@misc{OezelKulkarniHasanetal., author = {{\"O}zel, M. Neset and Kulkarni, Abhishek and Hasan, Amr and Brummer, Josephine and Moldenhauer, Marian and Daumann, Ilsa-Maria and Wolfenberg, Heike and Dercksen, Vincent J. and Kiral, F. Ridvan and Weiser, Martin and Prohaska, Steffen and von Kleist, Max and Hiesinger, Peter Robin}, title = {Serial synapse formation through filopodial competition for synaptic seeding factors}, issn = {1438-0064}, doi = {10.1016/j.devcel.2019.06.014}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-74397}, abstract = {Following axon pathfinding, growth cones transition from stochastic filopodial exploration to the formation of a limited number of synapses. How the interplay of filopodia and synapse assembly ensures robust connectivity in the brain has remained a challenging problem. Here, we developed a new 4D analysis method for filopodial dynamics and a data-driven computational model of synapse formation for R7 photoreceptor axons in developing Drosophila brains. Our live data support a 'serial synapse formation' model, where at any time point only a single 'synaptogenic' filopodium suppresses the synaptic competence of other filopodia through competition for synaptic seeding factors. Loss of the synaptic seeding factors Syd-1 and Liprin-α leads to a loss of this suppression, filopodial destabilization and reduced synapse formation, which is sufficient to cause the destabilization of entire axon terminals. Our model provides a filopodial 'winner-takes-all' mechanism that ensures the formation of an appropriate number of synapses.}, language = {en} } @misc{ZakrzewskaD'AndreagiovanniRueppetal., author = {Zakrzewska, Anna and D'Andreagiovanni, Fabio and Ruepp, Sarah and Berger, Michael S.}, title = {Biobjective Optimization of Radio Access Technology Selection and Resource Allocation in Heterogeneous Wireless Networks}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42675}, abstract = {We propose a novel optimization model for resource assignment in heterogeneous wireless network. The model adopts two objective functions maximizing the number of served users and the minimum granted utility at once. A distinctive feature of our new model is to consider two consecutive time slots, in order to include handover as an additional decision dimension. Furthermore, the solution algorithm that we propose refines a heuristic solution approach recently proposed in literature, by considering a real joint optimization of the considered resources. The simulation study shows that the new model leads to a significant reduction in handover frequency, when compared to a traditional scheme based on maximum SNR.}, language = {en} } @misc{Wolf, author = {Wolf, Thomas}, title = {A Study of Genetic Algorithms solving a combinatorial Puzzle}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-3445}, number = {SC-98-01}, abstract = {The suitability of Genetic Algorithms (GAs) to solve a combinatorial problem with only one solution is investigated. The dependence of the performance is studied for GA-hard and GA-soft fitness functions, both with a range of different parameter values and different encodings.}, language = {en} } @misc{Witzig, type = {Master Thesis}, author = {Witzig, Jakob}, title = {Reoptimization Techniques in MIP Solvers}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-54067}, pages = {176}, abstract = {Many optimization problems can be modeled as Mixed Integer Programs (MIPs). In general, MIPs cannot be solved efficiently, since solving MIPs is NP-hard, see, e.g., Schrijver, 2003. Common methods for solving NP-hard problems are branch-and-bound and column generation. In the case of column generation, the original problem becomes decomposed or re-formulated into one ore more smaller subproblems, which are easier to solve. Each of these subproblems is solved separately and recurrently, which can be interpreted as solving a sequence of optimization problems. In this thesis, we consider a sequence of MIPs which only differ in the respective objective functions. Furthermore, we assume each of these MIPs get solved with a branch-and-bound algorithm. This thesis aims to figure out whether the solving process of a given sequence of MIPs can be accelerated by reoptimization. As reoptimization we understand starting the solving process