@article{SchlechteBorndoerferEroletal.2011, author = {Schlechte, Thomas and Bornd{\"o}rfer, Ralf and Erol, Berkan and Graffagnino, Thomas and Swarat, Elmar}, title = {Micro-macro transformation of railway networks}, volume = {1}, journal = {Journal of Rail Transport Planning \& Management}, number = {1}, doi = {10.1016/j.jrtpm.2011.09.001}, pages = {38 -- 48}, year = {2011}, abstract = {In this paper a bottom-up approach of automatic simplification of a railway network is presented. Starting from a very detailed, microscopic level, as it is used in railway simulation, the network is transformed by an algorithm to a less detailed level (macroscopic network), that is sufficient for long-term planning and optimization. In addition running and headway times are rounded to a pre-chosen time discretization by a special cumulative method, which we will present and analyse in this paper. After the transformation we fill the network with given train requests to compute an optimal slot allocation. Then the optimized schedule is re-transformed into the microscopic level and can be simulated without any conflicts occuring between the slots. The algorithm is used to transform the network of the very dense Simplon corridor between Swiss and Italy. With our aggregation it is possible for the first time to generate a profit maximal and conflict free timetable for the corridor across a day by a simultaneously optimization run.}, language = {en} } @article{BorndoerferErolGraffagninoetal.2012, author = {Bornd{\"o}rfer, Ralf and Erol, Berkan and Graffagnino, Thomas and Schlechte, Thomas and Swarat, Elmar}, title = {Optimizing the Simplon railway corridor}, volume = {218}, journal = {Annals of Operations Research}, number = {1}, edition = {Annals of Operations Research}, publisher = {Springer US}, doi = {10.1007/s10479-012-1260-9}, pages = {93 -- 106}, year = {2012}, language = {en} } @article{BreugemSchlechteSchulzetal.2023, author = {Breugem, Thomas and Schlechte, Thomas and Schulz, Christof and Bornd{\"o}rfer, Ralf}, title = {A three-phase heuristic for the Fairness-Oriented Crew Rostering Problem}, volume = {154}, journal = {Computers \& Operations Research}, doi = {10.1016/j.cor.2023.106186}, pages = {106186}, year = {2023}, abstract = {The Fairness-Oriented Crew Rostering Problem (FCRP) considers the joint optimization of attractiveness and fairness in cyclic crew rostering. Like many problems in scheduling and logistics, the combinatorial complexity of cyclic rostering causes exact methods to fail for large-scale practical instances. In case of the FCRP, this is accentuated by the additionally imposed fairness requirements. Hence, heuristic methods are necessary. We present a three-phase heuristic for the FCRP combining column generation techniques with variable-depth neighborhood search. The heuristic exploits different mathematical formulations to find feasible solutions and to search for improvements. We apply our methodology to practical instances from Netherlands Railways (NS), the main passenger railway operator in the Netherlands Our results show the three-phase heuristic finds good solutions for most instances and outperforms a state-of-the-art commercial solver.}, language = {en} } @article{HarrodSchlechte2013, author = {Harrod, Steven and Schlechte, Thomas}, title = {A Direct Comparison of Physical Block Occupancy Versus Timed Block Occupancy in Train Timetabling Formulations}, volume = {54}, journal = {Transportation Research Part E: Logistics and Transportation Review}, doi = {10.1016/j.tre.2013.04.003}, pages = {50 -- 66}, year = {2013}, abstract = {Two fundamental mathematical formulations for railway timetabling are compared on a common set of sample problems, representing both multiple track high density services in Europe and single track bidirectional operations in North America. One formulation, ACP, enforces against conflicts by constraining time intervals between trains, while the other formulation, RCHF, monitors physical occupation of controlled track segments. The results demonstrate that both ACP and RCHF return comparable solutions in the aggregate, with some significant differences in select instances, and a pattern of significant differences in performance and constraint enforcement overall.