@article{GellermannWeihrauchChoetal.2006, author = {Gellermann, Johanna and Weihrauch, Mirko and Cho, C. and Wlodarczyk, Waldemar and F{\"a}hling, Horst and Felix, Roland and Budach, Volker and Weiser, Martin and Nadobny, Johanna and Wust, Peter}, title = {Comparison of MR-thermography and planning calculations in phantoms}, volume = {33}, journal = {Medical Physics}, pages = {3912 -- 3920}, year = {2006}, language = {en} } @article{GaenzlerVolkweinWeiser2006, author = {G{\"a}nzler, Tobias and Volkwein, S. and Weiser, Martin}, title = {SQP methods for parameter identification problems arising in hyperthermia}, volume = {21}, journal = {Optim. Methods Softw.}, number = {6}, pages = {869 -- 887}, year = {2006}, language = {en} } @article{SchielaWeiser2008, author = {Schiela, Anton and Weiser, Martin}, title = {Superlinear convergence of the Control Reduced Interior Point Method for PDE Constrained Optimization}, volume = {39}, journal = {Computational Optimization and Applications}, number = {3}, pages = {369 -- 393}, year = {2008}, language = {en} } @incollection{ZachowWeiserHegeetal.2005, author = {Zachow, Stefan and Weiser, Martin and Hege, Hans-Christian and Deuflhard, Peter}, title = {Soft Tissue Prediction in Computer Assisted Maxillofacial Surgery Planning}, booktitle = {Biomechanics Applied to Computer Assisted Surgery}, editor = {Payan, Y.}, publisher = {Research Signpost}, pages = {277 -- 298}, year = {2005}, language = {en} } @incollection{ZachowWeiserDeuflhard2008, author = {Zachow, Stefan and Weiser, Martin and Deuflhard, Peter}, title = {Modellgest{\"u}tzte Operationsplanung in der Kopfchirurgie}, booktitle = {Modellgest{\"u}tzte Therapie}, editor = {Niederlag, Wolfgang and Lemke, Heinz and Meixensberger, J{\"u}rgen and Baumann, Michael}, publisher = {Health Academy}, pages = {140 -- 156}, year = {2008}, language = {en} } @article{Weiser2009, author = {Weiser, Martin}, title = {Pointwise Nonlinear Scaling for Reaction-Diffusion Equations}, volume = {59}, journal = {Appl. Num. Math.}, number = {8}, pages = {1858 -- 1869}, year = {2009}, language = {en} } @article{WeiserDeuflhardErdmann2007, author = {Weiser, Martin and Deuflhard, Peter and Erdmann, Bodo}, title = {Affine conjugate adaptive Newton methods for nonlinear elastomechanics}, volume = {22}, journal = {Opt. Meth. Softw.}, number = {3}, pages = {413 -- 431}, year = {2007}, language = {en} } @article{WeihrauchWustWeiseretal.2007, author = {Weihrauch, Mirko and Wust, Peter and Weiser, Martin and Nadobny, Johanna and Eisenhardt, Steffen and Budach, Volker and Gellermann, Johanna}, title = {Adaptation of antenna profiles for control of MR guided hyperthermia (HT) in a hybrid MR-HT system}, volume = {34}, journal = {Medical Physics}, number = {12}, pages = {4717 -- 4725}, year = {2007}, language = {en} } @article{Weiser2005, author = {Weiser, Martin}, title = {Interior point methods in function space}, volume = {44}, journal = {SIAM J. Control Optimization}, number = {5}, pages = {1766 -- 1786}, year = {2005}, language = {en} } @article{VolkweinWeiser2002, author = {Volkwein, S. and Weiser, Martin}, title = {Affine Invariant Convergence Analysis for Inexact Augmented Lagrangian SQP Methods}, volume = {41}, journal = {SIAM J. Control Optim.}, number = {3}, pages = {875 -- 899}, year = {2002}, language = {en} } @techreport{VolkweinWeiser2004, author = {Volkwein, S. and Weiser, Martin}, title = {Optimality Conditions for a Constrained Parameter Identification Problem in Hyperthermia}, number = {305}, publisher = {University of Graz, SFB F003}, address = {Graz, Austria}, year = {2004}, language = {en} } @article{WeiserGaenzlerSchiela2008, author = {Weiser, Martin and G{\"a}nzler, Tobias and Schiela, Anton}, title = {A control reduced primal interior point method for a class of control constrained optimal control problems}, volume = {41}, journal = {Comput. Optim. Appl.}, number = {1}, pages = {127 -- 145}, year = {2008}, language = {en} } @article{WeiserSchiela2004, author = {Weiser, Martin and Schiela, Anton}, title = {Function space interior point methods for PDE constrained optimization}, volume = {4}, journal = {PAMM}, number = {1}, pages = {43 -- 46}, year = {2004}, language = {en} } @article{WeiserSchielaDeuflhard2005, author = {Weiser, Martin and Schiela, Anton and Deuflhard, Peter}, title = {Asymptotic Mesh Independence of Newton's Method Revisited}, volume = {42}, journal = {SIAM J. Num. Anal.}, number = {5}, pages = {1830 -- 1845}, year = {2005}, language = {en} } @article{Weiser2009, author = {Weiser, Martin}, title = {Optimization and Identification in Regional Hyperthermia}, volume = {30}, journal = {Int. J. Appl. Electromagn. and Mech.