of a MIP of this sequence at a given frontier of a search tree corresponding to another MIP of this sequence. At the beginning we introduce an LP-based branch-and-bound algorithm. This algorithm is inspired by the reoptimizing algorithm of Hiller, Klug, and the author of this thesis, 2013. Since most of the state-of-the-art MIP solvers come to decisions based on dual information, which leads to the loss of feasible solutions after changing the objective function, we present a technique to guarantee optimality despite using these information. A decision is based on a dual information if this decision is valid for at least one feasible solution, whereas a decision is based on a primal information if this decision is valid for all feasible solutions. Afterwards, we consider representing the search frontier of the tree by a set of nodes of a given size. We call this the Tree Compression Problem. Moreover, we present a criterion characterizing the similarity of two objective functions. To evaluate our approach of reoptimization we extend the well-known and well-maintained MIP solver SCIP to an LP-based branch-and-bound framework, introduce two heuristics for solving the Tree Compression Problem, and a primal heuristic which is especially fitted to column generation. Finally, we present computational experiments on several problem classes, e.g., the Vertex Coloring and k-Constrained Shortest Path. Our experiments show, that a straightforward reoptimization, i.e., without additional heuristics, provides no benefit in general. However, in combination with the techniques and methods presented in this thesis, we can accelerate the solving of a given sequence up to the factor 14. For this purpose it is essential to take the differences of the objective functions into account and to restart the reoptimization, i.e., solve the subproblem from scratch, if the objective functions are not similar enough. Finally, we discuss the possibility to parallelize the solving process of the search frontier at the beginning of each solving process.}, language = {en} } @masterthesis{Witzig, type = {Bachelor Thesis}, author = {Witzig, Jakob}, title = {Effiziente Reoptimierung in Branch\&Bound-Verfahren f{\"u}r die Steuerung von Aufz{\"u}gen}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42210}, school = {Zuse Institute Berlin (ZIB)}, pages = {111}, abstract = {Heutzutage ist eine Vielzahl der mehrst{\"o}ckigen Geb{\"a}ude mit Personenaufzugsgruppen ausgestattet. Uns wohl bekannt sind die sogenannten konventionellen Systeme. Bei diesen Systemen bet{\"a}tigt jeder ankommende Passagier eine der beiden Richtungstasten und teilt dem dahinterstehenden Steuerungsalgorithmus seine gew{\"u}nschte Startetage und Fahrtrichtung mit. Betreten wird der zuerst auf der Startetage ankommende Aufzug mit gleicher Fahrtrichtung und ausreichend Kapazit{\"a}t. Die entsprechende Zieletage wird dem System erst nach dem Betreten der Fahrgastkabine mitgeteilt. Neben diesen konventionellen Systemen gibt es Aufzugsgruppen mit Zielrufsteuerung. Die Besonderheit eines zielrufgesteuerten Systems ist, dass ein ankommender Passagier bereits auf der Startetage seine gew{\"u}nschte Zieletage angibt und eine R{\"u}ckmeldung vom System erh{\"a}lt, welchen Aufzug er nutzen soll. Diese Zuweisung durch das System hat das Ziel, die Warte- und Reisezeiten der Passagiere zu minimieren. Ein wesentlicher Faktor bei der Berechnung warte- und reisezeitminimaler Fahrpl{\"a}ne ist das momentane Verkehrsmuster. Eine Einteilung der Verkehrsszenarien l{\"a}sst sich am besten bei B{\"u}rogeb{\"a}uden vornehmen. So ist es typisch f{\"u}r die Morgenstunden, dass jeder Passagier auf einer Zugangsebene seine Fahrt beginnt und alle Passagiere die gleiche Fahrtrichtung haben. Unter einer Zugangsebene ist z. B. der Haupteingang oder ein Parkdeck zu verstehen. Ein weiterer wesentlicher Punkt bei Zielrufsystemen ist die Art der Zuweisung der Passagiere durch das System. Zum einen gibt es unmittelbar zuweisende (UZ-) Systeme. In einem UZ-System wird nach jeder Ankunft eines Passagiers eine Momentaufnahme des momentanen Verkehrs erstellt und es findet eine Neuplanung und Zuweisung statt. Eine solche Momentaufnahme werden wir im sp{\"a}teren Verkauf als Schnappschussproblem bezeichnen. Jeder Passagier bekommt im Anschluss an die L{\"o}sung