@misc{SchielaWeiser2010, author = {Schiela, Anton and Weiser, Martin}, title = {Barrier methods for a control problem from hyperthermia treatment planning}, journal = {Recent Advances in Optimization and its Applications in Engineering (Proceedings of 14th Belgian-French-German Conference on Optimization 2009)}, editor = {Diehl, M. and Glineur, F. and Jarlebring, E. and Michiels, W.}, publisher = {Springer}, pages = {419 -- 428}, year = {2010}, abstract = {We consider an optimal control problem from hyperthermia treatment planning and its barrier regularization. We derive basic results, which lay the groundwork for the computation of optimal solutions via an interior point path-following method. Further, we report on a numerical implementation of such a method and its performance at an example problem.}, language = {en} } @misc{GoetschelMaierhoferMuelleretal.2016, author = {G{\"o}tschel, Sebastian and Maierhofer, Christiane and M{\"u}ller, Jan P. and Rothbart, Nick and Weiser, Martin}, title = {Quantitative Defect Reconstruction in Active Thermography for Fiber-Reinforced Composites}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-58374}, year = {2016}, abstract = {Carbon-fiber reinforced composites are becoming more and more important in the production of light-weight structures, e.g., in the automotive and aerospace industry. Thermography is often used for non-destructive testing of these products, especially to detect delaminations between different layers of the composite. In this presentation, we aim at methods for defect reconstruction from thermographic measurements of such carbon-fiber reinforced composites. The reconstruction results shall not only allow to locate defects, but also give a quantitative characterization of the defect properties. We discuss the simulation of the measurement process using finite element methods, as well as the experimental validation on flat bottom holes. Especially in pulse thermography, thin boundary layers with steep temperature gradients occurring at the heated surface need to be resolved. Here we use the combination of a 1D analytical solution combined with numerical solution of the remaining defect equation. We use the simulations to identify material parameters from the measurements. Finally, fast heuristics for reconstructing defect geometries are applied to the acquired data, and compared for their accuracy and utility in detecting different defects like back surface defects or delaminations.}, language = {en} } @book{Weiser2016, author = {Weiser, Martin}, title = {Inside Finite Elements}, publisher = {De Gruyter}, year = {2016}, abstract = {All relevant implementation aspects of finite element methods are discussed in this book. The focus is on algorithms and data structures as well as on their concrete implementation. Theory is covered as far as it gives insight into the construction of algorithms.Throughout the exercises a complete FE-solver for scalar 2D problems will be implemented in Matlab/Octave.}, language = {en} } @misc{Weiser2007, author = {Weiser, Martin}, title = {Pointwise Nonlinear Scaling for Reaction-Diffusion-Equations}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-10493}, number = {07-45}, year = {2007}, abstract = {Parabolic reaction-diffusion systems may develop sharp moving reaction fronts which pose a challenge even for adaptive finite element methods. We propose a method to transform the equation into an equivalent form that usually exhibits solutions which are easier to discretize, giving higher accuracy for a given number of degrees of freedom. The transformation is realized as an efficiently computable pointwise nonlinear scaling that is optimized for prototypical planar travelling wave solutions of the underlying reaction-diffusion equation. The gain in either performance or accuracy is demonstrated on different numerical examples.}, language = {en} } @misc{SchenkWaechterWeiser2007, author = {Schenk, Olaf and W{\"a}chter, Andreas and Weiser, Martin}, title = {Inertia Revealing Preconditioning For Large-Scale Nonconvex Constrained Optimization}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-10314}, number = {07-32}, year = {2007}, abstract = {Fast nonlinear programming methods following the all-at-once approach usually employ Newton's method for solving linearized Karush-Kuhn-Tucker (KKT) systems. In nonconvex problems, the Newton direction is only guaranteed to be a descent direction if the Hessian of the Lagrange function is positive definite on the nullspace of the active constraints, otherwise some modifications to