}, language = {en} } @inproceedings{BorndoerferGrimmSchlechte2019, author = {Bornd{\"o}rfer, Ralf and Grimm, Boris and Schlechte, Thomas}, title = {Re-optimizing ICE Rotations after a Tunnel Breakdown near Rastatt}, volume = {Link{\"o}ping Electronic Conference Proceedings}, booktitle = {Proceedings of the 8th International Conference on Railway Operations Modelling and Analysis - RailNorrk{\"o}ping 2019}, number = {069}, publisher = {Link{\"o}ping University Electronic Press, Link{\"o}pings universitet}, address = {Link{\"o}ping, Sweden}, isbn = {978-91-7929-992-7}, issn = {1650-3686}, pages = {160 -- 168}, year = {2019}, abstract = {Planning rolling stock movements in industrial passenger railway applications isa long-term process based on timetables which are also often valid for long periods of time. For these timetables and rotation plans, i.e., plans of railway vehicle movements are constructed as templates for these periods. During operation the rotation plans are affected by all kinds of unplanned events. An unusal example for that is the collapse of a tunnel ceiling near Rastatt in southern Germany due to construction works related to the renewal of the central station in Stuttgart. As a result the main railway connection between Stuttgart and Frankfurt am Main, located on top of the tunnel, had to be closed from August 12th to October 2nd 2017. This had a major impact on the railway network in southern Germany. Hence, all rotation plans and train schedules for both passenger and cargo traffic had to be revised. In this paper we focus on a case study for this situation and compute new rotation plans via mixed integer programming for the ICE high speed fleet of DB Fernverkehr AG one of the largest passenger railway companies in Europe. In our approach we take care of some side constraints to ensure a smooth continuation of the rotation plans after the disruption has ended.}, language = {en} } @article{BorndoerferGrimmReutheretal.2019, author = {Bornd{\"o}rfer, Ralf and Grimm, Boris and Reuther, Markus and Schlechte, Thomas}, title = {Optimization of handouts for rolling stock rotations}, journal = {Journal of Rail Transport Planning \& Management}, number = {10}, doi = {10.1016/j.jrtpm.2019.02.001}, pages = {1 -- 8}, year = {2019}, abstract = {A railway operator creates (rolling stock) rotations in order to have a precise master plan for the operation of a timetable by railway vehicles. A rotation is considered as a cycle that multiply traverses a set of operational days while covering trips of the timetable. As it is well known, the proper creation of rolling stock rotations by, e.g., optimization algorithms is challenging and still a topical research subject. Nevertheless, we study a completely different but strongly related question in this paper, i.e.: How to visualize a rotation? For this purpose, we introduce a basic handout concept, which directly leads to the visualization, i.e., handout of a rotation. In our industrial application at DB Fernverkehr AG, the handout is exactly as important as the rotation itself. Moreover, it turns out that also other European railway operators use exactly the same methodology (but not terminology). Since a rotation can have many handouts of different quality, we show how to compute optimal ones through an integer program (IP) by standard software. In addition, a construction as well as an improvement heuristic are presented. Our computational results show that the heuristics are a very reliable standalone approach to quickly find near-optimal and even optimal handouts. The efficiency of the heuristics is shown via a computational comparison to the IP approach.}, language = {en} } @inproceedings{BertholdGrimmReutheretal.2019, author = {Berthold, Timo and Grimm, Boris and Reuther, Markus and Schade, Stanley and Schlechte, Thomas}, title = {Strategic Planning of Rolling Stock Rotations for Public Tenders}, volume = {Link{\"o}ping Electronic Conference Proceedings}, booktitle = {Proceedings of the 8th International Conference on Railway Operations Modelling and Analysis - RailNorrköping 2019}, number = {069}, publisher = {Link{\"o}ping University Electronic Press, Link{\"o}pings universitet}, isbn = {978-91-7929-992-7}, issn = {1650-3686}, pages = {148 -- 159}, year = {2019}, abstract = {Since railway companies have to apply for long-term public contracts to operate railway lines in public tenders, the question how they can estimate the operating cost for long-term periods adequately arises naturally. We consider a rolling stock rotation problem for a time period of ten years, which is based on a real world instance provided by an industry partner. We use a two stage approach for the cost estimation of the required rolling stock. In the first stage, we determine a weekly rotation plan. In the second stage, we roll out this weekly rotation plan for a longer time period and incorporate scheduled maintenance treatments. We present a heuristic approach and a mixed integer programming model to implement the process of the second stage. Finally, we discuss computational results for a real world tendering scenario.