des Schnappschussproblems eine Mitteilung vom System, z. B. {\"u}ber ein Display, welchen Aufzug er benutzen soll. Zum anderen gibt es verz{\"o}gert zuweisende (VZ-) Systeme. In diesen Systemen wird die Erstellung und L{\"o}sung eines Schnappschussproblems bis kurz vor Ankunft eines Aufzuges auf einer Etage verz{\"o}gert. In einem VZ-System teilt das System allen wartenden Passagieren die geplanten Zieletagen des ankommenden Aufzugs mit. Jeder Passagier, der einen Ruf get{\"a}tigt hat und zu einer dieser Zieletagen fahren will, kann jetzt diesen Aufzug betreten. Durch die Verz{\"o}gerung muss im Vergleich zu einem UZ-System eine weitaus gr{\"o}ßere Menge von Passagieren zugewiesen werden. Dadurch kann der L{\"o}sungsprozess bedeutend aufw{\"a}ndiger werden. Vorteil eines VZ-Systems ist hingegen der gr{\"o}ßere Freiheitsgrad bei der Optimierung, da aufgrund der sp{\"a}ten Zuweisung die weitere Verkehrsentwicklung mit einbezogen werden kann. VZ-Systeme sind aufgrund des gr{\"o}ßeren Freiheitsgrades interessant f{\"u}r die Praxis ist, wir uns demzufolge in dieser Arbeit mit einer effizienteren L{\"o}sung dieser Art von Schnappschussproblemen befassen. Es gen{\"u}gt dabei den L{\"o}sungsprozess eines Schnappschussproblems zu betrachten. Das Ziel ist eine Reduzierung der ben{\"o}tigten Rechenzeit. Unter Reoptimierung verstehen wir die Konstruktion zul{\"a}ssiger Spalten in den jeweiligen Iterationsrunden der Spaltengenerierung innerhalb eines Schnappschussproblems. Als eine Iterationsrunde bezeichnet wir einer Menge zul{\"a}ssiger Touren mit negativen reduzierten Kosten. Eine effiziente Reoptimierung zeichnet sich durch die Wiederverwendung und Aufbereitung von Informationen aus vorangegangenen Iterationsrunden desselben Schnappschussproblems aus. Zu den wichtigen Informationen geh{\"o}rt der konstruierte Suchbaum der vorherigen Iterationsrunde mit seinen ausgeloteten (abgeschnittenen) Bl{\"a}ttern sowie konstruierten Touren bzw. Spalten, welche in der Iterationsrunde ihrer Konstruktion nicht zur L{\"o}sung des Teilproblems der Spaltengenerierung beitrugen. Eine solche Wiederverwendung und Aufbereitung von Informationen nennen wir Warmstart.}, language = {de} } @misc{WiebelVosHege, author = {Wiebel, Alexander and Vos, Frans M. and Hege, Hans-Christian}, title = {Perception-Oriented Picking of Structures in Direct Volumetric Renderings}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-14343}, number = {11-45}, abstract = {Radiologists from all application areas are trained to read slice-based visualizations of 3D medical image data. Despite the numerous examples of sophisticated three-dimensional renderings, especially all variants of direct volume rendering, such methods are often considered not very useful by radiologists who prefer slice-based visualization. Just recently there have been attempts to bridge this gap between 2D and 3D renderings. These attempts include specialized techniques for volume picking that result in repositioning slices. In this paper, we present a new volume picking technique that, in contrast to previous work, does not require pre-segmented data or metadata. The positions picked by our method are solely based on the data itself, the transfer function and, most importantly, on the way the volumetric rendering is perceived by viewers. To demonstrate the usefulness of the proposed method we apply it for automatically repositioning slices in an abdominal MRI scan, a data set from a flow simulation and a number of other volumetric scalar fields. Furthermore we discuss how the method can be implemented in combination with various different volumetric rendering techniques.}, language = {en} } @misc{WendeSteinke, author = {Wende, Florian and Steinke, Thomas}, title = {Swendsen-Wang Multi-Cluster Algorithm for the 2D/3D Ising Model on Xeon Phi and GPU}, issn = {1438-0064}, doi = {10.1145/2503210.2503254}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42187}, abstract = {Simulations of the critical Ising model by means of local update algorithms suffer from critical slowing down. One way to partially compensate for the influence of this phenomenon on the runtime of simulations is using increasingly faster and parallel computer hardware. Another approach is using algorithms that do not suffer from critical slowing down, such as cluster algorithms. This paper reports on the Swendsen-Wang multi-cluster algorithm on Intel Xeon Phi coprocessor 5110P, Nvidia Tesla M2090 GPU, and x86 multi-core CPU. We present shared memory versions of the said algorithm for the simulation of the two- and three-dimensional Ising model. We use a combination of local cluster search and global label reduction by means of atomic hardware primitives. Further, we describe an MPI version of the algorithm on Xeon Phi and CPU, respectively. Significant performance improvements over known im plementations of the Swendsen-Wang algorithm are demonstrated.