@phdthesis{Rehfeldt2021, author = {Rehfeldt, Daniel}, title = {Faster algorithms for Steiner tree and related problems: From theory to practice}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-85148}, year = {2021}, language = {en} } @phdthesis{Lenz2021, author = {Lenz, Ralf}, title = {Optimization of Stationary Expansion Planning and Transient Network Control by Mixed-Integer Nonlinear Programming}, doi = {10.14279/depositonce-12765}, year = {2021}, language = {en} } @phdthesis{HoppmannBaum2022, author = {Hoppmann-Baum, Kai}, title = {Mathematical programming for stable control and safe operation of gas transport networks}, publisher = {TU Berlin}, doi = {10.14279/depositonce-15837}, year = {2022}, abstract = {The fight against climate change makes extreme but inevitable changes in the energy sector necessary. These in turn lead to novel and complex challenges for the transmission system operators (TSOs) of gas transport networks. In this thesis, we consider four different planning problems emerging from real-world operations and present mathematical programming models and solution approaches for all of them. Due to regulatory requirements and side effects of renewable energy production, controlling today's gas networks with their involved topologies is becoming increasingly difficult. Based on the network station modeling concept for approximating the technical capabilities of complex subnetworks, e.g., compressor stations, we introduce a tri-level MIP model to determine important global control decisions. Its goal is to avoid changes in the network elements' settings while deviations from future inflow pressures as well as supplies and demands are minimized. A sequential linear programming inspired post-processing routine is run to derive physically accurate solutions w.r.t. the transient gas flow in pipelines. Computational experiments based on real-world data show that meaningful solutions are quickly and reliably determined. Therefore, the algorithmic approach is used within KOMPASS, a decision support system for the transient network control that we developed together with the Open Grid Europe GmbH (OGE), one of Europe's largest natural gas TSOs. Anticipating future use cases, we adapt the aforementioned algorithmic approach for hydrogen transport. We investigate whether the natural gas infrastructure can be repurposed and how the network control changes when energy-equivalent amounts of hydrogen are transported. Besides proving the need for purpose-built compressors, we observe that, due to the reduced linepack, the network control becomes more dynamic, compression energy increases by 440\% on average, and stricter regulatory rules regarding the balancing of supply and demand become necessary. Extreme load flows expose the technical limits of gas networks and are therefore of great importance to the TSOs. In this context, we introduce the Maximum Transportation Problem and the Maximum Potential Transport Moment Problem to determine severe transport scenarios. Both can be modeled as linear bilevel programs where the leader selects supplies and demands, maximizing the follower's transport effort. To solve them, we identify solution-equivalent instances with acyclic networks, provide variable bounds regarding their KKT reformulations, apply the big-M technique, and solve the resulting MIPs. A case study shows that the obtained scenarios exceed the maximum severity values of a provided test set by at least 23\%. OGE's transmission system is 11,540km long. Monitoring it is crucial for safe operations. To this end, we discuss the idea of using uncrewed aerial vehicles and introduce the Length-Constrained Cycle Partition Problem to optimize their routing. Its goal is to find a smallest cycle partition satisfying vertex-induced length requirements. Besides a greedy-style heuristic, we propose two MIP models. Combining them with symmetry-breaking constraints as well as valid inequalities and lower bounds from conflict hypergraphs yields a highly performant solution algorithm for this class of problems.}, language = {en} } @phdthesis{Streubel2022, author = {Streubel, Tom}, title = {Simulation of Piecewise Smooth Differential Algebraic Equations with Application to Gas Networks}, doi = {http://dx.doi.org/10.18452/24688}, school = {Humboldt-Universit{\"a}t zu Berlin}, year = {2022}, language = {en} } @phdthesis{Turner2024, author = {Turner, Mark}, title = {Cutting Plane Selection for Mixed-Integer Linear Programming}, year = {2024}, abstract = {Mixed-Integer Linear Programming (MILP) is a ubiquitous and practical modelling paradigm that is essential for optimising a broad range of real-world systems. The backbone of all modern MILP solvers is the branch-and-cut algorithm, which is a hybrid of the branch-and-bound and cutting planes algorithms. Cutting planes (cuts) are linear inequalities that tighten the relaxation of a MILP. While a lot of research has gone into deriving valid cuts for MILPs, less emphasis has been put on determining which cuts to select. Cuts in general are generated in rounds, and a subset of the generated cuts must be added to the relaxation. The decision on which subset of cuts to add is called cut selection. This is a crucial task since adding too many cuts makes the relaxation large and slow to optimise over. Conversely, adding too few cuts results in an insufficiently tightened relaxation, and more relaxations need to be enumerated. To further emphasise the difficulty, the effectiveness of an applied cut is both dependent on the other applied cuts, and the state of the MILP solver. In this thesis, we present theoretical results on the importance and difficulty of cut selection, as well as practical results that use cut selection to improve general MILP solver performance. Improving general MILP solver performance is of great importance for practitioners and has many runoff effects. Reducing the solve time of currently solved systems can directly improve efficiency within the application area. In addition, improved performance enables larger systems to be modelled and optimised, and MILP to be used in areas where it was previously impractical due to time