@article{GoubergritsSpulerSchalleretal.2014, author = {Goubergrits, Leonid and Spuler, Andreas and Schaller, Jens and Wiegmann, Nils and Berthe, Andre and Hege, Hans-Christian and Affeld, Klaus and Kertzscher, Ulrich}, title = {In vitro study of hemodynamic treatment improvement: Hunterian ligation of a fenestrated basilar artery aneurysm after coiling}, series = {The International Journal of Artificial Organs}, volume = {37}, journal = {The International Journal of Artificial Organs}, number = {4}, doi = {10.5301/ijao.5000314}, pages = {325 -- 335}, year = {2014}, abstract = {Hunterian ligation affecting hemodynamics in vessels was proposed to avoid rebleeding in a case of a fenestrated basilar artery aneurysm after incomplete coil occlusion. We studied the hemodynamics in vitro to predict the hemodynamic changes near the aneurysm remnant caused by Hunterian ligation. A transparent model was fabricated based on three-dimensional rotational angiography imaging. Arteries were segmented and reconstructed. Pulsatile flow in the artery segments near the partially occluded (coiled) aneurysm was investigated by means of particle image velocimetry. The hemodynamic situation was investigated before and after Hunterian ligation of either the left or the right vertebral artery (LVA/RVA). Since post-ligation flow rate in the basilar artery was unknown, reduced and retained flow rates were simulated for both ligation options. Flow in the RVA and in the corresponding fenestra vessel is characterized by a vortex at the vertebrobasilar junction, whereas the LVA exhibits undisturbed laminar flow. Both options (RVA or LVA ligation) cause a significant flow reduction near the aneurysm remnant with a retained flow rate. The impact of RVA ligation is, however, significantly higher. This in vitro case study shows that flow reduction near the aneurysm remnant can be achieved by Hunterian ligation and that this effect depends largely on the selection of the ligated vessel. Thus the ability of the proposed in vitro pipe-line to improve hemodynamic impact of the proposed therapy was successfully proved.}, language = {en} } @inproceedings{StoppelHegeWiebel, author = {Stoppel, Sergej and Hege, Hans-Christian and Wiebel, Alexander}, title = {Visibility-driven depth determination of surface patches in direct volume rendering}, series = {EuroVis - Short Papers 2014}, booktitle = {EuroVis - Short Papers 2014}, doi = {10.2312/eurovisshort.20141164}, pages = {97 -- 101}, abstract = {This paper presents an algorithm called surfseek for selecting surfaces on the most visible features in direct volume rendering (DVR). The algorithm is based on a previously published technique (WYSIWYP) for picking 3D locations in DVR. The new algorithm projects a surface patch on the DVR image, consisting of multiple rays. For each ray the algorithm uses WYSIWYP or a variant of it to find the candidates for the most visible locations along the ray. Using these candidates the algorithm constructs a graph and computes a minimum cut on this graph. The minimum cut represents a visible and typically rather smooth surface. In the last step the selected surface is displayed. We provide examples for results using artificially generated and real-world data sets.}, language = {en} } @article{GoubergritsHellmeierBrueningetal., author = {Goubergrits, Leonid and Hellmeier, Florian and Bruening, Jan Joris and Spuler, Andreas and Hege, Hans-Christian and Voss, Samuel and Janiga, G{\´a}bor and Saalfeld, Sylvia and Beuing, Oliver and Berg, Philipp}, title = {Multiple Aneurysms AnaTomy CHallenge 2018 (MATCH): Uncertainty Quantification of Geometric Rupture Risk Parameters}, series = {BioMedical Engineering OnLine}, volume = {18}, journal = {BioMedical Engineering OnLine}, number = {35}, doi = {10.1186/s12938-019-0657-y}, abstract = {Background Geometric parameters have been proposed for prediction of cerebral aneurysm rupture risk. Predicting the rupture risk for incidentally detected unruptured aneurysms could help clinicians in their treatment decision. However, assessment of geometric parameters depends on several factors, including the spatial resolution of the imaging modality used and the chosen reconstruction procedure. The aim of this study was to investigate the uncertainty of a variety of previously proposed geometric parameters for rupture risk assessment, caused by variability of reconstruction procedures. Materials 26 research groups provided segmentations and surface reconstructions of five cerebral aneurysms as part of the Multiple Aneurysms AnaTomy CHallenge (MATCH) 2018. 