}, language = {en} } @misc{WeberTranfieldHoeoegetal., author = {Weber, Britta and Tranfield, Erin M. and H{\"o}{\"o}g, Johanna L. and Baum, Daniel and Antony, Claude and Hyman, Tony and Verbavatz, Jean-Marc and Prohaska, Steffen}, title = {Automated stitching of microtubule centerlines across serial electron tomograms}, issn = {1438-0064}, doi = {10.1371/journal.pone.0113222}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-52958}, abstract = {Tracing microtubule centerlines in serial section electron tomography requires microtubules to be stitched across sections, that is lines from different sections need to be aligned, endpoints need to be matched at section boundaries to establish a correspondence between neighboring sections, and corresponding lines need to be connected across multiple sections. We present computational methods for these tasks: 1) An initial alignment is computed using a distance compatibility graph. 2) A fine alignment is then computed with a probabilistic variant of the iterative closest points algorithm, which we extended to handle the orientation of lines by introducing a periodic random variable to the probabilistic formulation. 3) Endpoint correspondence is established by formulating a matching problem in terms of a Markov random field and computing the best matching with belief propagation. Belief propagation is not generally guaranteed to converge to a minimum. We show how convergence can be achieved, nonetheless, with minimal manual input. In addition to stitching microtubule centerlines, the correspondence is also applied to transform and merge the electron tomograms. We applied the proposed methods to samples from the mitotic spindle in C. elegans, the meiotic spindle in X. laevis, and sub-pellicular microtubule arrays in T. brucei. The methods were able to stitch microtubules across section boundaries in good agreement with experts' opinions for the spindle samples. Results, however, were not satisfactory for the microtubule arrays. For certain experiments, such as an analysis of the spindle, the proposed methods can replace manual expert tracing and thus enable the analysis of microtubules over long distances with reasonable manual effort.}, language = {en} } @misc{ShinanoRehfeldtKoch, author = {Shinano, Yuji and Rehfeldt, Daniel and Koch, Thorsten}, title = {Building Optimal Steiner Trees on Supercomputers by using up to 43,000 Cores}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-71118}, abstract = {SCIP-JACK is a customized, branch-and-cut based solver for Steiner tree and related problems. ug [SCIP-JACK, MPI] extends SCIP-JACK to a massively par- allel solver by using the Ubiquity Generator (UG) framework. ug [SCIP-JACK, MPI] was the only solver that could run on a distributed environment at the (latest) 11th DIMACS Challenge in 2014. Furthermore, it could solve three well-known open instances and updated 14 best known solutions to instances from the bench- mark libary STEINLIB. After the DIMACS Challenge, SCIP-JACK has been con- siderably improved. However, the improvements were not reflected on ug [SCIP- JACK, MPI]. This paper describes an updated version of ug [SCIP-JACK, MPI], especially branching on constrains and a customized racing ramp-up. Furthermore, the different stages of the solution process on a supercomputer are described in detail. We also show the latest results on open instances from the STEINLIB.