@inproceedings{EulerBorndoerferStrunketal.2022, author = {Euler, Ricardo and Bornd{\"o}rfer, Ralf and Strunk, Timo and Takkula, Tuomo}, title = {ULD Build-Up Scheduling with Dynamic Batching in an Air Freight Hub}, booktitle = {Operations Research Proceedings 2021}, doi = {10.1007/978-3-031-08623-6_38}, pages = {254 -- 260}, year = {2022}, abstract = {Air freight is usually shipped in standardized unit load devices (ULDs). The planning process for the consolidation of transit cargo from inbound flights or locally emerging shipments into ULDs for outbound flights is called build-up scheduling. More specifically, outbound ULDs must be assigned a time and a workstation subject to both workstation capacity constraints and the availability of shipments which in turn depends on break-down decisions for incoming ULDs. ULDs scheduled for the same outbound flight should be built up in temporal and spatial proximity. This serves both to minimize overhead in transportation times and to allow workers to move freight between ULDs. We propose to address this requirement by processing ULDs for the same outbound flight in batches. For the above build-up scheduling problem, we introduce a multi-commodity network design model. Outbound flights are modeled as commodities; transit cargo is represented by cargo flow volume and unpack and batch decisions are represented as design variables. The model is solved with a standard MIP solver on a set of benchmark data. For instances with a limited number of resource conflicts, near-optimal solutions are found in under two hours for a whole week of operations.}, language = {en} } @misc{SchlechteBlomeGerberetal.2023, author = {Schlechte, Thomas and Blome, Christian and Gerber, Stefan and Hauser, Stefan and Kasten, Jens and M{\"u}ller, Gilbert and Schulz, Christof and Th{\"u}ring, Michel and Weider, Steffen}, title = {The Bouquet of Features in Rolling Stock Rotation Planning}, journal = {Conference Proceedings RailBelgrade 2023}, year = {2023}, abstract = {Rolling stock is one of the major assets for a railway transportation company. Hence, their utilization should be as efficiently and effectively as possible. Railway undertakings are facing rolling stock scheduling challenges in different forms - from rather idealized weekly strategic problems to very concrete operational ones. Thus, a vast of optimization models with different features and objectives exist. Thorlacius et al. (2015) provides a comprehensive and valuable collection on technical requirements, models, and methods considered in the scientific literature. We contribute with an update including recent works. The main focus of the paper is to present a classification and elaboration of the major features which our solver R-OPT is able to handle. Moreover, the basic optimization model and algorithmic ingredients of R-OPT are discussed. Finally, we present computational results for a cargo application at SBB CARGO AG and other railway undertakings for passenger traffic in Europe to show the capabilities of R-OPT.}, language = {en} } @article{MaristanydelasCasasKrausSedenoNodaetal.2023, author = {Maristany de las Casas, Pedro and Kraus, Luitgard and Sedeno-Noda, Antonio and Bornd{\"o}rfer, Ralf}, title = {Targeted multiobjective Dijkstra Algorithm}, volume = {82}, journal = {Networks}, number = {3}, arxiv = {http://arxiv.org/abs/2110.10978}, doi = {10.1002/net.22174}, pages = {277 -- 298}, year = {2023}, abstract = {We introduce the Targeted Multiobjective Dijkstra Algorithm (T-MDA), a label setting algorithm for the One-to-One Multiobjective Shortest Path (MOSP) Problem. It is based on the recently published Multiobjective Dijkstra Algorithm (MDA) and equips it with A*-like techniques. For any explored subpath, a label setting MOSP algorithm decides whether the subpath can be discarded or must be stored as part of the output. A major design choice is how to store subpaths from the moment they are first explored until the mentioned final decision can be made. The T-MDA combines the polynomially bounded size of the priority queue used in the MDA and alazy management of paths that are not in the queue. The running time bounds from the MDA remain valid. In practice, the T-MDA outperforms known algorithms from the literature and the increased memory consumption is negligible. In this paper, we benchmark the T-MDA against an improved version of the state of the art NAMOA∗drOne-to-One MOSP algorithm from the literature on a standard testbed.