}, pages = {265 -- 275}, year = {2009}, language = {en} } @article{PruefertTroeltzschWeiser2008, author = {Pr{\"u}fert, Uwe and Tr{\"o}ltzsch, Fredi and Weiser, Martin}, title = {The convergence of an interior point method for an elliptic control problem with mixed control-state constraints}, volume = {39}, journal = {Comput. Optim. Appl.}, number = {2}, pages = {183 -- 218}, year = {2008}, language = {en} } @article{HorenkoWeiserSchmidtetal.2004, author = {Horenko, Illia and Weiser, Martin and Schmidt, Burkhard and Sch{\"u}tte, Christof}, title = {Fully Adaptive Propagation of the Quantum-Classical Liouville Equation}, volume = {120}, journal = {J. Chem. Phys.}, number = {19}, doi = {10.1063/1.1691015}, pages = {8913 -- 8923}, year = {2004}, language = {en} } @inproceedings{GoetschelTycowiczPolthieretal.2015, author = {G{\"o}tschel, Sebastian and Tycowicz, Christoph von and Polthier, Konrad and Weiser, Martin}, title = {Reducing Memory Requirements in Scientific Computing and Optimal Control}, booktitle = {Multiple Shooting and Time Domain Decomposition Methods}, editor = {Carraro, T. and Geiger, M. and Koerkel, S. and Rannacher, R.}, publisher = {Springer}, pages = {263 -- 287}, year = {2015}, language = {en} } @article{GoetschelNagaiahKunischetal.2014, author = {G{\"o}tschel, Sebastian and Nagaiah, Chamakuri and Kunisch, Karl and Weiser, Martin}, title = {Lossy Compression in Optimal Control of Cardiac Defibrillation}, volume = {60}, journal = {J. Sci. Comput.}, number = {1}, doi = {10.1007/s10915-013-9785-x}, pages = {35 -- 59}, year = {2014}, abstract = {This paper presents efficient computational techniques for solving an optimization problem in cardiac defibrillation governed by the monodomain equations. Time-dependent electrical currents injected at different spatial positions act as the control. Inexact Newton-CG methods are used, with reduced gradient computation by adjoint solves. In order to reduce the computational complexity, adaptive mesh refinement for state and adjoint equations is performed. To reduce the high storage and bandwidth demand imposed by adjoint gradient and Hessian-vector evaluations, a lossy compression technique for storing trajectory data is applied. An adaptive choice of quantization tolerance based on error estimates is developed in order to ensure convergence. The efficiency of the proposed approach is demonstrated on numerical examples.}, language = {en} } @article{GoetschelWeiserMaierhoferetal.2013, author = {G{\"o}tschel, Sebastian and Weiser, Martin and Maierhofer, Christiane and Richter, Regina and R{\"o}llig, Mathias}, title = {Fast Defect Shape Reconstruction Based on the Travel Time in Pulse Thermography}, volume = {6}, journal = {Nondestructive Testing of Materials and Structures}, pages = {83 -- 89}, year = {2013}, language = {en} } @article{GoetschelWeiser2015, author = {G{\"o}tschel, Sebastian and Weiser, Martin}, title = {Lossy Compression for PDE-constrained Optimization: Adaptive Error Control}, volume = {62}, journal = {Comput. Optim. Appl.}, number = {1}, publisher = {Springer}, pages = {131 -- 155}, year = {2015}, abstract = {For the solution of optimal control problems governed by nonlinear parabolic PDEs, methods working on the reduced objective functional are often employed to avoid a full spatio-temporal discretization of the problem. The evaluation of the reduced gradient requires one solve of the state equation forward in time, and one backward solve of the ad-joint equation. The state enters into the adjoint equation, requiring the storage of a full 4D data set. If Newton-CG methods are used, two additional trajectories have to be stored. To get numerical results which are accurate enough, in many case very fine discretizations in time and space are necessary, which leads to a significant amount of data to be stored and transmitted to mass storage. Lossy compression methods were developed to overcome the storage problem by reducing the accuracy of the stored trajectories. The inexact data induces errors in the reduced gradient and reduced Hessian. In this paper, we analyze the influence of such a lossy trajectory compression method on Newton-CG methods for optimal control of parabolic PDEs and design an adaptive strategy for choosing appropriate quantization tolerances.