@misc{BuesingD'AndreagiovanniRaymond, author = {B{\"u}sing, Christina and D'Andreagiovanni, Fabio and Raymond, Annie}, title = {0-1 Multiband Robust Optimization}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-44093}, abstract = {We provide an overview of new theoretical results that we obtained while further investigating multiband robust optimization, a new model for robust optimization that we recently proposed to tackle uncertainty in mixed-integer linear programming. This new model extends and refines the classical Gamma-robustness model of Bertsimas and Sim and is particularly useful in the common case of arbitrary asymmetric distributions of the uncertainty. Here, we focus on uncertain 0-1 programs and we analyze their robust counterparts when the uncertainty is represented through a multiband set. Our investigations were inspired by the needs of our industrial partners in the research project ROBUKOM.}, language = {en} } @misc{Shestakov, type = {Master Thesis}, author = {Shestakov, Alexey}, title = {A Deep Learning Method for Automated Detection of Meniscal Tears in Meniscal Sub-Regions in 3D MRI Data}, pages = {96}, abstract = {This work presents a fully automated pipeline, centered around a deep neural network, as well as a method to train that network in an efficient manner, that enables accurate detection of lesions in meniscal anatomical subregions. The network architecture is based on a transformer encoder/decoder. It is trained on DESS and tuned on IW TSE 3D MRI scans sourced from the Osteoarthritis Initiative. Furthermore, it is trained in a multilabel, and multitask fashion, using an auxiliary detection head. The former enables implicit localisation of meniscal defects, that to the best of my knowledge, has not yet been reported elsewhere. The latter enables efficient learning on the entire 3D MRI volume. Thus, the proposed method does not require any expert knowledge at inference. Aggregated inference results from two datasets resulted in an overall AUCROC result of 0.90, 0.91 and 0.93 for meniscal lesion detection anywhere in the knee, in medial and in lateral menisci respectively. These results compare very well to the related work, even though only a fraction of the data has been utilized. Clinical applicability and benefit is yet to be determined.}, language = {en} } @misc{D'AndreagiovanniKrolikowskiPulaj, author = {D'Andreagiovanni, Fabio and Krolikowski, Jonatan and Pulaj, Jonad}, title = {A hybrid primal heuristic for Robust Multiperiod Network Design}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-44081}, abstract = {We investigate the Robust Multiperiod Network Design Problem, a generalization of the classical Capacitated Network Design Problem that additionally considers multiple design periods and provides solutions protected against traffic uncertainty. Given the intrinsic difficulty of the problem, which proves challenging even for state-of-the art commercial solvers, we propose a hybrid primal heuristic based on the combination of ant colony optimization and an exact large neighborhood search. Computational experiments on a set of realistic instances from the SNDlib show that our heuristic can find solutions of extremely good quality with low optimality gap.}, language = {en} } @misc{PaskinBaumDeanetal., author = {Paskin, Martha and Baum, Daniel and Dean, Mason N. and von Tycowicz, Christoph}, title = {A Kendall Shape Space Approach to 3D Shape Estimation from 2D Landmarks -- Source Code and Data}, doi = {10.12752/8730}, abstract = {Source code and novel dataset of basking shark head skeletons facilitating the reproduction of the results presented in 'A Kendall Shape Space Approach to 3D Shape Estimation from 2D Landmarks' - ECCV 2022.}, language = {en} } @misc{BuesingD'Andreagiovanni, author = {B{\"u}sing, Christina and D'Andreagiovanni, Fabio}, title = {A new theoretical framework for Robust Optimization under multi-band uncertainty}, issn = {1438-0064}, doi = {10.1007/978-3-319-00795-3_17}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42644}, abstract = {We provide an overview of our main results about studying Linear Programming Problems whose coefficient matrix is subject to uncertainty and the uncertainty is modeled through a multi-band set. Such an uncertainty set generalizes the classical one proposed by Bertsimas and Sim and is particularly suitable in the common case of arbitrary non-symmetric distributions of the parameters. Our investigations were inspired by practical needs of our industrial partner in ongoing projects with focus on the design of robust telecommunications networks.}, language = {en} } @misc{HosodaMaherShinanoetal., author = {Hosoda, Junko and Maher, Stephen J. and Shinano, Yuji and Villumsen, Jonas Christoffer}, title = {A parallel branch-and-bound heuristic for the integrated long-haul and local vehicle routing problem on an adaptive transportation network}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-89700}, abstract = {Consolidation of commodities and coordination of vehicle routes are fundamental features of supply chain management problems. While locations for consolidation and coordination are typically known a priori, in adaptive transportation networks this is not the case. The identification of such consolidation locations forms part of the decision making process. Supply chain management problems integrating the designation of consolidation locations with the coordination of long haul and local vehicle routing is not only challenging to solve, but also very difficult to formulate mathematically. In this paper, the first mathematical model integrating location clustering with long haul and local vehicle routing is proposed. This mathematical formulation is used to develop algorithms to find high quality solutions. A novel parallel framework is developed that combines exact and heuristic methods to improve the search for high quality solutions and provide valid bounds. The results demonstrate that using exact methods to guide heuristic search is an effective approach to find high quality solutions for difficult supply chain management problems.}, language = {en} } @misc{Wolf, author = {Wolf, Thomas}, title = {A Study of Genetic Algorithms solving a combinatorial Puzzle}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-3445}, number = {SC-98-01}, abstract = {The suitability of Genetic Algorithms (GAs) to solve a combinatorial problem with only one solution is investigated. The dependence of the performance is studied for GA-hard and GA-soft fitness functions, both with a range of different parameter values and different encodings.}, language = {en} } @misc{PfeufferWerner, author = {Pfeuffer, Frank and Werner, Axel}, title = {Adaptive telecommunication network operation with a limited number of reconfigurations}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-55547}, abstract = {Rising traffic in telecommunication networks lead to rising energy costs for the network operators. Meanwhile, increased flexibility of the networking hardware may help to realize load-adaptive operation of the networks to cut operation costs. To meet network operators' concerns over stability, we propose to switch network configurations only a limited number of times per day. We present a method for the integrated computation of optimal switching times and network configurations that alternatingly solves mixed-integer programs and constrained shortest cycle problems in a certain graph. Similarly to the Branch \& Bound Algorithm, it uses lower and upper bounds on the optimum value and allows for pivoting strategies to guide the computation and avoid the solution of irrelevant subproblems. The algorithm can act as a framework to be adapted and applied to suitable problems of different origin.}, language = {en} } @misc{QuerDonatiKelleretal., author = {Quer, Jannes and Donati, Luca and Keller, Bettina and Weber, Marcus}, title = {An automatic adaptive importance sampling algorithm for molecular dynamics in reaction coordinates}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-62075}, abstract = {In this article we propose an adaptive importance sampling scheme for dynamical quantities of high dimensional complex systems which are metastable. The main idea of this article is to combine a method coming from Molecular Dynamics Simulation, Metadynamics, with a theorem from stochastic analysis, Girsanov's theorem. The proposed algorithm has two advantages compared to a standard estimator of dynamic quantities: firstly, it is possible to produce estimators with a lower variance and, secondly, we can speed up the sampling. One of the main problems for building importance sampling schemes for metastable systems is to find the metastable region in order to manipulate the potential accordingly. Our method circumvents this problem by using an assimilated version of the Metadynamics algorithm and thus creates a non-equilibrium dynamics which is used to sample the equilibrium quantities.