}, language = {en} } @inproceedings{MasingLindnerBorndoerfer2022, author = {Masing, Berenike and Lindner, Niels and Bornd{\"o}rfer, Ralf}, title = {Optimal Line Plans in the Parametric City and the Impact of In-Motion Costs}, booktitle = {Operations Research Proceedings 2021}, editor = {Trautmann, Norbert and Dr{\"a}gi, Mario}, publisher = {Springer, Cham}, isbn = {978-3-031-08623-6}, doi = {10.1007/978-3-031-08623-6_44}, pages = {295 -- 301}, year = {2022}, abstract = {Line planning in public transport involves determining vehicle routes and assigning frequencies of service such that travel demands are satisfied. We evaluate how line plans, which are optimal with respect to in-motion costs (IMC), the objective function depending purely on arc-lengths for both user and operator costs, performs with respect to the value of resources consumed (VRC). The latter is an elaborate, socio-economic cost function which includes discomfort caused by delay, boarding and alighting times, and transfers. Even though discomfort is a large contributing factor to VRC and is entirely disregarded in IMC,  we observe that the two cost functions are qualitatively comparable.}, language = {en} } @article{SchieweGoerigkLindner2023, author = {Schiewe, Philine and Goerigk, Marc and Lindner, Niels}, title = {Introducing TimPassLib - A Library for Integrated Periodic Timetabling and Passenger Routing}, volume = {4}, journal = {Operations Research Forum}, number = {3}, doi = {10.1007/s43069-023-00244-1}, pages = {64}, year = {2023}, abstract = {Classic models to derive a timetable for public transport often face a chicken-and-egg situation: A good timetable should offer passengers routes with small travel times, but the route choice of passengers depends on the timetable. While models that fix passenger routes were frequently considered in the literature, integrated models that simultaneously optimize timetables and passenger routes have seen increasing attention lately. This creates a growing need for a set of instances that allows to test and compare new algorithmic developments for the integrated problem. Our paper addresses this requirement by presenting TimPassLib, a new benchmark library of instances for integrated periodic timetabling and passenger routing.}, language = {en} } @inproceedings{BlancoBorndoerferMaristanydelasCasas2022, author = {Blanco, Marco and Bornd{\"o}rfer, Ralf and Maristany de las Casas, Pedro}, title = {An A* Algorithm for Flight Planning Based on Idealized Vertical Profiles}, volume = {106}, booktitle = {22nd Symposium on Algorithmic Approaches for Transportation Modelling, Optimization, and Systems (ATMOS 2022)}, doi = {10.4230/OASIcs.ATMOS.2022.1}, pages = {1:1 -- 1:15}, year = {2022}, abstract = {The Flight Planning Problem is to find a minimum fuel trajectory between two airports in a 3D airway network under consideration of the wind. We show that this problem is NP-hard, even in its most basic version. We then present a novel A∗ heuristic, whose potential function is derived from an idealized vertical profile over the remaining flight distance. This potential is, under rather general assumptions, both admissible and consistent and it can be computed efficiently. The method outperforms the state-of-the-art heuristic on real-life instances.}, language = {en} } @article{MasingLindnerBorndoerfer2022, author = {Masing, Berenike and Lindner, Niels and Bornd{\"o}rfer, Ralf}, title = {The price of symmetric line plans in the Parametric City}, volume = {166}, journal = {Transportation Research Part B: Methodological}, doi = {10.1016/j.trb.2022.10.009}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-88613}, pages = {419 -- 443}, year = {2022}, abstract = {We consider the line planning problem in public transport in the Parametric City, an idealized model that captures typical scenarios by a (small) number of parameters. The Parametric City is rotation symmetric, but optimal line plans are not always symmetric. This raises the question to quantify the symmetry gap between the best symmetric and the overall best solution. For our analysis, we formulate the line planning problem as a mixed integer linear program, that can be solved in polynomial time if the solutions are forced to be symmetric. We prove that the symmetry gap is small when a specific Parametric City parameter is fixed, and we give an approximation algorithm for line planning in the Parametric City in this case. While the symmetry gap can be arbitrarily large in general, we show that symmetric line plans are a good choice in most practical situations.