@article{ZinserZachowSailer2013, author = {Zinser, Max and Zachow, Stefan and Sailer, Hermann}, title = {Bimaxillary "rotation advancement" procedures in patients with obstructive sleep apnea: A 3-dimensional airway analysis of morphological changes}, series = {International Journal of Oral \& Maxillofacial Surgery}, volume = {42}, journal = {International Journal of Oral \& Maxillofacial Surgery}, number = {5}, doi = {10.1016/j.ijom.2012.08.002}, pages = {569 -- 578}, year = {2013}, language = {en} } @inproceedings{ZilskeLameckerZachow2008, author = {Zilske, Michael and Lamecker, Hans and Zachow, Stefan}, title = {Adaptive Remeshing of Non-Manifold Surfaces}, series = {Eurographics 2008 Annex to the Conf. Proc.}, booktitle = {Eurographics 2008 Annex to the Conf. Proc.}, pages = {207 -- 211}, year = {2008}, language = {en} } @misc{ZilskeLameckerZachow, author = {Zilske, Michael and Lamecker, Hans and Zachow, Stefan}, title = {Adaptive Remeshing of Non-Manifold Surfaces}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-9445}, number = {07-01}, abstract = {We present a unified approach for consistent remeshing of arbitrary non-manifold triangle meshes with additional user-defined feature lines, which together form a feature skeleton. Our method is based on local operations only and produces meshes of high regularity and triangle quality while preserving the geometry as well as topology of the feature skeleton and the input mesh.}, language = {en} } @article{ZeilhoferZachowFairleyetal.2000, author = {Zeilhofer, Hans-Florian and Zachow, Stefan and Fairley, Jeffrey and Sader, Robert and Deuflhard, Peter}, title = {Treatment Planning and Simulation in Craniofacial Surgery with Virtual Reality Techiques}, series = {Journal of Cranio-Maxillofacial Surgery}, volume = {28 (Suppl. 1)}, journal = {Journal of Cranio-Maxillofacial Surgery}, pages = {82}, year = {2000}, language = {en} } @article{ZahnGrotjohannRammetal., author = {Zahn, Robert and Grotjohann, Sarah and Ramm, Heiko and Zachow, Stefan and Putzier, Michael and Perka, Carsten and Tohtz, Stephan}, title = {Pelvic tilt compensates for increased acetabular anteversion}, series = {International Orthopaedics}, volume = {40}, journal = {International Orthopaedics}, number = {8}, doi = {10.1007/s00264-015-2949-6}, pages = {1571 -- 1575}, abstract = {Pelvic tilt determines functional orientation of the acetabulum. In this study, we investigated the interaction of pelvic tilt and functional acetabular anteversion (AA) in supine position.}, language = {en} } @article{ZahnGrotjohannRammetal., author = {Zahn, Robert and Grotjohann, Sarah and Ramm, Heiko and Zachow, Stefan and Pumberger, Matthias and Putzier, Michael and Perka, Carsten and Tohtz, Stephan}, title = {Influence of pelvic tilt on functional acetabular orientation}, series = {Technology and Health Care}, volume = {25}, journal = {Technology and Health Care}, number = {3}, publisher = {IOS Press}, doi = {10.3233/THC-161281}, pages = {557 -- 565}, language = {en} } @misc{ZachowZilskeHege, author = {Zachow, Stefan and Zilske, Michael and Hege, Hans-Christian}, title = {3D reconstruction of individual anatomy from medical image data: Segmentation and geometry processing}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-10440}, number = {07-41}, abstract = {For medical diagnosis, visualization, and model-based therapy planning three-dimensional geometric reconstructions of individual anatomical structures are often indispensable. Computer-assisted, model-based planning procedures typically cover specific modifications of "virtual anatomy" as well as numeric simulations of associated phenomena, like e.g. mechanical loads, fluid dynamics, or diffusion processes, in order to evaluate a potential therapeutic outcome. Since internal anatomical structures cannot be measured optically or mechanically in vivo, three-dimensional reconstruction of tomographic image data remains the method of choice. In this work the process chain of individual anatomy reconstruction is described which consists of segmentation of medical image data, geometrical reconstruction of all relevant tissue interfaces, up to the generation of geometric approximations (boundary surfaces and volumetric meshes) of three-dimensional anatomy being suited for finite element analysis. All results presented herein are generated with amira ® - a highly interactive software system for 3D data analysis, visualization and geometry reconstruction.}, language = {en} } @inproceedings{ZachowZilskeHege2007, author = {Zachow, Stefan and Zilske, Michael and Hege, Hans-Christian}, title = {3D Reconstruction of Individual Anatomy from Medical Image Data: Segmentation and Geometry Processing}, series = {25. ANSYS Conference \& CADFEM Users' Meeting}, booktitle = {25. ANSYS Conference \& CADFEM Users' Meeting}, address = {Dresden}, year = {2007}, language = {en} } @incollection{ZachowWeiserHegeetal.2005, author = {Zachow, Stefan and Weiser, Martin and Hege, Hans-Christian and Deuflhard, Peter}, title = {Soft Tissue Prediction in Computer Assisted Maxillofacial Surgery Planning}, series = {Biomechanics Applied to Computer Assisted Surgery}, booktitle = {Biomechanics Applied to Computer Assisted Surgery}, editor = {Payan, Y.}, publisher = {Research Signpost}, pages = {277 -- 298}, year = {2005}, language = {en} } @incollection{ZachowWeiserDeuflhard2008, author = {Zachow, Stefan and Weiser, Martin and Deuflhard, Peter}, title = {Modellgest{\"u}tzte Operationsplanung in der Kopfchirurgie}, series = {Modellgest{\"u}tzte Therapie}, booktitle = {Modellgest{\"u}tzte Therapie}, editor = {Niederlag, Wolfgang and Lemke, Heinz and Meixensberger, J{\"u}rgen and Baumann, Michael}, publisher = {Health Academy}, pages = {140 -- 156}, year = {2008}, language = {en} } @article{ZachowSteinmannHildebrandtetal.2006, author = {Zachow, Stefan and Steinmann, Alexander and Hildebrandt, Thomas and Weber, Rainer and Heppt, Werner}, title = {CFD simulation of nasal airflow: Towards treatment planning for functional rhinosurgery}, series = {Int. J. of Computer Assisted Radiology and Surgery}, journal = {Int. J. of Computer Assisted Radiology and Surgery}, publisher = {Springer}, pages = {165 -- 167}, year = {2006}, language = {en} } @article{ZachowSteinmannHildebrandtetal.2007, author = {Zachow, Stefan and Steinmann, Alexander and Hildebrandt, Thomas and Heppt, Werner}, title = {Understanding nasal airflow via CFD simulation and visualization}, series = {Proc. Computer Aided Surgery around the Head}, journal = {Proc. Computer Aided Surgery around the Head}, pages = {173 -- 176}, year = {2007}, language = {en} } @article{ZachowMuiggHildebrandtetal.2009, author = {Zachow, Stefan and Muigg, Philipp and Hildebrandt, Thomas and Doleisch, Helmut and Hege, Hans-Christian}, title = {Visual Exploration of Nasal Airflow}, series = {IEEE Transactions on Visualization and Computer Graphics}, volume = {15}, journal = {IEEE Transactions on Visualization and Computer Graphics}, number = {8}, doi = {10.1109/TVCG.2009.198}, pages = {1407 -- 1414}, year = {2009}, language = {en} } @inproceedings{ZachowLuethStallingetal.1999, author = {Zachow, Stefan and Lueth, Tim and Stalling, Detlev and Hein, Andreas and Klein, Martin and Menneking, Horst}, title = {Optimized Arrangement of Osseointegrated Implants: A Surgical Planning System for the Fixation of Facial Protheses}, series = {Computer Assisted Radiology and Surgery (CARS'99)}, booktitle = {Computer Assisted Radiology and Surgery (CARS'99)}, publisher = {Elsevier Science B.V.}, pages = {942 -- 946}, year = {1999}, language = {en} } @article{ZachowLameckerZoeckleretal.2009, author = {Zachow, Stefan and Lamecker, Hans and Z{\"o}ckler, Maja and Haberl, Ernst}, title = {Computergest{\"u}tzte Planung zur chirurgischen Korrektur von fr{\"u}hkindlichen Sch{\"a}delfehlbildungen (Craniosynostosen)}, series = {Face 02/09, Int. Mag. of Orofacial Esthetics, Oemus Journale Leipzig}, journal = {Face 02/09, Int. Mag. of Orofacial Esthetics, Oemus Journale Leipzig}, pages = {48 -- 53}, year = {2009}, language = {en} } @inproceedings{ZachowLameckerElsholtzetal.2005, author = {Zachow, Stefan and Lamecker, Hans and Elsholtz, Barbara and Stiller, Michael}, title = {Reconstruction of mandibular dysplasia using a statistical 3D shape model}, series = {Proc. Computer Assisted Radiology and Surgery (CARS)}, booktitle = {Proc. Computer Assisted Radiology and Surgery (CARS)}, address = {Berlin, Germany}, doi = {10.1016/j.ics.2005.03.339}, pages = {1238 -- 1243}, year = {2005}, language = {en} } @article{ZachowLameckerElsholtzetal.2006, author = {Zachow, Stefan and Lamecker, Hans and Elsholtz, Barbara and Stiller, Michael}, title = {Is the course of the mandibular nerve deducible from the shape of the mandible?}, series = {Int. J. of Computer Assisted Radiology and Surgery}, journal = {Int. J. of Computer Assisted Radiology and Surgery}, publisher = {Springer}, pages = {415 -- 417}, year = {2006}, language = {en} } @inproceedings{ZachowKubiackMalinowskietal.2010, author = {Zachow, Stefan and Kubiack, Kim and Malinowski, Jana and Lamecker, Hans and Essig, Harald and Gellrich, Nils-Claudius}, title = {Modellgest{\"u}tzte chirurgische Rekonstruktion komplexer Mittelgesichtsfrakturen}, series = {Proc. BMT, Biomed Tech 2010}, volume = {55 (Suppl 1)}, booktitle = {Proc. BMT, Biomed Tech 2010}, publisher = {Walter de Gruyter-Verlag}, pages = {107 -- 108}, year = {2010}, language = {de} } @inproceedings{ZachowHierlErdmann2004, author = {Zachow, Stefan and Hierl, Thomas and Erdmann, Bodo}, title = {A quantitative evaluation of 3D soft tissue prediction in maxillofacial surgery planning}, series = {Proc. 3. Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboter-assistierte Chirurgie e.V.}, booktitle = {Proc. 3. Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboter-assistierte Chirurgie e.V.}, address = {M{\"u}nchen}, year = {2004}, language = {en} } @inproceedings{ZachowHierlErdmann2004, author = {Zachow, Stefan and Hierl, Thomas and Erdmann, Bodo}, title = {On the Predictability of tissue changes after osteotomy planning in maxillofacial surgery}, series = {Computer Assisted Radiology and Surgery (CARS)}, booktitle = {Computer Assisted Radiology and Surgery (CARS)}, address = {Chicago, USA}, doi = {10.1016/j.ics.2004.03.043}, pages = {648 -- 653}, year = {2004}, language = {en} } @inproceedings{ZachowHierlErdmann2004, author = {Zachow, Stefan and Hierl, Thomas and Erdmann, Bodo}, title = {{\"U}ber die Genauigkeit einer 3D Weichgewebepr{\"a}diktion in der MKG-Cirurgie}, series = {Workshop 'Bildverarbeitung f{\"u}r die Medizin' (BVM)}, booktitle = {Workshop 'Bildverarbeitung f{\"u}r die Medizin' (BVM)}, address = {Berlin, Germany}, pages = {75 -- 79}, year = {2004}, language = {en} } @article{ZachowHeppt, author = {Zachow, Stefan and Heppt, Werner}, title = {The Facial Profile}, series = {Facial Plastic Surgery}, volume = {31}, journal = {Facial Plastic Surgery}, number = {5}, doi = {10.1055/s-0035-1566132}, pages = {419 -- 420}, abstract = {Facial appearance in our societies is often associated with notions of attractiveness, juvenileness, beauty, success, and so forth. Hence, the role of facial plastic surgery is highly interrelated to a patient's desire to feature many of these positively connoted attributes, which of course, are subject of different cultural perceptions or social trends. To judge about somebody's facial appearance, appropriate quantitative measures as well as methods to obtain and compare individual facial features are required. This special issue on facial profile is intended to provide an overview on how facial characteristics are surgically managed in an interdisciplinary way based on experience, instrumentation, and modern technology to obtain an aesthetic facial appearance with harmonious facial proportions. The facial profile will be discussed within the context of facial aesthetics. Latest concepts for capturing facial morphology in high speed and impressive detail are presented for quantitative analysis of even subtle changes, aging effects, or facial expressions. In addition, the perception of facial profiles is evaluated based on eye tracking technology.