}, language = {en} } @misc{FujiiKimKojimaetal., author = {Fujii, Koichi and Kim, Sunyoung and Kojima, Masakazu and Mittelmann, Hans D. and Shinano, Yuji}, title = {An Exceptionally Difficult Binary Quadratic Optimization Problem with Symmetry: a Challenge for The Largest Unsolved QAP Instance Tai256c}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-93072}, abstract = {Tai256c is the largest unsolved quadratic assignment problem (QAP) instance in QAPLIB. It is known that QAP tai256c can be converted into a 256 dimensional binary quadratic optimization problem (BQOP) with a single cardinality constraint which requires the sum of the binary variables to be 92. As the BQOP is much simpler than the original QAP, the conversion increases the possibility to solve the QAP. Solving exactly the BQOP, however, is still very difficult. Indeed, a 1.48\% gap remains between the best known upper bound (UB) and lower bound (LB) of the unknown optimal value. This paper shows that the BQOP admits a nontrivial symmetry, a property that makes the BQOP very hard to solve. The symmetry induces equivalent subproblems in branch and bound (BB) methods. To effectively improve the LB, we propose an efficient BB method that incorporates a doubly nonnegative relaxation, the standard orbit branching and a technique to prune equivalent subproblems. With this BB method, a new LB with 1.25\% gap is successfully obtained, and computing an LB with 1.0\% gap is shown to be still quite difficult.}, language = {en} } @misc{Hoffmann, type = {Master Thesis}, author = {Hoffmann, Marie}, title = {Approximate Algorithms for Distributed Systems}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42370}, school = {Zuse Institute Berlin (ZIB)}, pages = {75}, abstract = {Peer-to-peer (P2P) systems form a special class of distributed systems. Typically, nodes in a P2P system are flat and share the same responsabilities. In this thesis we focus on three problems that occur in P2P systems: the storage of data replicates, quantile computation on distributed data streams, and churn rate estimation. Data replication is one of the oldest techniques to maintain stored data in a P2P system and to reply to read requests. Applications, which use data replication are distributed databases. They are part of an abstract overlay network and do not see the underlying network topology. The question is how to place a set of data replicates in a distributed system such that response times and failure probabilities become minimal without a priori knowledge of the topology of the underlying hardware nodes? We show how to utilize an agglomerative clustering procedure to reach this goal. State-of-the-art algorithms for aggregation of distributed data or data streams require at some point synchronization, or merge data aggregates hierarchically, which does not accompany the basic principle of P2P systems. We test whether randomized communication and merging of data aggregates are able to produce the same results. These data aggregates serve for quantile queries. Constituting and maintaining a P2P overlay network requires frequent message passing. It is a goal to minimize the number of maintenance messages since they consume bandwidth which might be missing for other applications. The lower bound of the frequency for mainte- nance messages is highly dependent on the churn rate of peers. We show how to estimate the mean lifetime of peers and to reduce the frequency for maintenance messages without destabilizing the infrastructure of the constituting overlay.}, language = {en} } @misc{WeberTranfieldHoeoegetal., author = {Weber, Britta and Tranfield, Erin M. and H{\"o}{\"o}g, Johanna L. and Baum, Daniel and Antony, Claude and Hyman, Tony and Verbavatz, Jean-Marc and Prohaska, Steffen}, title = {Automated stitching of microtubule centerlines across serial electron tomograms}, issn = {1438-0064}, doi = {10.1371/journal.pone.0113222}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-52958}, abstract = {Tracing microtubule centerlines in serial section electron tomography requires microtubules to be stitched across sections, that is lines from different sections need to be aligned, endpoints need to be matched at section boundaries to establish a correspondence between neighboring sections, and corresponding lines need to be connected across multiple sections. We present computational methods for these tasks: 1) An initial alignment is computed using a distance compatibility graph. 2) A fine alignment is then computed with a probabilistic variant of the iterative closest points algorithm, which we extended to handle the orientation of lines by introducing a periodic random variable to the probabilistic formulation. 3) Endpoint correspondence is established by formulating a matching problem in terms of a Markov random field and computing the best matching with belief propagation. Belief propagation is not generally guaranteed to converge to a minimum. We show how convergence can be achieved, nonetheless, with minimal manual input. In addition to stitching microtubule centerlines, the correspondence is also applied to transform and merge the electron tomograms. We applied the proposed methods to samples from the mitotic spindle in C. elegans, the meiotic spindle in X. laevis, and sub-pellicular microtubule arrays in T. brucei. The methods were able to stitch microtubules across section boundaries in good agreement with experts' opinions for the spindle samples. Results, however, were not satisfactory for the microtubule arrays. For certain experiments, such as an analysis of the spindle, the proposed methods can replace manual expert tracing and thus enable the analysis of microtubules over long distances with reasonable manual effort.}, language = {en} } @misc{Schaefer, author = {Sch{\"a}fer, Patrick}, title = {Bag-Of-SFA-Symbols in Vector Space (BOSS VS)}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-54984}, abstract = {Time series classification mimics the human understanding of similarity. When it comes to larger datasets, state of the art classifiers reach their limits in terms of unreasonable training or testing times. One representative example is the 1-nearest-neighbor DTW classifier (1-NN DTW) that is commonly used as the benchmark to compare to and has several shortcomings: it has a quadratic time and it degenerates in the presence of noise. To reduce the computational complexity lower bounding techniques or recently a nearest centroid classifier have been introduced. Still, execution times to classify moderately sized datasets on a single core are in the order of hours. We present our Bag-Of-SFA-Symbols in Vector Space (BOSS VS) classifier that is robust and accurate due to invariance to noise, phase shifts, offsets, amplitudes and occlusions. We show that it is as accurate while being multiple orders of magnitude faster than state of the art classifiers. Using the BOSS VS allows for mining massive time series datasets and real-time analytics.}, language = {en} } @misc{ZakrzewskaD'AndreagiovanniRueppetal., author = {Zakrzewska, Anna and D'Andreagiovanni, Fabio and Ruepp, Sarah and Berger, Michael S.}, title = {Biobjective Optimization of Radio Access Technology Selection and Resource Allocation in Heterogeneous Wireless Networks}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42675}, abstract = {We propose a novel optimization model for resource assignment in heterogeneous wireless network. The model adopts two objective functions maximizing the number of served users and the minimum granted utility at once. A distinctive feature of our new model is to consider two consecutive time slots, in order to include handover as an additional decision dimension. Furthermore, the solution algorithm that we propose refines a heuristic solution approach recently proposed in literature, by considering a real joint optimization of the considered resources. The simulation study shows that the new model leads to a significant reduction in handover frequency, when compared to a traditional scheme based on maximum SNR.}, language = {en} } @misc{ShinanoRehfeldtKoch, author = {Shinano, Yuji and Rehfeldt, Daniel and Koch, Thorsten}, title = {Building Optimal Steiner Trees on Supercomputers by using up to 43,000 Cores}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-71118}, abstract = {SCIP-JACK is a customized, branch-and-cut based solver for Steiner tree and related problems. ug [SCIP-JACK, MPI] extends SCIP-JACK to a massively par- allel solver by using the Ubiquity Generator (UG) framework. ug [SCIP-JACK, MPI] was the only solver that could run on a distributed environment at the (latest) 11th DIMACS Challenge in 2014. Furthermore, it could solve three well-known open instances and updated 14 best known solutions to instances from the bench- mark libary STEINLIB. After the DIMACS Challenge, SCIP-JACK has been con- siderably improved. However, the improvements were not reflected on ug [SCIP- JACK, MPI]. This paper describes an updated version of ug [SCIP-JACK, MPI], especially branching on constrains and a customized racing ramp-up. Furthermore, the different stages of the solution process on a supercomputer are described in detail. We also show the latest results on open instances from the STEINLIB.}, language = {en} } @misc{ItoShinano, author = {Ito, Satoshi and Shinano, Yuji}, title = {Calculation of clinch and elimination numbers for sports leagues with multiple tiebreaking criteria}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-70591}, abstract = {The clinch (elimination) number is a minimal number of future wins (losses) needed to clinch (to be eliminated from) a specified place in a sports league. Several optimization models and computational results are shown in this paper for calculating clinch and elimination numbers in the presence of predefined multiple tiebreaking criteria. The main subject of this paper is to provide a general algorithmic framework based on integer programming with utilizing possibly multilayered upper and lower bounds.