@article{FaerberTitschackSchoenbergetal.2016, author = {F{\"a}rber, Claudia and Titschack, J{\"u}rgen and Sch{\"o}nberg, Christine H. L. and Ehrig, Karsten and Boos, Karin and Baum, Daniel and Illerhaus, Bernd and Asgaard, Ulla and Bromley, Richard G. and Freiwald, Andr{\´e} and Wisshak, Max}, title = {Long-term macrobioerosion in the Mediterranean Sea assessed by micro-computed tomography}, volume = {13}, journal = {Biogeosciences}, number = {11}, address = {http://www.biogeosciences.net/13/3461/2016/}, doi = {10.5194/bg-13-3461-2016}, pages = {3461 -- 3474}, year = {2016}, abstract = {Biological erosion is a key process for the recycling of carbonate and the formation of calcareous sediments in the oceans. Experimental studies showed that bioerosion is subject to distinct temporal variability, but previous long-term studies were restricted to tropical waters. Here, we present results from a 14-year bioerosion experiment that was carried out along the rocky limestone coast of the island of Rhodes, Greece, in the Eastern Mediterranean Sea, in order to monitor the pace at which bioerosion affects carbonate substrate and the sequence of colonisation by bioeroding organisms. Internal macrobioerosion was visualised and quantified by micro-computed tomography and computer-algorithm-based segmentation procedures. Analysis of internal macrobioerosion traces revealed a dominance of bioeroding sponges producing eight types of characteristic Entobia cavity networks, which were matched to five different clionaid sponges by spicule identification in extracted tissue. The morphology of the entobians strongly varied depending on the species of the producing sponge, its ontogenetic stage, available space, and competition by other bioeroders. An early community developed during the first 5 years of exposure with initially very low macrobioerosion rates and was followed by an intermediate stage when sponges formed large and more diverse entobians and bioerosion rates increased. After 14 years, 30 \% of the block volumes were occupied by boring sponges, yielding maximum bioerosion rates of 900 g m^-2 yr^-1. A high spatial variability in macrobioerosion prohibited clear conclusions about the onset of macrobioerosion equilibrium conditions. This highlights the necessity of even longer experimental exposures and higher replication at various factor levels in order to better understand and quantify temporal patterns of macrobioerosion in marine carbonate environments.}, language = {en} } @phdthesis{Dercksen2015, author = {Dercksen, Vincent J.}, title = {Visual computing techniques for the reconstruction and analysis of anatomically realistic neural networks}, year = {2015}, abstract = {To understand how the brain translates sensory input into behavior, one needs to identify, at the cellular level, the involved neural circuitry and the electrical signals it carries. This thesis describes methods and tools that enable neuroscientists to obtain important anatomical data, including neuron numbers and shapes, from 3D microscopy images. On this basis, tools have been developed to create and visually analyze anatomically realistic 3D models of neural networks: 1. An automatic segmentation method for determining the number and location of neuron cell bodies in 3D microscopy images. Application of this method yields a difference of merely ∼4\% between automatically and manually counted cells, which is sufficiently accurate for application in large-scale counting experiments. 2. A method for the automatic alignment of 3D section volumes containing filamentous structures. To this end, an existing point-matching-based method has been adapted such that sections containing neuron and microtubule fragments could be successfully aligned. 3. The Filament Editor, a 3D proof-editing tool for visual verification and correction of automatically traced filaments. The usefulness of the Filament Editor is demonstrated by applying it in a validated neuron reconstruction pipeline to create 3D models of long-range and complex neuronal branches. 4. The tool NeuroNet, which is used to assemble an anatomical model of a neural network representing the rat barrel cortex (or subnetworks therein, e.g. individual cortical columns), based on reconstructed anatomical data, such as neuron distributions and 3D morphologies. The tool estimates synaptic connectivity between neurons based on structural overlap between axons and dendrites. 5. A framework for the interactive visual analysis of synaptic connectivity in such networks at multiple scales. It works from the level of neuron populations down to individual synapse positions on dendritic trees. It comprises the Cortical Column Connectivity Viewer, developed to analyze synaptic connections between neuron populations within and between cortical columns. The usefulness of these methods is demonstrated by applying them to reconstruct and analyze neural networks in the rat barrel cortex. Finally, I describe several applications of these methods and tools by neuroscientists, yielding significant biological findings regarding neuron anatomy and connectivity.