@inproceedings{MuellerGoetschelMaierhoferetal.2017, author = {M{\"u}ller, Jan and G{\"o}tschel, Sebastian and Maierhofer, Christiane and Weiser, Martin}, title = {Determining the material parameters for the reconstruction of defects in carbon fiber reinforced polymers from data measured by flash thermography}, volume = {1806}, booktitle = {AIP Conference Proceedings}, doi = {10.1063/1.4974671}, year = {2017}, language = {en} } @misc{FischerGoetschelWeiser2017, author = {Fischer, Lisa and G{\"o}tschel, Sebastian and Weiser, Martin}, title = {Lossy data compression reduces communication time in hybrid time-parallel integrators}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-63961}, year = {2017}, abstract = {Parallel in time methods for solving initial value problems are a means to increase the parallelism of numerical simulations. Hybrid parareal schemes interleaving the parallel in time iteration with an iterative solution of the individual time steps are among the most efficient methods for general nonlinear problems. Despite the hiding of communication time behind computation, communication has in certain situations a significant impact on the total runtime. Here we present strict, yet no sharp, error bounds for hybrid parareal methods with inexact communication due to lossy data compression, and derive theoretical estimates of the impact of compression on parallel efficiency of the algorithms. These and some computational experiments suggest that compression is a viable method to make hybrid parareal schemes robust with respect to low bandwidth setups.}, language = {en} } @misc{GoetschelMinion2017, author = {G{\"o}tschel, Sebastian and Minion, Michael L.}, title = {Parallel-in-Time for Parabolic Optimal Control Problems Using PFASST}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-64989}, year = {2017}, abstract = {In gradient-based methods for parabolic optimal control problems, it is necessary to solve both the state equation and a backward-in-time adjoint equation in each iteration of the optimization method. In order to facilitate fully parallel gradient-type and nonlinear conjugate gradient methods for the solution of such optimal control problems, we discuss the application of the parallel-in-time method PFASST to adjoint gradient computation. In addition to enabling time parallelism, PFASST provides high flexibility for handling nonlinear equations, as well as potential extra computational savings from reusing previous solutions in the optimization loop. The approach is demonstrated here for a model reaction-diffusion optimal control problem.}, language = {en} } @article{FischerGoetschelWeiser2018, author = {Fischer, Lisa and G{\"o}tschel, Sebastian and Weiser, Martin}, title = {Lossy data compression reduces communication time in hybrid time-parallel integrators}, volume = {19}, journal = {Comput. Vis. Sci.}, number = {1}, doi = {10.1007/s00791-018-0293-2}, pages = {19 -- 30}, year = {2018}, abstract = {Parallel in time methods for solving initial value problems are a means to increase the parallelism of numerical simulations. Hybrid parareal schemes interleaving the parallel in time iteration with an iterative solution of the individual time steps are among the most efficient methods for general nonlinear problems. Despite the hiding of communication time behind computation, communication has in certain situations a significant impact on the total runtime. Here we present strict, yet no sharp, error bounds for hybrid parareal methods with inexact communication due to lossy data compression, and derive theoretical estimates of the impact of compression on parallel efficiency of the algorithms. These and some computational experiments suggest that compression is a viable method to make hybrid parareal schemes robust with respect to low bandwidth setups.}, language = {en} } @misc{GoetschelWeiserMaierhoferetal.2012, author = {G{\"o}tschel, Sebastian and Weiser, Martin and Maierhofer, Christiane and Richter, Regina}, title = {Data Enhancement for Active Thermography}, journal = {E-book Proceedings, 11th International Conference on Quantitative Infrared Thermography, Naples}, editor = {Cardone, Gennaro}, year = {2012}, abstract = {Pulse thermography is a non-destructive testing method based on infrared imaging of transient thermal patterns. Heating the surface of the structure under test for a short period of time generates a non-stationary temperature distribution and thus a thermal contrast between the defect and the sound material. Due to measurement noise, preprocessing of the experimental data is necessary, before reconstruction algorithms can be applied. We propose a decomposition of the measured temperature into Green's function solutions to eliminate noise.}, language = {en} } @misc{GoetschelWeiserSchiela2012, author = {G{\"o}tschel, Sebastian and Weiser, Martin and Schiela, Anton}, title = {Solving Optimal Control Problems with the Kaskade 7 Finite Element Toolbox}, journal = {Advances in DUNE}, editor = {Dedner, A. and Flemisch, B. and Kl{\"o}fkorn, R.}, publisher = {Springer}, pages = {101 -- 112}, year = {2012}, abstract = {This paper presents concepts and implementation of the finite element toolbox Kaskade 7, a flexible C++ code for solving elliptic and parabolic PDE systems. Issues such as problem formulation, assembly and adaptivity are discussed at the example of optimal control problems. Trajectory compression for parabolic optimization problems is considered as a case study.