}, language = {en} } @misc{TateiwaShinanoYamamuraetal., author = {Tateiwa, Nariaki and Shinano, Yuji and Yamamura, Keiichiro and Yoshida, Akihiro and Kaji, Shizuo and Yasuda, Masaya and Fujisawa, Katsuki}, title = {CMAP-LAP: Configurable Massively Parallel Solver for Lattice Problems}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-82802}, abstract = {Lattice problems are a class of optimization problems that are notably hard. There are no classical or quantum algorithms known to solve these problems efficiently. Their hardness has made lattices a major cryptographic primitive for post-quantum cryptography. Several different approaches have been used for lattice problems with different computational profiles; some suffer from super-exponential time, and others require exponential space. This motivated us to develop a novel lattice problem solver, CMAP-LAP, based on the clever coordination of different algorithms that run massively in parallel. With our flexible framework, heterogeneous modules run asynchronously in parallel on a large-scale distributed system while exchanging information, which drastically boosts the overall performance. We also implement full checkpoint-and-restart functionality, which is vital to high-dimensional lattice problems. Through numerical experiments with up to 103,680 cores, we evaluated the performance and stability of our system and demonstrated its high capability for future massive-scale experiments.}, language = {en} } @misc{NielsenWeber, author = {Nielsen, Adam and Weber, Marcus}, title = {Computing the nearest reversible Markov chain}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-53292}, abstract = {Reversible Markov chains are the basis of many applications. However, computing transition probabilities by a finite sampling of a Markov chain can lead to truncation errors. Even if the original Markov chain is reversible, the approximated Markov chain might be non-reversible and will lose important properties, like the real valued spectrum. In this paper, we show how to find the closest reversible Markov chain to a given transition matrix. It turns out that this matrix can be computed by solving a convex minimization problem.}, language = {en} } @article{NielsenWeber, author = {Nielsen, Adam and Weber, Marcus}, title = {Computing the nearest reversible Markov chain}, series = {Numerical Linear Algebra with Applications}, volume = {22}, journal = {Numerical Linear Algebra with Applications}, number = {3}, doi = {10.1002/nla.1967}, pages = {483 -- 499}, abstract = {Reversible Markov chains are the basis of many applications. However, computing transition probabilities by a finite sampling of a Markov chain can lead to truncation errors. Even if the original Markov chain is reversible, the approximated Markov chain might be non-reversible and will lose important properties, like the real valued spectrum. In this paper, we show how to find the closest reversible Markov chain to a given transition matrix. It turns out that this matrix can be computed by solving a convex minimization problem.}, language = {en} } @misc{ChraparyDalitzNeunetal., author = {Chrapary, Hagen and Dalitz, Wolfgang and Neun, Winfried and Sperber, Wolfram}, title = {Design, concepts, and state of the art of the swMATH service}, issn = {1438-0064}, doi = {10.1007/s11786-017-0305-5}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-62263}, abstract = {In this paper, the concepts and design for an efficient information service for mathematical software and further mathematical research data are presented. The publication-based approach and the Web-based approach are the main building blocks of the service and will be discussed. Heuristic methods are used for identification, extraction, and ranking of information about software and other mathematical research data. The methods provide not only information about the research data but also link software and mathematical research data to the scientific context.}, language = {en} } @misc{BeckerHiller, author = {Becker, Kai-Helge and Hiller, Benjamin}, title = {Efficient Enumeration of Acyclic Graph Orientations with Sources or Sinks Revisited}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-77684}, abstract = {In a recent paper, Conte et al. [CGMR2017] presented an algorithm for enumerating all acyclic orientations of a graph G=(V,E) with a single source (and related orientations) with delay O(|V||E|). In this paper we revisit the problem by going back to an early paper by de Fraysseix et al. [FMR1995], who proposed an algorithm for enumerating all bipolar orientations of a graph based on a recursion formula. We first formalize de Fraysseix et al.'s algorithm for bipolar orientations and determine that its delay is also O(|V||E|). We then apply their recursion formula to the case of Conte et al.'s enumeration problem and show that this yields a more efficient enumeration algorithm with delay O(\sqrt(|V|)|E|). Finally, a way to further streamline the algorithm that leads to a particularly simple implementation is suggested.}, language = {en} } @masterthesis{Witzig, type = {Bachelor Thesis}, author = {Witzig, Jakob}, title = {Effiziente Reoptimierung in Branch\&Bound-Verfahren f{\"u}r die Steuerung von Aufz{\"u}gen}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42210}, school = {Zuse Institute Berlin (ZIB)}, pages = {111}, abstract = {Heutzutage ist eine Vielzahl der mehrst{\"o}ckigen Geb{\"a}ude mit Personenaufzugsgruppen ausgestattet. Uns wohl bekannt sind die sogenannten konventionellen Systeme. Bei diesen Systemen bet{\"a}tigt jeder ankommende Passagier eine der beiden Richtungstasten und teilt dem dahinterstehenden Steuerungsalgorithmus seine gew{\"u}nschte Startetage und Fahrtrichtung mit. Betreten wird der zuerst auf der Startetage ankommende Aufzug mit gleicher Fahrtrichtung und ausreichend Kapazit{\"a}t. Die entsprechende Zieletage wird dem System erst nach dem Betreten der Fahrgastkabine mitgeteilt. Neben diesen konventionellen Systemen gibt es Aufzugsgruppen mit Zielrufsteuerung. Die Besonderheit eines zielrufgesteuerten Systems ist, dass ein ankommender Passagier bereits auf der Startetage seine gew{\"u}nschte Zieletage angibt und eine R{\"u}ckmeldung vom System erh{\"a}lt, welchen Aufzug er nutzen soll. Diese Zuweisung durch das System hat das Ziel, die Warte- und Reisezeiten der Passagiere zu minimieren. Ein wesentlicher Faktor bei der Berechnung warte- und reisezeitminimaler Fahrpl{\"a}ne ist das momentane Verkehrsmuster. Eine Einteilung der Verkehrsszenarien l{\"a}sst sich am besten bei B{\"u}rogeb{\"a}uden vornehmen. So ist es typisch f{\"u}r die Morgenstunden, dass jeder Passagier auf einer Zugangsebene seine Fahrt beginnt und alle Passagiere die gleiche Fahrtrichtung haben. Unter einer Zugangsebene ist z. B. der Haupteingang oder ein Parkdeck zu verstehen. Ein weiterer wesentlicher Punkt bei Zielrufsystemen ist die Art der Zuweisung der Passagiere durch das System. Zum einen gibt es unmittelbar zuweisende (UZ-) Systeme. In einem UZ-System wird nach jeder Ankunft eines Passagiers eine Momentaufnahme des momentanen Verkehrs erstellt und es findet eine Neuplanung und Zuweisung statt. Eine solche Momentaufnahme werden wir im sp{\"a}teren Verkauf als Schnappschussproblem bezeichnen. Jeder Passagier bekommt im Anschluss an die L{\"o}sung des Schnappschussproblems eine Mitteilung vom System, z. B. {\"u}ber ein Display, welchen Aufzug er benutzen soll. Zum anderen gibt es verz{\"o}gert zuweisende (VZ-) Systeme. In diesen Systemen wird die Erstellung und L{\"o}sung eines Schnappschussproblems bis kurz vor Ankunft eines Aufzuges auf einer Etage verz{\"o}gert. In einem VZ-System teilt das System allen wartenden Passagieren die geplanten Zieletagen des ankommenden Aufzugs mit. Jeder Passagier, der einen Ruf get{\"a}tigt hat und zu einer dieser Zieletagen fahren will, kann jetzt diesen Aufzug betreten. Durch die Verz{\"o}gerung muss im Vergleich zu einem UZ-System eine weitaus gr{\"o}ßere Menge von Passagieren zugewiesen werden. Dadurch kann der L{\"o}sungsprozess bedeutend aufw{\"a}ndiger werden. Vorteil eines VZ-Systems ist hingegen der gr{\"o}ßere Freiheitsgrad bei der Optimierung, da aufgrund der sp{\"a}ten Zuweisung die weitere Verkehrsentwicklung mit einbezogen werden kann. VZ-Systeme sind aufgrund des gr{\"o}ßeren Freiheitsgrades interessant f{\"u}r die Praxis ist, wir uns demzufolge in dieser Arbeit mit einer effizienteren L{\"o}sung dieser Art von Schnappschussproblemen befassen. Es gen{\"u}gt dabei den L{\"o}sungsprozess eines Schnappschussproblems zu betrachten. Das Ziel ist eine Reduzierung der ben{\"o}tigten Rechenzeit. Unter Reoptimierung verstehen wir die Konstruktion zul{\"a}ssiger Spalten in den jeweiligen Iterationsrunden der Spaltengenerierung innerhalb eines Schnappschussproblems. Als eine Iterationsrunde bezeichnet wir einer Menge zul{\"a}ssiger Touren mit negativen reduzierten Kosten. Eine effiziente Reoptimierung zeichnet sich durch die Wiederverwendung und Aufbereitung von Informationen aus vorangegangenen Iterationsrunden desselben Schnappschussproblems aus. Zu den wichtigen Informationen geh{\"o}rt der konstruierte Suchbaum der vorherigen Iterationsrunde mit seinen ausgeloteten (abgeschnittenen) Bl{\"a}ttern sowie konstruierten Touren bzw. Spalten, welche in der Iterationsrunde ihrer Konstruktion nicht zur L{\"o}sung des Teilproblems der Spaltengenerierung beitrugen. Eine solche Wiederverwendung und Aufbereitung von Informationen nennen wir Warmstart.