Newton's method are necessary. This condition can be verified using the signs of the KKT's eigenvalues (inertia), which are usually available from direct solvers for the arising linear saddle point problems. Iterative solvers are mandatory for very large-scale problems, but in general do not provide the inertia. Here we present a preconditioner based on a multilevel incomplete \$LBL^T\$ factorization, from which an approximation of the inertia can be obtained. The suitability of the heuristics for application in optimization methods is verified on an interior point method applied to the CUTE and COPS test problems, on large-scale 3D PDE-constrained optimal control problems, as well as 3D PDE-constrained optimization in biomedical cancer hyperthermia treatment planning. The efficiency of the preconditioner is demonstrated on convex and nonconvex problems with \$150^3\$ state variables and \$150^2\$ control variables, both subject to bound constraints.}, language = {en} } @misc{Mathew2021, type = {Master Thesis}, author = {Mathew, Maria}, title = {Numerical treatment of radiative heat transfer on cooling process}, pages = {53}, year = {2021}, abstract = {This thesis examines how taking into account surface to surface radiation impacts the cooling process in general. We formulate the non local bound- ary condition after introducing the general setting for the cooling model. In section 3, the mathematical description of the radiative heat transfer is dis- cussed. We cover the implementation of the radiative matrix in section 4, which is followed by a brief explanation of the radiative matrix's structure and several techniques to dealing with the accompanying challenges. We investigate the importance of radiative heat transport by applying the given approach to a two-dimensional geometry and computing the ensuing cooling curves. We compare the findings of our computation to those ac- quired from experiment conducted and find that they are extremely similar. There is a considerable difference (of about 35\%) in the time of cooling of the surface where there is a possibility of influence of radiation from the second surface to that of the surface with no influence at all. Although it is possible to infer that heat convection plays a role in the total result, this has yet to be proved. However, one can clearly see the significance of the surface to surface radiative heat transfer on these parts confirming the research question posed at the begining. The effect of the surface to surface radiative heat transfer has an influence on the resulting cooling time and should be considered in the model.}, language = {en} } @article{GoebelHuynhCheginietal.2025, author = {G{\"o}bel, Fritz and Huynh, Ngoc Mai Monica and Chegini, Fatemeh and Pavarino, Luca and Weiser, Martin and Scacchi, Simone and Anzt, Hartwig}, title = {A BDDC Preconditioner for the Cardiac EMI Model in three Dimensions}, journal = {SIAM J. Sci. Comput.}, arxiv = {http://arxiv.org/abs/2502.07722}, year = {2025}, abstract = {We analyze a Balancing Domain Decomposition by Constraints (BDDC) preconditioner for the solution of three dimensional composite Discontinuous Galerkin discretizations of reaction-diffusion systems of ordinary and partial differential equations arising in cardiac cell-by-cell models like the Extracellular space, Membrane and Intracellular space (EMI) Model. These microscopic models are essential for the understanding of events in aging and structurally diseased hearts which macroscopic models relying on homogenized descriptions of the cardiac tissue, like Monodomain and Bidomain models, fail to adequately represent. The modeling of each individual cardiac cell results in discontinuous global solutions across cell boundaries, requiring the careful construction of dual and primal spaces for the BDDC preconditioner. We provide a scalable condition number bound for the precondition operator and validate the theoretical results with extensive numerical experiments.}, language = {en} } @misc{WeiserChegini2022, author = {Weiser, Martin and Chegini, Fatemeh}, title = {Higher-order time integration using spectral deferred correction method (SDC) in a cell by cell discretization of cardiac excitation}, doi = {10.35097/716}, year = {2022}, abstract = {This C++ code implements a cell-by-cell model of cardiac excitation using a piecewise-continuous finite element discretization and spectral deferred correction time stepping. The code is based on the Kaskade 7 finite element toolbox and forms a prototype for the µCarp code to be implemented in the Microcard project.