}, language = {en} } @misc{KozlikovaKroneFalketal.2015, author = {Kozlikova, Barbora and Krone, Michael and Falk, Martin and Lindow, Norbert and Baaden, Marc and Baum, Daniel and Viola, Ivan and Parulek, Julius and Hege, Hans-Christian}, title = {Visualization of Biomolecular Structures: State of the Art}, issn = {1438-0064}, doi = {10.2312/eurovisstar.20151112}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-57217}, year = {2015}, abstract = {Structural properties of molecules are of primary concern in many fields. This report provides a comprehensive overview on techniques that have been developed in the fields of molecular graphics and visualization with a focus on applications in structural biology. The field heavily relies on computerized geometric and visual representations of three-dimensional, complex, large, and time-varying molecular structures. The report presents a taxonomy that demonstrates which areas of molecular visualization have already been extensively investigated and where the field is currently heading. It discusses visualizations for molecular structures, strategies for efficient display regarding image quality and frame rate, covers different aspects of level of detail, and reviews visualizations illustrating the dynamic aspects of molecular simulation data. The survey concludes with an outlook on promising and important research topics to foster further success in the development of tools that help to reveal molecular secrets.}, language = {en} } @article{Zachow2015, author = {Zachow, Stefan}, title = {Computational Planning in Facial Surgery}, volume = {31}, journal = {Facial Plastic Surgery}, number = {5}, doi = {10.1055/s-0035-1564717}, pages = {446 -- 462}, year = {2015}, abstract = {This article reflects the research of the last two decades in computational planning for cranio-maxillofacial surgery. Model-guided and computer-assisted surgery planning has tremendously developed due to ever increasing computational capabilities. Simulators for education, planning, and training of surgery are often compared with flight simulators, where maneuvers are also trained to reduce a possible risk of failure. Meanwhile, digital patient models can be derived from medical image data with astonishing accuracy and thus can serve for model surgery to derive a surgical template model that represents the envisaged result. Computerized surgical planning approaches, however, are often still explorative, meaning that a surgeon tries to find a therapeutic concept based on his or her expertise using computational tools that are mimicking real procedures. Future perspectives of an improved computerized planning may be that surgical objectives will be generated algorithmically by employing mathematical modeling, simulation, and optimization techniques. Planning systems thus act as intelligent decision support systems. However, surgeons can still use the existing tools to vary the proposed approach, but they mainly focus on how to transfer objectives into reality. Such a development may result in a paradigm shift for future surgery planning.}, language = {en} } @misc{LamasRodriguezEhlkeHoffmannetal.2015, author = {Lamas-Rodr{\´i}guez, Juli{\´a}n and Ehlke, Moritz and Hoffmann, Ren{\´e} and Zachow, Stefan}, title = {GPU-accelerated denoising of large tomographic data sets with low SNR}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-56339}, year = {2015}, abstract = {Enhancements in tomographic imaging techniques facilitate non-destructive methods for visualizing fossil structures. However, to penetrate dense materials such as sediments or pyrites, image acquisition is typically performed with high beam energy and very sensitive image intensifiers, leading to artifacts and noise in the acquired data. The analysis of delicate fossil structures requires the images to be captured in maximum resolution, resulting in large data sets of several giga bytes (GB) in size. Since the structural information of interest is often almost in the same spatial range as artifacts and noise, image processing and segmentation algorithms have to cope with a very low signal-to-noise ratio (SNR). Within this report we present a study on the performance of a collection of denoising algorithms applied to a very noisy fossil dataset. The study shows that a non-local means (NLM) filter, in case it is properly configured, is able to remove a considerable amount of noise while preserving most of the structural information of interest. Based on the results of this study, we developed a software tool within ZIBAmira that denoises large tomographic datasets using an adaptive, GPU-accelerated NLM filter. With the help of our implementation a user can interactively configure the filter's parameters and thus its effectiveness with respect to the data of interest, while the filtering response is instantly visualized for a preselected region of interest (ROI). Our implementation efficiently denoises even large fossil datasets in a reasonable amount of time.}, language = {en} } @inproceedings{KozlikovaKroneLindowetal.2015, author = {Kozlikova, Barbora and Krone, Michael and Lindow, Norbert and Falk, Martin and Baaden, Marc and Baum, Daniel and Viola, Ivan and Parulek, Julius and Hege, Hans-Christian}, title = {Visualization of Biomolecular Structures: State of the Art}, booktitle = {EuroVis 2015 STARS Proceedings}, doi = {10.2312/eurovisstar.20151112}, pages = {61 -- 81}, year = {2015}, abstract = {Structural properties of molecules are of primary concern in many fields. This report provides a comprehensive overview on techniques that have been developed in the fields of molecular graphics and visualization with a focus on applications in structural biology. The field heavily relies on computerized geometric and visual representations of three-dimensional, complex, large, and time-varying molecular structures. The report presents a taxonomy that demonstrates which areas of molecular visualization have already been extensively investigated and where the field is currently heading. It discusses visualizations for molecular structures, strategies for efficient display regarding image quality and frame rate, covers different aspects of level of detail, and reviews visualizations illustrating the dynamic aspects of molecular simulation data. The report concludes with an outlook on promising and important research topics to enable further success in advancing the knowledge about interaction of molecular structures.