}, language = {de} } @misc{Paskin, type = {Master Thesis}, author = {Paskin, Martha}, title = {Estimating 3D Shape of the Head Skeleton of Basking Sharks Using Annotated Landmarks on a 2D Image}, abstract = {Basking sharks are thought to be one of the most efficient filter-feeding fish in terms of the throughput of water filtered through their gills. Details about the underlying morphology of their branchial region have not been studied due to various challenges in acquiring real-world data. The present thesis aims to facilitate this, by developing a mathematical shape model which constructs the 3D structure of the head skeleton of a basking shark using annotated landmarks on a single 2D image. This is an ill-posed problem as estimating the depth of a 3D object from a single 2D view is, in general, not possible. To reduce this ambiguity, we create a set of pre-defined training shapes in 3D from CT scans of basking sharks. First, the damaged structures of the sharks in the scans are corrected via solving a set of optimization problems, before using them as accurate 3D representations of the object. Then, two approaches are employed for the 2D-to-3D shape fitting problem-an Active Shape Model approach and a Kendall's Shape Space approach. The former represents a shape as a point on a high-dimensional Euclidean space, whereas the latter represents a shape as an equivalence class of points in this Euclidean space. Kendall's shape space approach is a novel technique that has not yet been applied in this context, and a comprehensive comparison of the two approaches suggests this approach to be superior for the problem at hand. This can be credited to an improved interpolation of the training shapes.}, language = {en} } @misc{OrlowskiWernerWessaely, author = {Orlowski, Sebastian and Werner, Axel and Wess{\"a}ly, Roland}, title = {Estimating trenching costs in FTTx network planning}, issn = {1438-0064}, doi = {10.1007/978-3-642-29210-1_15}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-14884}, abstract = {In this paper we assess to which extent trenching costs of an FTTx network are unavoidable, even if technical side constraints are neglected. For that purpose we present an extended Steiner tree model. Using a variety of realistic problem instances we demonstrate that the total trenching cost can only be reduced by about 5 percent in realistic scenarios. This work has been funded by BMBF (German Federal Ministry of Education and Research) within the program "KMU-innovativ".}, language = {en} } @misc{EhlkeRammLameckeretal., author = {Ehlke, Moritz and Ramm, Heiko and Lamecker, Hans and Hege, Hans-Christian and Zachow, Stefan}, title = {Fast Generation of Virtual X-ray Images from Deformable Tetrahedral Meshes}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-41896}, abstract = {We propose a novel GPU-based approach to render virtual X-ray projections of deformable tetrahedral meshes. These meshes represent the shape and the internal density distribution of a particular anatomical structure and are derived from statistical shape and intensity models (SSIMs). We apply our method to improve the geometric reconstruction of 3D anatomy (e.g.\ pelvic bone) from 2D X-ray images. For that purpose, shape and density of a tetrahedral mesh are varied and virtual X-ray projections are generated within an optimization process until the similarity between the computed virtual X-ray and the respective anatomy depicted in a given clinical X-ray is maximized. The OpenGL implementation presented in this work deforms and projects tetrahedral meshes of high resolution (200.000+ tetrahedra) at interactive rates. It generates virtual X-rays that accurately depict the density distribution of an anatomy of interest. Compared to existing methods that accumulate X-ray attenuation in deformable meshes, our novel approach significantly boosts the deformation/projection performance. The proposed projection algorithm scales better with respect to mesh resolution and complexity of the density distribution, and the combined deformation and projection on the GPU scales better with respect to the number of deformation parameters. The gain in performance allows for a larger number of cycles in the optimization process. Consequently, it reduces the risk of being stuck in a local optimum. We believe that our approach contributes in orthopedic surgery, where 3D anatomy information needs to be extracted from 2D X-rays to support surgeons in better planning joint replacements.}, language = {en} } @misc{ShinanoHeinzVigerskeetal., author = {Shinano, Yuji and Heinz, Stefan and Vigerske, Stefan and Winkler, Michael}, title = {FiberSCIP - A shared memory parallelization of SCIP}, issn = {1438-0064}, doi = {10.1287/ijoc.2017.0762}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42595}, abstract = {Recently, parallel computing environments have become significantly popular. In order to obtain the benefit of using parallel computing environments, we have to deploy our programs for these effectively. This paper focuses on a parallelization of SCIP (Solving Constraint Integer Programs), which is a MIP solver and constraint integer programming framework available in source code. There is a parallel extension of SCIP named ParaSCIP, which parallelizes SCIP on massively parallel distributed memory computing environments. This paper describes FiberSCIP, which is yet another parallel extension of SCIP to utilize multi-threaded parallel computation on shared memory computing environments, and has the following contributions: First, the basic concept of having two parallel extensions and the relationship between them and the parallelization framework provided by UG (Ubiquity Generator) is presented, including an implementation of deterministic parallelization. Second, the difficulties to achieve a good performance that utilizes all resources on an actual computing environment and the difficulties of performance evaluation of the parallel solvers are discussed. Third, a way to evaluate the performance of new algorithms and parameter settings of the parallel extensions is presented. Finally, current performance of FiberSCIP for solving mixed-integer linear programs (MIPs) and mixed-integer non-linear programs (MINLPs) in parallel is demonstrated.}, language = {en} } @misc{MasingLindnerEbert, author = {Masing, Berenike and Lindner, Niels and Ebert, Patricia}, title = {Forward and Line-Based Cycle Bases for Periodic Timetabling}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-89731}, abstract = {The optimization of periodic timetables is an indispensable planning task in public transport. Although the periodic event scheduling problem (PESP) provides an elegant mathematical formulation of the periodic timetabling problem that led to many insights for primal heuristics, it is notoriously hard to solve to optimality. One reason is that for the standard mixed-integer linear programming formulations, linear programming relaxations are weak and the integer variables are of pure technical nature and in general do not correlate with the objective value. While the first problem has been addressed by developing several families of cutting planes, we focus on the second aspect. We discuss integral forward cycle bases as a concept to compute improved dual bounds for PESP instances. To this end, we develop the theory of forward cycle bases on general digraphs. Specifically for the application of timetabling, we devise a generic procedure to construct line-based event-activity networks, and give a simple recipe for an integral forward cycle basis on such networks. Finally, we analyze the 16 railway instances of the benchmark library PESPlib, match them to the line-based structure and use forward cycle bases to compute better dual bounds for 14 out of the 16 instances.}, language = {en} } @misc{RiberaBorrellQuerRichteretal., author = {Ribera Borrell, Enric and Quer, Jannes and Richter, Lorenz and Sch{\"u}tte, Christof}, title = {Improving control based importance sampling strategies for metastable diffusions via adapted metadynamics}, issn = {1438-0064}, abstract = {Sampling rare events in metastable dynamical systems is often a computationally expensive task and one needs to resort to enhanced sampling methods such as importance sampling. Since we can formulate the problem of finding optimal importance sampling controls as a stochastic optimization problem, this then brings additional numerical challenges and the convergence of corresponding algorithms might as well suffer from metastabilty. In this article we address this issue by combining systematic control approaches with the heuristic adaptive metadynamics method. Crucially, we approximate the importance sampling control by a neural network, which makes the algorithm in principle feasible for high dimensional applications. We can numerically demonstrate in relevant metastable problems that our algorithm is more effective than previous attempts and that only the combination of the two approaches leads to a satisfying convergence and therefore to an efficient sampling in certain metastable settings.}, language = {en} } @misc{Krause, type = {Master Thesis}, author = {Krause, Jan}, title = {Investigation of Options to Handle 3D MRI Data via Convolutional Neural Networks Application in Knee Osteoarthritits Classification}, pages = {127}, language = {en} } @misc{ClasenPaarProhaska, author = {Clasen, Malte and Paar, Philip and Prohaska, Steffen}, title = {Level of Detail for Trees Using Clustered Ellipsoids}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-14251}, number = {11-41}, abstract = {We present a level of detail method for trees based on ellipsoids and lines. We leverage the Expectation Maximization algorithm with a Gaussian Mixture Model to create a hierarchy of high-quality leaf clusterings, while the branches are simplified using agglomerative bottom-up clustering to preserve the connectivity. The simplification runs in a preprocessing step and requires no human interaction. For a fly by over and through a scene of 10k trees, our method renders on average at 40 ms/frame, up to 6 times faster than billboard clouds with comparable artifacts.