}, language = {en} } @article{ZachowHegeDeuflhard2005, author = {Zachow, Stefan and Hege, Hans-Christian and Deuflhard, Peter}, title = {Maxillofacial surgery planning with 3D soft tissue prediction - modeling, planning, simulation}, series = {2. Int. Conf. on Advanced Digital Technology in Head and Neck Reconstruction, Abstract 33}, journal = {2. Int. Conf. on Advanced Digital Technology in Head and Neck Reconstruction, Abstract 33}, address = {Banff, Alberta, CA}, pages = {64}, year = {2005}, language = {en} } @inproceedings{ZachowHegeDeuflhard2004, author = {Zachow, Stefan and Hege, Hans-Christian and Deuflhard, Peter}, title = {Computergest{\"u}tzte Operationsplanung in der Gesichtschirurgie}, series = {Proc. VDE Kongress 2004 - Innovationen f{\"u}r Menschen, Band 2, Fachtagungsberichte DGBMT - GMM - GMA}, booktitle = {Proc. VDE Kongress 2004 - Innovationen f{\"u}r Menschen, Band 2, Fachtagungsberichte DGBMT - GMM - GMA}, pages = {53 -- 58}, year = {2004}, language = {en} } @article{ZachowHegeDeuflhard2006, author = {Zachow, Stefan and Hege, Hans-Christian and Deuflhard, Peter}, title = {Computer assisted planning in cranio-maxillofacial surgery}, series = {Journal of Computing and Information Technology}, volume = {14(1)}, journal = {Journal of Computing and Information Technology}, pages = {53 -- 64}, year = {2006}, language = {en} } @incollection{ZachowHahnLange2010, author = {Zachow, Stefan and Hahn, Horst and Lange, Thomas}, title = {Computerassistierte Chirugieplanung}, series = {Computerassistierte Chirurgie}, booktitle = {Computerassistierte Chirurgie}, editor = {Schlag, Peter and Eulenstein, Sebastian and Lange, Thomas}, publisher = {Elsevier}, pages = {119 -- 149}, year = {2010}, language = {en} } @inproceedings{ZachowGladilinZeilhoferetal.2001, author = {Zachow, Stefan and Gladilin, Evgeny and Zeilhofer, Hans-Florian and Sader, Robert}, title = {Improved 3D Osteotomy Planning in Cranio-Maxillofacial Surgery}, series = {Proc. Medical Image Computing and Computer-Assisted Intervention (MICCAI 2001)}, booktitle = {Proc. Medical Image Computing and Computer-Assisted Intervention (MICCAI 2001)}, address = {Utrecht, The Netherlands}, doi = {10.1007/3-540-45468-3_57}, pages = {473 -- 481}, year = {2001}, language = {en} } @inproceedings{ZachowGladilinZeilhoferetal.2001, author = {Zachow, Stefan and Gladilin, Evgeny and Zeilhofer, Hans-Florian and Sader, Robert}, title = {3D Osteotomieplanung in der MKG-Chirurgie unter Ber{\"u}cksichtigung der r{\"a}umlichen Weichgewebeanordnung}, series = {Rechner- und sensorgest{\"u}tzte Chirurgie, GI Proc. zur SFB 414 Tagung}, booktitle = {Rechner- und sensorgest{\"u}tzte Chirurgie, GI Proc. zur SFB 414 Tagung}, address = {Heidelberg}, pages = {217 -- 226}, year = {2001}, language = {en} } @article{ZachowGladilinTrepczynskietal.2002, author = {Zachow, Stefan and Gladilin, Evgeny and Trepczynski, Adam and Sader, Robert and Zeilhofer, Hans-Florian}, title = {3D Osteotomy Planning in Cranio-Maxillofacial Surgery: Experiences and Results of Surgery Planning and Volumetric Finite-Element Soft Tissue Prediction in Three Clinical Cases}, series = {Computer Assisted Radiology and Surgery (CARS)}, journal = {Computer Assisted Radiology and Surgery (CARS)}, publisher = {Springer Verlag}, pages = {983 -- 987}, year = {2002}, language = {en} } @inproceedings{ZachowGladilinSaderetal.2003, author = {Zachow, Stefan and Gladilin, Evgeny and Sader, Robert and Zeilhofer, Hans-Florian}, title = {Draw \& Cut: Intuitive 3D Osteotomy Planning on Polygonal Bone Models}, series = {Computer Assisted Radiology and Surgery (CARS)}, booktitle = {Computer Assisted Radiology and Surgery (CARS)}, address = {London, UK}, doi = {10.1016/S0531-5131(03)00272-3}, pages = {362 -- 369}, year = {2003}, language = {en} } @inproceedings{ZachowGladilinHegeetal.2002, author = {Zachow, Stefan and Gladilin, Evgeny and Hege, Hans-Christian and Deuflhard, Peter}, title = {Towards Patient Specific, Anatomy Based Simulation of Facial Mimics for Surgical Nerve Rehabilitation}, series = {Computer Assisted Radiology and Surgery (CARS)}, booktitle = {Computer Assisted Radiology and Surgery (CARS)}, publisher = {Springer Verlag}, pages = {3 -- 6}, year = {2002}, language = {en} } @inproceedings{ZachowGladilinHegeetal.2000, author = {Zachow, Stefan and Gladilin, Evgeny and Hege, Hans-Christian and Deuflhard, Peter}, title = {Finite-Element Simulation of Soft Tissue Deformation}, series = {Computer Assisted Radiology and Surgey (CARS)}, booktitle = {Computer Assisted Radiology and Surgey (CARS)}, publisher = {Elsevier Science B.V.}, pages = {23 -- 28}, year = {2000}, language = {en} } @inproceedings{ZachowErdmannHegeetal.2004, author = {Zachow, Stefan and Erdmann, Bodo and Hege, Hans-Christian and Deuflhard, Peter}, title = {Advances in 3D osteotomy planning with 3D soft tissue prediction}, series = {Proc. 2nd International Symposium on Computer Aided Surgery around the Head, Abstract}, booktitle = {Proc. 2nd International Symposium on Computer Aided Surgery around the Head, Abstract}, address = {Bern}, pages = {31}, year = {2004}, language = {en} } @article{ZachowDeuflhard2008, author = {Zachow, Stefan and Deuflhard, Peter}, title = {Computergest{\"u}tzte Planung in der kraniofazialen Chirurgie}, series = {Face 01/08, Int. Mag. of Orofacial Esthetics}, journal = {Face 01/08, Int. Mag. of Orofacial Esthetics}, publisher = {Oemus Journale Leipzig}, pages = {43 -- 49}, year = {2008}, language = {en} } @phdthesis{Zachow, author = {Zachow, Stefan}, title = {Computergest{\"u}tzte 3D Osteotomieplanung in der Mund-Kiefer-Gesichtschirurgie unter Ber{\"u}cksichtigung der r{\"a}umlichen Weichgewebeanordnung}, isbn = {3899631986}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-10432}, abstract = {In der Arbeit wird die computergest{\"u}tzte Planung von chirurgisch gesetzten Knochenfrakturen bzw. Knochenschnitten (sogenannten Osteotomien) an dreidimensionalen, computergrafischen Sch{\"a}delmodellen, sowie die Umpositionierung separierter kn{\"o}cherner Segmente im Kontext der rekonstruktiven MKG-Chirurgie behandelt. Durch die 3D Modellierung und Visualisierung anatomischer Strukturen, sowie der 3D Osteotomie- und Umstellungsplanung unter Einbeziehung der resultierenden Weichgewebedeformation wird den Chirurgen ein Werkzeug an die Hand gegeben, mit dem eine Therapieplanung am Computer durchgef{\"u}hrt und diese in Hinblick auf Funktion und {\"A}sthetik bewertet werden kann. Unterschiedliche Strategien k{\"o}nnen dabei erprobt und in ihrer Auswirkung erfasst werden. Dazu wird ein methodischer Ansatz vorgestellt, der zum einen die chirurgische Planung im Vergleich zu existierenden Ans{\"a}tzen deutlich verbessert und zum anderen eine robuste Weichgewebeprognose, durch den Einsatz geeigneter Planungsmodelle und eines physikalisch basierten Weichgewebemodells unter Nutzung numerischer L{\"o}sungsverfahren in die Planung integriert. Die Visualisierung der Planungsergebnisse erlaubt sowohl eine anschauliche und {\"u}berzeugende, pr{\"a}operative Patientenaufkl{\"a}rung, als auch die Demonstration m{\"o}glicher Vorgehensweisen und deren Auswirkungen f{\"u}r die chirurgische Ausbildung. Ferner erg{\"a}nzen die Planungsdaten die Falldokumentation und liefern einen Beitrag zur Qualit{\"a}tssicherung. Die Arbeit ist in sieben Kapitel gegliedert und wie folgt strukturiert: Zuerst wird die medizinische Aufgabenstellung bei der chirurgischen Rekonstruktion von Knochenfehlbildungen und -fehlstellungen in der kraniofazialen Chirurgie sowie die daraus resultierenden Anforderungen an die Therapieplanung beschrieben. Anschließend folgt ein umfassender {\"U}berblick {\"u}ber entsprechende Vorarbeiten zur computergest{\"u}tzten Planung knochenverlagernder Operationen und eine kritische Bestandsaufnahme der noch vorhandenen Defizite. Nach der Vorstellung des eigenen Planungsansatzes wird die Generierung individueller, qualitativ hochwertiger 3D Planungsmodelle aus tomografischen Bilddaten beschrieben, die den Anforderungen an eine intuitive, 3D Planung von Umstellungsosteotomien entsprechen und eine Simulation der daraus resultierenden Weichgewebedeformation mittels der Finite-Elemente Methode (FEM) erm{\"o}glichen. Die Methoden der 3D Schnittplanung an computergrafischen Modellen werden analysiert und eine 3D Osteotomieplanung an polygonalen Sch{\"a}delmodellen entwickelt, die es erm{\"o}glicht, intuitiv durch Definition von Schnittlinien am 3D Knochenmodell, eine den chirurgischen Anforderungen entsprechende Schnittplanung unter Ber{\"u}cksichtigung von Risikostrukturen durchzuf{\"u}hren. Separierte Knochensegmente lassen sich im Anschluss interaktiv umpositionieren und die resultierende Gesamtanordnung hinsichtlich einer funktionellen Rehabilitation bewerten. Aufgrund des in dieser Arbeit gew{\"a}hlten, physikalisch basierten Modellierungsansatzes kann unter Ber{\"u}cksichtigung des gesamten Weichgewebevolumens aus der Knochenverlagerung direkt die resultierende Gesichtsform berechnet werden. Dies wird anhand von 13 exemplarischen Fallstudien anschaulich demonstriert, wobei die Prognosequalit{\"a}t mittels postoperativer Fotografien und postoperativer CT-Daten {\"u}berpr{\"u}ft und belegt wird. Die Arbeit wird mit einem Ausblick auf erweiterte Modellierungsans{\"a}tze und einem Konzept f{\"u}r eine integrierte, klinisch einsetzbare Planungsumgebung abgeschlossen.}, language = {de} } @misc{Zachow1999, type = {Master Thesis}, author = {Zachow, Stefan}, title = {Design and Implementation of a planning system for episthetic surgery}, year = {1999}, language = {en} } @phdthesis{Zachow2005, author = {Zachow, Stefan}, title = {Computer assisted osteotomy planning in cranio-maxillofacial surgery under consideration of facial soft tissue changes}, year = {2005}, language = {en} } @article{Zachow, author = {Zachow, Stefan}, title = {Computational Planning in Facial Surgery}, series = {Facial Plastic Surgery}, volume = {31}, journal = {Facial Plastic Surgery}, number = {5}, doi = {10.1055/s-0035-1564717}, pages = {446 -- 462}, abstract = {This article reflects the research of the last two decades in computational planning for cranio-maxillofacial surgery. Model-guided and computer-assisted surgery planning has tremendously developed due to ever increasing computational capabilities. Simulators for education, planning, and training of surgery are often compared with flight simulators, where maneuvers are also trained to reduce a possible risk of failure. Meanwhile, digital patient models can be derived from medical image data with astonishing accuracy and thus can serve for model surgery to derive a surgical template model that represents the envisaged result. Computerized surgical planning approaches, however, are often still explorative, meaning that a surgeon tries to find a therapeutic concept based on his or her expertise using computational tools that are mimicking real procedures. Future perspectives of an improved computerized planning may be that surgical objectives will be generated algorithmically by employing mathematical modeling, simulation, and optimization techniques. Planning systems thus act as intelligent decision support systems. However, surgeons can still use the existing tools to vary the proposed approach, but they mainly focus on how to transfer objectives into reality. Such a development may result in a paradigm shift for future surgery planning.