}, language = {en} } @article{GreweSchreiberZachow2015, author = {Grewe, Carl Martin and Schreiber, Lisa and Zachow, Stefan}, title = {Fast and Accurate Digital Morphometry of Facial Expressions}, volume = {31}, journal = {Facial Plastic Surgery}, number = {05}, publisher = {Thieme Medical Publishers}, address = {New York}, doi = {10.1055/s-0035-1564720}, pages = {431 -- 438}, year = {2015}, language = {en} } @misc{KuhnTroemel2015, author = {Kuhn, Alexander and Tr{\"o}mel, Silke}, title = {Intercomparison Study of Cloud Feature Extraction and Tracking Algorithms}, volume = {17}, journal = {Geophysical Research Abstracts, Vol 17}, pages = {ID 14128}, year = {2015}, abstract = {Clouds and precipitation systems are fundamental features in the global climate cycle and are one focus aspect of recent high resolution, cloud resolving simulations and measurement modalities. Highly resolved data sources allow for more precise methodologies to extract and track cloud features on different scales and enable novel evaluation tasks such as life-cycle tracking, feature-based statistics, and feature-based comparison of simulation and measurements. However, their complex dynamics and highly variable shape morphology makes extraction and tracking of clouds a challenging task with respect to stable and reliable algorithms. In this work we will present our efforts on establishing an community-wide inter-comparison study to provide an overview of state-of-the-art algorithms for cloud extraction and tracking. We propose a set of 2D and 3D benchmark data sets (from simulations and measurements) that are used as a common basis for comparison. In addition we describe a joint feature-based evaluation framework and provide an in depth analysis and comparison of those algorithms. The goal is to systematically compare and assess numerical extraction and tracking techniques for cloud features in meteorological data and provide a comprehensive overview of suitable application scenarios, describe current strengths and limitations, and derive statements about their variability for feature-based analysis tasks.}, language = {en} } @misc{DeuflhardHege2015, author = {Deuflhard, Peter and Hege, Hans-Christian}, title = {Raumtiefe in Malerei und Computergrafik}, journal = {R{\"a}ume - Bilder - Kulturen}, editor = {Lepper, Verena and Deuflhard, Peter and Markschies, Christoph}, publisher = {Walter De Gruyter}, isbn = {978-3-11-035993-0}, pages = {33 -- 46}, year = {2015}, abstract = {Einf{\"u}hrung: Die Tiefenwirkung dreidimensionaler R{\"a}ume in einem zweidimensionalen Bild einzufangen, ist ein Faszinosum nahezu aller Kulturen der Menschheitsgeschichte. Der vorliegende Aufsatz folgt den Spuren dieses Faszinosums, vergleichend in der Malerei und der mathematisierten Computergrafik. Die Entdeckung der Zentralperspektive in der italienischen Renaissance zeigt bereits den engen Zusammenhang von Malerei und Mathematik. Auf der Suche nach Maltechniken, mit denen Raumtiefe bildnerisch dargestellt werden kann, beginnen wir in Kap. 2 mit einem chronologischen Gang durch verschiedene Epochen der europ{\"a}ischen Malerei. Hieraus abgeleitete Prinzipien, soweit sie im Rechner realisierbar scheinen, stellen wir in Kap. 3 am Beispiel moderner Methoden der mathematischen Visualisierung vor.}, language = {de} } @incollection{LameckerZachow2016, author = {Lamecker, Hans and Zachow, Stefan}, title = {Statistical Shape Modeling of Musculoskeletal Structures and Its Applications}, volume = {23}, booktitle = {Computational Radiology for Orthopaedic Interventions}, publisher = {Springer}, isbn = {978-3-319-23481-6}, doi = {10.1007/978-3-319-23482-3}, pages = {1 -- 23}, year = {2016}, abstract = {Statistical shape models (SSM) describe the shape variability contained in a given population. They are able to describe large populations of complex shapes with few degrees of freedom. This makes them a useful tool for a variety of tasks that arise in computer-aided madicine. In this chapter we are going to explain the basic methodology of SSMs and present a variety of examples, where SSMs have been successfully applied.}, language = {en} } @article{ZachowHeppt2015, author = {Zachow, Stefan and Heppt, Werner}, title = {The Facial Profile}, volume = {31}, journal = {Facial Plastic Surgery}, number = {5}, doi = {10.1055/s-0035-1566132}, pages = {419 -- 420}, year = {2015}, abstract = {Facial appearance in our societies is often associated with notions of attractiveness, juvenileness, beauty, success, and so forth. Hence, the role of facial plastic surgery is highly interrelated to a patient's desire to feature many of these positively connoted attributes, which of course, are subject of different cultural perceptions or social trends. To judge about somebody's facial appearance, appropriate quantitative measures as well as methods to obtain and compare individual facial features are required. This special issue on facial profile is intended to provide an overview on how facial characteristics are surgically managed in an interdisciplinary way based on experience, instrumentation, and modern technology to obtain an aesthetic facial appearance with harmonious facial proportions. The facial profile will be discussed within the context of facial aesthetics. Latest concepts for capturing facial morphology in high speed and impressive detail are presented for quantitative analysis of even subtle changes, aging effects, or facial expressions. In addition, the perception of facial profiles is evaluated based on eye tracking technology.}, language = {en} }