}, language = {de} } @article{Beckenbach2020, author = {Beckenbach, Isabel}, title = {Von Graphen zu Hypergraphen}, journal = {OR News}, number = {70}, issn = {1437-2045}, year = {2020}, language = {en} } @inproceedings{GrimmBorndoerferBushe2023, author = {Grimm, Boris and Bornd{\"o}rfer, Ralf and Bushe, Julian}, title = {Assignment Based Resource Constrained Path Generation for Railway Rolling Stock Optimization}, volume = {115}, booktitle = {23rd Symposium on Algorithmic Approaches for Transportation Modelling, Optimization, and Systems (ATMOS 2023)}, publisher = {Schloss Dagstuhl--Leibniz-Zentrum fuer Informatik}, address = {Dagstuhl, Germany}, doi = {https://doi.org/10.4230/OASIcs.ATMOS.2023.13}, pages = {13:1 -- 13:15}, year = {2023}, abstract = {The fundamental task of every passenger railway operator is to offer an attractive railway timetable to the passengers while operating it as cost efficiently as possible. The available rolling stock has to be assigned to trips so that all trips are operated, operational requirements are satisfied, and the operating costs are minimum. This so-called Rolling Stock Rotation Problem (RSRP) is well studied in the literature. In this paper we consider an acyclic version of the RSRP that includes vehicle maintenance. As the latter is an important aspect, maintenance services have to be planned simultaneously to ensure the rotation's feasibility in practice. Indeed, regular maintenance is important for the safety and reliability of the rolling stock as well as enforced by law in many countries. We present a new integer programming formulation that links a hyperflow to model vehicle compositions and their coupling decisions to a set of path variables that take care of the resource consumption of the individual vehicles. To solve the model we developed different column generation algorithms which are compared to each other as well as to the MILP flow formulation of [Ralf Bornd{\"o}rfer et al., 2016] on a test set of real world instances.}, language = {en} } @inproceedings{BorndoerferGrimmSchade2023, author = {Bornd{\"o}rfer, Ralf and Grimm, Boris and Schade, Stanley}, title = {A Robustness Analysis of Long Distance Train Crew Schedules in Germany}, volume = {CCC 1}, booktitle = {Proceedings Of The Fifth Iinternational Conference On Railway Technology: Research, Development and Maintenance}, issn = {2753-3239}, doi = {10.4203/ccc.1.23.17}, year = {2023}, abstract = {Nowadays railway networks are highly complex and often very fragile systems. A wide variety of individual operations that influence each other have to go hand in hand to end up with a smoothly and efficiently running system. Many of these operations suffer from uncertainty as trains could be delayed, the signaling system be disrupted or scheduled crews could be ill. Usually these opartions could be organized hierarchically from long term strategical decisions to real time decision management. Each stage in the hierarchy defines a different mathematical optimization problem, which is solved sequentially. At every stage the knowledge about preceding or succeeding planning stages may vary and also the interaction between two stages in this chain of problems may vary from almost no interaction to highly dependent situations. This paper deals with a topic that is an example for the latter case, namely the interaction between vehicle schedules, vehicle punctuality, and crew schedules. To reduce the number of potential rescheduling actions we developed a software tool in cooperation with our practical partner DB Fernverkehr AG (DBF) to predict a certain set of critical crew schedules. This tool evaluates, predicts, and determines "bottlenecks" in the crew schedule in the sense of potentially required rescheduling actions due to likely delays. The approach was tested on real life crew and train timetable data of DBF and can be regarded as the computation of key performance indicators, which is often desired. For our experiments we had access to the operated timetable and crew schedule of DBF for periods of two and six weeks in 2019.}, language = {en} }