}, language = {en} } @misc{WilsonBuecherGreweetal., author = {Wilson, David and B{\"u}cher, Pia and Grewe, Carl Martin and Mocanu, Valentin and Anglin, Carolyn and Zachow, Stefan and Dunbar, Michael}, title = {Validation of Three Dimensional Models of the Distal Femur Created from Surgical Navigation Data}, series = {Orthopedic Research Society Annual Meeting}, journal = {Orthopedic Research Society Annual Meeting}, address = {Las Vegas, Nevada}, language = {en} } @misc{WilsonBuecherGreweetal., author = {Wilson, David and B{\"u}cher, Pia and Grewe, Carl Martin and Anglin, Carolyn and Zachow, Stefan and Michael, Dunbar}, title = {Validation of Three Dimensional Models of the Distal Femur Created from Surgical Navigation Point Cloud Data}, series = {15th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery (CAOS)}, journal = {15th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery (CAOS)}, language = {en} } @article{WilsonAnglinAmbellanetal., author = {Wilson, David and Anglin, Carolyn and Ambellan, Felix and Grewe, Carl Martin and Tack, Alexander and Lamecker, Hans and Dunbar, Michael and Zachow, Stefan}, title = {Validation of three-dimensional models of the distal femur created from surgical navigation point cloud data for intraoperative and postoperative analysis of total knee arthroplasty}, series = {International Journal of Computer Assisted Radiology and Surgery}, volume = {12}, journal = {International Journal of Computer Assisted Radiology and Surgery}, number = {12}, publisher = {Springer}, doi = {10.1007/s11548-017-1630-5}, pages = {2097 -- 2105}, abstract = {Purpose: Despite the success of total knee arthroplasty there continues to be a significant proportion of patients who are dissatisfied. One explanation may be a shape mismatch between pre and post-operative distal femurs. The purpose of this study was to investigate a method to match a statistical shape model (SSM) to intra-operatively acquired point cloud data from a surgical navigation system, and to validate it against the pre-operative magnetic resonance imaging (MRI) data from the same patients. Methods: A total of 10 patients who underwent navigated total knee arthroplasty also had an MRI scan less than 2 months pre-operatively. The standard surgical protocol was followed which included partial digitization of the distal femur. Two different methods were employed to fit the SSM to the digitized point cloud data, based on (1) Iterative Closest Points (ICP) and (2) Gaussian Mixture Models (GMM). The available MRI data were manually segmented and the reconstructed three-dimensional surfaces used as ground truth against which the statistical shape model fit was compared. Results: For both approaches, the difference between the statistical shape model-generated femur and the surface generated from MRI segmentation averaged less than 1.7 mm, with maximum errors occurring in less clinically important areas. Conclusion: The results demonstrated good correspondence with the distal femoral morphology even in cases of sparse data sets. Application of this technique will allow for measurement of mismatch between pre and post-operative femurs retrospectively on any case done using the surgical navigation system and could be integrated into the surgical navigation unit to provide real-time feedback.}, language = {en} } @article{WestermarkZachowEppley2005, author = {Westermark, Anders and Zachow, Stefan and Eppley, Barry}, title = {3D osteotomy planning in maxillofacial surgery, including 3D soft tissue prediction}, series = {Journal of Craniofacial Surgery}, volume = {16(1)}, journal = {Journal of Craniofacial Surgery}, pages = {100 -- 104}, year = {2005}, language = {en} } @article{WeiserZachowDeuflhard2010, author = {Weiser, Martin and Zachow, Stefan and Deuflhard, Peter}, title = {Craniofacial Surgery Planning Based on Virtual Patient Models}, series = {it - Information Technology}, volume = {52}, journal = {it - Information Technology}, number = {5}, publisher = {Oldenbourg Verlagsgruppe}, doi = {10.1524/itit.2010.0600}, pages = {258 -- 263}, year = {2010}, language = {en} } @misc{WeiserErdmannSchenkletal.2017, author = {Weiser, Martin and Erdmann, Bodo and Schenkl, Sebastian and Muggenthaler, Holger and Hubig, Michael and Mall, Gita and Zachow, Stefan}, title = {Uncertainty in Temperature-Based Determination of Time of Death}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-63818}, year = {2017}, abstract = {Temperature-based estimation of time of death (ToD) can be per- formed either with the help of simple phenomenological models of corpse cooling or with detailed mechanistic (thermodynamic) heat transfer mod- els. The latter are much more complex, but allow a higher accuracy of ToD estimation as in principle all relevant cooling mechanisms can be taken into account. The potentially higher accuracy depends on the accuracy of tissue and environmental parameters as well as on the geometric resolution. We in- vestigate the impact of parameter variations and geometry representation on the estimated ToD based on a highly detailed 3D corpse model, that has been segmented and geometrically reconstructed from a computed to- mography (CT) data set, differentiating various organs and tissue types. From that we identify the most crucial parameters to measure or estimate, and obtain a local uncertainty quantifcation for the ToD.}, language = {en} } @article{WeiserErdmannSchenkletal., author = {Weiser, Martin and Erdmann, Bodo and Schenkl, Sebastian and Muggenthaler, Holger and Hubig, Michael and Mall, Gita and Zachow, Stefan}, title = {Uncertainty in Temperature-Based Determination of Time of Death}, series = {Heat and Mass Transfer}, volume = {54}, journal = {Heat and Mass Transfer}, number = {9}, publisher = {Springer}, doi = {10.1007/s00231-018-2324-4}, pages = {2815 -- 2826}, abstract = {Temperature-based estimation of time of death (ToD) can be per- formed either with the help of simple phenomenological models of corpse cooling or with detailed mechanistic (thermodynamic) heat transfer mod- els. The latter are much more complex, but allow a higher accuracy of ToD estimation as in principle all relevant cooling mechanisms can be taken into account. The potentially higher accuracy depends on the accuracy of tissue and environmental parameters as well as on the geometric resolution. We in- vestigate the impact of parameter variations and geometry representation on the estimated ToD based on a highly detailed 3D corpse model, that has been segmented and geometrically reconstructed from a computed to- mography (CT) data set, differentiating various organs and tissue types.}, language = {en} } @article{WagendorfNahlesVachetal., author = {Wagendorf, Oliver and Nahles, Susanne and Vach, Kirstin and Kernen, Florian and Zachow, Stefan and Heiland, Max and Fl{\"u}gge, Tabea}, title = {The impact of teeth and dental restorations on gray value distribution in cone-beam computer tomography - a pilot study}, series = {International Journal of Implant Dentistry}, volume = {9}, journal = {International Journal of Implant Dentistry}, number = {27}, doi = {10.1186/s40729-023-00493-z}, abstract = {Purpose: To investigate the influence of teeth and dental restorations on the facial skeleton's gray value distributions in cone-beam computed tomography (CBCT). Methods: Gray value selection for the upper and lower jaw segmentation was performed in 40 patients. In total, CBCT data of 20 maxillae and 20 mandibles, ten partial edentulous and ten fully edentulous in each jaw, respectively, were evaluated using two different gray value selection procedures: manual lower threshold selection and automated lower threshold selection. Two sample t tests, linear regression models, linear mixed models, and Pearson's correlation coefficients were computed to evaluate the influence of teeth, dental restorations, and threshold selection procedures on gray value distributions. Results: Manual threshold selection resulted in significantly different gray values in the fully and partially edentulous mandible. (p = 0.015, difference 123). In automated threshold selection, only tendencies to different gray values in fully edentulous compared to partially edentulous jaws were observed (difference: 58-75). Significantly different gray values were evaluated for threshold selection approaches, independent of the dental situation of the analyzed jaw. No significant correlation between the number of teeth and gray values was assessed, but a trend towards higher gray values in patients with more teeth was noted. Conclusions: Standard gray values derived from CT imaging do not apply for threshold-based bone segmentation in CBCT. Teeth influence gray values and segmentation results. Inaccurate bone segmentation may result in ill-fitting surgical guides produced on CBCT data and misinterpreting bone density, which is crucial for selecting surgical protocols.}, language = {en} } @article{vonTycowiczAmbellanMukhopadhyayetal., author = {von Tycowicz, Christoph and Ambellan, Felix and Mukhopadhyay, Anirban and Zachow, Stefan}, title = {An Efficient Riemannian Statistical Shape Model using Differential Coordinates}, series = {Medical Image Analysis}, volume = {43}, journal = {Medical Image Analysis}, number = {1}, doi = {10.1016/j.media.2017.09.004}, pages = {1 -- 9}, abstract = {We propose a novel Riemannian framework for statistical analysis of shapes that is able to account for the nonlinearity in shape variation. By adopting a physical perspective, we introduce a differential representation that puts the local geometric variability into focus. We model these differential coordinates as elements of a Lie group thereby endowing our shape space with a non-Euclidean structure. A key advantage of our framework is that statistics in a manifold shape space becomes numerically tractable improving performance by several orders of magnitude over state-of-the-art. We show that our Riemannian model is well suited for the identification of intra-population variability as well as inter-population differences. In particular, we demonstrate the superiority of the proposed model in experiments on specificity and generalization ability. We further derive a statistical shape descriptor that outperforms the standard Euclidean approach in terms of shape-based classification of morphological disorders.}, language = {en} } @inproceedings{vonBergDworzakKlinderetal.2011, author = {von Berg, Jens and Dworzak, Jalda and Klinder, Tobias and Manke, Dirk and Lamecker, Hans and Zachow, Stefan and Lorenz, Cristian}, title = {Temporal Subtraction of Chest Radiographs Compensating Pose Differences}, series = {SPIE Medical Imaging}, booktitle = {SPIE Medical Imaging}, year = {2011}, language = {en} } @misc{TycowiczAmbellanMukhopadhyayetal., author = {Tycowicz, Christoph von and Ambellan, Felix and Mukhopadhyay, Anirban and Zachow, Stefan}, title = {A Riemannian Statistical Shape Model using Differential Coordinates}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-61175}, abstract = {We propose a novel Riemannian framework for statistical analysis of shapes that is able to account for the nonlinearity in shape variation. By adopting a physical perspective, we introduce a differential representation that puts the local geometric variability into focus. We model these differential coordinates as elements of a Lie group thereby endowing our shape space with a non-Euclidian structure. A key advantage of our framework is that statistics in a manifold shape space become numerically tractable improving performance by several orders of magnitude over state-of-the-art. We show that our Riemannian model is well suited for the identification of intra-population variability as well as inter-population differences. In particular, we demonstrate the superiority of the proposed model in experiments on specificity and generalization ability. We further derive a statistical shape descriptor that outperforms the standard Euclidian approach in terms of shape-based classification of morphological disorders.}, language = {en} } @article{TaylorPoepplauKoenigetal.2011, author = {Taylor, William R. and P{\"o}pplau, Berry M. and K{\"o}nig, Christian and Ehrig, Rainald and Zachow, Stefan and Duda, Georg and Heller, Markus O.