}, language = {en} } @book{AbbinkBaermannBešinovicetal.2018, author = {Abbink, Erwin and B{\"a}rmann, Andreas and Bešinovic, Nikola and Bohlin, Markus and Cacchiani, Valentina and Caimi, Gabrio and de Fabris, Stefano and Dollevoet, Twan and Fischer, Frank and F{\"u}genschuh, Armin and Galli, Laura and Goverde, Rob M.P. and Hansmann, Ronny and Homfeld, Henning and Huisman, Dennis and Johann, Marc and Klug, Torsten and T{\"o}rnquist Krasemann, Johanna and Kroon, Leo and Lamorgese, Leonardo and Liers, Frauke and Mannino, Carlo and Medeossi, Giorgio and Pacciarelli, Dario and Reuther, Markus and Schlechte, Thomas and Schmidt, Marie and Sch{\"o}bel, Anita and Sch{\"u}lldorf, Hanno and Stieber, Anke and Stiller, Sebastian and Toth, Paolo and Zimmermann, Uwe}, title = {Handbook of Optimization in the Railway Industry}, volume = {268}, editor = {Bornd{\"o}rfer, Ralf and Klug, Torsten and Lamorgese, Leonardo and Mannino, Carlo and Reuther, Markus and Schlechte, Thomas}, publisher = {Springer Verlag}, isbn = {978-3-319-72152-1}, doi = {10.1007/978-3-319-72153-8}, year = {2018}, abstract = {This book promotes the use of mathematical optimization and operations research methods in rail transportation. The editors assembled thirteen contributions from leading scholars to present a unified voice, standardize terminology, and assess the state-of-the-art. There are three main clusters of articles, corresponding to the classical stages of the planning process: strategic, tactical, and operational. These three clusters are further subdivided into five parts which correspond to the main phases of the railway network planning process: network assessment, capacity planning, timetabling, resource planning, and operational planning. Individual chapters cover: Simulation Capacity Assessment Network Design Train Routing Robust Timetabling Event Scheduling Track Allocation Blocking Shunting Rolling Stock Crew Scheduling Dispatching Delay Propagation}, language = {en} } @inproceedings{GrimmBorndoerferReutheretal.2019, author = {Grimm, Boris and Bornd{\"o}rfer, Ralf and Reuther, Markus and Schlechte, Thomas}, title = {A Cut Separation Approach for the Rolling Stock Rotation Problem with Vehicle Maintenance}, volume = {75}, booktitle = {19th Symposium on Algorithmic Approaches for Transportation Modelling, Optimization, and Systems (ATMOS 2019)}, editor = {Cacchiani, Valentina and Marchetti-Spaccamela, Alberto}, publisher = {Schloss Dagstuhl--Leibniz-Zentrum fuer Informatik}, address = {Dagstuhl, Germany}, doi = {10.4230/OASIcs.ATMOS.2019.1}, pages = {1:1 -- 1:12}, year = {2019}, abstract = {For providing railway services the company's railway rolling stock is one if not the most important ingredient. It decides about the number of passenger or cargo trips the company can offer, about the quality a passenger experiences the train ride and it is often related to the image of the company itself. Thus, it is highly desired to have the available rolling stock in the best shape possible. Moreover, in many countries, as Germany where our industrial partner DB Fernverkehr AG (DBF) is located, laws enforce regular vehicle inspections to ensure the safety of the passengers. This leads to rolling stock optimization problems with complex rules for vehicle maintenance. This problem is well studied in the literature for example see [Mar{\´o}ti and Kroon, 2005; G{\´a}bor Mar{\´o}ti and Leo G. Kroon, 2007], or [Cordeau et al., 2001] for applications including vehicle maintenance. The contribution of this paper is a new algorithmic approach to solve the Rolling Stock Rotation Problem for the ICE high speed train fleet of DBF with included vehicle maintenance. It is based on a relaxation of a mixed integer linear programming model with an iterative cut generation to enforce the feasibility of a solution of the relaxation in the solution space of the original problem. The resulting mixed integer linear programming model is based on a hypergraph approach presented in [Ralf Bornd{\"o}rfer et al., 2015]. The new approach is tested on real world instances modeling different scenarios for the ICE high speed train network in Germany and compared to the approaches of [Reuther, 2017] that are in operation at DB Fernverkehr AG. The approach shows a significant reduction of the run time to produce solutions with comparable or even better objective function values.}, language = {en} } @inproceedings{BorndoerferKarbsteinMehrgahrdtetal.2016, author = {Bornd{\"o}rfer, Ralf and Karbstein, Marika and Mehrgahrdt, Julika and Reuther, Markus and Schlechte, Thomas}, title = {The Cycle Embedding Problem}, booktitle = {Operations Research Proceedings 2014}, doi = {10.1007/978-3-319-28697-6_65}, pages = {465 -- 472}, year = {2016}, abstract = {Given two hypergraphs, representing a fine and a coarse "layer", and a cycle cover of the nodes of the coarse layer, the cycle embedding problem (CEP) asks for an embedding of the coarse cycles into the fine layer. The CEP is NP-hard for general hypergraphs, but it can be solved in polynomial time for graphs. We propose an integer rogramming formulation for the CEP that provides a complete escription of the CEP polytope for the graphical case. The CEP comes up in railway vehicle rotation scheduling. We present computational results for problem instances of DB Fernverkehr AG that justify a sequential coarse-first-fine-second planning approach.