PDEs, full 4D discretizations are usually prohibitive due to the storage requirement. For this reason gradient and quasi-Newton methods working on the reduced functional are often employed. The computation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. The state enters into the adjoint equation, again requiring the storage of a full 4D data set. We propose a lossy compression algorithm using an inexact but cheap predictor for the state data, with additional entropy coding of prediction errors. As the data is used inside a discretized, iterative algorithm, lossy coding maintaining an error bound is sufficient.}, language = {en} } @misc{WeiserGaenzlerSchiela, author = {Weiser, Martin and G{\"a}nzler, Tobias and Schiela, Anton}, title = {A Control Reduced Primal Interior Point Method for PDE Constrained Optimization}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-8138}, number = {04-38}, abstract = {A primal interior point method for control constrained optimal control problems with PDE constraints is considered. Pointwise elimination of the control leads to a homotopy in the remaining state and dual variables, which is addressed by a short step pathfollowing method. The algorithm is applied to the continuous, infinite dimensional problem, where discretization is performed only in the innermost loop when solving linear equations. The a priori elimination of the least regular control permits to obtain the required accuracy with comparable coarse meshes. Convergence of the method and discretization errors are studied, and the method is illustrated at two numerical examples.}, language = {en} } @misc{WeiserGhosh, author = {Weiser, Martin and Ghosh, Sunayana}, title = {Theoretically optimal inexact SDC methods}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-53140}, abstract = {In several inital value problems with particularly expensive right hand side computation, there is a trade-off between accuracy and computational effort in evaluating the right hand sides. We consider inexact spectral deferred correction (SDC) methods for solving such non-stiff initial value problems. SDC methods are interpreted as fixed point iterations and, due to their corrective iterative nature, allow to exploit the accuracy-work-tradeoff for a reduction of the total computational effort. On one hand we derive an error model bounding the total error in terms of the right hand side evaluation errors. On the other hand, we define work models describing the computational effort in terms of the evaluation accuracy. Combining both, a theoretically optimal tolerance selection is worked out by minimizing the total work subject to achieving the requested tolerance.}, language = {en} } @misc{WeiserFreytagErdmannetal., author = {Weiser, Martin and Freytag, Yvonne and Erdmann, Bodo and Hubig, Michael and Mall, Gita}, title = {Optimal Design of Experiments for Estimating the Time of Death in Forensic Medicine}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-67247}, abstract = {Estimation of time of death based on a single measurement of body core temperature is a standard procedure in forensic medicine. Mechanistic models using simulation of heat transport promise higher accuracy than established phenomenological models in particular in nonstandard situations, but involve many not exactly known physical parameters. Identifying both time of death and physical parameters from multiple temperature measurements is one possibility to reduce the uncertainty significantly. In this paper, we consider the inverse problem in a Bayesian setting and perform both local and sampling-based uncertainty quantification, where proper orthogonal decomposition is used as model reduction for fast solution of the forward model. Based on the local uncertainty quantification, optimal design of experiments is performed in order to minimize the uncertainty in the time of death estimate for a given number of measurements. For reasons of practicability, temperature acquisition points are selected from a set of candidates in different spatial and temporal locations. Applied to a real corpse model, a significant accuracy improvement is obtained already with a small number of measurements.}, language = {en} } @misc{WeiserErdmannSchenkletal.2017, author = {Weiser, Martin and Erdmann, Bodo and Schenkl, Sebastian and Muggenthaler, Holger and Hubig, Michael and Mall, Gita and Zachow, Stefan}, title = {Uncertainty in Temperature-Based Determination of Time of Death}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-63818}, year = {2017}, abstract = {Temperature-based estimation of time of death (ToD) can be per- formed either with the help of simple phenomenological models of corpse cooling or with detailed mechanistic (thermodynamic) heat transfer mod- els. The latter are much more complex, but allow a higher accuracy of ToD estimation as in principle all relevant cooling mechanisms can be taken into account. The potentially higher accuracy depends on the accuracy of tissue and environmental parameters as well as on the geometric resolution. We in- vestigate the impact of parameter variations and geometry representation on the estimated ToD based on a highly detailed 3D corpse model, that has been segmented and geometrically reconstructed from a computed to- mography (CT) data set, differentiating various organs and tissue types. From that we identify the most crucial parameters to measure or estimate, and obtain a local uncertainty quantifcation for the ToD.}, language = {en} } @misc{WeiserDeuflhardErdmann, author = {Weiser, Martin and Deuflhard, Peter and Erdmann, Bodo}, title = {Affine conjugate adaptive Newton methods for nonlinear elastomechanics}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-7768}, number = {04-01}, abstract = {The paper extends affine conjugate Newton methods from convex to nonconvex minimization, with particular emphasis on PDE problems originating from compressible hyperelasticity. Based on well-known schemes from finite dimensional nonlinear optimization, three different algorithmic variants are worked out in a function space setting, which permits an adaptive multilevel finite element implementation. These algorithms are tested on two well-known 3D test problems and a real-life example from surgical operation planning.