}, title = {The medial-lateral force distribution in the ovine stifle joint during walking}, series = {Journal of Orthopaedic Research}, volume = {29}, journal = {Journal of Orthopaedic Research}, number = {4}, doi = {10.1002/jor.21254}, pages = {567 -- 571}, year = {2011}, language = {en} } @inproceedings{TackZachow, author = {Tack, Alexander and Zachow, Stefan}, title = {Accurate Automated Volumetry of Cartilage of the Knee using Convolutional Neural Networks: Data from the Osteoarthritis Initiative}, series = {IEEE 16th International Symposium on Biomedical Imaging (ISBI 2019)}, booktitle = {IEEE 16th International Symposium on Biomedical Imaging (ISBI 2019)}, doi = {10.1109/ISBI.2019.8759201}, pages = {40 -- 43}, abstract = {Volumetry of cartilage of the knee is needed for knee osteoarthritis (KOA) assessment. It is typically performed manually in a tedious and subjective process. We developed a method for an automated, segmentation-based quantification of cartilage volume by employing 3D Convolutional Neural Networks (CNNs). CNNs were trained in a supervised manner using magnetic resonance imaging data and cartilage volumetry readings performed by clinical experts for 1378 subjects provided by the Osteoarthritis Initiative. It was shown that 3D CNNs are able to achieve volume measures comparable to the magnitude of variation between expert readings and the real in vivo situation. In the future, accurate automated cartilage volumetry might support both, diagnosis of KOA as well as longitudinal analysis of KOA progression.}, language = {en} } @misc{TackZachow, author = {Tack, Alexander and Zachow, Stefan}, title = {Accurate Automated Volumetry of Cartilage of the Knee using Convolutional Neural Networks: Data from the Osteoarthritis Initiative}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-71439}, abstract = {Volumetry of the cartilage of the knee, as needed for the assessment of knee osteoarthritis (KOA), is typically performed in a tedious and subjective process. We present an automated segmentation-based method for the quantification of cartilage volume by employing 3D Convolutional Neural Networks (CNNs). CNNs were trained in a supervised manner using magnetic resonance imaging data as well as cartilage volumetry readings given by clinical experts for 1378 subjects. It was shown that 3D CNNs can be employed for cartilage volumetry with an accuracy similar to expert volumetry readings. In future, accurate automated cartilage volumetry might support both, diagnosis of KOA as well as assessment of KOA progression via longitudinal analysis.}, language = {en} } @misc{TackShestakovLuedkeetal., author = {Tack, Alexander and Shestakov, Alexey and L{\"u}dke, David and Zachow, Stefan}, title = {A deep multi-task learning method for detection of meniscal tears in MRI data from the Osteoarthritis Initiative database}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-84415}, abstract = {We present a novel and computationally efficient method for the detection of meniscal tears in Magnetic Resonance Imaging (MRI) data. Our method is based on a Convolutional Neural Network (CNN) that operates on a complete 3D MRI scan. Our approach detects the presence of meniscal tears in three anatomical sub-regions (anterior horn, meniscal body, posterior horn) for both the Medial Meniscus (MM) and the Lateral Meniscus (LM) individually. For optimal performance of our method, we investigate how to preprocess the MRI data or how to train the CNN such that only relevant information within a Region of Interest (RoI) of the data volume is taken into account for meniscal tear detection. We propose meniscal tear detection combined with a bounding box regressor in a multi-task deep learning framework to let the CNN implicitly consider the corresponding RoIs of the menisci. We evaluate the accuracy of our CNN-based meniscal tear detection approach on 2,399 Double Echo Steady-State (DESS) MRI scans from the Osteoarthritis Initiative database. In addition, to show that our method is capable of generalizing to other MRI sequences, we also adapt our model to Intermediate-Weighted Turbo Spin-Echo (IW TSE) MRI scans. To judge the quality of our approaches, Receiver Operating Characteristic (ROC) curves and Area Under the Curve (AUC) values are evaluated for both MRI sequences. For the detection of tears in DESS MRI, our method reaches AUC values of 0.94, 0.93, 0.93 (anterior horn, body, posterior horn) in MM and 0.96, 0.94, 0.91 in LM. For the detection of tears in IW TSE MRI data, our method yields AUC values of 0.84, 0.88, 0.86 in MM and 0.95, 0.91, 0.90 in LM. In conclusion, the presented method achieves high accuracy for detecting meniscal tears in both DESS and IW TSE MRI data. Furthermore, our method can be easily trained and applied to other MRI sequences.}, language = {en} } @article{TackShestakovLuedkeetal., author = {Tack, Alexander and Shestakov, Alexey and L{\"u}dke, David and Zachow, Stefan}, title = {A deep multi-task learning method for detection of meniscal tears in MRI data from the Osteoarthritis Initiative database}, series = {Frontiers in Bioengineering and Biotechnology, section Biomechanics}, journal = {Frontiers in Bioengineering and Biotechnology, section Biomechanics}, doi = {10.3389/fbioe.2021.747217}, pages = {28 -- 41}, abstract = {We present a novel and computationally efficient method for the detection of meniscal tears in Magnetic Resonance Imaging (MRI) data. Our method is based on a Convolutional Neural Network (CNN) that operates on a complete 3D MRI scan. Our approach detects the presence of meniscal tears in three anatomical sub-regions (anterior horn, meniscal body, posterior horn) for both the Medial Meniscus (MM) and the Lateral Meniscus (LM) individually. For optimal performance of our method, we investigate how to preprocess the MRI data or how to train the CNN such that only relevant information within a Region of Interest (RoI) of the data volume is taken into account for meniscal tear detection. We propose meniscal tear detection combined with a bounding box regressor in a multi-task deep learning framework to let the CNN implicitly consider the corresponding RoIs of the menisci. We evaluate the accuracy of our CNN-based meniscal tear detection approach on 2,399 Double Echo Steady-State (DESS) MRI scans from the Osteoarthritis Initiative database. In addition, to show that our method is capable of generalizing to other MRI sequences, we also adapt our model to Intermediate-Weighted Turbo Spin-Echo (IW TSE) MRI scans. To judge the quality of our approaches, Receiver Operating Characteristic (ROC) curves and Area Under the Curve (AUC) values are evaluated for both MRI sequences. For the detection of tears in DESS MRI, our method reaches AUC values of 0.94, 0.93, 0.93 (anterior horn, body, posterior horn) in MM and 0.96, 0.94, 0.91 in LM. For the detection of tears in IW TSE MRI data, our method yields AUC values of 0.84, 0.88, 0.86 in MM and 0.95, 0.91, 0.90 in LM. In conclusion, the presented method achieves high accuracy for detecting meniscal tears in both DESS and IW TSE MRI data. Furthermore, our method can be easily trained and applied to other MRI sequences.}, language = {en} } @article{TackPreimZachow, author = {Tack, Alexander and Preim, Bernhard and Zachow, Stefan}, title = {Fully automated Assessment of Knee Alignment from Full-Leg X-Rays employing a "YOLOv4 And Resnet Landmark regression Algorithm" (YARLA): Data from the Osteoarthritis Initiative}, series = {Computer Methods and Programs in Biomedicine}, volume = {205}, journal = {Computer Methods and Programs in Biomedicine}, number = {106080}, doi = {https://doi.org/10.1016/j.cmpb.2021.106080}, abstract = {We present a method for the quantification of knee alignment from full-leg X-Rays. A state-of-the-art object detector, YOLOv4, was trained to locate regions of interests (ROIs) in full-leg X-Ray images for the hip joint, the knee, and the ankle. Residual neural networks (ResNets) were trained to regress landmark coordinates for each ROI.Based on the detected landmarks the knee alignment, i.e., the hip-knee-ankle (HKA) angle, was computed. The accuracy of landmark detection was evaluated by a comparison to manually placed landmarks for 360 legs in 180 X-Rays. The accuracy of HKA angle computations was assessed on the basis of 2,943 X-Rays. Results of YARLA were compared to the results of two independent image reading studies(Cooke; Duryea) both publicly accessible via the Osteoarthritis Initiative. The agreement was evaluated using Spearman's Rho, and weighted kappa as well as regarding the correspondence of the class assignment (varus/neutral/valgus). The average difference between YARLA and manually placed landmarks was less than 2.0+- 1.5 mm for all structures (hip, knee, ankle). The average mismatch between HKA angle determinations of Cooke and Duryea was 0.09 +- 0.63°; YARLA resulted in a mismatch of 0.10 +- 0.74° compared to Cooke and of 0.18 +- 0.64° compared to Duryea. Cooke and Duryea agreed almost perfectly with respect to a weighted kappa value of 0.86, and showed an excellent reliability as measured by a Spearman's Rho value of 0.99. Similar values were achieved by YARLA, i.e., a weighted kappa value of0.83 and 0.87 and a Spearman's Rho value of 0.98 and 0.99 to Cooke and Duryea,respectively. Cooke and Duryea agreed in 92\% of all class assignments and YARLA did so in 90\% against Cooke and 92\% against Duryea. In conclusion, YARLA achieved results comparable to those of human experts and thus provides a basis for an automated assessment of knee alignment in full-leg X-Rays.}, language = {de} } @article{TackMukhopadhyayZachow, author = {Tack, Alexander and Mukhopadhyay, Anirban and Zachow, Stefan}, title = {Knee Menisci Segmentation using Convolutional Neural Networks: Data from the Osteoarthritis Initiative}, series = {Osteoarthritis and Cartilage}, volume = {26}, journal = {Osteoarthritis and Cartilage}, number = {5}, doi = {10.1016/j.joca.2018.02.907}, pages = {680 -- 688}, abstract = {Abstract: Objective: To present a novel method for automated segmentation of knee menisci from MRIs. To evaluate quantitative meniscal biomarkers for osteoarthritis (OA) estimated thereof. Method: A segmentation method employing convolutional neural networks in combination with statistical shape models was developed. Accuracy was evaluated on 88 manual segmentations. Meniscal volume, tibial coverage, and meniscal extrusion were computed and tested for differences between groups of OA, joint space narrowing (JSN), and WOMAC pain. Correlation between computed meniscal extrusion and MOAKS experts' readings was evaluated for 600 subjects. Suitability of biomarkers for predicting incident radiographic OA from baseline to 24 months was tested on a group of 552 patients (184 incident OA, 386 controls) by performing conditional logistic regression. Results: Segmentation accuracy measured as Dice Similarity Coefficient was 83.8\% for medial menisci (MM) and 88.9\% for lateral menisci (LM) at baseline, and 83.1\% and 88.3\% at 12-month follow-up. Medial tibial coverage was significantly lower for arthritic cases compared to non-arthritic ones. Medial meniscal extrusion was significantly higher for arthritic knees. A moderate correlation between automatically computed medial meniscal extrusion and experts' readings was found (ρ=0.44). Mean medial meniscal extrusion was significantly greater for incident OA cases compared to controls (1.16±0.93 mm vs. 0.83±0.92 mm; p<0.05). Conclusion: Especially for medial menisci an excellent segmentation accuracy was achieved. Our meniscal biomarkers were validated by comparison to experts' readings as well as analysis of differences w.r.t groups of OA, JSN, and WOMAC pain. It was confirmed that medial meniscal extrusion is a predictor for incident OA.