}, language = {en} } @article{SemlerWeiser2023, author = {Semler, Phillip and Weiser, Martin}, title = {Adaptive Gaussian Process Regression for Efficient Building of Surrogate Models in Inverse Problems}, volume = {39}, journal = {Inverse Problems}, number = {12}, arxiv = {http://arxiv.org/abs/2303.05824}, doi = {10.1088/1361-6420/ad0028}, pages = {125003}, year = {2023}, abstract = {In a task where many similar inverse problems must be solved, evaluating costly simulations is impractical. Therefore, replacing the model y with a surrogate model y(s) that can be evaluated quickly leads to a significant speedup. The approximation quality of the surrogate model depends strongly on the number, position, and accuracy of the sample points. With an additional finite computational budget, this leads to a problem of (computer) experimental design. In contrast to the selection of sample points, the trade-off between accuracy and effort has hardly been studied systematically. We therefore propose an adaptive algorithm to find an optimal design in terms of position and accuracy. Pursuing a sequential design by incrementally appending the computational budget leads to a convex and constrained optimization problem. As a surrogate, we construct a Gaussian process regression model. We measure the global approximation error in terms of its impact on the accuracy of the identified parameter and aim for a uniform absolute tolerance, assuming that y(s) is computed by finite element calculations. A priori error estimates and a coarse estimate of computational effort relate the expected improvement of the surrogate model error to computational effort, resulting in the most efficient combination of sample point and evaluation tolerance. We also allow for improving the accuracy of already existing sample points by continuing previously truncated finite element solution procedures.}, language = {en} } @article{UllrichWeiserSubramaniametal.2023, author = {Ullrich, Julia and Weiser, Martin and Subramaniam, Jayant and Schenkl, Sebastian and Muggenthaler, Holger and Hubig, Michael and Mall, Gita}, title = {The impact of anatomy variation on temperature based time of death estimation}, volume = {137}, journal = {International Journal of Legal Medicine}, doi = {10.1007/s00414-023-03026-w}, pages = {1615 -- 1627}, year = {2023}, abstract = {Temperature-based time of death estimation (TTDE) using simulation methods such as the finite element (FE) method promises higher accuracy and broader applicability in nonstandard cooling scenarios than established phenomenological methods. Their accuracy depends crucially on the simulation model to capture the actual situation. The model fidelity in turn hinges on the representation of the corpse's anatomy in form of computational meshes as well as on the thermodynamic parameters. While inaccuracies in anatomy representation due to coarse mesh resolution are known to have a minor impact on the estimated time of death, the sensitivity with respect to larger differences in the anatomy has so far not been studied. We assess this sensitivity by comparing four independently generated and vastly different anatomical models in terms of the estimated time of death in an identical cooling scenario. In order to isolate the impact of shape variation, the models are scaled to a reference size, and the possible impact of measurement location variation is excluded explicitly, which gives a lower bound on the impact of anatomy on the estimated time of death.}, language = {en} } @inproceedings{CheginiSteinkeWeiser2022, author = {Chegini, Fatemeh and Steinke, Thomas and Weiser, Martin}, title = {Efficient adaptivity for simulating cardiac electrophysiology with spectral deferred correction methods}, arxiv = {http://arxiv.org/abs/2311.07206}, year = {2022}, abstract = {The locality of solution features in cardiac electrophysiology simulations calls for adaptive methods. Due to the overhead incurred by established mesh refinement and coarsening, however, such approaches failed in accelerating the computations. Here we investigate a different route to spatial adaptivity that is based on nested subset selection for algebraic degrees of freedom in spectral deferred correction methods. This combination of algebraic adaptivity and iterative solvers for higher order collocation time stepping realizes a multirate integration with minimal overhead. This leads to moderate but significant speedups in both monodomain and cell-by-cell models of cardiac excitation, as demonstrated at four numerical examples.}, language = {en} }