}, language = {en} } @article{SchenklMuggenthalerHubigetal.2017, author = {Schenkl, Sebastian and Muggenthaler, Holger and Hubig, Michael and Erdmann, Bodo and Weiser, Martin and Zachow, Stefan and Heinrich, Andreas and G{\"u}ttler, Felix Victor and Teichgr{\"a}ber, Ulf and Mall, Gita}, title = {Automatic CT-based finite element model generation for temperature-based death time estimation: feasibility study and sensitivity analysis}, volume = {131}, journal = {International Journal of Legal Medicine}, number = {3}, doi = {doi:10.1007/s00414-016-1523-0}, pages = {699 -- 712}, year = {2017}, abstract = {Temperature based death time estimation is based either on simple phenomenological models of corpse cooling or on detailed physical heat transfer models. The latter are much more complex, but allow a higher accuracy of death time estimation as in principle all relevant cooling mechanisms can be taken into account. Here, a complete work flow for finite element based cooling simulation models is presented. The following steps are demonstrated on CT-phantoms: • CT-scan • Segmentation of the CT images for thermodynamically relevant features of individual geometries • Conversion of the segmentation result into a Finite Element (FE) simulation model • Computation of the model cooling curve • Calculation of the cooling time For the first time in FE-based cooling time estimation the steps from the CT image over segmentation to FE model generation are semi-automatically performed. The cooling time calculation results are compared to cooling measurements performed on the phantoms under controlled conditions. In this context, the method is validated using different CTphantoms. Some of the CT phantoms thermodynamic material parameters had to be experimentally determined via independent experiments. Moreover the impact of geometry and material parameter uncertainties on the estimated cooling time is investigated by a sensitivity analysis.}, language = {en} } @article{WeiserFreytagErdmannetal.2018, author = {Weiser, Martin and Freytag, Yvonne and Erdmann, Bodo and Hubig, Michael and Mall, Gita}, title = {Optimal Design of Experiments for Estimating the Time of Death in Forensic Medicine}, volume = {34}, journal = {Inverse Problems}, number = {12}, doi = {10.1088/1361-6420/aae7a5}, pages = {125005}, year = {2018}, abstract = {Estimation of time of death based on a single measurement of body core temperature is a standard procedure in forensic medicine. Mechanistic models using simulation of heat transport promise higher accuracy than established phenomenological models in particular in nonstandard situations, but involve many not exactly known physical parameters. Identifying both time of death and physical parameters from multiple temperature measurements is one possibility to reduce the uncertainty significantly. In this paper, we consider the inverse problem in a Bayesian setting and perform both local and sampling-based uncertainty quantification, where proper orthogonal decomposition is used as model reduction for fast solution of the forward model. Based on the local uncertainty quantification, optimal design of experiments is performed in order to minimize the uncertainty in the time of death estimate for a given number of measurements. For reasons of practicability, temperature acquisition points are selected from a set of candidates in different spatial and temporal locations. Applied to a real corpse model, a significant accuracy improvement is obtained already with a small number of measurements.}, language = {en} } @article{GoetschelSchielaWeiser2021, author = {G{\"o}tschel, Sebastian and Schiela, Anton and Weiser, Martin}, title = {Kaskade 7 - a Flexible Finite Element Toolbox}, volume = {81}, journal = {Computers and Mathematics with Applications}, doi = {10.1016/j.camwa.2020.02.011}, pages = {444 -- 458}, year = {2021}, abstract = {Kaskade 7 is a finite element toolbox for the solution of stationary or transient systems of partial differential equations, aimed at supporting application-oriented research in numerical analysis and scientific computing. The library is written in C++ and is based on the \textsc{Dune} interface. The code is independent of spatial dimension and works with different grid managers. An important feature is the mix-and-match approach to discretizing systems of PDEs with different ansatz and test spaces for all variables. We describe the mathematical concepts behind the library as well as its structure, illustrating its use at several examples on the way.