}, language = {en} } @inproceedings{RenkenAhmadiBorndoerferetal.2018, author = {Renken, Malte and Ahmadi, Amin and Bornd{\"o}rfer, Ralf and Sahin, Guvenc and Schlechte, Thomas}, title = {Demand-Driven Line Planning with Selfish Routing}, booktitle = {Operations Research Proceedings 2017}, publisher = {Springer International Publishing}, doi = {10.1007/978-3-319-89920-6_91}, pages = {687 -- 692}, year = {2018}, abstract = {Bus rapid transit systems in developing and newly industrialized countries are often operated at the limits of passenger capacity. In particular, demand during morning and afternoon peaks is hardly or even not covered with available line plans. In order to develop demand-driven line plans, we use two mathematical models in the form of integer programming problem formulations. While the actual demand data is specified with origin-destination pairs, the arc-based model considers the demand over the arcs derived from the origin-destination demand. In order to test the accuracy of the models in terms of demand satisfaction, we simulate the optimal solutions and compare number of transfers and travel times. We also question the effect of a selfish route choice behavior which in theory results in a Braess-like paradox by increasing the number of transfers when system capacity is increased with additional lines.}, language = {en} } @inproceedings{SchadeSchlechteWitzig2018, author = {Schade, Stanley and Schlechte, Thomas and Witzig, Jakob}, title = {Structure-based Decomposition for Pattern-Detection for Railway Timetables}, booktitle = {Operations Research Proceedings 2017}, publisher = {Springer International Publishing}, doi = {10.1007/978-3-319-89920-6_95}, pages = {715 -- 721}, year = {2018}, abstract = {We consider the problem of pattern detection in large scale railway timetables. This problem arises in rolling stock optimization planning in order to identify invariant sections of the timetable for which a cyclic rotation plan is adequate. We propose a dual reduction technique which leads to an decomposition and enumeration method. Computational results for real world instances demonstrate that the method is able to produce optimal solutions as fast as standard MIP solvers.}, language = {en} } @inproceedings{BorndoerferBreuerGrimmetal.2018, author = {Bornd{\"o}rfer, Ralf and Breuer, Matthias and Grimm, Boris and Reuther, Markus and Schade, Stanley and Schlechte, Thomas}, title = {Timetable Sparsification by Rolling Stock Rotation Optimization}, booktitle = {Operations Research 2017}, publisher = {Springer International Publishing}, doi = {10.1007/978-3-319-89920-6_96}, pages = {723 -- 728}, year = {2018}, abstract = {Rolling stock optimization is a task that naturally arises by operating a railway system. It could be seen with different level of details. From a strategic perspective to have a rough plan which types of fleets to be bought to a more operational perspective to decide which coaches have to be maintained first. This paper presents a new approach to deal with rolling stock optimisation in case of a (long term) strike. Instead of constructing a completely new timetable for the strike period, we propose a mixed integer programming model that is able to choose appropriate trips from a given timetable to construct efficient tours of railway vehicles covering an optimized subset of trips, in terms of deadhead kilometers and importance of the trips. The decision which trip is preferred over the other is made by a simple evaluation method that is deduced from the network and trip defining data.}, language = {en} } @article{BorndoerferGroetschelLukacetal.2006, author = {Bornd{\"o}rfer, Ralf and Gr{\"o}tschel, Martin and Lukac, Sascha and Mitusch, Kay and Schlechte, Thomas and Schultz, S{\"o}ren and Tanner, Andreas}, title = {An Auctioning Approach to Railway Slot Allocation}, volume = {1}, journal = {Competition and Regulation in Network Industries}, number = {2}, pages = {163 -- 196}, year = {2006}, language = {en} } @article{RaackRaymondSchlechteetal.2013, author = {Raack, Christian and Raymond, Annie and Schlechte, Thomas and Werner, Axel}, title = {Standings in sports competitions using integer programming}, volume = {10}, journal = {Journal of Quantitative Analysis in Sports}, number = {2}, publisher = {De Gruyter}, doi = {10.1515/jqas-2013-0111}, pages = {131 -- 137}, year = {2013}, language = {en} } @inproceedings{Schlechte2012, author = {Schlechte, Thomas}, title = {Railway Track Allocation}, booktitle = {Operations Research Proceedings}, doi = {10.1007/978-3-319-00795-314}, pages = {15 -- 20}, year = {2012}, language = {en} } @article{BorndoerferReutherSchlechteetal.2012, author = {Bornd{\"o}rfer, Ralf and Reuther, Markus and Schlechte, Thomas and Weider, Steffen}, title = {Vehicle Rotation Planning for Intercity Railways}, journal = {Proceedings of Conference on Advanced Systems for Public Transport 2012 (CASPT12)}, editor = {Mu{\~n}oz, J. C. and Voß, S.