}, language = {en} } @misc{TackMukhopadhyayZachow, author = {Tack, Alexander and Mukhopadhyay, Anirban and Zachow, Stefan}, title = {Knee Menisci Segmentation using Convolutional Neural Networks: Data from the Osteoarthritis Initiative (Supplementary Material)}, doi = {10.12752/4.TMZ.1.0}, abstract = {Abstract: Objective: To present a novel method for automated segmentation of knee menisci from MRIs. To evaluate quantitative meniscal biomarkers for osteoarthritis (OA) estimated thereof. Method: A segmentation method employing convolutional neural networks in combination with statistical shape models was developed. Accuracy was evaluated on 88 manual segmentations. Meniscal volume, tibial coverage, and meniscal extrusion were computed and tested for differences between groups of OA, joint space narrowing (JSN), and WOMAC pain. Correlation between computed meniscal extrusion and MOAKS experts' readings was evaluated for 600 subjects. Suitability of biomarkers for predicting incident radiographic OA from baseline to 24 months was tested on a group of 552 patients (184 incident OA, 386 controls) by performing conditional logistic regression. Results: Segmentation accuracy measured as Dice Similarity Coefficient was 83.8\% for medial menisci (MM) and 88.9\% for lateral menisci (LM) at baseline, and 83.1\% and 88.3\% at 12-month follow-up. Medial tibial coverage was significantly lower for arthritic cases compared to non-arthritic ones. Medial meniscal extrusion was significantly higher for arthritic knees. A moderate correlation between automatically computed medial meniscal extrusion and experts' readings was found (ρ=0.44). Mean medial meniscal extrusion was significantly greater for incident OA cases compared to controls (1.16±0.93 mm vs. 0.83±0.92 mm; p<0.05). Conclusion: Especially for medial menisci an excellent segmentation accuracy was achieved. Our meniscal biomarkers were validated by comparison to experts' readings as well as analysis of differences w.r.t groups of OA, JSN, and WOMAC pain. It was confirmed that medial meniscal extrusion is a predictor for incident OA.}, language = {en} } @misc{TackMukhopadhyayZachow, author = {Tack, Alexander and Mukhopadhyay, Anirban and Zachow, Stefan}, title = {Knee Menisci Segmentation using Convolutional Neural Networks: Data from the Osteoarthritis Initiative}, volume = {26}, number = {5}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-68038}, pages = {680 -- 688}, abstract = {Abstract: Objective: To present a novel method for automated segmentation of knee menisci from MRIs. To evaluate quantitative meniscal biomarkers for osteoarthritis (OA) estimated thereof. Method: A segmentation method employing convolutional neural networks in combination with statistical shape models was developed. Accuracy was evaluated on 88 manual segmentations. Meniscal volume, tibial coverage, and meniscal extrusion were computed and tested for differences between groups of OA, joint space narrowing (JSN), and WOMAC pain. Correlation between computed meniscal extrusion and MOAKS experts' readings was evaluated for 600 subjects. Suitability of biomarkers for predicting incident radiographic OA from baseline to 24 months was tested on a group of 552 patients (184 incident OA, 386 controls) by performing conditional logistic regression. Results: Segmentation accuracy measured as Dice Similarity Coefficient was 83.8\% for medial menisci (MM) and 88.9\% for lateral menisci (LM) at baseline, and 83.1\% and 88.3\% at 12-month follow-up. Medial tibial coverage was significantly lower for arthritic cases compared to non-arthritic ones. Medial meniscal extrusion was significantly higher for arthritic knees. A moderate correlation between automatically computed medial meniscal extrusion and experts' readings was found (ρ=0.44). Mean medial meniscal extrusion was significantly greater for incident OA cases compared to controls (1.16±0.93 mm vs. 0.83±0.92 mm; p<0.05). Conclusion: Especially for medial menisci an excellent segmentation accuracy was achieved. Our meniscal biomarkers were validated by comparison to experts' readings as well as analysis of differences w.r.t groups of OA, JSN, and WOMAC pain. It was confirmed that medial meniscal extrusion is a predictor for incident OA.}, language = {en} } @misc{TackAmbellanZachow2021, author = {Tack, Alexander and Ambellan, Felix and Zachow, Stefan}, title = {Towards novel osteoarthritis biomarkers: Multi-criteria evaluation of 46,996 segmented knee MRI data from the Osteoarthritis Initiative (Supplementary Material)}, series = {PLOS One}, volume = {16}, journal = {PLOS One}, number = {10}, doi = {10.12752/8328}, year = {2021}, abstract = {Convolutional neural networks (CNNs) are the state-of-the-art for automated assessment of knee osteoarthritis (KOA) from medical image data. However, these methods lack interpretability, mainly focus on image texture, and cannot completely grasp the analyzed anatomies' shapes. In this study we assess the informative value of quantitative features derived from segmentations in order to assess their potential as an alternative or extension to CNN-based approaches regarding multiple aspects of KOA A fully automated method is employed to segment six anatomical structures around the knee (femoral and tibial bones, femoral and tibial cartilages, and both menisci) in 46,996 MRI scans. Based on these segmentations, quantitative features are computed, i.e., measurements such as cartilage volume, meniscal extrusion and tibial coverage, as well as geometric features based on a statistical shape encoding of the anatomies. The feature quality is assessed by investigating their association to the Kellgren-Lawrence grade (KLG), joint space narrowing (JSN), incident KOA, and total knee replacement (TKR). Using gold standard labels from the Osteoarthritis Initiative database the balanced accuracy (BA), the area under the Receiver Operating Characteristic curve (AUC), and weighted kappa statistics are evaluated. Features based on shape encodings of femur, tibia, and menisci plus the performed measurements showed most potential as KOA biomarkers. Differentiation between healthy and severely arthritic knees yielded BAs of up to 99\%, 84\% were achieved for diagnosis of early KOA. Substantial agreement with weighted kappa values of 0.73, 0.73, and 0.79 were achieved for classification of the grade of medial JSN, lateral JSN, and KLG, respectively. The AUC was 0.60 and 0.75 for prediction of incident KOA and TKR within 5 years, respectively. Quantitative features from automated segmentations yield excellent results for KLG and JSN classification and show potential for incident KOA and TKR prediction. The validity of these features as KOA biomarkers should be further evaluated, especially as extensions of CNN-based approaches. To foster such developments we make all segmentations publicly available together with this publication.}, language = {en} } @article{TackAmbellanZachow, author = {Tack, Alexander and Ambellan, Felix and Zachow, Stefan}, title = {Towards novel osteoarthritis biomarkers: Multi-criteria evaluation of 46,996 segmented knee MRI data from the Osteoarthritis Initiative}, series = {PLOS One}, volume = {16}, journal = {PLOS One}, number = {10}, doi = {10.1371/journal.pone.0258855}, abstract = {Convolutional neural networks (CNNs) are the state-of-the-art for automated assessment of knee osteoarthritis (KOA) from medical image data. However, these methods lack interpretability, mainly focus on image texture, and cannot completely grasp the analyzed anatomies' shapes. In this study we assess the informative value of quantitative features derived from segmentations in order to assess their potential as an alternative or extension to CNN-based approaches regarding multiple aspects of KOA. Six anatomical structures around the knee (femoral and tibial bones, femoral and tibial cartilages, and both menisci) are segmented in 46,996 MRI scans. Based on these segmentations, quantitative features are computed, i.e., measurements such as cartilage volume, meniscal extrusion and tibial coverage, as well as geometric features based on a statistical shape encoding of the anatomies. The feature quality is assessed by investigating their association to the Kellgren-Lawrence grade (KLG), joint space narrowing (JSN), incident KOA, and total knee replacement (TKR). Using gold standard labels from the Osteoarthritis Initiative database the balanced accuracy (BA), the area under the Receiver Operating Characteristic curve (AUC), and weighted kappa statistics are evaluated. Features based on shape encodings of femur, tibia, and menisci plus the performed measurements showed most potential as KOA biomarkers. Differentiation between non-arthritic and severely arthritic knees yielded BAs of up to 99\%, 84\% were achieved for diagnosis of early KOA. Weighted kappa values of 0.73, 0.72, and 0.78 were achieved for classification of the grade of medial JSN, lateral JSN, and KLG, respectively. The AUC was 0.61 and 0.76 for prediction of incident KOA and TKR within one year, respectively. Quantitative features from automated segmentations provide novel biomarkers for KLG and JSN classification and show potential for incident KOA and TKR prediction. The validity of these features should be further evaluated, especially as extensions of CNN- based approaches. To foster such developments we make all segmentations publicly available together with this publication.}, language = {en} } @article{SteinmannBartschZachowetal.2008, author = {Steinmann, Alexander and Bartsch, Peter and Zachow, Stefan and Hildebrandt, Thomas}, title = {Breathing Easily: Simulation of airflow in human noses can become a useful rhinosurgery planning tool}, series = {ANSYS Advantage}, volume = {Vol. II, No. 1}, journal = {ANSYS Advantage}, pages = {30 -- 31}, year = {2008}, language = {en} } @inproceedings{StefanGulshanSigrunetal.2012, author = {Stefan, Saevarsson and Gulshan, Sharma and Sigrun, Montgomery and Karen, Ho and Ramm, Heiko and Lieck, Robert and Zachow, Stefan and Hutchison, Carol and Jason, Werle and Carolyn, Anglin}, title = {Kinematic Comparison Between Gender Specific and Traditional Femoral Implants}, series = {67th Canadian Orthopaedic Association (COA) Annual Meeting}, booktitle = {67th Canadian Orthopaedic Association (COA) Annual Meeting}, year = {2012}, language = {en} } @inproceedings{StallingSeebassZachow1999, author = {Stalling, Detlev and Seebaß, Martin and Zachow, Stefan}, title = {Mehrschichtige Oberfl{\"a}chenmodelle zur computergest{\"u}tzten Planung in der Chirurgie}, series = {Bildverarbeitung f{\"u}r die Medizin 1999 - Algorithmen, Anwendungen}, booktitle = {Bildverarbeitung f{\"u}r die Medizin 1999 - Algorithmen, Anwendungen}, publisher = {Springer-Verlag, Berlin}, pages = {203 -- 207}, year = {1999}, language = {en} } @misc{StallingSeebassZachow, author = {Stalling, Detlev and Seebass, Martin and Zachow, Stefan}, title = {Mehrschichtige Oberfl{\"a}chenmodelle zur computergest{\"u}tzten Planung in der Chirurgie}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-5661}, number = {TR-98-05}, abstract = {Polygonale Sch{\"a}delmodelle bilden ein wichtiges Hilfsmittel f{\"u}r computergest{\"u}tzte Planungen im Bereich der plastischen Chirurgie. Wir beschreiben, wie derartige Modelle automatisch aus hochaufgel{\"o}sten CT-Datens{\"a}tzen erzeugt werden k{\"o}nnen. Durch einen lokal steuerbaren Simplifizierungsalgorithmus werden die Modelle so weit vereinfacht, daß auch auf kleineren Graphikcomputern interaktives Arbeiten m{\"o}glich wird. Die Verwendung eines speziellen Transparenzmodells erm{\"o}glicht den ungehinderten Blick auf die bei der Planung relevanten Knochenstrukturen und l{\"a}ßt den Benutzer zugleich die Kopfumrisse des Patienten erkennen.}, language = {de} } @misc{SKGBSetal.2011, author = {SK, Saevarsson and GB, Sharma and S, Montgomery and KCT, Ho and Ramm, Heiko and Lieck, Robert and Zachow, Stefan and C, Anglin}, title = {Kinematic Comparison Between Gender Specific and Traditional Femoral Implants}, series = {Proceedings of the 11th Alberta Biomedical Engineering (BME) Conference (Poster)}, journal = {Proceedings of the 11th Alberta Biomedical Engineering (BME) Conference (Poster)}, pages = {80}, year = {2011}, language = {en} } @inproceedings{SiqueiraRodriguesRiehmZachowetal., author = {Siqueira Rodrigues, Lucas and Riehm, Felix and Zachow, Stefan and Israel, Johann Habakuk}, title = {VoxSculpt: An Open-Source Voxel Library for Tomographic Volume Sculpting in Virtual Reality}, series = {2023 9th International Conference on Virtual Reality (ICVR), Xianyang, China, 2023}, booktitle = {2023 9th International Conference on Virtual Reality (ICVR), Xianyang, China, 2023}, doi = {10.1109/ICVR57957.2023.10169420}, pages = {515 -- 523}, abstract = {Manual processing of tomographic data volumes, such as interactive image segmentation in medicine or paleontology, is considered a time-consuming and cumbersome endeavor. Immersive volume sculpting stands as a potential solution to improve its efficiency and intuitiveness. However, current open-source software solutions do not yield the required performance and functionalities. We address this issue by contributing a novel open-source game engine voxel library that supports real-time immersive volume sculpting. Our design leverages GPU instancing, parallel computing, and a chunk-based data structure to optimize collision detection and rendering. We have implemented features that enable fast voxel interaction and improve precision. Our benchmark evaluation indicates that our implementation offers a significant improvement over the state-of-the-art and can render and modify millions of visible voxels while maintaining stable performance for real-time interaction in virtual reality.