}, language = {en} } @inproceedings{KrauseWeiser2021, author = {Krause, Rolf and Weiser, Martin}, title = {Multilevel augmented Lagrangian solvers for overconstrained contact formulations}, volume = {71}, booktitle = {ESAIM: ProcS}, doi = {10.1051/proc/202171175}, pages = {175 -- 184}, year = {2021}, abstract = {Multigrid methods for two-body contact problems are mostly based on special mortar discretizations, nonlinear Gauss-Seidel solvers, and solution-adapted coarse grid spaces. Their high computational efficiency comes at the cost of a complex implementation and a nonsymmetric master-slave discretization of the nonpenetration condition. Here we investigate an alternative symmetric and overconstrained segment-to-segment contact formulation that allows for a simple implementation based on standard multigrid and a symmetric treatment of contact boundaries, but leads to nonunique multipliers. For the solution of the arising quadratic programs, we propose augmented Lagrangian multigrid with overlapping block Gauss-Seidel smoothers. Approximation and convergence properties are studied numerically at standard test problems.}, language = {en} } @article{AlhaddadFoerstnerGrothetal.2021, author = {Alhaddad, Samer and F{\"o}rstner, Jens and Groth, Stefan and Gr{\"u}newald, Daniel and Grynko, Yevgen and Hannig, Frank and Kenter, Tobias and Pfreundt, Franz-Josef and Plessl, Christian and Schotte, Merlind and Steinke, Thomas and Teich, J{\"u}rgen and Weiser, Martin and Wende, Florian}, title = {HighPerMeshes - A Domain-Specific Language for Numerical Algorithms on Unstructured Grids}, journal = {Euro-Par 2020: Parallel Processing Workshops.}, publisher = {Springer}, doi = {10.1007/978-3-030-71593-9_15}, pages = {185 -- 196}, year = {2021}, abstract = {Solving partial differential equations on unstructured grids is a cornerstone of engineering and scientific computing. Nowadays, heterogeneous parallel platforms with CPUs, GPUs, and FPGAs enable energy-efficient and computationally demanding simulations. We developed the HighPerMeshes C++-embedded Domain-Specific Language (DSL) for bridging the abstraction gap between the mathematical and algorithmic formulation of mesh-based algorithms for PDE problems on the one hand and an increasing number of heterogeneous platforms with their different parallel programming and runtime models on the other hand. Thus, the HighPerMeshes DSL aims at higher productivity in the code development process for multiple target platforms. We introduce the concepts as well as the basic structure of the HighPer-Meshes DSL, and demonstrate its usage with three examples, a Poisson and monodomain problem, respectively, solved by the continuous finite element method, and the discontinuous Galerkin method for Maxwell's equation. The mapping of the abstract algorithmic description onto parallel hardware, including distributed memory compute clusters is presented. Finally, the achievable performance and scalability are demonstrated for a typical example problem on a multi-core CPU cluster.}, language = {en} } @inproceedings{MuellerGoetschelWeiseretal.2017, author = {M{\"u}ller, Jan and G{\"o}tschel, Sebastian and Weiser, Martin and Maierhofer, Christiane}, title = {Thermografie mit optimierter Anregung f{\"u}r die quantitative Untersuchung von Delaminationen in kohlenstofffaserverst{\"a}rkten Kunststoffen}, booktitle = {NDT.net Proc. DGZfP 2017}, year = {2017}, abstract = {Da kohlenstofffaserverst{\"a}rkte Kunststoffe (CFK) in anspruchsvollen sicherheitsrelevanten Einsatzgebieten wie im Automobilbau und in der Luftfahrt eingesetzt werden, besteht ein zunehmender Bedarf an zerst{\"o}rungsfreien Pr{\"u}fmethoden. Ziel ist die Gew{\"a}hrleistung der Sicherheit und Zuverl{\"a}ssigkeit der eingesetzten Bauteile. Aktive Thermografieverfahren erm{\"o}glichen die effiziente Pr{\"u}fung großer Fl{\"a}chen mit hoher Aufl{\"o}sung in wenigen Arbeitsschritten. Ein wichtiges Teilgebiet der Pr{\"u}fungen ist die Ortung und Charakterisierung von Delaminationen, die sowohl bereits in der Fertigung als auch w{\"a}hrend der Nutzung eines Bauteils auftreten k{\"o}nnen, und dessen strukturelle Integrit{\"a}t schw{\"a}chen. ;In diesem Beitrag werden CFK-Strukturen mit k{\"u}nstlichen und nat{\"u}rlichen Delaminationen mit Hilfe unterschiedlich zeitlich modulierter Strahlungsquellen experimentell untersucht. Verwendet werden dabei Anregungen mit Blitzlampen und mit frequenzmodulierten Halogenlampen. Mittels Filterfunktionen im Zeit- und Frequenzbereich wird das Kontrast-zu-Rausch-Verh{\"a}ltnis (CNR) der detektierten Fehlstellen optimiert. Verglichen werden anschließend die Nachweisempfindlichkeit, das CNR und die Ortsaufl{\"o}sung der zu charakterisierenden Delaminationen f{\"u}r die unterschiedlichen Anregungs- und Auswertungstechniken. Erg{\"a}nzt werden die Experimente durch numerische Simulationen des dreidimensionalen W{\"a}rmetransportes.