@article{PetkovicKochZittel2021, author = {Petkovic, Milena and Koch, Thorsten and Zittel, Janina}, title = {Deep learning for spatio-temporal supply anddemand forecasting in natural gas transmission networks}, journal = {Energy Science and Engineering}, doi = {https://doi.org/10.1002/ese3.932}, year = {2021}, abstract = {Germany is the largest market for natural gas in the European Union, with an annual consumption of approx. 95 billion cubic meters. Germany's high-pressure gas pipeline network is roughly 40,000 km long, which enables highly fluctuating quantities of gas to be transported safely over long distances. Considering that similar amounts of gas are also transshipped through Germany to other EU states, it is clear that Germany's gas transport system is essential to the European energy supply. Since the average velocity of gas in a pipeline is only 25km/h, an adequate high-precision, high-frequency forecasting of supply and demand is crucial for efficient control and operation of such a transmission network. We propose a deep learning model based on spatio-temporal convolutional neural networks (DLST) to tackle the problem of gas flow forecasting in a complex high-pressure transmission network. Experiments show that our model effectively captures comprehensive spatio-temporal correlations through modeling gas networks and consistently outperforms state-of-the-art benchmarks on real-world data sets by at least 21\%. The results demonstrate that the proposed model can deal with complex nonlinear gas network flow forecasting with high accuracy and effectiveness.}, language = {en} } @misc{PedersenHoppmannBaumZitteletal.2021, author = {Pedersen, Jaap and Hoppmann-Baum, Kai and Zittel, Janina and Koch, Thorsten}, title = {Blending hydrogen into natural gas: An assessment of the capacity of the German gas grid; Technical Report}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-82838}, year = {2021}, abstract = {In the transition towards a pure hydrogen infrastructure, utilizing the existing natural gas infrastructure is a necessity. In this study, the maximal technically feasible injection of hydrogen into the existing German natural gas transmission network is analysed with respect to regulatory limits regarding the gas quality. We propose a transient tracking model based on the general pooling problem including linepack. The analysis is conducted using real-world hourly gas flow data on a network of about 10,000 km length.}, language = {en} } @article{HenningsAndersonHoppmannBaumetal.2021, author = {Hennings, Felix and Anderson, Lovis and Hoppmann-Baum, Kai and Turner, Mark and Koch, Thorsten}, title = {Controlling transient gas flow in real-world pipeline intersection areas}, volume = {22}, journal = {Optimization and Engineering}, edition = {2}, publisher = {Springer Nature}, doi = {https://doi.org/10.1007/s11081-020-09559-y}, pages = {687 -- 734}, year = {2021}, abstract = {Compressor stations are the heart of every high-pressure gas transport network. Located at intersection areas of the network they are contained in huge complex plants, where they are in combination with valves and regulators responsible for routing and pushing the gas through the network. Due to their complexity and lack of data compressor stations are usually dealt with in the scientific literature in a highly simplified and idealized manner. As part of an ongoing project with one of Germany's largest Transmission System Operators to develop a decision support system for their dispatching center, we investigated how to automatize control of compressor stations. Each station has to be in a particular configuration, leading in combination with the other nearby elements to a discrete set of up to 2000 possible feasible operation modes in the intersection area. Since the desired performance of the station changes over time, the configuration of the station has to adapt. Our goal is to minimize the necessary changes in the overall operation modes and related elements over time, while fulfilling a preset performance envelope or demand scenario. This article describes the chosen model and the implemented mixed integer programming based algorithms to tackle this challenge. By presenting extensive computational results on real world data we demonstrate the performance of our approach.