@misc{WeiserGoetschel, author = {Weiser, Martin and G{\"o}tschel, Sebastian}, title = {State Trajectory Compression for Optimal Control with Parabolic PDEs}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-11676}, number = {10-05}, abstract = {In optimal control problems with nonlinear time-dependent 3D PDEs, full 4D discretizations are usually prohibitive due to the storage requirement. For this reason gradient and quasi-Newton methods working on the reduced functional are often employed. The computation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. The state enters into the adjoint equation, again requiring the storage of a full 4D data set. We propose a lossy compression algorithm using an inexact but cheap predictor for the state data, with additional entropy coding of prediction errors. As the data is used inside a discretized, iterative algorithm, lossy coding maintaining an error bound is sufficient.}, language = {en} } @article{WeiserGoetschel, author = {Weiser, Martin and G{\"o}tschel, Sebastian}, title = {State Trajectory Compression for Optimal Control with Parabolic PDEs}, series = {SIAM J. Sci. Comput.}, volume = {34}, journal = {SIAM J. Sci. Comput.}, number = {1}, doi = {10.1137/11082172X}, pages = {A161 -- A184}, abstract = {In optimal control problems with nonlinear time-dependent 3D PDEs, full 4D discretizations are usually prohibitive due to the storage requirement. For this reason gradient and quasi-Newton methods working on the reduced functional are often employed. The computation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. The state enters into the adjoint equation, again requiring the storage of a full 4D data set. We propose a lossy compression algorithm using an inexact but cheap predictor for the state data, with additional entropy coding of prediction errors. As the data is used inside a discretized, iterative algorithm, lossy coding maintaining an error bound is sufficient.}, language = {en} } @article{WeberFischerDamerauetal., author = {Weber, Marie-Christin and Fischer, Lisa and Damerau, Alexandra and Ponomarev, Igor and Pfeiffenberger, Moritz and Gaber, Timo and G{\"o}tschel, Sebastian and Lang, Jens and R{\"o}blitz, Susanna and Buttgereit, Frank and Ehrig, Rainald and Lang, Annemarie}, title = {In vitro and in silico modeling of cellular and matrix-related changes during the early phase of osteoarthritis}, series = {BioRxiv}, journal = {BioRxiv}, doi = {10.1101/725317}, abstract = {Understanding the pathophysiological processes of osteoarthritis (OA) require adequate model systems. Although different in vitro or in vivo models have been described, further comprehensive approaches are needed to study specific parts of the disease. This study aimed to combine in vitro and in silico modeling to describe cellular and matrix-related changes during the early phase of OA. We developed an in vitro OA model based on scaffold-free cartilage-like constructs (SFCCs), which was mathematically modeled using a partial differential equation (PDE) system to resemble the processes during the onset of OA. SFCCs were produced from mesenchymal stromal cells and analyzed weekly by histology and qPCR to characterize the cellular and matrix-related composition. To simulate the early phase of OA, SFCCs were treated with interleukin-1β (IL-1β), tumor necrosis factor α (TNFα) and examined after 3 weeks or cultivated another 3 weeks without inflammatory cytokines to validate the regeneration potential. Mathematical modeling was performed in parallel to the in vitro experiments. SFCCs expressed cartilage-specific markers, and after stimulation an increased expression of inflammatory markers, matrix degrading enzymes, a loss of collagen II (Col-2) and a reduced cell density was observed which could be partially reversed by retraction of stimulation. Based on the PDEs, the distribution processes within the SFCCs, including those of IL-1β, Col-2 degradation and cell number reduction was simulated. By combining in vitro and in silico methods, we aimed to develop a valid, efficient alternative approach to examine and predict disease progression and new therapeutic strategies.}, language = {en} } @article{WeberFischerDamerauetal., author = {Weber, Marie-Christin and Fischer, Lisa and Damerau, Alexandra and Ponomarev, Igor and Pfeiffenberger, Moritz and Gaber, Timo and G{\"o}tschel, Sebastian and Lang, Jens and R{\"o}blitz, Susanna and Buttgereit, Frank and Ehrig, Rainald and Lang, Annemarie}, title = {Macroscale mesenchymal condensation to study cytokine-driven cellular and matrix-related changes during cartilage degradation}, series = {Biofabrication}, volume = {12}, journal = {Biofabrication}, number = {4}, doi = {10.1088/1758-5090/aba08f}, abstract = {Understanding the pathophysiological processes of cartilage degradation requires adequate model systems to develop therapeutic strategies towards osteoarthritis (OA). Although different in vitro or in vivo models have been described, further comprehensive approaches are needed to study specific disease aspects. This study aimed to combine in vitro and in silico modeling based on a tissue-engineering approach using mesenchymal condensation to mimic cytokine-induced cellular and matrix-related changes during cartilage degradation. Thus, scaffold-free cartilage-like constructs (SFCCs) were produced based on self-organization of mesenchymal stromal cells (mesenchymal condensation) and i) characterized regarding their cellular and matrix composition or secondly ii) treated with interleukin-1β (IL-1β) and tumor necrosis factor α (TNFα) for 3 weeks to simulate OA-related matrix degradation. In addition, an existing mathematical model based on partial differential equations was optimized and transferred to the underlying settings to simulate distribution of IL-1β, type II collagen degradation and cell number reduction. By combining in vitro and in silico methods, we aim to develop a valid, efficient alternative approach to examine and predict disease progression and effects of new therapeutics.