}, language = {en} } @misc{ShinanoHeinzVigerskeetal., author = {Shinano, Yuji and Heinz, Stefan and Vigerske, Stefan and Winkler, Michael}, title = {FiberSCIP - A shared memory parallelization of SCIP}, issn = {1438-0064}, doi = {10.1287/ijoc.2017.0762}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42595}, abstract = {Recently, parallel computing environments have become significantly popular. In order to obtain the benefit of using parallel computing environments, we have to deploy our programs for these effectively. This paper focuses on a parallelization of SCIP (Solving Constraint Integer Programs), which is a MIP solver and constraint integer programming framework available in source code. There is a parallel extension of SCIP named ParaSCIP, which parallelizes SCIP on massively parallel distributed memory computing environments. This paper describes FiberSCIP, which is yet another parallel extension of SCIP to utilize multi-threaded parallel computation on shared memory computing environments, and has the following contributions: First, the basic concept of having two parallel extensions and the relationship between them and the parallelization framework provided by UG (Ubiquity Generator) is presented, including an implementation of deterministic parallelization. Second, the difficulties to achieve a good performance that utilizes all resources on an actual computing environment and the difficulties of performance evaluation of the parallel solvers are discussed. Third, a way to evaluate the performance of new algorithms and parameter settings of the parallel extensions is presented. Finally, current performance of FiberSCIP for solving mixed-integer linear programs (MIPs) and mixed-integer non-linear programs (MINLPs) in parallel is demonstrated.}, language = {en} } @misc{ShinanoAchterbergBertholdetal., author = {Shinano, Yuji and Achterberg, Tobias and Berthold, Timo and Heinz, Stefan and Koch, Thorsten and Winkler, Michael}, title = {Solving Open MIP Instances with ParaSCIP on Supercomputers using up to 80,000 Cores}, issn = {1438-0064}, doi = {10.1109/IPDPS.2016.56}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-56404}, abstract = {This paper describes how we solved 12 previously unsolved mixed-integer program- ming (MIP) instances from the MIPLIB benchmark sets. To achieve these results we used an enhanced version of ParaSCIP, setting a new record for the largest scale MIP computation: up to 80,000 cores in parallel on the Titan supercomputer. In this paper we describe the basic parallelization mechanism of ParaSCIP, improvements of the dynamic load balancing and novel techniques to exploit the power of parallelization for MIP solving. We give a detailed overview of computing times and statistics for solving open MIPLIB instances.}, language = {en} } @misc{Shinano, author = {Shinano, Yuji}, title = {UG - Ubiquity Generator Framework v0.9.1}, doi = {10.12752/8508}, abstract = {UG is a generic framework to parallelize branch-and-bound based solvers (e.g., MIP, MINLP, ExactIP) in a distributed or shared memory computing environment. It exploits the powerful performance of state-of-the-art "base solvers", such as SCIP, CPLEX, etc. without the need for base solver parallelization. UG framework, ParaSCIP(ug[SCIP,MPI]) and FiberSCIP (ug[SCIP,Pthreads]) are available as a beta version. For MIP solving, ParaSCIP and FiberSCIP are well debugged and should be stable. For MINLP solving, they are relatively stable, but not as thoroughly debugged. This release version should handle branch-and-cut approaches where subproblems are defined by variable bounds and also by constrains for ug[SCIP,*] ParaSCIP and FiberSCIP). Therefore, problem classes other than MIP or MINLP can be handled, but they have not been tested yet. v0.9.1: Update orbitope cip files.}, language = {en} } @misc{Shinano, author = {Shinano, Yuji}, title = {The Ubiquity Generator Framework: 7 Years of Progress in Parallelizing Branch-and-Bound}, issn = {1438-0064}, doi = {10.1007/978-3-319-89920-6_20}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-65545}, abstract = {Mixed integer linear programming (MIP) is a general form to model combinatorial optimization problems and has many industrial applications. The performance of MIP solvers has improved tremendously in the last two decades and these solvers have been used to solve many real-word problems. However, against the backdrop of modern computer technology, parallelization is of pivotal importance. In this way, ParaSCIP is the most successful parallel MIP solver in terms of solving previously unsolvable instances from the well-known benchmark instance set MIPLIB by using supercomputers. It solved two instances from MIPLIB2003 and 12 from MIPLIB2010 for the first time to optimality by using up to 80,000 cores on supercomputers. ParaSCIP has been developed by using the Ubiquity Generator (UG) framework, which is a general software package to parallelize any state-of-the-art branch-and-bound based solver. This paper discusses 7 years of progress in parallelizing branch-and-bound solvers with UG.