restrictions. Each chapter of this thesis corresponds to a publication on cut selection, where the contributions of this thesis can naturally be divided into four components. The first two components are motivated by instance-dependent performance. In practice, for each subroutine, including cut selection, MILP solvers have adjustable parameters with hard-coded default values. It is ultimately unrealistic to expect these default values to perform well for every instance. Rather, it would be ideal if the parameters were dependent on the given instance. To show this motivation is well founded, we first introduce a family of parametric MILP instances and cuts to showcase worst-case performance of cut selection for any fixed parameter value. We then introduce a graph neural network architecture and reinforcement learning framework for learning instance-dependent cut scoring parameters. In the following component, we formalise language for determining if a cut has theoretical usefulness from a polyhedral point of view in relation to other cuts. In addition, to overcome issues of infeasible projections and dual degeneracy, we introduce analytic center based distance measures. We then construct a lightweight multi-output regression model that predicts relative solver performance of an instance for a set of distance measures. The final two components are motivated by general MILP solver improvement via cut selection. Such improvement was shown to be possible, albeit difficult to achieve, by the first half of this thesis. We relate branch-and-bound and cuts through their underlying disjunctions. Using a history of previously computed Gomory mixed-integer cuts, we reduce the solve time of SCIP over the 67\% of affected MIPLIB 2017 instances by 4\%. In the final component, we introduce new cut scoring measures and filtering methods based on information from other MILP solving processes. The new cut selection techniques reduce the solve time of SCIP over the 97\% of affected MIPLIB 2017 instances by 5\%.}, language = {en} } @phdthesis{Hennings2023, author = {Hennings, Felix}, title = {Modeling and solving real-world transient gas network transport problems using mathematical programming}, year = {2023}, abstract = {This thesis considers the transient gas network control optimization problem for on-shore pipeline-based transmission networks with numerous gas routing options. As input, the problem is given the network's topology, its initial state, and future demands at the boundaries of the network, which prescribe the gas flow exchange and potentially the pressure values. The task is to find a set of future control measures for all the active, i.e., controllable, elements in the network that minimizes a combination of different penalty functions. The problem is examined in the context of a decision support tool for gas network dispatchers. This results in detailed models featuring a diverse set of constraints, large and challenging real-world instances, and demanding time limit requirements. All these factors further complicate the problem, which is already difficult to solve in theory due to the inherent combination of non-linear and combinatorial aspects. Our contributions concern different steps of the process of solving the problem. Regarding the model formulation, we investigate the validity of two common approximations of the gas flow description in transport pipes: neglecting the inertia term and assuming a friction term that linearly depends on the gas flow and the pressure. For both, we examine if they can be applied under real-world conditions by evaluating a large amount of historical state data of the network of our project partner, the gas network operator Open Grid Europe. While we can confirm that it is reasonable to ignore the influence of the inertia term, the friction term linearization leads to significant errors and, as a consequence, cannot be used for describing the general gas flow behavior in transport pipes. As another topic of this thesis, we introduce the target value concept as a more realistic approach to express control actions of dispatchers regarding regulators and compressor stations. Here, we derive the mechanisms defined for target values based on the gas flow principles in pipes and develop a mixed-integer programming model capturing their behavior. The accuracy of this model is demonstrated in comparison to a target-value-based industry-standard simulator. Furthermore, we present two heuristics for the transient gas network control optimization problem featuring target values that are based on approximative models for the target-value-based control and determine the final decisions in a post-processing step. To compare the performance of the two heuristics with the approach of directly solving the corresponding model, we evaluate them on a set of artificially created test instances. Finally, we develop problem-specific algorithms for two variants of the described problem. One considers the control optimization for a single network station, which represents a local operation site featuring a large number of active elements. The used transient model is very detailed and includes a sophisticated representation of the compressor stations. Based on the shortness of the pipes in the station, the corresponding algorithm finds valid solutions by solving a series of stationary model variants as well as a transient rolling horizon approach. As the second variant, we consider the problem on the entire network but assume an approximative model representing the control capabilities of network stations. Aside from a new description of the compression capabilities, we introduce an algorithm that uses a combination of sequential mixed-integer programming, two heuristics based on reduced time horizons, and a specialized dynamic branch-and-bound node limit to determine promising values for the binary variables of the model. Complete solutions for the problem are obtained by fixing the binary values and solving the remaining non-linear program. Both algorithms are investigated in extensive empirical studies based on real-world instances of the corresponding model variants.}, language = {en} }