}, language = {en} } @misc{WeiserDeuflhard, author = {Weiser, Martin and Deuflhard, Peter}, title = {The Central Path towards the Numerical Solution of Optimal Control Problems}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-6380}, number = {01-12}, abstract = {A new approach to the numerical solution of optimal control problems including control and state constraints is presented. Like hybrid methods, the approach aims at combining the advantages of direct and indirect methods. Unlike hybrid methods, however, our method is directly based on interior-point concepts in function space --- realized via an adaptive multilevel scheme applied to the complementarity formulation and numerical continuation along the central path. Existence of the central path and its continuation towards the solution point is analyzed in some theoretical detail. An adaptive stepsize control with respect to the duality gap parameter is worked out in the framework of affine invariant inexact Newton methods. Finally, the performance of a first version of our new type of algorithm is documented by the successful treatment of the well-known intricate windshear problem.}, language = {en} } @misc{Weiser, author = {Weiser, Martin}, title = {Interior Point Methods in Function Space}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-7578}, number = {03-35}, abstract = {A primal-dual interior point method for optimal control problems is considered. The algorithm is directly applied to the infinite dimensional problem. Existence and convergence of the central path are analyzed, and linear convergence of a short step pathfollowing method is established.}, language = {en} } @misc{Weiser, author = {Weiser, Martin}, title = {On goal-oriented adaptivity for elliptic optimal control problems}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-11192}, number = {09-08}, abstract = {The paper proposes goal-oriented error estimation and mesh refinement for optimal control problems with elliptic PDE constraints using the value of the reduced cost functional as quantity of interest. Error representation, hierarchical error estimators, and greedy-style error indicators are derived and compared to their counterparts when using the all-at-once cost functional as quantity of interest. Finally, the efficiency of the error estimator and generated meshes are demonstrated on numerical examples.}, language = {en} } @misc{Weiser, author = {Weiser, Martin}, title = {Optimization and Identification in Regional Hyperthermia}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-10916}, number = {08-40}, abstract = {Regional hyperthermia is a cancer therapy aiming at heating tumors using phased array applicators. This article provides an overview over current mathematical challenges of delivering individually optimal treatments. The focus is on therapy planning and identification of technical as well as physiological quantities from MR thermometry measurements.}, language = {en} } @misc{Weiser, author = {Weiser, Martin}, title = {Pointwise Nonlinear Scaling for Reaction-Diffusion-Equations}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-10493}, number = {07-45}, abstract = {Parabolic reaction-diffusion systems may develop sharp moving reaction fronts which pose a challenge even for adaptive finite element methods. We propose a method to transform the equation into an equivalent form that usually exhibits solutions which are easier to discretize, giving higher accuracy for a given number of degrees of freedom. The transformation is realized as an efficiently computable pointwise nonlinear scaling that is optimized for prototypical planar travelling wave solutions of the underlying reaction-diffusion equation. The gain in either performance or accuracy is demonstrated on different numerical examples.}, language = {en} } @misc{Weiser, author = {Weiser, Martin}, title = {Faster SDC convergence on non-equidistant grids by DIRK sweeps}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-18662}, abstract = {Spectral deferred correction methods for solving stiff ODEs are known to converge rapidly towards the collocation limit solution on equidistant grids, but show a much less favourable contraction on non-equidistant grids such as Radau-IIa points. We interprete SDC methods as fixed point iterations for the collocation system and propose new DIRK-type sweeps for stiff problems based on purely linear algebraic considerations. Good convergence is recovered also on non-equidistant grids. The properties of different variants are explored on a couple of numerical examples.}, language = {en} } @misc{VolkweinWeiser, author = {Volkwein, Stefan and Weiser, Martin}, title = {Affine Invariant Convergence Analysis for Inexact Augmented Lagrangian-SQP Methods}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-6243}, number = {00-56}, abstract = {An affine invariant convergence analysis for inexact augmented Lagrangian-SQP methods is presented. The theory is used for the construction of an accuracy matching between iteration errors and truncation errors, which arise from the inexact linear system solves. The theoretical investigations are illustrated numerically by an optimal control problem for the Burgers equation.}, language = {en} } @misc{SchielaWeiser, author = {Schiela, Anton and Weiser, Martin}, title = {Superlinear Convergence of the Control Reduced Interior Point Method for PDE Constrained Optimization}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-8490}, number = {05-15}, abstract = {A thorough convergence analysis of the Control Reduced Interior Point Method in function space is performed. This recently proposed method is a primal interior point pathfollowing scheme with the special feature, that the control variable is eliminated from the optimality system. Apart from global linear convergence we show, that this method converges locally almost quadratically, if the optimal solution satisfies a function space analogue to a non-degeneracy condition. In numerical experiments we observe, that a prototype implementation of our method behaves in compliance with our theoretical results.}, language = {en} } @misc{SchielaWeiser, author = {Schiela, Anton and Weiser, Martin}, title = {Barrier methods for a control problem from hyperthermia treatment planning}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-11567}, number = {09-36}, abstract = {We consider an optimal control problem from hyperthermia treatment planning and its barrier regularization. We derive basic results, which lay the groundwork for the computation of optimal solutions via an interior point path-following method. Further, we report on a numerical implementation of such a method and its performance at an example problem.}, language = {en} } @misc{Schiela, author = {Schiela, Anton}, title = {An Extended Mathematical Framework for Barrier Methods in Function Space}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-10593}, number = {08-07}, abstract = {An extended mathematical framework for barrier methods for state constrained optimal control compared to [Schiela, ZIB-Report 07-07] is considered. This allows to apply the results derived there to more general classes of optimal control problems, in particular to boundary control and finite dimensional control.}, language = {en} }