}, language = {en} } @inproceedings{SiqueiraRodriguesNyakaturaZachowetal., author = {Siqueira Rodrigues, Lucas and Nyakatura, John and Zachow, Stefan and Israel, Johann Habakuk}, title = {An Immersive Virtual Paleontology Application}, series = {13th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2022}, booktitle = {13th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2022}, doi = {10.1007/978-3-031-06249-0}, pages = {478 -- 481}, abstract = {Virtual paleontology studies digital fossils through data analysis and visualization systems. The discipline is growing in relevance for the evident advantages of non-destructive imaging techniques over traditional paleontological methods, and it has made significant advancements during the last few decades. However, virtual paleontology still faces a number of technological challenges, amongst which are interaction shortcomings of image segmentation applications. Whereas automated segmentation methods are seldom applicable to fossil datasets, manual exploration of these specimens is extremely time-consuming as it impractically delves into three-dimensional data through two-dimensional visualization and interaction means. This paper presents an application that employs virtual reality and haptics to virtual paleontology in order to evolve its interaction paradigms and address some of its limitations. We provide a brief overview of the challenges faced by virtual paleontology practitioners, a description of our immersive virtual paleontology prototype, and the results of a heuristic evaluation of our design.}, language = {en} } @inproceedings{SiqueiraRodriguesNyakaturaZachowetal., author = {Siqueira Rodrigues, Lucas and Nyakatura, John and Zachow, Stefan and Israel, Johann Habakuk}, title = {Design Challenges and Opportunities of Fossil Preparation Tools and Methods}, series = {Proceedings of the 20th International Conference on Culture and Computer Science: Code and Materiality}, booktitle = {Proceedings of the 20th International Conference on Culture and Computer Science: Code and Materiality}, publisher = {Association for Computing Machinery}, address = {New York, NY, USA}, doi = {10.1145/3623462.3623470}, abstract = {Fossil preparation is the activity of processing paleontological specimens for research and exhibition purposes. In addition to traditional mechanical extraction of fossils, preparation presently comprises non-destructive digital methods that are part of a relatively new field, namely virtual paleontology. Despite significant technological advances, both traditional and digital preparation remain cumbersome and time-consuming endeavors. However, this field has received scarce attention from a human-computer interaction perspective. The present study aims to elucidate the state-of-the-art for paleontological fossil preparation in order to determine its main challenges and start a conversation regarding opportunities for creating novel designs that tackle the field's current issues. We conducted a qualitative study involving both technical preparators and virtual paleontologists. The study was divided into two parts: First, we assembled technical preparators and paleontology researchers in a focus group session to discuss their workflows, obtain a preliminary understanding of their issues, and ideate solutions based on their counterparts' workflows. Next, we conducted a series of contextual inquiries involving direct observation and semi-structured in-depth interviews. We transcribed our recordings and examined the data through theoretical and inductive thematic analysis, clustering emerging themes and applying concepts from human-computer interaction and related fields. Our findings report on challenges faced by traditional and digital fossil preparators and potential opportunities to improve their tools and workflows. We contribute with a novel analysis of fossil preparation from an HCI perspective.}, language = {en} } @misc{SharmaSaevarssonAmirietal.2012, author = {Sharma, Gulshan and Saevarsson, Stefan and Amiri, Shahram and Montgomery, Sigrun and Ramm, Heiko and Lichti, Derek and Zachow, Stefan and Anglin, Carolyn}, title = {Sequential-Biplane Radiography for Measuring Pre and Post Total Knee Arthroplasty Kinematics}, series = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, journal = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, address = {San Francisco, CA}, year = {2012}, language = {en} } @misc{SharmaHoSaevarssonetal.2012, author = {Sharma, Gulshan and Ho, Karen and Saevarsson, Stefan and Ramm, Heiko and Lieck, Robert and Zachow, Stefan and Anglin, Carolyn}, title = {Knee Pose and Geometry Pre- and Post-Total Knee Arthroplasty Using Computed Tomography}, series = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, journal = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, address = {San Francisco, CA}, year = {2012}, language = {en} } @article{SekuboyinaHusseiniBayatetal., author = {Sekuboyina, Anjany and Husseini, Malek E. and Bayat, Amirhossein and L{\"o}ffler, Maximilian and Liebl, Hans and Li, Hongwei and Tetteh, Giles and Kukačka, Jan and Payer, Christian and Štern, Darko and Urschler, Martin and Chen, Maodong and Cheng, Dalong and Lessmann, Nikolas and Hu, Yujin and Wang, Tianfu and Yang, Dong and Xu, Daguang and Ambellan, Felix and Amiranashvili, Tamaz and Ehlke, Moritz and Lamecker, Hans and Lehnert, Sebastian and Lirio, Marilia and de Olaguer, Nicol{\´a}s P{\´e}rez and Ramm, Heiko and Sahu, Manish and Tack, Alexander and Zachow, Stefan and Jiang, Tao and Ma, Xinjun and Angerman, Christoph and Wang, Xin and Brown, Kevin and Kirszenberg, Alexandre and Puybareau, {\´E}lodie and Chen, Di and Bai, Yiwei and Rapazzo, Brandon H. and Yeah, Timyoas and Zhang, Amber and Xu, Shangliang and Hou, Feng and He, Zhiqiang and Zeng, Chan and Xiangshang, Zheng and Liming, Xu and Netherton, Tucker J. and Mumme, Raymond P. and Court, Laurence E. and Huang, Zixun and He, Chenhang and Wang, Li-Wen and Ling, Sai Ho and Huynh, L{\^e} Duy and Boutry, Nicolas and Jakubicek, Roman and Chmelik, Jiri and Mulay, Supriti and Sivaprakasam, Mohanasankar and Paetzold, Johannes C. and Shit, Suprosanna and Ezhov, Ivan and Wiestler, Benedikt and Glocker, Ben and Valentinitsch, Alexander and Rempfler, Markus and Menze, Bj{\"o}rn H. and Kirschke, Jan S.}, title = {VerSe: A Vertebrae labelling and segmentation benchmark for multi-detector CT images}, series = {Medical Image Analysis}, volume = {73}, journal = {Medical Image Analysis}, doi = {10.1016/j.media.2021.102166}, abstract = {Vertebral labelling and segmentation are two fundamental tasks in an automated spine processing pipeline. Reliable and accurate processing of spine images is expected to benefit clinical decision support systems for diagnosis, surgery planning, and population-based analysis of spine and bone health. However, designing automated algorithms for spine processing is challenging predominantly due to considerable variations in anatomy and acquisition protocols and due to a severe shortage of publicly available data. Addressing these limitations, the Large Scale Vertebrae Segmentation Challenge (VerSe) was organised in conjunction with the International Conference on Medical Image Computing and Computer Assisted Intervention (MICCAI) in 2019 and 2020, with a call for algorithms tackling the labelling and segmentation of vertebrae. Two datasets containing a total of 374 multi-detector CT scans from 355 patients were prepared and 4505 vertebrae have individually been annotated at voxel level by a human-machine hybrid algorithm (https://osf.io/nqjyw/, https://osf.io/t98fz/). A total of 25 algorithms were benchmarked on these datasets. In this work, we present the results of this evaluation and further investigate the performance variation at the vertebra level, scan level, and different fields of view. We also evaluate the generalisability of the approaches to an implicit domain shift in data by evaluating the top-performing algorithms of one challenge iteration on data from the other iteration. The principal takeaway from VerSe: the performance of an algorithm in labelling and segmenting a spine scan hinges on its ability to correctly identify vertebrae in cases of rare anatomical variations. The VerSe content and code can be accessed at: https://github.com/anjany/verse.}, language = {en} } @article{SekuboyinaBayatHusseinietal., author = {Sekuboyina, Anjany and Bayat, Amirhossein and Husseini, Malek E. and L{\"o}ffler, Maximilian and Li, Hongwei and Tetteh, Giles and Kukačka, Jan and Payer, Christian and Štern, Darko and Urschler, Martin and Chen, Maodong and Cheng, Dalong and Lessmann, Nikolas and Hu, Yujin and Wang, Tianfu and Yang, Dong and Xu, Daguang and Ambellan, Felix and Amiranashvili, Tamaz and Ehlke, Moritz and Lamecker, Hans and Lehnert, Sebastian and Lirio, Marilia and de Olaguer, Nicol{\´a}s P{\´e}rez and Ramm, Heiko and Sahu, Manish and Tack, Alexander and Zachow, Stefan and Jiang, Tao and Ma, Xinjun and Angerman, Christoph and Wang, Xin and Wei, Qingyue and Brown, Kevin and Wolf, Matthias and Kirszenberg, Alexandre and Puybareau, {\´E}lodie and Valentinitsch, Alexander and Rempfler, Markus and Menze, Bj{\"o}rn H. and Kirschke, Jan S.}, title = {VerSe: A Vertebrae Labelling and Segmentation Benchmark for Multi-detector CT Images}, series = {arXiv}, journal = {arXiv}, language = {en} } @inproceedings{SeimLameckerZachow2008, author = {Seim, Heiko and Lamecker, Hans and Zachow, Stefan}, title = {Segmentation of Bony Structures with Ligament Attachment Sites}, series = {Bildverarbeitung f{\"u}r die Medizin 2008}, booktitle = {Bildverarbeitung f{\"u}r die Medizin 2008}, publisher = {Springer}, doi = {10.1007/978-3-540-78640-5_42}, pages = {207 -- 211}, year = {2008}, language = {en} } @inproceedings{SeimKainmuellerLameckeretal.2009, author = {Seim, Heiko and Kainm{\"u}ller, Dagmar and Lamecker, Hans and Zachow, Stefan}, title = {A System for Unsupervised Extraction of Orthopaedic Parameters from CT Data}, series = {GI Workshop Softwareassistenten - Computerunterst{\"u}tzung f{\"u}r die medizinische Diagnose und Therapieplanung}, booktitle = {GI Workshop Softwareassistenten - Computerunterst{\"u}tzung f{\"u}r die medizinische Diagnose und Therapieplanung}, address = {L{\"u}beck, Germany}, pages = {1328 -- 1337}, year = {2009}, language = {en} } @inproceedings{SeimKainmuellerLameckeretal.2010, author = {Seim, Heiko and Kainm{\"u}ller, Dagmar and Lamecker, Hans and Bindernagel, Matthias and Malinowski, Jana and Zachow, Stefan}, title = {Model-based Auto-Segmentation of Knee Bones and Cartilage in MRI Data}, series = {Proc. MICCAI Workshop Medical Image Analysis for the Clinic}, booktitle = {Proc. MICCAI Workshop Medical Image Analysis for the Clinic}, editor = {v. Ginneken, B.