}, language = {en} } @article{WeiserGoetschel2012, author = {Weiser, Martin and G{\"o}tschel, Sebastian}, title = {State Trajectory Compression for Optimal Control with Parabolic PDEs}, volume = {34}, journal = {SIAM J. Sci. Comput.}, number = {1}, doi = {10.1137/11082172X}, pages = {A161 -- A184}, year = {2012}, abstract = {In optimal control problems with nonlinear time-dependent 3D PDEs, full 4D discretizations are usually prohibitive due to the storage requirement. For this reason gradient and quasi-Newton methods working on the reduced functional are often employed. The computation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. The state enters into the adjoint equation, again requiring the storage of a full 4D data set. We propose a lossy compression algorithm using an inexact but cheap predictor for the state data, with additional entropy coding of prediction errors. As the data is used inside a discretized, iterative algorithm, lossy coding maintaining an error bound is sufficient.}, language = {en} } @article{GoetschelWeiser2010, author = {G{\"o}tschel, Sebastian and Weiser, Martin}, title = {State Trajectory Compression in Optimal Control}, volume = {10}, journal = {PAMM}, number = {1}, doi = {10.1002/pamm.201010282}, pages = {579 -- 580}, year = {2010}, abstract = {In optimal control problems with nonlinear time-dependent 3D PDEs, the computation of the reduced gradient by adjoint methods requires one solve of the state equation forward in time, and one backward solve of the adjoint equation. Since the state enters into the adjoint equation, the storage of a 4D discretization is necessary. We propose a lossy compression algorithm using a cheap predictor for the state data, with additional entropy coding of prediction errors. Analytical and numerical results indicate that compression factors around 30 can be obtained without exceeding the FE discretization error.}, language = {en} } @misc{GoetschelMaierhoferMuelleretal.2016, author = {G{\"o}tschel, Sebastian and Maierhofer, Christiane and M{\"u}ller, Jan P. and Rothbart, Nick and Weiser, Martin}, title = {Quantitative Defect Reconstruction in Active Thermography for Fiber-Reinforced Composites}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-58374}, year = {2016}, abstract = {Carbon-fiber reinforced composites are becoming more and more important in the production of light-weight structures, e.g., in the automotive and aerospace industry. Thermography is often used for non-destructive testing of these products, especially to detect delaminations between different layers of the composite. In this presentation, we aim at methods for defect reconstruction from thermographic measurements of such carbon-fiber reinforced composites. The reconstruction results shall not only allow to locate defects, but also give a quantitative characterization of the defect properties. We discuss the simulation of the measurement process using finite element methods, as well as the experimental validation on flat bottom holes. Especially in pulse thermography, thin boundary layers with steep temperature gradients occurring at the heated surface need to be resolved. Here we use the combination of a 1D analytical solution combined with numerical solution of the remaining defect equation. We use the simulations to identify material parameters from the measurements. Finally, fast heuristics for reconstructing defect geometries are applied to the acquired data, and compared for their accuracy and utility in detecting different defects like back surface defects or delaminations.}, language = {en} } @misc{GoetschelHoehneKolkoorietal.2016, author = {G{\"o}tschel, Sebastian and H{\"o}hne, Christian and Kolkoori, Sanjeevareddy and Mitzscherling, Steffen and Prager, Jens and Weiser, Martin}, title = {Ray Tracing Boundary Value Problems: Simulation and SAFT Reconstruction for Ultrasonic Testing}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-58386}, year = {2016}, abstract = {The application of advanced imaging techniques for the ultrasonic inspection of inhomogeneous anisotropic materials like austenitic and dissimilar welds requires information about acoustic wave propagation through the material, in particular travel times between two points in the material. Forward ray tracing is a popular approach to determine traveling paths and arrival times but is ill suited for inverse problems since a large number of rays have to be computed in order to arrive at prescribed end points. In this contribution we discuss boundary value problems for acoustic rays, where the ray path between two given points is determined by solving the eikonal equation. The implementation of such a two point boundary value ray tracer for sound field simulations through an austenitic weld is described and its efficiency as well as the obtained results are compared to those of a forward ray tracer. The results are validated by comparison with experimental results and commercially available UT simulation tools. As an application, we discuss an implementation of the method for SAFT (Synthetic Aperture Focusing Technique) reconstruction. The ray tracer calculates the required travel time through the anisotropic columnar grain structure of the austenitic weld. There, the formulation of ray tracing as a boundary value problem allows a straightforward derivation of the ray path from a given transducer position to any pixel in the reconstruction area and reduces the computational cost considerably.}, language = {en} }