}, language = {en} } @misc{TateiwaShinanoYasudaetal., author = {Tateiwa, Nariaki and Shinano, Yuji and Yasuda, Masaya and Kaji, Shizuo and Yamamura, Keiichiro and Fujisawa, Katsuki}, title = {Massively parallel sharing lattice basis reduction}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-85209}, abstract = {For cryptanalysis in lattice-based schemes, the performance evaluation of lattice basis reduction using high-performance computers is becoming increasingly important for the determination of the security level. We propose a distributed and asynchronous parallel reduction algorithm based on randomization and DeepBKZ, which is an improved variant of the block Korkine-Zolotarev (BKZ) reduction algorithm. Randomized copies of a lattice basis are distributed to up to 103,680 cores and independently reduced in parallel, while some basis vectors are shared asynchronously among all processes via MPI. There is a trade-off between randomization and information sharing; if a substantial amount of information is shared, all processes will work on the same problem, thereby diminishing the benefit of parallelization. To monitor this balance between randomness and sharing, we propose a metric to quantify the variety of lattice bases. We empirically find an optimal parameter of sharing for high-dimensional lattices. We demonstrate the efficacy of our proposed parallel algorithm and implementation with respect to both performance and scalability through our experiments.}, language = {en} } @misc{KaplanLauferProhaskaetal., author = {Kaplan, Bernhard and Laufer, Jan and Prohaska, Steffen and Buchmann, Jens}, title = {Monte-Carlo-based inversion scheme for 3D quantitative photoacoustic tomography}, issn = {1438-0064}, doi = {10.1117/12.2251945}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-62318}, abstract = {The goal of quantitative photoacoustic tomography (qPAT) is to recover maps of the chromophore distributions from multiwavelength images of the initial pressure. Model-based inversions that incorporate the physical processes underlying the photoacoustic (PA) signal generation represent a promising approach. Monte-Carlo models of the light transport are computationally expensive, but provide accurate fluence distributions predictions, especially in the ballistic and quasi-ballistic regimes. Here, we focus on the inverse problem of 3D qPAT of blood oxygenation and investigate the application of the Monte-Carlo method in a model-based inversion scheme. A forward model of the light transport based on the MCX simulator and acoustic propagation modeled by the k-Wave toolbox was used to generate a PA image data set acquired in a tissue phantom over a planar detection geometry. The combination of the optical and acoustic models is shown to account for limited-view artifacts. In addition, the errors in the fluence due to, for example, partial volume artifacts and absorbers immediately adjacent to the region of interest are investigated. To accomplish large-scale inversions in 3D, the number of degrees of freedom is reduced by applying image segmentation to the initial pressure distribution to extract a limited number of regions with homogeneous optical parameters. The absorber concentration in the tissue phantom was estimated using a coordinate descent parameter search based on the comparison between measured and modeled PA spectra. The estimated relative concentrations using this approach lie within 5 \% compared to the known concentrations. Finally, we discuss the feasibility of this approach to recover the blood oxygenation from experimental data.}, language = {en} } @misc{AmbellanHanikvonTycowicz, author = {Ambellan, Felix and Hanik, Martin and von Tycowicz, Christoph}, title = {Morphomatics: Geometric morphometrics in non-Euclidean shape spaces}, doi = {10.12752/8544}, abstract = {Morphomatics is an open-source Python library for (statistical) shape analysis developed within the geometric data analysis and processing research group at Zuse Institute Berlin. It contains prototype implementations of intrinsic manifold-based methods that are highly consistent and avoid the influence of unwanted effects such as bias due to arbitrary choices of coordinates.}, language = {en} } @misc{D'AndreagiovanniRaymond, author = {D'Andreagiovanni, Fabio and Raymond, Annie}, title = {Multiband Robust Optimization and its Adoption in Harvest Scheduling}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-43380}, abstract = {A central assumption in classical optimization is that all the input data of a problem are exact. However, in many real-world problems, the input data are subject to uncertainty. In such situations, neglecting uncertainty may lead to nominally optimal solutions that are actually suboptimal or even infeasible. Robust optimization offers a remedy for optimization under uncertainty by considering only the subset of solutions protected against the data deviations. In this paper, we provide an overview of the main theoretical results of multiband robustness, a new robust optimization model that extends and refines the classical theory introduced by Bertsimas and Sim. After introducing some new results for the special case of pure binary programs, we focus on the harvest scheduling problem and show how multiband robustness can be adopted to tackle the uncertainty affecting the volume of produced timber and grant a reduction in the price of robustness.}, language = {en} } @misc{CostaMantonOstrovskyetal., author = {Costa, Marta and Manton, James D. and Ostrovsky, Aaron D. and Prohaska, Steffen and Jefferis, Gregory S.X.E.}, title = {NBLAST: Rapid, sensitive comparison of neuronal structure and construction of neuron family databases}, issn = {1438-0064}, doi = {10.1016/j.neuron.2016.06.012}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-59672}, abstract = {Neural circuit mapping is generating datasets of 10,000s of labeled neurons. New computational tools are needed to search and organize these data. We present NBLAST, a sensitive and rapid algorithm, for measuring pairwise neuronal similarity. NBLAST considers both position and local geometry, decomposing neurons into short segments; matched segments are scored using a probabilistic scoring matrix defined by statistics of matches and non-matches. We validated NBLAST on a published dataset of 16,129 single Drosophila neurons. NBLAST can distinguish neuronal types down to the finest level (single identified neurons) without a priori information. Cluster analysis of extensively studied neuronal classes identified new types and unreported topographical features. Fully automated clustering organized the validation dataset into 1052 clusters, many of which map onto previously described neuronal types. NBLAST supports additional query types including searching neurons against transgene expression patterns. Finally we show that NBLAST is effective with data from other invertebrates and zebrafish.}, language = {en} } @misc{BauschertBuesingD'Andreagiovannietal., author = {Bauschert, Thomas and B{\"u}sing, Christina and D'Andreagiovanni, Fabio and Koster, Arie M.C.A. and Kutschka, Manuel and Steglich, Uwe}, title = {Network Planning under Demand Uncertainty with Robust Optimization}, issn = {1438-0064}, doi = {10.1109/MCOM.2014.6736760}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42557}, abstract = {The planning of a communication network is inevitably depending on the quality of both the planning tool and the demand forecast used. In this article, we show exemplarily how the emerging area of Robust Optimization can advance the network planning by a more accurate mathematical description of the demand uncertainty. After a general introduction of the concept and its application to a basic network design problem, we present two applications: multi-layer and mixed-line-rate network design. We conclude with a discussion of extensions of the robustness concept to increase the accuracy of handling uncertainties.}, language = {en} } @misc{MunguiaOxberryRajanetal., author = {Munguia, Lluis-Miquel and Oxberry, Geoffrey and Rajan, Deepak and Shinano, Yuji}, title = {Parallel PIPS-SBB: Multi-Level Parallelism For Stochastic Mixed-Integer Programs}, number = {ZIB-Report 17-58}, issn = {1438-0064}, doi = {10.1007/s10589-019-00074-0}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-65517}, abstract = {PIPS-SBB is a distributed-memory parallel solver with a scalable data distribution paradigm. It is designed to solve MIPs with a dual-block angular structure, which is characteristic of deterministic-equivalent Stochastic Mixed-Integer Programs (SMIPs). In this paper, we present two different parallelizations of Branch \& Bound (B\&B), implementing both as extensions of PIPS-SBB, thus adding an additional layer of parallelism. In the first of the proposed frameworks, PIPS-PSBB, the coordination and load-balancing of the different optimization workers is done in a decentralized fashion. This new framework is designed to ensure all available cores are processing the most promising parts of the B\&B tree. The second, ug[PIPS-SBB,MPI], is a parallel implementation using the Ubiquity Generator (UG), a universal framework for parallelizing B\&B tree search that has been successfully applied to other MIP solvers. We show the effects of leveraging multiple levels of parallelism in potentially improving scaling performance beyond thousands of cores.