40 dimensional and non-dimensional geometric parameters, describing aneurysm size, neck size, and irregularity of aneurysm shape, were computed. The medians as well as the absolute and relative uncertainties of the parameters were calculated. Additionally, linear regression analysis was performed on the absolute uncertainties and the median parameter values. Results A large variability of relative uncertainties in the range between 3.9 and 179.8\% was found. Linear regression analysis indicates that some parameters capture similar geometric aspects. The lowest uncertainties < 6\% were found for the non-dimensional parameters isoperimetric ratio, convexity ratio, and ellipticity index. Uncertainty of 2D and 3D size parameters was significantly higher than uncertainty of 1D parameters. The most extreme uncertainties > 80\% were found for some curvature parameters. Conclusions Uncertainty analysis is essential on the road to clinical translation and use of rupture risk prediction models. Uncertainty quantification of geometric rupture risk parameters provided by this study may help support development of future rupture risk prediction models.}, language = {en} } @article{FroehlerElberfeldMoelleretal., author = {Fr{\"o}hler, Bernhard and Elberfeld, Tim and M{\"o}ller, Torsten and Hege, Hans-Christian and Weissenb{\"o}ck, Johannes and De Beenhouwer, Jan and Sijbers, Jan and Kastner, Johann and Heinzl, Christoph}, title = {A Visual Tool for the Analysis of Algorithms for Tomographic Fiber Reconstruction in Materials Science}, series = {Computer Graphics Forum}, volume = {38}, journal = {Computer Graphics Forum}, number = {3}, doi = {10.1111/cgf.13688}, pages = {273 -- 283}, abstract = {We present visual analysis methods for the evaluation of tomographic fiber reconstruction algorithms by means of analysis, visual debugging and comparison of reconstructed fibers in materials science. The methods are integrated in a tool (FIAKER) that supports the entire workflow. It enables the analysis of various fiber reconstruction algorithms, of differently parameterized fiber reconstruction algorithms and of individual steps in iterative fiber reconstruction algorithms. Insight into the performance of fiber reconstruction algorithms is obtained by a list-based ranking interface. A 3D view offers interactive visualization techniques to gain deeper insight, e.g., into the aggregated quality of the examined fiber reconstruction algorithms and parameterizations. The tool was designed in close collaboration with researchers who work with fiber-reinforced polymers on a daily basis and develop algorithms for tomographic reconstruction and characterization of such materials. We evaluate the tool using synthetic datasets as well as tomograms of real materials. Five case studies certify the usefulness of the tool, showing that it significantly accelerates the analysis and provides valuable insights that make it possible to improve the fiber reconstruction algorithms. The main contribution of the paper is the well-considered combination of methods and their seamless integration into a visual tool that supports the entire workflow. Further findings result from the analysis of (dis-)similarity measures for fibers as well as from the discussion of design decisions. It is also shown that the generality of the analytical methods allows a wider range of applications, such as the application in pore space analysis.}, language = {en} } @misc{NavaYazdaniHegevonTycowicz, author = {Nava-Yazdani, Esfandiar and Hege, Hans-Christian and von Tycowicz, Christoph}, title = {A Geodesic Mixed Effects Model in Kendall's Shape Space}, series = {Proc. 7th MICCAI workshop on Mathematical Foundations of Computational Anatomy (MFCA)}, journal = {Proc. 7th MICCAI workshop on Mathematical Foundations of Computational Anatomy (MFCA)}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-74621}, abstract = {In many applications, geodesic hierarchical models are adequate for the study of temporal observations. We employ such a model derived for manifold-valued data to Kendall's shape space. In particular, instead of the Sasaki metric, we adapt a functional-based metric, which increases the computational efficiency and does not require the implementation of the curvature tensor. We propose the corresponding variational time discretization of geodesics and apply the approach for the estimation of group trends and statistical testing of 3D shapes derived from an open access longitudinal imaging study on osteoarthritis.}, language = {en} } @inproceedings{HanikHegevonTycowicz, author = {Hanik, Martin and Hege, Hans-Christian and von Tycowicz, Christoph}, title = {Bi-invariant Two-Sample Tests in Lie Groups for Shape Analysis}, series = {Shape in Medical Imaging}, booktitle = {Shape in Medical Imaging}, publisher = {Springer International Publishing}, address = {Cham}, doi = {10.1007/978-3-030-61056-2_4}, pages = {44 -- 54}, abstract = {We propose generalizations of the T²-statistics of Hotelling and the Bhattacharayya distance for data taking values in Lie groups. A key feature of the derived measures is that they are compatible with the group structure even for manifolds that do not admit any bi-invariant metric. This property, e.g., assures analysis that does not depend on the reference shape, thus, preventing bias due to arbitrary choices thereof. Furthermore, the generalizations agree with the common definitions for the special case of flat vector spaces guaranteeing consistency. Employing a permutation test setup, we further obtain nonparametric, two-sample testing procedures that themselves are bi-invariant and consistent. We validate our method in group tests revealing significant differences in hippocampal shape between individuals with mild cognitive impairment and normal controls.