}, language = {en} } @misc{HoppmannHenningsLenzetal.2019, author = {Hoppmann, Kai and Hennings, Felix and Lenz, Ralf and Gotzes, Uwe and Heinecke, Nina and Spreckelsen, Klaus and Koch, Thorsten}, title = {Optimal Operation of Transient Gas Transport Networks}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-73639}, year = {2019}, language = {en} } @article{XuChenZhangetal.2021, author = {Xu, Xiaofei and Chen, Ying and Zhang, Ge and Koch, Thorsten}, title = {Modeling functional time series and mixed-type predictors with partially functional autoregressions*}, journal = {Journal of Business and Economic Statistics}, doi = {10.1080/07350015.2021.2011299}, pages = {1 -- 43}, year = {2021}, abstract = {In many business and economics studies, researchers have sought to measure the dynamic dependence of curves with high-dimensional mixed-type predictors. We propose a partially functional autoregressive model (pFAR) where the serial dependence of curves is controlled by coefficient operators that are defined on a two-dimensional surface, and the individual and group effects of mixed-type predictors are estimated with a two-layer regularization. We develop an efficient estimation with the proven asymptotic properties of consistency and sparsity. We show how to choose the sieve and tuning parameters in regularization based on a forward-looking criterion. In addition to the asymptotic properties, numerical validation suggests that the dependence structure is accurately detected. The implementation of the pFAR within a real-world analysis of dependence in German daily natural gas flow curves, with seven lagged curves and 85 scalar predictors, produces superior forecast accuracy and an insightful understanding of the dynamics of natural gas supply and demand for the municipal, industry, and border nodes, respectively.}, language = {en} } @article{ShinanoAchterbergBertholdetal.2013, author = {Shinano, Yuji and Achterberg, Tobias and Berthold, Timo and Heinz, Stefan and Koch, Thorsten and Vigerske, Stefan and Winkler, Michael}, title = {制約整数計画ソルバ SCIP の並列化}, volume = {61}, journal = {統計数理}, number = {1}, pages = {47 -- 78}, year = {2013}, abstract = {制約整数計画(CIP: Constraint Integer Programs)は,制約プログラミング(CP: Constraint Programming),混合整数計画(MIP: Mixed Integer Programming),充足可能性問題(SAT: Satisfability Problem)の研究分野におけるモデリング技術と解法を統合している.その結果,制約整数計画は,広いクラスの最適化問題を扱うことができる.SCIP(Solving Constraint Integer Programs)は,CIP を解くソルバとして実装され,Zuse Institute Berlin(ZIB)の研究者を中心として継続的に拡張が続けられている.本論文では,著者らによって開発された SCIP に対する2 種類の並列化拡張を紹介する.一つは,複数計算ノード間で大規模に並列動作する ParaSCIPである.もう一つは,複数コアと共有メモリを持つ 1 台の計算機上で(スレッド)並列で動作する FiberSCIP である.ParaSCIP は,HLRN II スーパーコンピュータ上で,一つのインスタンスを解くために最大 7,168 コアを利用した動作実績がある.また,統計数理研究所の Fujitsu PRIMERGY RX200S5 上でも,最大 512 コアを利用した動作実績がある.統計数理研究所のFujitsu PRIMERGY RX200S5 上では,これまでに最適解が得られていなかった MIPLIB2010のインスタンスである dg012142 に最適解を与えた.}, language = {ja} } @article{LeKoch2023, author = {Le, Thi Thai and Koch, Thorsten}, title = {Effect of inertia force on the interface stability of a tangential-velocity discontinuity in porous media}, volume = {169}, journal = {International Journal of Multiphase Flow}, doi = {10.1016/j.ijmultiphaseflow.2023.104612}, year = {2023}, abstract = {The present study investigates the stability of a tangential-velocity discontinuity in porous media during the withdrawing and injecting processes of natural gases from and into an underground gas storage. The focus is placed on analyzing the impact of inertia forces on the interface stability using the Forchheimer equations. Other publications have relied primarily on Darcy's law to describe flow stability in porous media. However, Darcy's law only adequately describes flows in which viscous forces dominate over inertia forces. As the flow rate increases, the significance of inertia forces becomes more pronounced, and Darcy's law becomes insufficient for considering such flows. Our findings indicate that even a slight consideration of the inertia effect leads to permanent destabilization of the discontinuity interface, regardless of the fluid viscosity or the Mach number. In contrast, when the inertia effect is neglected, the interface is stabilized across the entire Mach number range if the fluid viscosity is strong enough.