}, language = {en} } @misc{Shinano, author = {Shinano, Yuji}, title = {UG - Ubiquity Generator Framework v1.0.0beta}, doi = {10.12752/8521}, abstract = {UG is a generic framework to parallelize branch-and-bound based solvers (e.g., MIP, MINLP, ExactIP) in a distributed or shared memory computing environment. It exploits the powerful performance of state-of-the-art "base solvers", such as SCIP, CPLEX, etc. without the need for base solver parallelization. UG framework, ParaSCIP(ug[SCIP,MPI]) and FiberSCIP (ug[SCIP,Pthreads]) are available as a beta version. v1.0.0: new documentation and cmake, generalization of ug framework, implementation of selfsplitrampup for fiber- and parascip, better memory and time limit handling.}, language = {en} } @misc{Schaefer, author = {Sch{\"a}fer, Patrick}, title = {Bag-Of-SFA-Symbols in Vector Space (BOSS VS)}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-54984}, abstract = {Time series classification mimics the human understanding of similarity. When it comes to larger datasets, state of the art classifiers reach their limits in terms of unreasonable training or testing times. One representative example is the 1-nearest-neighbor DTW classifier (1-NN DTW) that is commonly used as the benchmark to compare to and has several shortcomings: it has a quadratic time and it degenerates in the presence of noise. To reduce the computational complexity lower bounding techniques or recently a nearest centroid classifier have been introduced. Still, execution times to classify moderately sized datasets on a single core are in the order of hours. We present our Bag-Of-SFA-Symbols in Vector Space (BOSS VS) classifier that is robust and accurate due to invariance to noise, phase shifts, offsets, amplitudes and occlusions. We show that it is as accurate while being multiple orders of magnitude faster than state of the art classifiers. Using the BOSS VS allows for mining massive time series datasets and real-time analytics.}, language = {en} } @misc{RiberaBorrellQuerRichteretal., author = {Ribera Borrell, Enric and Quer, Jannes and Richter, Lorenz and Sch{\"u}tte, Christof}, title = {Improving control based importance sampling strategies for metastable diffusions via adapted metadynamics}, issn = {1438-0064}, abstract = {Sampling rare events in metastable dynamical systems is often a computationally expensive task and one needs to resort to enhanced sampling methods such as importance sampling. Since we can formulate the problem of finding optimal importance sampling controls as a stochastic optimization problem, this then brings additional numerical challenges and the convergence of corresponding algorithms might as well suffer from metastabilty. In this article we address this issue by combining systematic control approaches with the heuristic adaptive metadynamics method. Crucially, we approximate the importance sampling control by a neural network, which makes the algorithm in principle feasible for high dimensional applications. We can numerically demonstrate in relevant metastable problems that our algorithm is more effective than previous attempts and that only the combination of the two approaches leads to a satisfying convergence and therefore to an efficient sampling in certain metastable settings.