}, year = {2012}, abstract = {This paper provides a generic formulation for rolling stock planning problems in the context of intercity passenger traffic. The main contributions are a graph theoretical model and a Mixed-Integer-Programming formulation that integrate all main requirements of the considered Vehicle-Rotation-Planning problem (VRPP). We show that it is possible to solve this model for real-world instances provided by our industrial partner DB Fernverkehr AG using modern algorithms and computers.}, language = {en} } @article{BorndoerferLoebelReutheretal.2013, author = {Bornd{\"o}rfer, Ralf and L{\"o}bel, Andreas and Reuther, Markus and Schlechte, Thomas and Weider, Steffen}, title = {Rapid Branching}, volume = {5}, journal = {Public Transport}, number = {1}, editor = {Mu{\~n}oz, J. C. and Voß, S.}, publisher = {Springer Berlin Heidelberg}, pages = {3 -- 23}, year = {2013}, abstract = {We propose rapid branching (RB) as a general branch-and-bound heuristic for solving large scale optimization problems in traffic and transport. The key idea is to combine a special branching rule and a greedy node selection strategy in order to produce solutions of controlled quality rapidly and efficiently. We report on three successful applications of the method for integrated vehicle and crew scheduling, railway track allocation, and railway vehicle rotation planning.}, language = {en} } @article{HeinzSchlechteStephanetal.2012, author = {Heinz, Stefan and Schlechte, Thomas and Stephan, R{\"u}diger and Winkler, Michael}, title = {Solving steel mill slab design problems}, volume = {17}, journal = {Constraints}, number = {1}, doi = {10.1007/s10601-011-9113-8}, pages = {39 -- 50}, year = {2012}, abstract = {The steel mill slab design problem from the CSPLIB is a combinatorial optimization problem motivated by an application of the steel industry. It has been widely studied in the constraint programming community. Several methods were proposed to solve this problem. A steel mill slab library was created which contains 380 instances. A closely related binpacking problem called the multiple knapsack problem with color constraints, originated from the same industrial problem, was discussed in the integer programming community. In particular, a simple integer program for this problem has been given by Forrest et al. (INFORMS J Comput 18:129-134, 2006). The aim of this paper is to bring these different studies together. Moreover, we adapt the model of Forrest et al. (INFORMS J Comput 18:129-134, 2006) for the steel mill slab design problem. Using this model and a state-of-the-art integer program solver all instances of the steel mill slab library can be solved efficiently to optimality. We improved, thereby, the solution values of 76 instances compared to previous results (Schaus et al., Constraints 16:125-147, 2010). Finally, we consider a recently introduced variant of the steel mill slab design problem, where within all solutions which minimize the leftover one is interested in a solution which requires a minimum number of slabs. For that variant we introduce two approaches and solve all instances of the steel mill slab library with this slightly changed objective function to optimality.}, language = {en} } @article{BorndoerferSchlechteSwarat2012, author = {Bornd{\"o}rfer, Ralf and Schlechte, Thomas and Swarat, Elmar}, title = {Railway Track Allocation -- Simulation, Aggregation, and Optimization}, volume = {2}, journal = {Proc. 1st International Workshop on High-speed and Intercity Railways (IWHIR 2011)}, number = {148}, doi = {10.1007/978-3-642-27963-8}, pages = {53 -- 70}, year = {2012}, abstract = {Today the railway timetabling process and the track allocation is one of the most challenging problems to solve by a railway company. Especially due to the deregulation of the transport market in the recent years several suppliers of railway traffic have entered the market in Europe. This leads to more potential conflicts between trains caused by an increasing demand of train paths. Planning and operating railway transportation systems is extremely hard due to the combinatorial complexity of the underlying discrete optimization problems, the technical intricacies, and the immense size of the problem instances. In order to make best use of the infrastructure and to ensure economic operation, efficient planning of the railway operation is indispensable. Mathematical optimization models and algorithms can help to automatize and tackle these challenges. Our contribution in this paper is to present a renewed planning process due to the liberalization in Europe and an associated concept for track allocation, that consists of three important parts, simulation, aggregation, and optimization. Furthermore, we present results of our general framework for real world data.