}, language = {en} } @inproceedings{MuellerGoetschelWeiseretal., author = {M{\"u}ller, Jan and G{\"o}tschel, Sebastian and Weiser, Martin and Maierhofer, Christiane}, title = {Thermografie mit optimierter Anregung f{\"u}r die quantitative Untersuchung von Delaminationen in kohlenstofffaserverst{\"a}rkten Kunststoffen}, series = {NDT.net Proc. DGZfP 2017}, booktitle = {NDT.net Proc. DGZfP 2017}, abstract = {Da kohlenstofffaserverst{\"a}rkte Kunststoffe (CFK) in anspruchsvollen sicherheitsrelevanten Einsatzgebieten wie im Automobilbau und in der Luftfahrt eingesetzt werden, besteht ein zunehmender Bedarf an zerst{\"o}rungsfreien Pr{\"u}fmethoden. Ziel ist die Gew{\"a}hrleistung der Sicherheit und Zuverl{\"a}ssigkeit der eingesetzten Bauteile. Aktive Thermografieverfahren erm{\"o}glichen die effiziente Pr{\"u}fung großer Fl{\"a}chen mit hoher Aufl{\"o}sung in wenigen Arbeitsschritten. Ein wichtiges Teilgebiet der Pr{\"u}fungen ist die Ortung und Charakterisierung von Delaminationen, die sowohl bereits in der Fertigung als auch w{\"a}hrend der Nutzung eines Bauteils auftreten k{\"o}nnen, und dessen strukturelle Integrit{\"a}t schw{\"a}chen. ;In diesem Beitrag werden CFK-Strukturen mit k{\"u}nstlichen und nat{\"u}rlichen Delaminationen mit Hilfe unterschiedlich zeitlich modulierter Strahlungsquellen experimentell untersucht. Verwendet werden dabei Anregungen mit Blitzlampen und mit frequenzmodulierten Halogenlampen. Mittels Filterfunktionen im Zeit- und Frequenzbereich wird das Kontrast-zu-Rausch-Verh{\"a}ltnis (CNR) der detektierten Fehlstellen optimiert. Verglichen werden anschließend die Nachweisempfindlichkeit, das CNR und die Ortsaufl{\"o}sung der zu charakterisierenden Delaminationen f{\"u}r die unterschiedlichen Anregungs- und Auswertungstechniken. Erg{\"a}nzt werden die Experimente durch numerische Simulationen des dreidimensionalen W{\"a}rmetransportes.}, language = {de} } @inproceedings{MuellerGoetschelMaierhoferetal., author = {M{\"u}ller, Jan and G{\"o}tschel, Sebastian and Maierhofer, Christiane and Weiser, Martin}, title = {Determining the material parameters for the reconstruction of defects in carbon fiber reinforced polymers from data measured by flash thermography}, series = {AIP Conference Proceedings}, volume = {1806}, booktitle = {AIP Conference Proceedings}, doi = {10.1063/1.4974671}, language = {en} } @misc{GoetschelWeiserSchiela, author = {G{\"o}tschel, Sebastian and Weiser, Martin and Schiela, Anton}, title = {Solving Optimal Control Problems with the Kaskade 7 Finite Element Toolbox}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-11909}, number = {10-25}, abstract = {This paper presents concepts and implementation of the finite element toolbox Kaskade 7, a flexible C++ code for solving elliptic and parabolic PDE systems. Issues such as problem formulation, assembly and adaptivity are discussed at the example of optimal control problems. Trajectory compression for parabolic optimization problems is considered as a case study.}, language = {en} } @misc{GoetschelWeiserSchiela, author = {G{\"o}tschel, Sebastian and Weiser, Martin and Schiela, Anton}, title = {Solving Optimal Control Problems with the Kaskade 7 Finite Element Toolbox}, series = {Advances in DUNE}, journal = {Advances in DUNE}, editor = {Dedner, A. and Flemisch, B. and Kl{\"o}fkorn, R.}, publisher = {Springer}, pages = {101 -- 112}, abstract = {This paper presents concepts and implementation of the finite element toolbox Kaskade 7, a flexible C++ code for solving elliptic and parabolic PDE systems. Issues such as problem formulation, assembly and adaptivity are discussed at the example of optimal control problems. Trajectory compression for parabolic optimization problems is considered as a case study.}, language = {en} } @article{GoetschelWeiserMaierhoferetal., author = {G{\"o}tschel, Sebastian and Weiser, Martin and Maierhofer, Christiane and Richter, Regina and R{\"o}llig, Mathias}, title = {Fast Defect Shape Reconstruction Based on the Travel Time in Pulse Thermography}, series = {Nondestructive Testing of Materials and Structures}, volume = {6}, journal = {Nondestructive Testing of Materials and Structures}, pages = {83 -- 89}, language = {en} } @misc{GoetschelWeiserMaierhoferetal., author = {G{\"o}tschel, Sebastian and Weiser, Martin and Maierhofer, Christiane and Richter, Regina}, title = {Data Enhancement for Active Thermography}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-15243}, abstract = {Pulse thermography is a non-destructive testing method based on infrared imaging of transient thermal patterns. Heating the surface of the structure under test for a short period of time generates a non-stationary temperature distribution and thus a thermal contrast between the defect and the sound material. Due to measurement noise, preprocessing of the experimental data is necessary, before reconstruction algorithms can be applied. We propose a decomposition of the measured temperature into Green's function solutions to eliminate noise.}, language = {en} }