}, language = {de} } @article{MoldenhauerWeiserZachow2017, author = {Moldenhauer, Marian and Weiser, Martin and Zachow, Stefan}, title = {Adaptive Algorithms for Optimal Hip Implant Positioning}, volume = {17}, journal = {PAMM}, number = {1}, doi = {10.1002/pamm.201710071}, pages = {203 -- 204}, year = {2017}, abstract = {In an aging society where the number of joint replacements rises, it is important to also increase the longevity of implants. In particular hip implants have a lifetime of at most 15 years. This derives primarily from pain due to implant migration, wear, inflammation, and dislocation, which is affected by the positioning of the implant during the surgery. Current joint replacement practice uses 2D software tools and relies on the experience of surgeons. Especially the 2D tools fail to take the patients' natural range of motion as well as stress distribution in the 3D joint induced by different daily motions into account. Optimizing the hip joint implant position for all possible parametrized motions under the constraint of a contact problem is prohibitively expensive as there are too many motions and every position change demands a recalculation of the contact problem. For the reduction of the computational effort, we use adaptive refinement on the parameter domain coupled with the interpolation method of Kriging. A coarse initial grid is to be locally refined using goal-oriented error estimation, reducing locally high variances. This approach will be combined with multi-grid optimization such that numerical errors are reduced.}, language = {en} } @article{TierneyMiraReinholdetal.2018, author = {Tierney, Nicholas J. and Mira, Antonietta and Reinhold, J. Jost and Weiser, Martin and Burkart, Roman and Benvenuti, Claudio and Auricchio, Angelo}, title = {Novel relocation methods for automatic external defibrillator improve out-of-hospital cardiac arrest coverage under limited resources}, journal = {Resuscitation}, number = {125}, doi = {10.1016/j.resuscitation.2018.01.055}, pages = {83 -- 89}, year = {2018}, abstract = {Background Mathematical optimisation models have recently been applied to identify ideal Automatic External Defibrillator (AED) locations that maximise coverage of Out of Hospital Cardiac Arrest (OHCA). However, these fixed location models cannot relocate existing AEDs in a flexible way, and have nearly exclusively been applied to urban regions. We developed a flexible location model for AEDs, compared its performance to existing fixed location and population models, and explored how these perform across urban and rural regions. Methods Optimisation techniques were applied to AED deployment and OHCA coverage was assessed. A total of 2802 geolocated OHCAs occurred in Canton Ticino, Switzerland, from January 1st 2005 to December 31st 2015. Results There were 719 AEDs in Canton Ticino. 635 (23\%) OHCA events occurred within 100m of an AED, with 306 (31\%) in urban, and 329 (18\%) in rural areas. Median distance from OHCA events to the nearest AED was 224m (168m urban vs. 269m rural). Flexible location models performed better than fixed location and population models, with the cost to deploy 20 new AEDs instead relocating 171 existing AEDs to new locations, improving OHCA coverage to 38\%, compared to 26\% using fixed models, and 24\% with the population based model. Conclusions Optimisation models for AEDs placement are superior to population models and should be strongly considered by communities when selecting areas for AED deployment. Compared to other models, flexible location models increase overall OHCA coverage, and decreases the distance to nearby AEDs, even in rural areas, while saving significant financial resources.}, language = {en} } @article{WeiserErdmannSchenkletal.2018, author = {Weiser, Martin and Erdmann, Bodo and Schenkl, Sebastian and Muggenthaler, Holger and Hubig, Michael and Mall, Gita and Zachow, Stefan}, title = {Uncertainty in Temperature-Based Determination of Time of Death}, volume = {54}, journal = {Heat and Mass Transfer}, number = {9}, publisher = {Springer}, doi = {10.1007/s00231-018-2324-4}, pages = {2815 -- 2826}, year = {2018}, abstract = {Temperature-based estimation of time of death (ToD) can be per- formed either with the help of simple phenomenological models of corpse cooling or with detailed mechanistic (thermodynamic) heat transfer mod- els. The latter are much more complex, but allow a higher accuracy of ToD estimation as in principle all relevant cooling mechanisms can be taken into account. The potentially higher accuracy depends on the accuracy of tissue and environmental parameters as well as on the geometric resolution. We in- vestigate the impact of parameter variations and geometry representation on the estimated ToD based on a highly detailed 3D corpse model, that has been segmented and geometrically reconstructed from a computed to- mography (CT) data set, differentiating various organs and tissue types.