}, language = {en} } @article{LeFukumotoKoch2024, author = {Le, Thi Thai and Fukumoto, Yasuhide and Koch, Thorsten}, title = {Linear stability of a simple shear layer between two parallel streams in a shallow water flow}, volume = {493}, journal = {Physics Letters A}, publisher = {Elservier}, doi = {10.1016/j.physleta.2023.129264}, year = {2024}, abstract = {The stability of shear layers in fluid flows is a crucial factor in forming vortices and jets and plays a fundamental role in the development of turbulence. Such shear layer instabilities are ubiquitous in natural phenomena, such as atmospheric and oceanic flows, contributing to the formation of weather systems and predicting tsunamis. This study specifically focuses on the stability of a shear layer sandwiched between two semi-infinite layers within a two-dimensional flow. The velocity profile of the shear layer is assumed to be linearly dependent on the vertical coordinate, while the velocity of the other layers remains uniform with differing strengths. The effect of viscosity and surface tension is ignored to simplify the analysis. The shallow water equations are used to analyze the interface stability of the shear layer, and the resulting dispersion relation between wave frequency and other wave characteristics is obtained. This relation incorporates Whittaker functions and their first derivatives and is used to derive appropriate limits corresponding to various physical conditions. Our study thus contributes to a deeper understanding of the stability of shear layers and their implications for natural phenomena.}, language = {en} } @article{LeKoch2021, author = {Le, Thi Thai and Koch, Thorsten}, title = {Instability of a tangential discontinuity surface in a three-dimensional compressible medium}, volume = {33}, journal = {Physics of Fluids}, number = {1}, doi = {10.1063/5.0033753}, pages = {016106}, year = {2021}, abstract = {Compressible flows appear in many natural and technological processes, for instance, the flow of natural gases in a pipe system. Thus, a detailed study of the stability of tangential velocity discontinuity in compressible media is relevant and necessary. The first early investigation in two-dimensional (2D) media was given more than 70 years ago. In this article, we continue investigating the stability in three-dimensional (3D) media. The idealized statement of this problem in an infinite spatial space was studied by Syrovatskii in 1954. However, the omission of the absolute sign of cos θ with θ being the angle between vectors of velocity and wave number in a certain inequality produced the inaccurate conclusion that the flow is always unstable for entire values of the Mach number M. First, we revisit this case to arrive at the correct conclusion, namely that the discontinuity surface is stabilized for a large Mach number with a given value of the angle θ. Next, we introduce a real finite spatial system such that it is bounded by solid walls along the flow direction. We show that the discontinuity surface is stable if and only if the dispersion relation equation has only real roots, with a large value of the Mach number; otherwise, the surface is always unstable. In particular, we show that a smaller critical value of the Mach number is required to make the flow in a narrow channel stable.}, language = {en} } @misc{ShinanoAchterbergBertholdetal.2020, author = {Shinano, Yuji and Achterberg, Tobias and Berthold, Timo and Heinz, Stefan and Koch, Thorsten and Winkler, Michael}, title = {Solving Previously Unsolved MIP Instances with ParaSCIP on Supercomputers by using up to 80,000 Cores}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-78393}, year = {2020}, abstract = {Mixed-integer programming (MIP) problem is arguably among the hardest classes of optimization problems. This paper describes how we solved 21 previously unsolved MIP instances from the MIPLIB benchmark sets. To achieve these results we used an enhanced version of ParaSCIP, setting a new record for the largest scale MIP computation: up to 80,000 cores in parallel on the Titan supercomputer. In this paper, we describe the basic parallelization mechanism of ParaSCIP, improvements of the dynamic load balancing and novel techniques to exploit the power of parallelization for MIP solving. We give a detailed overview of computing times and statistics for solving open MIPLIB instances.}, language = {en} } @misc{ShinanoAchterbergBertholdetal.2013, author = {Shinano, Yuji and Achterberg, Tobias and Berthold, Timo and Heinz, Stefan and Koch, Thorsten and Vigerske, Stefan and Winkler, Michael}, title = {制約整数計画ソルバ SCIP の並列化}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-18130}, year = {2013}, abstract = {制約整数計画(CIP: Constraint Integer Programming)は,制約プログラミング(CP: Constraint Programming),混合整数計画(MIP: Mixed Integer Programming), 充足可能性問題(SAT: Satisfiability Problems)の研究分野におけるモデリング技術と解法を統合している.その結果,制約整数計画は,広いクラスの最適化問題を扱うことができる.SCIP (Solving Constraint Integer Programs)は,CIPを解くソルバとして実装され,Zuse Institute Berlin (ZIB)の研究者を中心として継続的に拡張が続けられている.本論文では,著者らによって開発されたSCIP に対する2種類の並列化拡張を紹介する. 一つは,複数計算ノード間で大規模に並列動作するParaSCIP である. もう一つは,複数コアと共有メモリを持つ1台の計算機上で(スレッド)並列で動作するFiberSCIP である. ParaSCIP は,HLRN IIスーパーコンピュータ上で, 一つのインスタンスを解くために最大7,168 コアを利用した動作実績がある.また,統計数理研究所のFujitsu PRIMERGY RX200S5上でも,最大512コアを利用した動作実績がある.