@misc{MuellerKuhlmannVigerske2017, author = {M{\"u}ller, Benjamin and Kuhlmann, Renke and Vigerske, Stefan}, title = {On the performance of NLP solvers within global MINLP solvers}, issn = {1438-0064}, doi = {10.1007/978-3-319-89920-6_84}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-64504}, year = {2017}, abstract = {Solving mixed-integer nonlinear programs (MINLPs) to global optimality efficiently requires fast solvers for continuous sub-problems. These appear in, e.g., primal heuristics, convex relaxations, and bound tightening methods. Two of the best performing algorithms for these sub-problems are Sequential Quadratic Programming (SQP) and Interior Point Methods. In this paper we study the impact of different SQP and Interior Point implementations on important MINLP solver components that solve a sequence of similar NLPs. We use the constraint integer programming framework SCIP for our computational studies.}, language = {en} } @misc{BleyGleixnerKochetal.2009, author = {Bley, Andreas and Gleixner, Ambros and Koch, Thorsten and Vigerske, Stefan}, title = {Comparing MIQCP solvers to a specialised algorithm for mine production scheduling}, organization = {ZIB}, issn = {1438-0064}, doi = {10.1007/978-3-642-25707-0}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-11507}, number = {09-32}, year = {2009}, abstract = {In this paper we investigate the performance of several out-of-the box solvers for mixed-integer quadratically constrained programmes (MIQCPs) on an open pit mine production scheduling problem with mixing constraints. We compare the solvers BARON, Couenne, SBB, and SCIP to a problem-specific algorithm on two different MIQCP formulations. The computational results presented show that general-purpose solvers with no particular knowledge of problem structure are able to nearly match the performance of a hand-crafted algorithm.}, language = {en} } @misc{ShinanoVigerske2025, author = {Shinano, Yuji and Vigerske, Stefan}, title = {Smoothie: Mixing the strongest MIP solvers to solve hard MIP instances on supercomputers - Phase I development}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-101906}, year = {2025}, abstract = {Mixed-Integer Linear Programming (MIP) is applicable to such a wide range of real-world decision problems that the competition for the best code to solve such problems has lead to tremendous progress over the last decades. While current solvers can solve some of the problems that seemed completely out-of-reach just 10 years ago, there are always relevant MIP problems that currently cannot be solved. With the Smoothie solver we intend to solve extremely hard MIP problems by building on the many years that went into the development of several state-of-the-art MIP solvers and by utilizing some of the largest computing resources available. The high-level task parallelization framework UG (Ubiquity Generator) is used and extended by Smoothie to build a solver that uses large-scale parallelization to distribute the solution of a single MIP on a shared- or distributed-memory computing infrastructure, thereby employing several established MIP solvers simultaneously. For the first development phase, which is the topic of this report, both FICO Xpress and Gurobi are used in concurrent mode on a single machine, while information on incumbent solutions and explored branch-and-bound subtrees is exchanged. A dynamic restarting mechanism ensures that solver configurations are selected that promise most suitable for the MIP to be solved. We report on initial findings using this early version of Smoothie on unsolved problems from MIPLIB 2017.}, language = {en} } @misc{BestuzhevaGleixnerVigerske2021, author = {Bestuzheva, Ksenia and Gleixner, Ambros and Vigerske, Stefan}, title = {A Computational Study of Perspective Cuts}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-81821}, year = {2021}, abstract = {The benefits of cutting planes based on the perspective function are well known for many specific classes of mixed-integer nonlinear programs with on/off structures. However, we are not aware of any empirical studies that evaluate their applicability and computational impact over large, heterogeneous test sets in general-purpose solvers. This paper provides a detailed computational study of perspective cuts within a linear programming based branch-and-cut solver for general mixed-integer nonlinear programs. Within this study, we extend the applicability of perspective cuts from convex to nonconvex nonlinearities. This generalization is achieved by applying a perspective strengthening to valid linear inequalities which separate solutions of linear relaxations. The resulting method can be applied to any constraint where all variables appearing in nonlinear terms are semi-continuous and depend on at least one common indicator variable. Our computational experiments show that adding perspective cuts for convex constraints yields a consistent improvement of performance, and adding perspective cuts for nonconvex constraints reduces branch-and-bound tree sizes and strengthens the root node relaxation, but has no significant impact on the overall mean time.