}, language = {en} } @article{BorndoerferReutherSchlechteetal.2011, author = {Bornd{\"o}rfer, Ralf and Reuther, Markus and Schlechte, Thomas and Weider, Steffen}, title = {A Hypergraph Model for Railway Vehicle Rotation Planning}, volume = {OpenAccess Series in Informatics (OASIcs)}, journal = {11th Workshop on Algorithmic Approaches for Transportation Modelling, Optimization, and Systems}, number = {20}, doi = {10.4230/OASIcs.ATMOS.2011.146}, pages = {146 -- 155}, year = {2011}, abstract = {We propose a model for the integrated optimization of vehicle rotations and vehicle compositions in long distance railway passenger transport. The main contribution of the paper is a hypergraph model that is able to handle the challenging technical requirements as well as very general stipulations with respect to the ``regularity'' of a schedule. The hypergraph model directly generalizes network flow models, replacing arcs with hyperarcs. Although NP-hard in general, the model is computationally well-behaved in practice. High quality solutions can be produced in reasonable time using high performance Integer Programming techniques, in particular, column generation and rapid branching. We show that, in this way, large-scale real world instances of our cooperation partner DB Fernverkehr can be solved.}, language = {en} } @article{Schlechte2011, author = {Schlechte, Thomas}, title = {Railway Track Allocation - Simulation and Optimization}, volume = {4}, journal = {Proceedings of 4th International Seminar on Railway Operations Modelling and Analysis (IAROR)}, year = {2011}, abstract = {Today the railway timetabling process and the track allocation is one of the most challenging problems to solve by a railway infrastructure provider. Especially due to the deregulation of the transport market in the recent years several suppliers of railway traffic have entered the market. This leads to an increase of slot requests and then it is natural that conflicts occur among them. Furthermore, railway infrastructure networks consist of very expensive assets, even more they are rigid due to the long-term upgrade process. In order to make best use of these valuable infrastructure and to ensure economic operation, efficient planning of the railway operation is indispensable. Mathematical optimization models and algorithmic methodology can help to automatize and tackle these challenges. Our contribution in this paper is to present a renewed planning process due to the liberalization in Europe and a general framework to support the integration of simulation and optimization for railway capacity allocation.}, language = {en} } @article{BorndoerferFuegenschuhKlugetal.2016, author = {Bornd{\"o}rfer, Ralf and F{\"u}genschuh, Armin and Klug, Torsten and Schang, Thilo and Schlechte, Thomas and Sch{\"u}lldorf, Hanno}, title = {The Freight Train Routing Problem for Congested Railway Networks with Mixed Traffic}, volume = {50}, journal = {Transportation Science}, number = {2}, doi = {10.1287/trsc.2015.0656}, pages = {408 -- 423}, year = {2016}, abstract = {We consider the following freight train routing problem (FTRP). Given is a transportation network with fixed routes for passenger trains and a set of freight trains (requests), each defined by an origin and destination station pair. The objective is to calculate a feasible route for each freight train such that the sum of all expected delays and all running times is minimal. Previous research concentrated on microscopic train routings for junctions or inside major stations. Only recently approaches were developed to tackle larger corridors or even networks. We investigate the routing problem from a strategic perspective, calculating the routes in a macroscopic transportation network of Deutsche Bahn AG. In this context, macroscopic refers to an aggregation of complex and large real-world structures into fewer network elements. Moreover, the departure and arrival times of freight trains are approximated. The problem has a strategic character since it asks only for a coarse routing through the network without the precise timings. We provide a mixed-integer nonlinear programming (MINLP) formulation for the FTRP, which is a multicommodity flow model on a time-expanded graph with additional routing constraints. The model's nonlinearities originate from an algebraic approximation of the delays of the trains on the arcs of the network by capacity restraint functions. The MINLP is reduced to a mixed-integer linear model (MILP) by piecewise linear approximation. The latter is solved by a state-of-the art MILP solver for various real-world test instances.}, language = {en} }