統計数理研究所のFujitsu PRIMERGY RX200S5上 では,これまでに最適解が得られていなかったMIPLIB2010のインスタンスであるdg012142に最適解を与えた.}, language = {ja} } @misc{BertholdHendelKoch2016, author = {Berthold, Timo and Hendel, Gregor and Koch, Thorsten}, title = {The Three Phases of MIP Solving}, issn = {1438-0064}, doi = {10.1080/10556788.2017.1392519}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-61607}, year = {2016}, abstract = {Modern MIP solvers employ dozens of auxiliary algorithmic components to support the branch-and-bound search in finding and improving primal solutions and in strengthening the dual bound. Typically, all components are tuned to minimize the average running time to prove optimality. In this article, we take a different look at the run of a MIP solver. We argue that the solution process consists of three different phases, namely achieving feasibility, improving the incumbent solution, and proving optimality. We first show that the entire solving process can be improved by adapting the search strategy with respect to the phase-specific aims using different control tunings. Afterwards, we provide criteria to predict the transition between the individual phases and evaluate the performance impact of altering the algorithmic behavior of the MIP solver SCIP at the predicted phase transition points.}, language = {en} } @article{ShimadaMakoYaegashietal.2025, author = {Shimada, Naoki and Mako, Sato and Yaegashi, Yuta and Koch, Thorsten and Le, Thi Thai}, title = {An Application of Modified S-CLSVOF Method to Kelvin-Helmholtz Instability and Comparison with Theoretical Result}, volume = {58}, journal = {Journal of Chemical Engineering of Japan}, number = {1}, publisher = {Taylor and Francis}, doi = {10.1080/00219592.2025.2451953}, year = {2025}, abstract = {This study focuses on validating a two-phase flow solver based on the modified Simple Coupled Level Set and Volume of Fluid method (Uchihashi et al. (2023)) through viscous Kelvin-Helmholtz instability simulations. Our numerical simulation results are compared with the ones given by Funada and Joseph (2001) to provide reliable predictions of interface behavior under the influence of viscosity. The primary goal is to accurately assess the solver's ability to replicate theoretical analysis of interface behaviors under various conditions. First, the wave between two fluids of identical density is calculated. In addition, the effect of surface tension is investigated. By comparing growth rates, numerical simulations obtain well-agreements with the analytical results on the effect of the fluid viscosity, the wave number, and the surface tension. Finally, fluid density is changed to an air-water system. When relative velocity U is smaller than the criteria of relative velocity U_c given by analytical solutions, the wave is not broken. However, waves are splashed into droplets in the condition of U>U_c. This result agrees with the analysis by Funada and Joseph (2001). These findings provide a robust framework for applying the solver to more complex two-phase flow problems, supporting advancements in numerical simulations of fluid interfaces.}, language = {en} } @article{SatoKochLe2026, author = {Sato, Mako and Koch, Thorsten and Le, Thi Thai}, title = {Influence of frictional drag on Kelvin-Helmholtz instability in viscous fluids}, volume = {38}, journal = {Physics of Fluids}, number = {1}, publisher = {AIP Publishing}, address = {Physics of Fluids}, doi = {10.1063/5.0306177}, year = {2026}, abstract = {The Kelvin-Helmholtz instability arises at the interface between two fluid layers with a tangential velocity discontinuity, significantly impacting the safety of systems in industrial applications. Despite extensive studies, many theoretical analyses neglect viscosity and frictional drag due to the complexity of solving the dispersion equation. However, including these effects is crucial, as viscosity alters the growth rate of the instability, while frictional drag influences energy dissipation and momentum transfer. In this study, these effects are incorporated into both finite and infinite flows. The assumption of a potential flow combined with a dissipation method is employed to derive the dispersion equation, providing a more tractable approach than direct calculation methods. The results indicate that, in the case of infinite flows, the frictional drag suppresses the growth of the instability for long waves (small wavenumber k) but enhances it for short waves (large k). In contrast, the surface tension dominates, while the frictional drag only slightly affects the growth rate in the case of finite flows bounded by solid walls.}, language = {en} }