}, pages = {215 -- 223}, year = {2010}, language = {en} } @inproceedings{SeimKainmuellerKussetal.2008, author = {Seim, Heiko and Kainm{\"u}ller, Dagmar and Kuss, Anja and Lamecker, Hans and Zachow, Stefan and Menzel, Randolf and Rybak, Juergen}, title = {Model-based autosegmentation of the central brain of the honeybee, Apis mellifera, using active statistical shape models}, series = {Proc. 1st INCF Congress of Neuroinformatics: Databasing and Modeling the Brain}, booktitle = {Proc. 1st INCF Congress of Neuroinformatics: Databasing and Modeling the Brain}, doi = {10.3389/conf.neuro.11.2008.01.064}, year = {2008}, language = {en} } @inproceedings{SeimKainmuellerHelleretal.2009, author = {Seim, Heiko and Kainm{\"u}ller, Dagmar and Heller, Markus O. and Zachow, Stefan and Hege, Hans-Christian}, title = {Automatic Extraction of Anatomical Landmarks from Medical Image Data: An Evaluation of Different Methods}, series = {Proc. of IEEE Int. Symposium on Biomedical Imaging (ISBI)}, booktitle = {Proc. of IEEE Int. Symposium on Biomedical Imaging (ISBI)}, address = {Boston, MA, USA}, pages = {538 -- 541}, year = {2009}, language = {en} } @inproceedings{SeimKainmuellerHelleretal.2008, author = {Seim, Heiko and Kainm{\"u}ller, Dagmar and Heller, Markus O. and Lamecker, Hans and Zachow, Stefan and Hege, Hans-Christian}, title = {Automatic Segmentation of the Pelvic Bones from CT Data Based on a Statistical Shape Model}, series = {Eurographics Workshop on Visual Computing for Biomedicine (VCBM)}, booktitle = {Eurographics Workshop on Visual Computing for Biomedicine (VCBM)}, address = {Delft, Netherlands}, pages = {93 -- 100}, year = {2008}, language = {en} } @article{SchenklMuggenthalerHubigetal.2017, author = {Schenkl, Sebastian and Muggenthaler, Holger and Hubig, Michael and Erdmann, Bodo and Weiser, Martin and Zachow, Stefan and Heinrich, Andreas and G{\"u}ttler, Felix Victor and Teichgr{\"a}ber, Ulf and Mall, Gita}, title = {Automatic CT-based finite element model generation for temperature-based death time estimation: feasibility study and sensitivity analysis}, series = {International Journal of Legal Medicine}, volume = {131}, journal = {International Journal of Legal Medicine}, number = {3}, doi = {doi:10.1007/s00414-016-1523-0}, pages = {699 -- 712}, year = {2017}, abstract = {Temperature based death time estimation is based either on simple phenomenological models of corpse cooling or on detailed physical heat transfer models. The latter are much more complex, but allow a higher accuracy of death time estimation as in principle all relevant cooling mechanisms can be taken into account. Here, a complete work flow for finite element based cooling simulation models is presented. The following steps are demonstrated on CT-phantoms: • CT-scan • Segmentation of the CT images for thermodynamically relevant features of individual geometries • Conversion of the segmentation result into a Finite Element (FE) simulation model • Computation of the model cooling curve • Calculation of the cooling time For the first time in FE-based cooling time estimation the steps from the CT image over segmentation to FE model generation are semi-automatically performed. The cooling time calculation results are compared to cooling measurements performed on the phantoms under controlled conditions. In this context, the method is validated using different CTphantoms. Some of the CT phantoms thermodynamic material parameters had to be experimentally determined via independent experiments. Moreover the impact of geometry and material parameter uncertainties on the estimated cooling time is investigated by a sensitivity analysis.}, language = {en} } @article{SahuSzengelMukhopadhyayetal.2020, author = {Sahu, Manish and Szengel, Angelika and Mukhopadhyay, Anirban and Zachow, Stefan}, title = {Surgical phase recognition by learning phase transitions}, series = {Current Directions in Biomedical Engineering (CDBME)}, volume = {6}, journal = {Current Directions in Biomedical Engineering (CDBME)}, number = {1}, publisher = {De Gruyter}, doi = {https://doi.org/10.1515/cdbme-2020-0037}, pages = {20200037}, year = {2020}, abstract = {Automatic recognition of surgical phases is an important component for developing an intra-operative context-aware system. Prior work in this area focuses on recognizing short-term tool usage patterns within surgical phases. However, the difference between intra- and inter-phase tool usage patterns has not been investigated for automatic phase recognition. We developed a Recurrent Neural Network (RNN), in particular a state-preserving Long Short Term Memory (LSTM) architecture to utilize the long-term evolution of tool usage within complete surgical procedures. For fully automatic tool presence detection from surgical video frames, a Convolutional Neural Network (CNN) based architecture namely ZIBNet is employed. Our proposed approach outperformed EndoNet by 8.1\% on overall precision for phase detection tasks and 12.5\% on meanAP for tool recognition tasks.}, language = {en} } @misc{SahuSzengelMukhopadhyayetal., author = {Sahu, Manish and Szengel, Angelika and Mukhopadhyay, Anirban and Zachow, Stefan}, title = {Analyzing laparoscopic cholecystectomy with deep learning: automatic detection of surgical tools and phases}, series = {28th International Congress of the European Association for Endoscopic Surgery (EAES)}, journal = {28th International Congress of the European Association for Endoscopic Surgery (EAES)}, abstract = {Motivation: The ever-rising volume of patients, high maintenance cost of operating rooms and time consuming analysis of surgical skills are fundamental problems that hamper the practical training of the next generation of surgeons. The hospitals prefer to keep the surgeons busy in real operations over training young surgeons for obvious economic reasons. One fundamental need in surgical training is the reduction of the time needed by the senior surgeon to review the endoscopic procedures performed by the young surgeon while minimizing the subjective bias in evaluation. The unprecedented performance of deep learning ushers the new age of data-driven automatic analysis of surgical skills. Method: Deep learning is capable of efficiently analyzing thousands of hours of laparoscopic video footage to provide an objective assessment of surgical skills. However, the traditional end-to-end setting of deep learning (video in, skill assessment out) is not explainable. Our strategy is to utilize the surgical process modeling framework to divide the surgical process into understandable components. This provides the opportunity to employ deep learning for superior yet automatic detection and evaluation of several aspects of laparoscopic cholecystectomy such as surgical tool and phase detection. We employ ZIBNet for the detection of surgical tool presence. ZIBNet employs pre-processing based on tool usage imbalance, a transfer learned 50-layer residual network (ResNet-50) and temporal smoothing. To encode the temporal evolution of tool usage (over the entire video sequence) that relates to the surgical phases, Long Short Term Memory (LSTM) units are employed with long-term dependency. Dataset: We used CHOLEC 80 dataset that consists of 80 videos of laparoscopic cholecystectomy performed by 13 surgeons, divided equally for training and testing. In these videos, up to three different tools (among 7 types of tools) can be present in a frame. Results: The mean average precision of the detection of all tools is 93.5 ranging between 86.8 and 99.3, a significant improvement (p <0.01) over the previous state-of-the-art. We observed that less frequent tools like Scissors, Irrigator, Specimen Bag etc. are more related to phase transitions. The overall precision (recall) of the detection of all surgical phases is 79.6 (81.3). Conclusion: While this is not the end goal for surgical skill analysis, the development of such a technological platform is essential toward a data-driven objective understanding of surgical skills. In future, we plan to investigate surgeon-in-the-loop analysis and feedback for surgical skill analysis.}, language = {en} } @inproceedings{SahuStroemsdoerferMukhopadhyayetal., author = {Sahu, Manish and Str{\"o}msd{\"o}rfer, Ronja and Mukhopadhyay, Anirban and Zachow, Stefan}, title = {Endo-Sim2Real: Consistency learning-based domain adaptation for instrument segmentation}, series = {Proc. Medical Image Computing and Computer Assisted Intervention (MICCAI), Part III}, volume = {12263}, booktitle = {Proc. Medical Image Computing and Computer Assisted Intervention (MICCAI), Part III}, publisher = {Springer Nature}, doi = {https://doi.org/10.1007/978-3-030-59716-0_75}, abstract = {Surgical tool segmentation in endoscopic videos is an important component of computer assisted interventions systems. Recent success of image-based solutions using fully-supervised deep learning approaches can be attributed to the collection of big labeled datasets. However, the annotation of a big dataset of real videos can be prohibitively expensive and time consuming. Computer simulations could alleviate the manual labeling problem, however, models trained on simulated data do not generalize to real data. This work proposes a consistency-based framework for joint learning of simulated and real (unlabeled) endoscopic data to bridge this performance generalization issue. Empirical results on two data sets (15 videos of the Cholec80 and EndoVis'15 dataset) highlight the effectiveness of the proposed Endo-Sim2Real method for instrument segmentation. We compare the segmentation of the proposed approach with state-of-the-art solutions and show that our method improves segmentation both in terms of quality and quantity.}, language = {en} } @article{SahuMukhopadhyayZachow, author = {Sahu, Manish and Mukhopadhyay, Anirban and Zachow, Stefan}, title = {Simulation-to-Real domain adaptation with teacher-student learning for endoscopic instrument segmentation}, series = {International Journal of Computer Assisted Radiology and Surgery}, volume = {16}, journal = {International Journal of Computer Assisted Radiology and Surgery}, publisher = {Springer Nature}, doi = {10.1007/s11548-021-02383-4}, pages = {849 -- 859}, abstract = {Purpose Segmentation of surgical instruments in endoscopic video streams is essential for automated surgical scene understanding and process modeling. However, relying on fully supervised deep learning for this task is challenging because manual annotation occupies valuable time of the clinical experts. Methods We introduce a teacher-student learning approach that learns jointly from annotated simulation data and unlabeled real data to tackle the challenges in simulation-to-real unsupervised domain adaptation for endoscopic image segmentation. Results Empirical results on three datasets highlight the effectiveness of the proposed framework over current approaches for the endoscopic instrument segmentation task. Additionally, we provide analysis of major factors affecting the performance on all datasets to highlight the strengths and failure modes of our approach. Conclusions We show that our proposed approach can successfully exploit the unlabeled real endoscopic video frames and improve generalization performance over pure simulation-based training and the previous state-of-the-art. This takes us one step closer to effective segmentation of surgical instrument in the annotation scarce setting.}, language = {en} } @article{SahuMukhopadhyaySzengeletal., author = {Sahu, Manish and Mukhopadhyay, Anirban and Szengel, Angelika and Zachow, Stefan}, title = {Addressing multi-label imbalance problem of Surgical Tool Detection using CNN}, series = {International Journal of Computer Assisted Radiology and Surgery}, volume = {12}, journal = {International Journal of Computer Assisted Radiology and Surgery}, number = {6}, publisher = {Springer}, doi = {10.1007/s11548-017-1565-x}, pages = {1013 -- 1020}, abstract = {Purpose: A fully automated surgical tool detection framework is proposed for endoscopic video streams. State-of-the-art surgical tool detection methods rely on supervised one-vs-all or multi-class classification techniques, completely ignoring the co-occurrence relationship of the tools and the associated class imbalance. Methods: In this paper, we formulate tool detection as a multi-label classification task where tool co-occurrences are treated as separate classes. In addition, imbalance on tool co-occurrences is analyzed and stratification techniques are employed to address the imbalance during Convolutional Neural Network (CNN) training. Moreover, temporal smoothing is introduced as an online post-processing step to enhance run time prediction. Results: Quantitative analysis is performed on the M2CAI16 tool detection dataset to highlight the importance of stratification, temporal smoothing and the overall framework for tool detection. Conclusion: The analysis on tool imbalance, backed by the empirical results indicates the need and superiority of the proposed framework over state-of-the-art techniques.