@article{DeuflhardWeiserSeebass2000, author = {Deuflhard, Peter and Weiser, Martin and Seebaß, Martin}, title = {A New Nonlinear Elliptic Multilevel FEM Applied to Regional Hyperthermia}, series = {Comput. Visual. Sci.}, volume = {3}, journal = {Comput. Visual. Sci.}, doi = {10.1007/PL00013546}, pages = {1 -- 6}, year = {2000}, language = {en} } @article{MoldenhauerWeiserZachow, author = {Moldenhauer, Marian and Weiser, Martin and Zachow, Stefan}, title = {Adaptive Algorithms for Optimal Hip Implant Positioning}, series = {PAMM}, volume = {17}, journal = {PAMM}, number = {1}, doi = {10.1002/pamm.201710071}, pages = {203 -- 204}, abstract = {In an aging society where the number of joint replacements rises, it is important to also increase the longevity of implants. In particular hip implants have a lifetime of at most 15 years. This derives primarily from pain due to implant migration, wear, inflammation, and dislocation, which is affected by the positioning of the implant during the surgery. Current joint replacement practice uses 2D software tools and relies on the experience of surgeons. Especially the 2D tools fail to take the patients' natural range of motion as well as stress distribution in the 3D joint induced by different daily motions into account. Optimizing the hip joint implant position for all possible parametrized motions under the constraint of a contact problem is prohibitively expensive as there are too many motions and every position change demands a recalculation of the contact problem. For the reduction of the computational effort, we use adaptive refinement on the parameter domain coupled with the interpolation method of Kriging. A coarse initial grid is to be locally refined using goal-oriented error estimation, reducing locally high variances. This approach will be combined with multi-grid optimization such that numerical errors are reduced.}, language = {en} } @article{SchenklMuggenthalerHubigetal.2017, author = {Schenkl, Sebastian and Muggenthaler, Holger and Hubig, Michael and Erdmann, Bodo and Weiser, Martin and Zachow, Stefan and Heinrich, Andreas and G{\"u}ttler, Felix Victor and Teichgr{\"a}ber, Ulf and Mall, Gita}, title = {Automatic CT-based finite element model generation for temperature-based death time estimation: feasibility study and sensitivity analysis}, series = {International Journal of Legal Medicine}, volume = {131}, journal = {International Journal of Legal Medicine}, number = {3}, doi = {doi:10.1007/s00414-016-1523-0}, pages = {699 -- 712}, year = {2017}, abstract = {Temperature based death time estimation is based either on simple phenomenological models of corpse cooling or on detailed physical heat transfer models. The latter are much more complex, but allow a higher accuracy of death time estimation as in principle all relevant cooling mechanisms can be taken into account. Here, a complete work flow for finite element based cooling simulation models is presented. The following steps are demonstrated on CT-phantoms: • CT-scan • Segmentation of the CT images for thermodynamically relevant features of individual geometries • Conversion of the segmentation result into a Finite Element (FE) simulation model • Computation of the model cooling curve • Calculation of the cooling time For the first time in FE-based cooling time estimation the steps from the CT image over segmentation to FE model generation are semi-automatically performed. The cooling time calculation results are compared to cooling measurements performed on the phantoms under controlled conditions. In this context, the method is validated using different CTphantoms. Some of the CT phantoms thermodynamic material parameters had to be experimentally determined via independent experiments. Moreover the impact of geometry and material parameter uncertainties on the estimated cooling time is investigated by a sensitivity analysis.}, language = {en} } @article{WeiserZachowDeuflhard2010, author = {Weiser, Martin and Zachow, Stefan and Deuflhard, Peter}, title = {Craniofacial Surgery Planning Based on Virtual Patient Models}, series = {it - Information Technology}, volume = {52}, journal = {it - Information Technology}, number = {5}, publisher = {Oldenbourg Verlagsgruppe}, doi = {10.1524/itit.2010.0600}, pages = {258 -- 263}, year = {2010}, language = {en} } @misc{GuentherLameckerWeiser, author = {G{\"u}nther, Andreas and Lamecker, Hans and Weiser, Martin}, title = {Direct LDDMM of Discrete Currents with Adaptive Finite Elements}, doi = {10.1007/s11263-012-0599-3}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-13090}, number = {11-22}, abstract = {We consider Large Deformation Diffeomorphic Metric Mapping of general \$m\$-currents. After stating an optimization algorithm in the function space of admissable morph generating velocity fields, two innovative aspects in this framework are presented and numerically investigated: First, we spatially discretize the velocity field with conforming adaptive finite elements and discuss advantages of this new approach. Second, we directly compute the temporal evolution of discrete \$m\$-current attributes.