}, language = {en} } @misc{GamrathFischerGallyetal.2016, author = {Gamrath, Gerald and Fischer, Tobias and Gally, Tristan and Gleixner, Ambros and Hendel, Gregor and Koch, Thorsten and Maher, Stephen J. and Miltenberger, Matthias and M{\"u}ller, Benjamin and Pfetsch, Marc and Puchert, Christian and Rehfeldt, Daniel and Schenker, Sebastian and Schwarz, Robert and Serrano, Felipe and Shinano, Yuji and Vigerske, Stefan and Weninger, Dieter and Winkler, Michael and Witt, Jonas T. and Witzig, Jakob}, title = {The SCIP Optimization Suite 3.2}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-57675}, year = {2016}, abstract = {The SCIP Optimization Suite is a software toolbox for generating and solving various classes of mathematical optimization problems. Its major components are the modeling language ZIMPL, the linear programming solver SoPlex, the constraint integer programming framework and mixed-integer linear and nonlinear programming solver SCIP, the UG framework for parallelization of branch-and-bound-based solvers, and the generic branch-cut-and-price solver GCG. It has been used in many applications from both academia and industry and is one of the leading non-commercial solvers. This paper highlights the new features of version 3.2 of the SCIP Optimization Suite. Version 3.2 was released in July 2015. This release comes with new presolving steps, primal heuristics, and branching rules within SCIP. In addition, version 3.2 includes a reoptimization feature and improved handling of quadratic constraints and special ordered sets. SoPlex can now solve LPs exactly over the rational number and performance improvements have been achieved by exploiting sparsity in more situations. UG has been tested successfully on 80,000 cores. A major new feature of UG is the functionality to parallelize a customized SCIP solver. GCG has been enhanced with a new separator, new primal heuristics, and improved column management. Finally, new and improved extensions of SCIP are presented, namely solvers for multi-criteria optimization, Steiner tree problems, and mixed-integer semidefinite programs.}, language = {en} } @misc{BallersteinMichaelsVigerske2013, author = {Ballerstein, Martin and Michaels, Dennis and Vigerske, Stefan}, title = {Linear Underestimators for bivariate functions with a fixed convexity behavior}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-17641}, year = {2013}, abstract = {This is a technical report for the SCIP constraint handler cons_bivariate. We describe a cut-generation algorithm for a class of bivariate twice continuously differentiable functions with fixed convexity behavior over a box. Computational results comparing our cut-generation algorithms with state-of-the-art global optimization software on a series of randomly generated test instances are reported and discussed.}, language = {en} } @misc{GleixnerHeldHuangetal.2012, author = {Gleixner, Ambros and Held, Harald and Huang, Wei and Vigerske, Stefan}, title = {Towards globally optimal operation of water supply networks}, issn = {1438-0064}, doi = {10.3934/naco.2012.2.695}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-15603}, year = {2012}, abstract = {This paper is concerned with optimal operation of pressurized water supply networks at a fixed point in time. We use a mixed-integer nonlinear programming (MINLP) model incorporating both the nonlinear physical laws and the discrete decisions such as switching pumps on and off. We demonstrate that for instances from our industry partner, these stationary models can be solved to ε-global optimality within small running times using problem-specific presolving and state-of-the-art MINLP algorithms. In our modeling, we emphasize the importance of distinguishing between what we call real and imaginary flow, i.e., taking into account that the law of Darcy-Weisbach correlates pressure difference and flow along a pipe if and only if water is available at the high pressure end of a pipe. Our modeling solution extends to the dynamic operative planning problem.}, language = {en} } @misc{PfetschFuegenschuhGeissleretal.2012, author = {Pfetsch, Marc and F{\"u}genschuh, Armin and Geißler, Bj{\"o}rn and Geißler, Nina and Gollmer, Ralf and Hiller, Benjamin and Humpola, Jesco and Koch, Thorsten and Lehmann, Thomas and Martin, Alexander and Morsi, Antonio and R{\"o}vekamp, Jessica and Schewe, Lars and Schmidt, Martin and Schultz, R{\"u}diger and Schwarz, Robert and Schweiger, Jonas and Stangl, Claudia and Steinbach, Marc and Vigerske, Stefan and Willert, Bernhard}, title = {Validation of Nominations in Gas Network Optimization: Models, Methods, and Solutions}, issn = {1438-0064}, doi = {10.1080/10556788.2014.888426}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-16531}, year = {2012}, abstract = {In this article we investigate methods to solve a fundamental task in gas transportation, namely the validation of nomination problem: Given a gas transmission network consisting of passive pipelines and active, controllable elements and given an amount of gas at every entry and exit point of the network, find operational settings for all active elements such that there exists a network state meeting all physical, technical, and legal constraints. We describe a two-stage approach to solve the resulting complex and numerically difficult mixed-integer non-convex nonlinear feasibility problem. The first phase consists of four distinct algorithms facilitating mixed-integer linear, mixed-integer nonlinear, reduced nonlinear, and complementarity constrained methods to compute possible settings for the discrete decisions. The second phase employs a precise continuous nonlinear programming model of the gas network. Using this setup, we are able to compute high quality solutions to real-world industrial instances whose size is significantly larger than networks that have appeared in the literature previously.