}, language = {en} } @misc{LindnerReisch, author = {Lindner, Niels and Reisch, Julian}, title = {Parameterized Complexity of Periodic Timetabling}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-78314}, abstract = {Public transportation networks are typically operated with a periodic timetable. The Periodic Event Scheduling Problem (PESP) is the standard mathematical modelling tool for periodic timetabling. Since PESP can be solved in linear time on trees, it is a natural question to ask whether there are polynomial-time algorithms for input networks of bounded treewidth. We show that deciding the feasibility of a PESP instance is NP-hard even when the treewidth is 2, the branchwidth is 2, or the carvingwidth is 3. Analogous results hold for the optimization of reduced PESP instances, where the feasibility problem is trivial. To complete the picture, we present two pseudo-polynomial-time dynamic programming algorithms solving PESP on input networks with bounded tree- or branchwidth. We further analyze the parameterized complexity of PESP with bounded cyclomatic number, diameter, or vertex cover number. For event-activity networks with a special -- but standard -- structure, we give explicit and sharp bounds on the branchwidth in terms of the maximum degree and the carvingwidth of an underlying line network. Finally, we investigate several parameters on the smallest instance of the benchmarking library PESPlib.}, language = {en} } @misc{WiebelVosHege, author = {Wiebel, Alexander and Vos, Frans M. and Hege, Hans-Christian}, title = {Perception-Oriented Picking of Structures in Direct Volumetric Renderings}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-14343}, number = {11-45}, abstract = {Radiologists from all application areas are trained to read slice-based visualizations of 3D medical image data. Despite the numerous examples of sophisticated three-dimensional renderings, especially all variants of direct volume rendering, such methods are often considered not very useful by radiologists who prefer slice-based visualization. Just recently there have been attempts to bridge this gap between 2D and 3D renderings. These attempts include specialized techniques for volume picking that result in repositioning slices. In this paper, we present a new volume picking technique that, in contrast to previous work, does not require pre-segmented data or metadata. The positions picked by our method are solely based on the data itself, the transfer function and, most importantly, on the way the volumetric rendering is perceived by viewers. To demonstrate the usefulness of the proposed method we apply it for automatically repositioning slices in an abdominal MRI scan, a data set from a flow simulation and a number of other volumetric scalar fields. Furthermore we discuss how the method can be implemented in combination with various different volumetric rendering techniques.}, language = {en} } @misc{GriewankStreubelLehmannetal., author = {Griewank, Andreas and Streubel, Tom and Lehmann, Lutz and Hasenfelder, Richard and Radons, Manuel}, title = {Piecewise linear secant approximation via Algorithmic Piecewise Differentiation}, issn = {1438-0064}, doi = {10.1080/10556788.2017.1387256}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-61642}, abstract = {It is shown how piecewise differentiable functions \(F: R^n → R^m\) that are defined by evaluation programs can be approximated locally by a piecewise linear model based on a pair of sample points x̌ and x̂. We show that the discrepancy between function and model at any point x is of the bilinear order O(||x - x̌|| ||x - x̂||). This is a little surprising since x ∈ R^n may vary over the whole Euclidean space, and we utilize only two function samples F̌ = F(x̌) and F̂ = F(x̂), as well as the intermediates computed during their evaluation. As an application of the piecewise linearization procedure we devise a generalized Newton's method based on successive piecewise linearization and prove for it sufficient conditions for convergence and convergence rates equaling those of semismooth Newton. We conclude with the derivation of formulas for the numerically stable implementation of the aforedeveloped piecewise linearization methods.}, language = {en} } @misc{HillerVredeveld, author = {Hiller, Benjamin and Vredeveld, Tjark}, title = {Probabilistic alternatives for competitive analysis}, issn = {1438-0064}, doi = {10.1007/s00450-011-0149-1}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-15131}, abstract = {In the last 20 years competitive analysis has become the main tool for analyzing the quality of online algorithms. Despite of this, competitive analysis has also been criticized: It sometimes cannot discriminate between algorithms that exhibit significantly different empirical behavior, or it even favors an algorithm that is worse from an empirical point of view. Therefore, there have been several approaches to circumvent these drawbacks. In this survey, we discuss probabilistic alternatives for competitive analysis.}, language = {en} } @misc{LieSullivanTeckentrup, author = {Lie, Han Cheng and Sullivan, T. J. and Teckentrup, Aretha}, title = {Random forward models and log-likelihoods in Bayesian inverse problems}, series = {SIAM/ASA Journal on Uncertainty Quantification}, volume = {6}, journal = {SIAM/ASA Journal on Uncertainty Quantification}, number = {4}, issn = {1438-0064}, doi = {10.1137/18M1166523}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-66324}, pages = {1600 -- 1629}, abstract = {We consider the use of randomised forward models and log-likelihoods within the Bayesian approach to inverse problems. Such random approximations to the exact forward model or log-likelihood arise naturally when a computationally expensive model is approximated using a cheaper stochastic surrogate, as in Gaussian process emulation (kriging), or in the field of probabilistic numerical methods. We show that the Hellinger distance between the exact and approximate Bayesian posteriors is bounded by moments of the difference between the true and approximate log-likelihoods. Example applications of these stability results are given for randomised misfit models in large data applications and the probabilistic solution of ordinary differential equations.}, language = {en} } @misc{Witzig, type = {Master Thesis}, author = {Witzig, Jakob}, title = {Reoptimization Techniques in MIP Solvers}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-54067}, pages = {176}, abstract = {Many optimization problems can be modeled as Mixed Integer Programs (MIPs). In general, MIPs cannot be solved efficiently, since solving MIPs is NP-hard, see, e.g., Schrijver, 2003. Common methods for solving NP-hard problems are branch-and-bound and column generation. In the case of column generation, the original problem becomes decomposed or re-formulated into one ore more smaller subproblems, which are easier to solve. Each of these subproblems is solved separately and recurrently, which can be interpreted as solving a sequence of optimization problems. In this thesis, we consider a sequence of MIPs which only differ in the respective objective functions. Furthermore, we assume each of these MIPs get solved with a branch-and-bound algorithm. This thesis aims to figure out whether the solving process of a given sequence of MIPs can be accelerated by reoptimization. As reoptimization we understand starting the solving process of a MIP of this sequence at a given frontier of a search tree corresponding to another MIP of this sequence. At the beginning we introduce an LP-based branch-and-bound algorithm. This algorithm is inspired by the reoptimizing algorithm of Hiller, Klug, and the author of this thesis, 2013. Since most of the state-of-the-art MIP solvers come to decisions based on dual information, which leads to the loss of feasible solutions after changing the objective function, we present a technique to guarantee optimality despite using these information. A decision is based on a dual information if this decision is valid for at least one feasible solution, whereas a decision is based on a primal information if this decision is valid for all feasible solutions. Afterwards, we consider representing the search frontier of the tree by a set of nodes of a given size. We call this the Tree Compression Problem. Moreover, we present a criterion characterizing the similarity of two objective functions. To evaluate our approach of reoptimization we extend the well-known and well-maintained MIP solver SCIP to an LP-based branch-and-bound framework, introduce two heuristics for solving the Tree Compression Problem, and a primal heuristic which is especially fitted to column generation. Finally, we present computational experiments on several problem classes, e.g., the Vertex Coloring and k-Constrained Shortest Path. Our experiments show, that a straightforward reoptimization, i.e., without additional heuristics, provides no benefit in general. However, in combination with the techniques and methods presented in this thesis, we can accelerate the solving of a given sequence up to the factor 14. For this purpose it is essential to take the differences of the objective functions into account and to restart the reoptimization, i.e., solve the subproblem from scratch, if the objective functions are not similar enough. Finally, we discuss the possibility to parallelize the solving process of the search frontier at the beginning of each solving process.