}, language = {en} } @misc{GuentherLameckerWeiser, author = {G{\"u}nther, Andreas and Lamecker, Hans and Weiser, Martin}, title = {Direct LDDMM of Discrete Currents with Adaptive Finite Elements}, series = {Proceedings of the Third International Workshop on Mathematical Foundations of Computational Anatomy - Geometrical and Statistical Methods for Modelling Biological Shape Variability}, journal = {Proceedings of the Third International Workshop on Mathematical Foundations of Computational Anatomy - Geometrical and Statistical Methods for Modelling Biological Shape Variability}, editor = {Pennec, X. and Joshi, S. and Nielsen, M.}, pages = {1 -- 14}, abstract = {We consider Large Deformation Diffeomorphic Metric Mapping of general \$m\$-currents. After stating an optimization algorithm in the function space of admissable morph generating velocity fields, two innovative aspects in this framework are presented and numerically investigated: First, we spatially discretize the velocity field with conforming adaptive finite elements and discuss advantages of this new approach. Second, we directly compute the temporal evolution of discrete \$m\$-current attributes.}, language = {en} } @misc{OezelKulkarniHasanetal., author = {{\"O}zel, M. Neset and Kulkarni, Abhishek and Hasan, Amr and Brummer, Josephine and Moldenhauer, Marian and Daumann, Ilsa-Maria and Wolfenberg, Heike and Dercksen, Vincent J. and Kiral, F. Ridvan and Weiser, Martin and Prohaska, Steffen and von Kleist, Max and Hiesinger, Peter Robin}, title = {Serial synapse formation through filopodial competition for synaptic seeding factors}, issn = {1438-0064}, doi = {10.1016/j.devcel.2019.06.014}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-74397}, abstract = {Following axon pathfinding, growth cones transition from stochastic filopodial exploration to the formation of a limited number of synapses. How the interplay of filopodia and synapse assembly ensures robust connectivity in the brain has remained a challenging problem. Here, we developed a new 4D analysis method for filopodial dynamics and a data-driven computational model of synapse formation for R7 photoreceptor axons in developing Drosophila brains. Our live data support a 'serial synapse formation' model, where at any time point only a single 'synaptogenic' filopodium suppresses the synaptic competence of other filopodia through competition for synaptic seeding factors. Loss of the synaptic seeding factors Syd-1 and Liprin-α leads to a loss of this suppression, filopodial destabilization and reduced synapse formation, which is sufficient to cause the destabilization of entire axon terminals. Our model provides a filopodial 'winner-takes-all' mechanism that ensures the formation of an appropriate number of synapses.}, language = {en} } @article{OzelKulkarniHasanetal., author = {Ozel, Mehmet Neset and Kulkarni, Abhishek and Hasan, Amr and Brummer, Josephine and Moldenhauer, Marian and Daumann, Ilsa-Maria and Wolfenberg, Heike and Dercksen, Vincent J. and Kiral, Ferdi Ridvan and Weiser, Martin and Prohaska, Steffen and von Kleist, Max and Hiesinger, Peter Robin}, title = {Serial synapse formation through filopodial competition for synaptic seeding factors}, series = {Developmental Cell}, volume = {50}, journal = {Developmental Cell}, number = {4}, doi = {10.1016/j.devcel.2019.06.014}, pages = {447 -- 461}, abstract = {Following axon pathfinding, growth cones transition from stochastic filopodial exploration to the formation of a limited number of synapses. How the interplay of filopodia and synapse assembly ensures robust connectivity in the brain has remained a challenging problem. Here, we developed a new 4D analysis method for filopodial dynamics and a data-driven computational model of synapse formation for R7 photoreceptor axons in developing Drosophila brains. Our live data support a 'serial synapse formation' model, where at any time point only a single 'synaptogenic' filopodium suppresses the synaptic competence of other filopodia through competition for synaptic seeding factors. Loss of the synaptic seeding factors Syd-1 and Liprin-α leads to a loss of this suppression, filopodial destabilization and reduced synapse formation, which is sufficient to cause the destabilization of entire axon terminals. Our model provides a filopodial 'winner-takes-all' mechanism that ensures the formation of an appropriate number of synapses.