}, language = {en} } @misc{BestuzhevaBesanconChenetal.2021, author = {Bestuzheva, Ksenia and Besan{\c{c}}on, Mathieu and Chen, Wei-Kun and Chmiela, Antonia and Donkiewicz, Tim and van Doornmalen, Jasper and Eifler, Leon and Gaul, Oliver and Gamrath, Gerald and Gleixner, Ambros and Gottwald, Leona and Graczyk, Christoph and Halbig, Katrin and Hoen, Alexander and Hojny, Christopher and van der Hulst, Rolf and Koch, Thorsten and L{\"u}bbecke, Marco and Maher, Stephen J. and Matter, Frederic and M{\"u}hmer, Erik and M{\"u}ller, Benjamin and Pfetsch, Marc E. and Rehfeldt, Daniel and Schlein, Steffan and Schl{\"o}sser, Franziska and Serrano, Felipe and Shinano, Yuji and Sofranac, Boro and Turner, Mark and Vigerske, Stefan and Wegscheider, Fabian and Wellner, Philipp and Weninger, Dieter and Witzig, Jakob}, title = {The SCIP Optimization Suite 8.0}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-85309}, year = {2021}, abstract = {The SCIP Optimization Suite provides a collection of software packages for mathematical optimization centered around the constraint integer programming framework SCIP. This paper discusses enhancements and extensions contained in version 8.0 of the SCIP Optimization Suite. Major updates in SCIP include improvements in symmetry handling and decomposition algorithms, new cutting planes, a new plugin type for cut selection, and a complete rework of the way nonlinear constraints are handled. Additionally, SCIP 8.0 now supports interfaces for Julia as well as Matlab. Further, UG now includes a unified framework to parallelize all solvers, a utility to analyze computational experiments has been added to GCG, dual solutions can be postsolved by PaPILO, new heuristics and presolving methods were added to SCIP-SDP, and additional problem classes and major performance improvements are available in SCIP-Jack.}, language = {en} } @misc{BolusaniBesanconBestuzhevaetal.2024, author = {Bolusani, Suresh and Besan{\c{c}}on, Mathieu and Bestuzheva, Ksenia and Chmiela, Antonia and Dion{\´i}sio, Jo{\~a}o and Donkiewicz, Tim and van Doornmalen, Jasper and Eifler, Leon and Ghannam, Mohammed and Gleixner, Ambros and Graczyk, Christoph and Halbig, Katrin and Hedtke, Ivo and Hoen, Alexander and Hojny, Christopher and van der Hulst, Rolf and Kamp, Dominik and Koch, Thorsten and Kofler, Kevin and Lentz, Jurgen and Manns, Julian and Mexi, Gioni and M{\"u}hmer, Erik and E. Pfetsch, Marc and Schl{\"o}sser, Franziska and Serrano, Felipe and Shinano, Yuji and Turner, Mark and Vigerske, Stefan and Weninger, Dieter and Xu, Liding}, title = {The SCIP Optimization Suite 9.0}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-95528}, year = {2024}, abstract = {The SCIP Optimization Suite provides a collection of software packages for mathematical optimization, centered around the constraint integer programming framework SCIP. This report discusses the enhancements and extensions included in the SCIP Optimization Suite 9.0. The updates in SCIP 9.0 include improved symmetry handling, additions and improvements of nonlinear handlers and primal heuristics, a new cut generator and two new cut selection schemes, a new branching rule, a new LP interface, and several bug fixes. The SCIP Optimization Suite 9.0 also features new Rust and C++ interfaces for SCIP, new Python interface for SoPlex, along with enhancements to existing interfaces. The SCIP Optimization Suite 9.0 also includes new and improved features in the LP solver SoPlex, the presolving library PaPILO, the parallel framework UG, the decomposition framework GCG, and the SCIP extension SCIP-SDP. These additions and enhancements have resulted in an overall performance improvement of SCIP in terms of solving time, number of nodes in the branch-and-bound tree, as well as the reliability of the solver.}, language = {en} } @misc{BestuzhevaChmielaMuelleretal.2023, author = {Bestuzheva, Ksenia and Chmiela, Antonia and M{\"u}ller, Benjamin and Serrano, Felipe and Vigerske, Stefan and Wegscheider, Fabian}, title = {Global Optimization of Mixed-Integer Nonlinear Programs with SCIP 8.0}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-89348}, year = {2023}, abstract = {For over ten years, the constraint integer programming framework SCIP has been extended by capabilities for the solution of convex and nonconvex mixed-integer nonlinear programs (MINLPs). With the recently published version~8.0, these capabilities have been largely reworked and extended. This paper discusses the motivations for recent changes and provides an overview of features that are particular to MINLP solving in SCIP. Further, difficulties in benchmarking global MINLP solvers are discussed and a comparison with several state-of-the-art global MINLP solvers is provided.}, language = {en} }