}, language = {en} } @article{SchneckWeiserWende2021, author = {Schneck, Jakob and Weiser, Martin and Wende, Florian}, title = {Impact of mixed precision and storage layout on additive Schwarz smoothers}, volume = {28}, journal = {Numerical Linear Algebra with Applications}, number = {4}, doi = {10.1002/nla.2366}, year = {2021}, abstract = {The growing discrepancy between CPU computing power and memory bandwidth drives more and more numerical algorithms into a bandwidth-bound regime. One example is the overlapping Schwarz smoother, a highly effective building block for iterative multigrid solution of elliptic equations with higher order finite elements. Two options of reducing the required memory bandwidth are sparsity exploiting storage layouts and representing matrix entries with reduced precision in floating point or fixed point format. We investigate the impact of several options on storage demand and contraction rate, both analytically in the context of subspace correction methods and numerically at an example of solid mechanics. Both perspectives agree on the favourite scheme: fixed point representation of Cholesky factors in nested dissection storage.}, language = {en} } @article{SchenkWaechterWeiser2008, author = {Schenk, O. and W{\"a}chter, Andreas and Weiser, Martin}, title = {Inertia Revealing Preconditioning For Large-Scale Nonconvex Constrained Optimization}, volume = {31}, journal = {SIAM J. Sci. Comp.}, number = {2}, pages = {939 -- 960}, year = {2008}, language = {en} } @article{WeiserDeuflhard2007, author = {Weiser, Martin and Deuflhard, Peter}, title = {Inexact central path following algorithms for optimal control problems}, volume = {46}, journal = {SIAM J. Control Opt.}, number = {3}, pages = {792 -- 815}, year = {2007}, language = {en} } @incollection{DeuflhardWeiser1997, author = {Deuflhard, Peter and Weiser, Martin}, title = {Local inexact Newton multilevel FEM for nonlinear elliptic problems}, booktitle = {Computational science for the 21st century}, editor = {et al. Bristeau, M.-O.}, publisher = {Chichester: John Wiley \& Sons.}, pages = {129 -- 138}, year = {1997}, language = {en} } @inproceedings{DeuflhardWeiser1998, author = {Deuflhard, Peter and Weiser, Martin}, title = {Global inexact Newton multilevel FEM for nonlinear elliptic problems}, volume = {3}, booktitle = {Multigrid methods V. proceedings of the 5th European multigrid conference, held in Stuttgart, Germany, October 1-4, 1996.}, editor = {et al. Hackbusch, Wolfgang}, publisher = {Berlin: Springer}, pages = {71 -- 89}, year = {1998}, language = {en} } @book{DeuflhardWeiser2011, author = {Deuflhard, Peter and Weiser, Martin}, title = {Numerische Mathematik 3}, publisher = {de Gruyter, Berlin}, year = {2011}, language = {de} } @book{DeuflhardWeiser2012, author = {Deuflhard, Peter and Weiser, Martin}, title = {Adaptive numerical solution of PDEs}, publisher = {de Gruyter}, address = {Berlin}, year = {2012}, language = {en} } @article{DeuflhardWeiserZachow2006, author = {Deuflhard, Peter and Weiser, Martin and Zachow, Stefan}, title = {Mathematics in Facial Surgery}, volume = {53}, journal = {AMS Notices}, number = {9}, pages = {1012 -- 1016}, year = {2006}, language = {en} } @article{WeiserZachowDeuflhard2010, author = {Weiser, Martin and Zachow, Stefan and Deuflhard, Peter}, title = {Craniofacial Surgery Planning Based on Virtual Patient Models}, volume = {52}, journal = {it - Information Technology}, number = {5}, publisher = {Oldenbourg Verlagsgruppe}, doi = {10.1524/itit.2010.0600}, pages = {258 -- 263}, year = {2010}, language = {en} } @inproceedings{WeiserScacchi2017, author = {Weiser, Martin and Scacchi, Simone}, title = {Spectral Deferred Correction methods for adaptive electro-mechanical coupling in cardiac simulation}, booktitle = {G. Russo et al.