}, language = {en} } @misc{WeiserErdmannSchenkletal.2017, author = {Weiser, Martin and Erdmann, Bodo and Schenkl, Sebastian and Muggenthaler, Holger and Hubig, Michael and Mall, Gita and Zachow, Stefan}, title = {Uncertainty in Temperature-Based Determination of Time of Death}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-63818}, year = {2017}, abstract = {Temperature-based estimation of time of death (ToD) can be per- formed either with the help of simple phenomenological models of corpse cooling or with detailed mechanistic (thermodynamic) heat transfer mod- els. The latter are much more complex, but allow a higher accuracy of ToD estimation as in principle all relevant cooling mechanisms can be taken into account. The potentially higher accuracy depends on the accuracy of tissue and environmental parameters as well as on the geometric resolution. We in- vestigate the impact of parameter variations and geometry representation on the estimated ToD based on a highly detailed 3D corpse model, that has been segmented and geometrically reconstructed from a computed to- mography (CT) data set, differentiating various organs and tissue types. From that we identify the most crucial parameters to measure or estimate, and obtain a local uncertainty quantifcation for the ToD.}, language = {en} } @article{WeiserErdmannSchenkletal., author = {Weiser, Martin and Erdmann, Bodo and Schenkl, Sebastian and Muggenthaler, Holger and Hubig, Michael and Mall, Gita and Zachow, Stefan}, title = {Uncertainty in Temperature-Based Determination of Time of Death}, series = {Heat and Mass Transfer}, volume = {54}, journal = {Heat and Mass Transfer}, number = {9}, publisher = {Springer}, doi = {10.1007/s00231-018-2324-4}, pages = {2815 -- 2826}, abstract = {Temperature-based estimation of time of death (ToD) can be per- formed either with the help of simple phenomenological models of corpse cooling or with detailed mechanistic (thermodynamic) heat transfer mod- els. The latter are much more complex, but allow a higher accuracy of ToD estimation as in principle all relevant cooling mechanisms can be taken into account. The potentially higher accuracy depends on the accuracy of tissue and environmental parameters as well as on the geometric resolution. We in- vestigate the impact of parameter variations and geometry representation on the estimated ToD based on a highly detailed 3D corpse model, that has been segmented and geometrically reconstructed from a computed to- mography (CT) data set, differentiating various organs and tissue types.}, language = {en} } @inproceedings{SagnolHegeWeiser, author = {Sagnol, Guillaume and Hege, Hans-Christian and Weiser, Martin}, title = {Using sparse kernels to design computer experiments with tunable precision}, series = {22nd Intern. Conf. on Computational Statistics - COMPSTAT 2016, Oviedo, Spain, 23-26 August 2016, Proceedings ISBN 978-90-73592-36-0}, booktitle = {22nd Intern. Conf. on Computational Statistics - COMPSTAT 2016, Oviedo, Spain, 23-26 August 2016, Proceedings ISBN 978-90-73592-36-0}, pages = {397 -- 408}, language = {en} } @misc{SagnolHegeWeiser, author = {Sagnol, Guillaume and Hege, Hans-Christian and Weiser, Martin}, title = {Using sparse kernels to design computer experiments with tunable precision}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-59605}, abstract = {Statistical methods to design computer experiments usually rely on a Gaussian process (GP) surrogate model, and typically aim at selecting design points (combinations of algorithmic and model parameters) that minimize the average prediction variance, or maximize the prediction accuracy for the hyperparameters of the GP surrogate. In many applications, experiments have a tunable precision, in the sense that one software parameter controls the tradeoff between accuracy and computing time (e.g., mesh size in FEM simulations or number of Monte-Carlo samples). We formulate the problem of allocating a budget of computing time over a finite set of candidate points for the goals mentioned above. This is a continuous optimization problem, which is moreover convex whenever the tradeoff function accuracy vs. computing time is concave. On the other hand, using non-concave weight functions can help to identify sparse designs. In addition, using sparse kernel approximations drastically reduce the cost per iteration of the multiplicative weights updates that can be used to solve this problem.}, language = {en} }