}, language = {en} } @misc{QuerDonatiKelleretal., author = {Quer, Jannes and Donati, Luca and Keller, Bettina and Weber, Marcus}, title = {An automatic adaptive importance sampling algorithm for molecular dynamics in reaction coordinates}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-62075}, abstract = {In this article we propose an adaptive importance sampling scheme for dynamical quantities of high dimensional complex systems which are metastable. The main idea of this article is to combine a method coming from Molecular Dynamics Simulation, Metadynamics, with a theorem from stochastic analysis, Girsanov's theorem. The proposed algorithm has two advantages compared to a standard estimator of dynamic quantities: firstly, it is possible to produce estimators with a lower variance and, secondly, we can speed up the sampling. One of the main problems for building importance sampling schemes for metastable systems is to find the metastable region in order to manipulate the potential accordingly. Our method circumvents this problem by using an assimilated version of the Metadynamics algorithm and thus creates a non-equilibrium dynamics which is used to sample the equilibrium quantities.}, language = {en} } @misc{PfeufferWerner, author = {Pfeuffer, Frank and Werner, Axel}, title = {Adaptive telecommunication network operation with a limited number of reconfigurations}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-55547}, abstract = {Rising traffic in telecommunication networks lead to rising energy costs for the network operators. Meanwhile, increased flexibility of the networking hardware may help to realize load-adaptive operation of the networks to cut operation costs. To meet network operators' concerns over stability, we propose to switch network configurations only a limited number of times per day. We present a method for the integrated computation of optimal switching times and network configurations that alternatingly solves mixed-integer programs and constrained shortest cycle problems in a certain graph. Similarly to the Branch \& Bound Algorithm, it uses lower and upper bounds on the optimum value and allows for pivoting strategies to guide the computation and avoid the solution of irrelevant subproblems. The algorithm can act as a framework to be adapted and applied to suitable problems of different origin.}, language = {en} } @misc{Paskin, type = {Master Thesis}, author = {Paskin, Martha}, title = {Estimating 3D Shape of the Head Skeleton of Basking Sharks Using Annotated Landmarks on a 2D Image}, abstract = {Basking sharks are thought to be one of the most efficient filter-feeding fish in terms of the throughput of water filtered through their gills. Details about the underlying morphology of their branchial region have not been studied due to various challenges in acquiring real-world data. The present thesis aims to facilitate this, by developing a mathematical shape model which constructs the 3D structure of the head skeleton of a basking shark using annotated landmarks on a single 2D image. This is an ill-posed problem as estimating the depth of a 3D object from a single 2D view is, in general, not possible. To reduce this ambiguity, we create a set of pre-defined training shapes in 3D from CT scans of basking sharks. First, the damaged structures of the sharks in the scans are corrected via solving a set of optimization problems, before using them as accurate 3D representations of the object. Then, two approaches are employed for the 2D-to-3D shape fitting problem-an Active Shape Model approach and a Kendall's Shape Space approach. The former represents a shape as a point on a high-dimensional Euclidean space, whereas the latter represents a shape as an equivalence class of points in this Euclidean space. Kendall's shape space approach is a novel technique that has not yet been applied in this context, and a comprehensive comparison of the two approaches suggests this approach to be superior for the problem at hand. This can be credited to an improved interpolation of the training shapes.}, language = {en} } @misc{OrlowskiWernerWessaely, author = {Orlowski, Sebastian and Werner, Axel and Wess{\"a}ly, Roland}, title = {Estimating trenching costs in FTTx network planning}, issn = {1438-0064}, doi = {10.1007/978-3-642-29210-1_15}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-14884}, abstract = {In this paper we assess to which extent trenching costs of an FTTx network are unavoidable, even if technical side constraints are neglected. For that purpose we present an extended Steiner tree model. Using a variety of realistic problem instances we demonstrate that the total trenching cost can only be reduced by about 5 percent in realistic scenarios. This work has been funded by BMBF (German Federal Ministry of Education and Research) within the program "KMU-innovativ".}, language = {en} }