}, language = {en} } @misc{BaumLindowHegeetal., author = {Baum, Daniel and Lindow, Norbert and Hege, Hans-Christian and Lepper, Verena and Siopi, Tzulia and Kutz, Frank and Mahlow, Kristin and Mahnke, Heinz-Eberhard}, title = {Revealing hidden text in rolled and folded papyri}, issn = {1438-0064}, doi = {10.1007/s00339-017-0808-6}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-61826}, abstract = {Ancient Egyptian papyri are often folded, rolled up or kept as small packages, sometimes even sealed. Physically unrolling or unfolding these packages might severely damage them. We demonstrate a way to get access to the hidden script without physical unfolding by employing computed tomography and mathematical algorithms for virtual unrolling and unfolding. Our algorithmic approaches are combined with manual interaction. This provides the necessary flexibility to enable the unfolding of even complicated and partly damaged papyrus packages. In addition, it allows us to cope with challenges posed by the structure of ancient papyrus, which is rather irregular, compared to other writing substrates like metallic foils or parchment. Unfolding of packages is done in two stages. In the first stage, we virtually invert the physical folding process step by step until the partially unfolded package is topologically equivalent to a scroll or a papyrus sheet folded only along one fold line. To minimize distortions at this stage, we apply the method of moving least squares. In the second stage, the papyrus is simply flattened, which requires the definition of a medial surface. We have applied our software framework to several papyri. In this work, we present the results of applying our approaches to mockup papyri that were either rolled or folded along perpendicular fold lines. In the case of the folded papyrus, our approach represents the first attempt to address the unfolding of such complicated folds.}, language = {en} } @misc{BleyD'AndreagiovanniKarch, author = {Bley, Andreas and D'Andreagiovanni, Fabio and Karch, Daniel}, title = {Scheduling technology migration in WDM Networks}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42654}, abstract = {The rapid technological evolution of telecommunication networks demands service providers to regularly update their technology, with the aim of remaining competitive in the marketplace. However, upgrading the technology in a network is not a trivial task. New hardware components need to be installed in the network and during the installation network connectivity may be temporarily compromised. The Wavelength Division Multiplexing (WDM) technology, whose upgrade is considered in here, shares fiber links among several optical connections and tearing down a single link may disrupt several optical connections at once. When the upgrades involve large parts of a network, typically not all links can be upgraded in parallel, which may lead to an unavoidable longer disruption of some connections. A bad scheduling of the overall endeavor, however, can dramatically increase the disconnection time of parts of the networks, causing extended service disruption. In this contribution, we study the problem of finding a schedule of the fiber link upgrades that minimizes the total service disruption time. To the best of our knowledge, this problem has not yet been formalized and investigated. The aim of our work is to close this gap by presenting a mathematical optimization model for the problem and an innovative solution algorithm that tackles the intrinsic difficulties of the problem. Computational experience on realistic instances completes our study. Our original investigations have been driven by real needs of DFN, operator of the German National Research and Education Network and our partner in the BMBF research project ROBUKOM (http://www.robukom.de/).}, language = {en} } @misc{OezelKulkarniHasanetal., author = {{\"O}zel, M. Neset and Kulkarni, Abhishek and Hasan, Amr and Brummer, Josephine and Moldenhauer, Marian and Daumann, Ilsa-Maria and Wolfenberg, Heike and Dercksen, Vincent J. and Kiral, F. Ridvan and Weiser, Martin and Prohaska, Steffen and von Kleist, Max and Hiesinger, Peter Robin}, title = {Serial synapse formation through filopodial competition for synaptic seeding factors}, issn = {1438-0064}, doi = {10.1016/j.devcel.2019.06.014}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-74397}, abstract = {Following axon pathfinding, growth cones transition from stochastic filopodial exploration to the formation of a limited number of synapses. How the interplay of filopodia and synapse assembly ensures robust connectivity in the brain has remained a challenging problem. Here, we developed a new 4D analysis method for filopodial dynamics and a data-driven computational model of synapse formation for R7 photoreceptor axons in developing Drosophila brains. Our live data support a 'serial synapse formation' model, where at any time point only a single 'synaptogenic' filopodium suppresses the synaptic competence of other filopodia through competition for synaptic seeding factors. Loss of the synaptic seeding factors Syd-1 and Liprin-α leads to a loss of this suppression, filopodial destabilization and reduced synapse formation, which is sufficient to cause the destabilization of entire axon terminals. Our model provides a filopodial 'winner-takes-all' mechanism that ensures the formation of an appropriate number of synapses.}, language = {en} } @misc{Keidel, type = {Master Thesis}, author = {Keidel, Stefan}, title = {Snapshots in Scalaris}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42282}, school = {Zuse Institute Berlin (ZIB)}, pages = {87}, abstract = {Eines der gr{\"o}ßten Hindernisse beim praktischen Einsatz von Scalaris, einer skalierbaren Implementierung einer verteilten Hashtabelle mit Unterst{\"u}tzung f{\"u}r Transaktionen, ist das Fehlen eines Verfahrens zur Aufnahme eines konsistenten Zustandes des gesamten Systems. Wir stellen in dieser Arbeit ein einfaches Protokoll vor, dass diese Aufgabe erf{\"u}llt und sich, auf Grund der von uns gew{\"a}hlten Herangehensweise, leicht implementieren l{\"a}sst. Als Ausgangspunkt daf{\"u}r w{\"a}hlen wir aus einer Reihe von „klassischen" Snapshot-Algorithmen ein 1993 von Mattern entworfenes Verfahren, welches auf dem Algorithmus von Lai und Yang basiert, aus. Diese Entscheidung basiert auf einer gr{\"u}ndlichen Analyse der Protokolle unter Ber{\"u}cksichtigung der Architektur der existierenden Software. Im n{\"a}chsten Arbeitsschritt benutzen wir unser vollst{\"a}ndiges Wissen {\"u}ber die Interna des Transaktionssystems von Scalaris und vereinfachen damit das Verfahren hinsichtlich Benutzbarkeit und Implementierungskomplexit{\"a}t, ohne die Anforderungen an den aufgenommenen Zustand aufzuweichen. Statt einer losen Anh{\"a}ufung lokaler Zust{\"a}nde der einzelnen Teilnehmerknoten k{\"o}nnen wir am Ende eine große Schl{\"u}ssel-Wert-Tabelle als Ergebnis erzeugen, die konsistent ist, sich leicht weiterverarbeiten l{\"a}sst und die einem Zustand entspricht, in dem sich das System einmal befunden haben k{\"o}nnte. Nachdem wir das Verfahren dann in Software umgesetzt haben, werten wir die Ergebnisse hinsichtlich des Einflusses auf die Performanz des Gesamtsystems aus und diskutieren m{\"o}gliche Weiterentwicklungen.}, language = {de} } @misc{FujiiItoKimetal., author = {Fujii, Koichi and Ito, Naoki and Kim, Sunyoung and Kojima, Masakazu and Shinano, Yuji and Toh, Kim-Chuan}, title = {Solving Challenging Large Scale QAPs}, issn = {1438-0064}, doi = {10.12752/8130}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-81303}, abstract = {We report our progress on the project for solving larger scale quadratic assignment problems (QAPs). Our main approach to solve large scale NP-hard combinatorial optimization problems such as QAPs is a parallel branch-and-bound method efficiently implemented on a powerful computer system using the Ubiquity Generator(UG) framework that can utilize more than 100,000 cores. Lower bounding procedures incorporated in the branch-and-bound method play a crucial role in solving the problems. For a strong lower bounding procedure, we employ the Lagrangian doubly nonnegative (DNN) relaxation and the Newton-bracketing method developed by the authors' group. In this report, we describe some basic tools used in the project including the lower bounding procedure and branching rules, and present some preliminary numerical results. Our next target problem is QAPs with dimension at least 50, as we have succeeded to solve tai30a and sko42 from QAPLIB for the first time.}, language = {en} } @misc{ShinanoAchterbergBertholdetal., author = {Shinano, Yuji and Achterberg, Tobias and Berthold, Timo and Heinz, Stefan and Koch, Thorsten and Winkler, Michael}, title = {Solving Open MIP Instances with ParaSCIP on Supercomputers using up to 80,000 Cores}, issn = {1438-0064}, doi = {10.1109/IPDPS.2016.56}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-56404}, abstract = {This paper describes how we solved 12 previously unsolved mixed-integer program- ming (MIP) instances from the MIPLIB benchmark sets. To achieve these results we used an enhanced version of ParaSCIP, setting a new record for the largest scale MIP computation: up to 80,000 cores in parallel on the Titan supercomputer. In this paper we describe the basic parallelization mechanism of ParaSCIP, improvements of the dynamic load balancing and novel techniques to exploit the power of parallelization for MIP solving. We give a detailed overview of computing times and statistics for solving open MIPLIB instances.