(eds.) Progress in Industrial Mathematics at ECMI 2014}, publisher = {Springer}, doi = {10.1007/978-3-319-23413-7_42}, pages = {321 -- 328}, year = {2017}, abstract = {We investigate spectral deferred correction (SDC) methods for time stepping and their interplay with spatio-temporal adaptivity, applied to the solution of the cardiac electro-mechanical coupling model. This model consists of the Monodomain equations, a reaction-diffusion system modeling the cardiac bioelectrical activity, coupled with a quasi-static mechanical model describing the contraction and relaxation of the cardiac muscle. The numerical approximation of the cardiac electro-mechanical coupling is a challenging multiphysics problem, because it exhibits very different spatial and temporal scales. Therefore, spatio-temporal adaptivity is a promising approach to reduce the computational complexity. SDC methods are simple iterative methods for solving collocation systems. We exploit their flexibility for combining them in various ways with spatio-temporal adaptivity. The accuracy and computational complexity of the resulting methods are studied on some numerical examples.}, language = {en} } @inproceedings{SagnolHegeWeiser2016, author = {Sagnol, Guillaume and Hege, Hans-Christian and Weiser, Martin}, title = {Using sparse kernels to design computer experiments with tunable precision}, booktitle = {22nd Intern. Conf. on Computational Statistics - COMPSTAT 2016, Oviedo, Spain, 23-26 August 2016, Proceedings ISBN 978-90-73592-36-0}, pages = {397 -- 408}, year = {2016}, language = {en} } @inproceedings{GoetschelHoehneKolkoorietal.2016, author = {G{\"o}tschel, Sebastian and H{\"o}hne, Christian and Kolkoori, Sanjeevareddy and Mitzscherling, Steffen and Prager, Jens and Weiser, Martin}, title = {Ray Tracing Boundary Value Problems: Simulation and SAFT Reconstruction for Ultrasonic Testing}, booktitle = {Proceedings 19th World Conference on Non-Destructive Testing (WCNDT 2016)}, year = {2016}, language = {en} } @inproceedings{GoetschelMaierhoferMuelleretal.2016, author = {G{\"o}tschel, Sebastian and Maierhofer, Christiane and M{\"u}ller, Jan and Rothbart, Nick and Weiser, Martin}, title = {Quantitative Defect Reconstruction in Active Thermography for Fiber-Reinforced Composites}, booktitle = {Proceedings 19th World Conference on Non-Destructive Testing (WCNDT 2016)}, year = {2016}, language = {en} } @inproceedings{MuellerGoetschelMaierhoferetal.2017, author = {M{\"u}ller, Jan and G{\"o}tschel, Sebastian and Maierhofer, Christiane and Weiser, Martin}, title = {Determining the material parameters for the reconstruction of defects in carbon fiber reinforced polymers from data measured by flash thermography}, volume = {1806}, booktitle = {AIP Conference Proceedings}, doi = {10.1063/1.4974671}, year = {2017}, language = {en} } @article{FischerGoetschelWeiser2018, author = {Fischer, Lisa and G{\"o}tschel, Sebastian and Weiser, Martin}, title = {Lossy data compression reduces communication time in hybrid time-parallel integrators}, volume = {19}, journal = {Comput. Vis. Sci.}, number = {1}, doi = {10.1007/s00791-018-0293-2}, pages = {19 -- 30}, year = {2018}, abstract = {Parallel in time methods for solving initial value problems are a means to increase the parallelism of numerical simulations. Hybrid parareal schemes interleaving the parallel in time iteration with an iterative solution of the individual time steps are among the most efficient methods for general nonlinear problems. Despite the hiding of communication time behind computation, communication has in certain situations a significant impact on the total runtime. Here we present strict, yet no sharp, error bounds for hybrid parareal methods with inexact communication due to lossy data compression, and derive theoretical estimates of the impact of compression on parallel efficiency of the algorithms. These and some computational experiments suggest that compression is a viable method to make hybrid parareal schemes robust with respect to low bandwidth setups.}, language = {en} } @misc{DeuflhardKornhuberSanderetal.2014, author = {Deuflhard, Peter and Kornhuber, Ralf and Sander, Oliver and Schiela, Anton and Weiser, Martin}, title = {Mathematics cures virtual patients}, volume = {1}, journal = {MATHEON-Mathematics for Key Technologies}, editor = {Deuflhard, Peter and Gr{\"o}tschel, Martin and H{\"o}mberg, Dietmar and Horst, Ulrich and Kramer, J{\"u}rg and Mehrmann, Volker and Polthier, Konrad and Schmidt, Frank and Sch{\"u}tte, Christof and Skutella, Martin and Sprekels, J{\"u}rgen}, publisher = {European Mathematical Society}, pages = {7 -- 25}, year = {2014}, language = {en} } @article{MoualeuNgangueWeiserEhrigetal.2015, author = {Moualeu-Ngangue, Dany Pascal and Weiser, Martin and Ehrig, Rainald and Deuflhard, Peter}, title = {Optimal control for a tuberculosis model with undetected cases in Cameroon}, volume = {20}, journal = {Communications in Nonlinear Science and Numerical Simulation}, number = {3}, doi = {10.1016/j.cnsns.2014.06.037}, pages = {986 -- 1003}, year = {2015}, abstract = {This paper considers the optimal control of tuberculosis through education, diagnosis campaign and chemoprophylaxis of latently infected. A mathematical model which includes important components such as undiagnosed infectious, diagnosed infectious, latently infected and lost-sight infectious is formulated. The model combines a frequency dependent and a density dependent force of infection for TB transmission. Through optimal control theory and numerical simulations, a cost-effective balance of two different intervention methods is obtained. Seeking to minimize the amount of money the government spends when tuberculosis remain endemic in the Cameroonian population, Pontryagin's maximum principle is used to characterize the optimal control. The optimality system is derived and solved numerically using the forward-backward sweep method (FBSM). Results provide a framework for designing cost-effective strategies for diseases with multiple intervention methods. It comes out that combining chemoprophylaxis and education, the burden of TB can be reduced by 80 \% in 10 years.}, language = {en} } @misc{GoetschelWeiserMaierhoferetal.2012, author = {G{\"o}tschel, Sebastian and Weiser, Martin and Maierhofer, Christiane and Richter, Regina}, title = {Data Enhancement for Active Thermography}, journal = {E-book Proceedings, 11th International Conference on Quantitative Infrared Thermography, Naples}, editor = {Cardone, Gennaro}, year = {2012}, abstract = {Pulse thermography is a non-destructive testing method based on infrared imaging of transient thermal patterns. Heating the surface of the structure under test for a short period of time generates a non-stationary temperature distribution and thus a thermal contrast between the defect and the sound material. Due to measurement noise, preprocessing of the experimental data is necessary, before reconstruction algorithms can be applied. We propose a decomposition of the measured temperature into Green's function solutions to eliminate noise.}, language = {en} } @article{Weiser2013, author = {Weiser, Martin}, title = {On goal-oriented adaptivity for elliptic optimal control problems}, volume = {28}, journal = {Opt. Meth. Softw.}, number = {13}, pages = {969 -- 992}, year = {2013}, abstract = {The paper proposes goal-oriented error estimation and mesh refinement for optimal control problems with elliptic PDE constraints using the value of the reduced cost functional as quantity of interest. Error representation, hierarchical error estimators, and greedy-style error indicators are derived and compared to their counterparts when using the all-at-once cost functional as quantity of interest. Finally, the efficiency of the error estimator and generated meshes are demonstrated on numerical examples.}, language = {en} } @article{DeuflhardSchielaWeiser2012, author = {Deuflhard, Peter and Schiela, Anton and Weiser, Martin}, title = {Mathematical Cancer Therapy Planning in Deep Regional Hyperthermia}, volume = {21}, journal = {Acta Numerica}, pages = {307 -- 378}, year = {2012}, abstract = {This paper surveys the required mathematics for a typical challenging problem from computational medicine, the cancer therapy planning in deep regional hyperthermia. In the course of many years of close cooperation with clinics, the medical problem gave rise to quite a number of subtle mathematical problems, part of which had been unsolved when the common project started. Efficiency of numerical algorithms, i.e. computational speed and monitored reliability, play a decisive role for the medical treatment. Off-the-shelf software had turned out to be not sufficient to meet the requirements of medicine. Rather, new mathematical theory as well as new numerical algorithms had to be developed. In order to make our algorithms useful in the clinical environment, new visualization software, a virtual lab, including 3D geometry processing of individual virtual patients had to be designed and implemented. Moreover, before the problems could be attacked by numerical algorithms, careful mathematical modelling had to be done. Finally, parameter identification and constrained optimization for the PDEs had to be newly analyzed and realized over the individual patient's geometry. Our new techniques had an impact on the specificity of the individual patients' treatment and on the construction of an improved hyperthermia applicator.}, language = {en} }