}, language = {en} } @misc{SahuDillMukhopadyayetal., author = {Sahu, Manish and Dill, Sabrina and Mukhopadyay, Anirban and Zachow, Stefan}, title = {Surgical Tool Presence Detection for Cataract Procedures}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-69110}, abstract = {This article outlines the submission to the CATARACTS challenge for automatic tool presence detection [1]. Our approach for this multi-label classification problem comprises labelset-based sampling, a CNN architecture and temporal smothing as described in [3], which we call ZIB-Res-TS.}, language = {en} } @article{SaevarssonSharmaRammetal.2013, author = {Saevarsson, Stefan and Sharma, Gulshan and Ramm, Heiko and Lieck, Robert and Hutchison, Carol and Werle, Jason and Montgomery, Sigrun and Romeo, Carolina and Zachow, Stefan and Anglin, Carolyn}, title = {Kinematic Differences Between Gender Specific And Traditional Knee Implants}, series = {The Journal of Arthroplasty}, volume = {28}, journal = {The Journal of Arthroplasty}, number = {9}, doi = {10.1016/j.arth.2013.01.021}, pages = {1543 -- 1550}, year = {2013}, language = {en} } @article{SaevarssonSharmaAmirietal.2012, author = {Saevarsson, Stefan and Sharma, Gulshan and Amiri, Shahram and Montgomery, Sigrun and Ramm, Heiko and Lichti, Derek and Lieck, Robert and Zachow, Stefan and Anglin, Carolyn}, title = {Radiological method for measuring patellofemoral tracking and tibiofemoral kinematics before and after total knee replacement}, series = {Bone and Joint Research}, volume = {1}, journal = {Bone and Joint Research}, number = {10}, doi = {10.1302/2046-3758.110.2000117}, pages = {263 -- 271}, year = {2012}, language = {en} } @article{RybakKussLameckeretal.2010, author = {Rybak, J{\"u}rgen and Kuß, Anja and Lamecker, Hans and Zachow, Stefan and Hege, Hans-Christian and Lienhard, Matthias and Singer, Jochen and Neubert, Kerstin and Menzel, Randolf}, title = {The Digital Bee Brain: Integrating and Managing Neurons in a Common 3D Reference System}, series = {Front. Syst. Neurosci.}, volume = {4}, journal = {Front. Syst. Neurosci.}, number = {30}, doi = {10.3389/fnsys.2010.00030}, year = {2010}, language = {en} } @incollection{RammZachow2012, author = {Ramm, Heiko and Zachow, Stefan}, title = {Computergest{\"u}tzte Planung f{\"u}r die individuelle Implantatversorgung}, series = {Health Academy}, volume = {16}, booktitle = {Health Academy}, editor = {Niederlag, Wolfgang and Lemke, Heinz and Peitgen, Heinz-Otto and Lehrach, Hans}, pages = {145 -- 158}, year = {2012}, language = {de} } @inproceedings{RammVictoriaMorilloTodtetal.2013, author = {Ramm, Heiko and Victoria Morillo, Oscar Salvador and Todt, Ingo and Schirmacher, Hartmut and Ernst, Arneborg and Zachow, Stefan and Lamecker, Hans}, title = {Visual Support for Positioning Hearing Implants}, series = {Proceedings of the 12th annual meeting of the CURAC society}, booktitle = {Proceedings of the 12th annual meeting of the CURAC society}, editor = {Freysinger, Wolfgang}, pages = {116 -- 120}, year = {2013}, language = {en} } @misc{RammMorilloVictoriaTodtetal., author = {Ramm, Heiko and Morillo Victoria, Oscar Salvador and Todt, Ingo and Schirmacher, Hartmut and Ernst, Arneborg and Zachow, Stefan and Lamecker, Hans}, title = {Visual Support for Positioning Hearing Implants}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-42495}, abstract = {We present a software planning tool that provides intuitive visual feedback for finding suitable positions of hearing implants in the human temporal bone. After an automatic reconstruction of the temporal bone anatomy the tool pre-positions the implant and allows the user to adjust its position interactively with simple 2D dragging and rotation operations on the bone's surface. During this procedure, visual elements like warning labels on the implant or color encoded bone density information on the bone geometry provide guidance for the determination of a suitable fit.}, language = {en} } @article{RammKahntZachow2012, author = {Ramm, Heiko and Kahnt, Max and Zachow, Stefan}, title = {Patientenspezifische Simulationsmodelle f{\"u}r die funktionelle Analyse von k{\"u}nstlichem Gelenkersatz}, series = {Computer Aided Medical Engineering (CaMe)}, volume = {3}, journal = {Computer Aided Medical Engineering (CaMe)}, number = {2}, pages = {30 -- 36}, year = {2012}, language = {de} } @article{PimentelSzengelEhlkeetal., author = {Pimentel, Pedro and Szengel, Angelika and Ehlke, Moritz and Lamecker, Hans and Zachow, Stefan and Estacio, Laura and Doenitz, Christian and Ramm, Heiko}, title = {Automated Virtual Reconstruction of Large Skull Defects using Statistical Shape Models and Generative Adversarial Networks}, series = {Towards the Automatization of Cranial Implant Design in Cranioplasty}, volume = {12439}, journal = {Towards the Automatization of Cranial Implant Design in Cranioplasty}, editor = {Li, Jianning and Egger, Jan}, edition = {1}, publisher = {Springer International Publishing}, doi = {10.1007/978-3-030-64327-0_3}, pages = {16 -- 27}, abstract = {We present an automated method for extrapolating missing regions in label data of the skull in an anatomically plausible manner. The ultimate goal is to design patient-speci� c cranial implants for correcting large, arbitrarily shaped defects of the skull that can, for example, result from trauma of the head. Our approach utilizes a 3D statistical shape model (SSM) of the skull and a 2D generative adversarial network (GAN) that is trained in an unsupervised fashion from samples of healthy patients alone. By � tting the SSM to given input labels containing the skull defect, a First approximation of the healthy state of the patient is obtained. The GAN is then applied to further correct and smooth the output of the SSM in an anatomically plausible manner. Finally, the defect region is extracted using morphological operations and subtraction between the extrapolated healthy state of the patient and the defective input labels. The method is trained and evaluated based on data from the MICCAI 2020 AutoImplant challenge. It produces state-of-the art results on regularly shaped cut-outs that were present in the training and testing data of the challenge. Furthermore, due to unsupervised nature of the approach, the method generalizes well to previously unseen defects of varying shapes that were only present in the hidden test dataset.}, language = {en} } @article{PichtLeCalveTomaselloetal., author = {Picht, Thomas and Le Calve, Maxime and Tomasello, Rosario and Fekonja, Lucius and Gholami, Mohammad Fardin and Bruhn, Matthias and Zwick, Carola and Rabe, J{\"u}rgen P. and M{\"u}ller-Birn, Claudia and Vajkoczy, Peter and Sauer, Igor M. and Zachow, Stefan and Nyakatura, John A. and Ribault, Patricia and Pulverm{\"u}ller, Friedemann}, title = {A note on neurosurgical resection and why we need to rethink cutting}, series = {Neurosurgery}, volume = {89}, journal = {Neurosurgery}, number = {5}, doi = {10.1093/neuros/nyab326}, pages = {289 -- 291}, language = {en} } @article{OeltzeJaffraMeuschkeNeugebaueretal., author = {Oeltze-Jaffra, Steffen and Meuschke, Monique and Neugebauer, Mathias and Saalfeld, Sylvia and Lawonn, Kai and Janiga, Gabor and Hege, Hans-Christian and Zachow, Stefan and Preim, Bernhard}, title = {Generation and Visual Exploration of Medical Flow Data: Survey, Research Trends, and Future Challenges}, series = {Computer Graphics Forum}, volume = {38}, journal = {Computer Graphics Forum}, number = {1}, publisher = {Wiley}, doi = {10.1111/cgf.13394}, pages = {87 -- 125}, abstract = {Simulations and measurements of blood and air flow inside the human circulatory and respiratory system play an increasingly important role in personalized medicine for prevention, diagnosis, and treatment of diseases. This survey focuses on three main application areas. (1) Computational Fluid Dynamics (CFD) simulations of blood flow in cerebral aneurysms assist in predicting the outcome of this pathologic process and of therapeutic interventions. (2) CFD simulations of nasal airflow allow for investigating the effects of obstructions and deformities and provide therapy decision support. (3) 4D Phase-Contrast (4D PC) Magnetic Resonance Imaging (MRI) of aortic hemodynamics supports the diagnosis of various vascular and valve pathologies as well as their treatment. An investigation of the complex and often dynamic simulation and measurement data requires the coupling of sophisticated visualization, interaction, and data analysis techniques. In this paper, we survey the large body of work that has been conducted within this realm. We extend previous surveys by incorporating nasal airflow, addressing the joint investigation of blood flow and vessel wall properties, and providing a more fine-granular taxonomy of the existing techniques. From the survey, we extract major research trends and identify open problems and future challenges. The survey is intended for researchers interested in medical flow but also more general, in the combined visualization of physiology and anatomy, the extraction of features from flow field data and feature-based visualization, the visual comparison of different simulation results, and the interactive visual analysis of the flow field and derived characteristics.}, language = {en} } @inproceedings{NkenkeZachowHaeusler2005, author = {Nkenke, Emeka and Zachow, Stefan and H{\"a}usler, Gerd}, title = {Fusion von optischen 3D- und CT-Daten des Gebisses zur Metallartefaktkorrektur vor computerassistierter Planung MKG-chirurgischer Eingriffe}, series = {Symposium der Arbeitsgemeinschaf f{\"u}r Kieferchirurgie}, booktitle = {Symposium der Arbeitsgemeinschaf f{\"u}r Kieferchirurgie}, address = {Bad Homburg v.d.H}, year = {2005}, language = {en} } @article{NkenkeZachowBenzetal.2004, author = {Nkenke, Emeka and Zachow, Stefan and Benz, Michaela and Maier, Tobias and Veit, Klaus and Kramer, Manuel and Benz, St. and H{\"a}usler, Gerd and Neukam, Friedrich and Lell, Michael}, title = {Fusion of computed tomography data and optical 3D images of the dentition for streak artefact correction in the simulation of orthognathic surgery}, series = {Journal of Dento-Maxillofacial Radiology}, volume = {33}, journal = {Journal of Dento-Maxillofacial Radiology}, doi = {10.1259/dmfr/27071199}, pages = {226 -- 232}, year = {2004}, language = {en} } @inproceedings{NkenkeHaeuslerNeukametal.2005, author = {Nkenke, Emeka and H{\"a}usler, Gerd and Neukam, Friedrich and Zachow, Stefan}, title = {Streak artifact correction of CT data by optical 3D imaging in the simulation of orthognathic surgery}, series = {Computer Assisted Radiology and Surgery (CARS)}, booktitle = {Computer Assisted Radiology and Surgery (CARS)}, address = {Berlin Germany}, doi = {doi:10.1016/j.ics.2005.03.278}, year = {2005}, language = {en} } @inproceedings{NguyenLameckerKainmuelleretal.2012, author = {Nguyen, The Duy and Lamecker, Hans and Kainm{\"u}ller, Dagmar and Zachow, Stefan}, title = {Automatic Detection and Classification of Teeth in CT Data}, series = {Proc. Medical Image Computing and Computer Assisted Intervention (MICCAI)}, volume = {7510}, booktitle = {Proc. Medical Image Computing and Computer Assisted Intervention (MICCAI)}, editor = {Ayache, Nicholas and Delingette, Herv{\´e} and Golland, Polina and Mori, Kensaku}, pages = {609 -- 616}, year = {2012}, language = {en} } @article{NguyenKainmuellerLameckeretal.2012, author = {Nguyen, The Duy and Kainm{\"u}ller, Dagmar and Lamecker, Hans and Zachow, Stefan}, title = {Automatic bone and tooth detection for CT-based dental implant planning}, series = {Int. J. Computer Assisted Radiology and Surgery}, volume = {7, Supplement 1}, journal = {Int. J. Computer Assisted Radiology and Surgery}, number = {1}, publisher = {Springer}, pages = {293 -- 294}, year = {2012}, language = {en} }