}, language = {en} } @misc{ShinanoAchterbergBertholdetal., author = {Shinano, Yuji and Achterberg, Tobias and Berthold, Timo and Heinz, Stefan and Koch, Thorsten and Winkler, Michael}, title = {Solving Previously Unsolved MIP Instances with ParaSCIP on Supercomputers by using up to 80,000 Cores}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-78393}, abstract = {Mixed-integer programming (MIP) problem is arguably among the hardest classes of optimization problems. This paper describes how we solved 21 previously unsolved MIP instances from the MIPLIB benchmark sets. To achieve these results we used an enhanced version of ParaSCIP, setting a new record for the largest scale MIP computation: up to 80,000 cores in parallel on the Titan supercomputer. In this paper, we describe the basic parallelization mechanism of ParaSCIP, improvements of the dynamic load balancing and novel techniques to exploit the power of parallelization for MIP solving. We give a detailed overview of computing times and statistics for solving open MIPLIB instances.}, language = {en} } @misc{HillerVredeveld, author = {Hiller, Benjamin and Vredeveld, Tjark}, title = {Stochastic dominance analysis of Online Bin Coloring algorithms}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-16502}, abstract = {This paper proposes a new method for probabilistic analysis of online algorithms. It is based on the notion of stochastic dominance. We develop the method for the online bin coloring problem introduced by Krumke et al (2008). Using methods for the stochastic comparison of Markov chains we establish the result that the performance of the online algorithm GreedyFit is stochastically better than the performance of the algorithm OneBin for any number of items processed. This result gives a more realistic picture than competitive analysis and explains the behavior observed in simulations.}, language = {en} } @misc{WendeSteinke, author = {Wende, Florian and Steinke, Thomas}, title = {Swendsen-Wang Multi-Cluster Algorithm for the 2D/3D Ising Model on Xeon Phi and GPU}, issn = {1438-0064}, doi = {10.1145/2503210.2503254}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42187}, abstract = {Simulations of the critical Ising model by means of local update algorithms suffer from critical slowing down. One way to partially compensate for the influence of this phenomenon on the runtime of simulations is using increasingly faster and parallel computer hardware. Another approach is using algorithms that do not suffer from critical slowing down, such as cluster algorithms. This paper reports on the Swendsen-Wang multi-cluster algorithm on Intel Xeon Phi coprocessor 5110P, Nvidia Tesla M2090 GPU, and x86 multi-core CPU. We present shared memory versions of the said algorithm for the simulation of the two- and three-dimensional Ising model. We use a combination of local cluster search and global label reduction by means of atomic hardware primitives. Further, we describe an MPI version of the algorithm on Xeon Phi and CPU, respectively. Significant performance improvements over known im plementations of the Swendsen-Wang algorithm are demonstrated.}, language = {en} } @misc{DercksenHegeOberlaender2013, author = {Dercksen, Vincent J. and Hege, Hans-Christian and Oberlaender, Marcel}, title = {The Filament Editor: An Interactive Software Environment for Visualization, Proof-Editing and Analysis of 3D Neuron Morphology}, issn = {1438-0064}, doi = {10.1007/s12021-013-9213-2}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-43157}, year = {2013}, abstract = {Neuroanatomical analysis, such as classification of cell types, depends on reliable reconstruction of large numbers of complete 3D dendrite and axon morphologies. At present, the majority of neuron reconstructions are obtained from preparations in a single tissue slice in vitro, thus suffering from cut off dendrites and, more dramatically, cut off axons. In general, axons can innervate volumes of several cubic millimeters and may reach path lengths of tens of centimeters. Thus, their complete reconstruction requires in vivo labeling, histological sectioning and imaging of large fields of view. Unfortunately, anisotropic background conditions across such large tissue volumes, as well as faintly labeled thin neurites, result in incomplete or erroneous automated tracings and even lead experts to make annotation errors during manual reconstructions. Consequently, tracing reliability renders the major bottleneck for reconstructing complete 3D neuron morphologies. Here, we present a novel set of tools, integrated into a software environment named 'Filament Editor', for creating reliable neuron tracings from sparsely labeled in vivo datasets. The Filament Editor allows for simultaneous visualization of complex neuronal tracings and image data in a 3D viewer, proof-editing of neuronal tracings, alignment and interconnection across sections, and morphometric analysis in relation to 3D anatomical reference structures. We illustrate the functionality of the Filament Editor on the example of in vivo labeled axons and demonstrate that for the exemplary dataset the final tracing results after proof-editing are independent of the expertise of the human operator.}, language = {en} } @misc{Shinano, author = {Shinano, Yuji}, title = {The Ubiquity Generator Framework: 7 Years of Progress in Parallelizing Branch-and-Bound}, issn = {1438-0064}, doi = {10.1007/978-3-319-89920-6_20}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-65545}, abstract = {Mixed integer linear programming (MIP) is a general form to model combinatorial optimization problems and has many industrial applications. The performance of MIP solvers has improved tremendously in the last two decades and these solvers have been used to solve many real-word problems. However, against the backdrop of modern computer technology, parallelization is of pivotal importance. In this way, ParaSCIP is the most successful parallel MIP solver in terms of solving previously unsolvable instances from the well-known benchmark instance set MIPLIB by using supercomputers. It solved two instances from MIPLIB2003 and 12 from MIPLIB2010 for the first time to optimality by using up to 80,000 cores on supercomputers. ParaSCIP has been developed by using the Ubiquity Generator (UG) framework, which is a general software package to parallelize any state-of-the-art branch-and-bound based solver. This paper discusses 7 years of progress in parallelizing branch-and-bound solvers with UG.}, language = {en} } @misc{Shinano, author = {Shinano, Yuji}, title = {UG - Ubiquity Generator Framework v0.9.1}, doi = {10.12752/8508}, abstract = {UG is a generic framework to parallelize branch-and-bound based solvers (e.g., MIP, MINLP, ExactIP) in a distributed or shared memory computing environment. It exploits the powerful performance of state-of-the-art "base solvers", such as SCIP, CPLEX, etc. without the need for base solver parallelization. UG framework, ParaSCIP(ug[SCIP,MPI]) and FiberSCIP (ug[SCIP,Pthreads]) are available as a beta version. For MIP solving, ParaSCIP and FiberSCIP are well debugged and should be stable. For MINLP solving, they are relatively stable, but not as thoroughly debugged. This release version should handle branch-and-cut approaches where subproblems are defined by variable bounds and also by constrains for ug[SCIP,*] ParaSCIP and FiberSCIP). Therefore, problem classes other than MIP or MINLP can be handled, but they have not been tested yet. v0.9.1: Update orbitope cip files.}, language = {en} } @misc{Shinano, author = {Shinano, Yuji}, title = {UG - Ubiquity Generator Framework v1.0.0beta}, doi = {10.12752/8521}, abstract = {UG is a generic framework to parallelize branch-and-bound based solvers (e.g., MIP, MINLP, ExactIP) in a distributed or shared memory computing environment. It exploits the powerful performance of state-of-the-art "base solvers", such as SCIP, CPLEX, etc. without the need for base solver parallelization. UG framework, ParaSCIP(ug[SCIP,MPI]) and FiberSCIP (ug[SCIP,Pthreads]) are available as a beta version. v1.0.0: new documentation and cmake, generalization of ug framework, implementation of selfsplitrampup for fiber- and parascip, better memory and time limit handling.}, language = {en} } @misc{HaslerPetersKottig, author = {Hasler, Tim and Peters-Kottig, Wolfgang}, title = {Vorschrift oder Thunfisch? - Zur Langzeitverf{\"u}gbarkeit von Forschungsdaten}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-43010}, abstract = {„Ich mache ihm ein Angebot, das er nicht ablehnen kann." Diese Aussage aus einem g{\"a}nzlich anderen Kontext l{\"a}sst sich recht treffend {\"u}bertragen als Wunsch von Dienstleistern und Zweck von Dienstleistungen f{\"u}r Datenproduzenten im Forschungsdatenmanagement. Zwar wirkt Druck zur Daten{\"u}bergabe nicht f{\"o}rderlich, die Er{\"o}ffnung einer Option aber sehr wohl. Im vorliegenden Artikel geht es um das Verst{\"a}ndnis der Nachhaltigkeit von Forschung und ihren Daten anhand der Erkenntnisse und Erfahrungen aus der ersten Phase des DFG-Projekts EWIG. [Fn 01] Eine Auswahl von Fallstricken beim Forschungsdatenmanagement wird anhand der Erkenntnisse aus Expertengespr{\"a}chen und eigenen Erfahrungen beim Aufbau von LZA-Workflows vorgestellt. Erste Konzepte in EWIG zur Daten{\"u}bertragung aus unterschiedlich strukturierten Datenquellen in die „Langfristige Dom{\"a}ne" werden beschrieben.}, language = {de} } @misc{FujiiItoKimetal., author = {Fujii, Koichi and Ito, Naoki and Kim, Sunyoung and Kojima, Masakazu and Shinano, Yuji and Toh, Kim-Chuan}, title = {大規模二次割当問題への挑戦}, series = {統計数理研究所共同研究リポート 453 最適化:モデリングとアルゴリズム33 2022年3月 「大規模二次割当問題への挑戦」 p.84-p.92}, journal = {統計数理研究所共同研究リポート 453 最適化:モデリングとアルゴリズム33 2022年3月 「大規模二次割当問題への挑戦」 p.84-p.92}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-86779}, abstract = {二次割当問題は線形緩和が弱いことが知られ,強化のため多様な緩和手法が考案されているが,その一つである二重非負値計画緩和( DNN 緩和)及びその解法として近年研究が進んでいるニュートン・ブラケット法を紹介し,それらに基づく分枝限定法の実装及び数値実験結果について報告する.}, language = {ja} }