}, language = {en} } @inproceedings{HanikHegeHennemuthetal., author = {Hanik, Martin and Hege, Hans-Christian and Hennemuth, Anja and von Tycowicz, Christoph}, title = {Nonlinear Regression on Manifolds for Shape Analysis using Intrinsic B{\´e}zier Splines}, series = {Proc. Medical Image Computing and Computer Assisted Intervention (MICCAI)}, booktitle = {Proc. Medical Image Computing and Computer Assisted Intervention (MICCAI)}, publisher = {Springer International Publishing}, address = {Cham}, doi = {10.1007/978-3-030-59719-1_60}, pages = {617 -- 626}, abstract = {Intrinsic and parametric regression models are of high interest for the statistical analysis of manifold-valued data such as images and shapes. The standard linear ansatz has been generalized to geodesic regression on manifolds making it possible to analyze dependencies of random variables that spread along generalized straight lines. Nevertheless, in some scenarios, the evolution of the data cannot be modeled adequately by a geodesic. We present a framework for nonlinear regression on manifolds by considering Riemannian splines, whose segments are B{\´e}zier curves, as trajectories. Unlike variational formulations that require time-discretization, we take a constructive approach that provides efficient and exact evaluation by virtue of the generalized de Casteljau algorithm. We validate our method in experiments on the reconstruction of periodic motion of the mitral valve as well as the analysis of femoral shape changes during the course of osteoarthritis, endorsing B{\´e}zier spline regression as an effective and flexible tool for manifold-valued regression.}, language = {en} } @article{NavaYazdaniHegeSullivanetal., author = {Nava-Yazdani, Esfandiar and Hege, Hans-Christian and Sullivan, T. J. and von Tycowicz, Christoph}, title = {Geodesic Analysis in Kendall's Shape Space with Epidemiological Applications}, series = {Journal of Mathematical Imaging and Vision}, volume = {62}, journal = {Journal of Mathematical Imaging and Vision}, number = {4}, doi = {10.1007/s10851-020-00945-w}, pages = {549 -- 559}, abstract = {We analytically determine Jacobi fields and parallel transports and compute geodesic regression in Kendall's shape space. Using the derived expressions, we can fully leverage the geometry via Riemannian optimization and thereby reduce the computational expense by several orders of magnitude over common, nonlinear constrained approaches. The methodology is demonstrated by performing a longitudinal statistical analysis of epidemiological shape data. As an example application we have chosen 3D shapes of knee bones, reconstructed from image data of the Osteoarthritis Initiative (OAI). Comparing subject groups with incident and developing osteoarthritis versus normal controls, we find clear differences in the temporal development of femur shapes. This paves the way for early prediction of incident knee osteoarthritis, using geometry data alone.}, language = {en} } @inproceedings{NavaYazdaniHegevonTycowicz, author = {Nava-Yazdani, Esfandiar and Hege, Hans-Christian and von Tycowicz, Christoph}, title = {A Geodesic Mixed Effects Model in Kendall's Shape Space}, series = {Proc. 7th MICCAI workshop on Mathematical Foundations of Computational Anatomy (MFCA)}, volume = {11846}, booktitle = {Proc. 7th MICCAI workshop on Mathematical Foundations of Computational Anatomy (MFCA)}, doi = {10.1007/978-3-030-33226-6_22}, pages = {209 -- 218}, abstract = {In many applications, geodesic hierarchical models are adequate for the study of temporal observations. We employ such a model derived for manifold-valued data to Kendall's shape space. In particular, instead of the Sasaki metric, we adapt a functional-based metric, which increases the computational efficiency and does not require the implementation of the curvature tensor. We propose the corresponding variational time discretization of geodesics and apply the approach for the estimation of group trends and statistical testing of 3D shapes derived from an open access longitudinal imaging study on osteoarthritis.}, language = {en} } @article{AgudoJacomeHegePaetschetal., author = {Agudo J{\´a}come, Leonardo and Hege, Hans-Christian and Paetsch, Olaf and P{\"o}thkow, Kai}, title = {Three-dimensional reconstruction and quantification of dislocation substructures from transmission electron microscopy stereo pairs}, series = {Ultramicroscopy}, volume = {195}, journal = {Ultramicroscopy}, doi = {10.1016/j.ultramic.2018.08.015}, pages = {157 -- 170}, abstract = {A great amount of material properties is strongly influenced by dislocations, the carriers of plastic deformation. It is therefore paramount to have appropriate tools to quantify dislocation substructures with regard to their features, e.g., dislocation density, Burgers vectors or line direction. While the transmission electron microscope (TEM) has been the most widely-used equipment implemented to investigate dislocations, it usually is limited to the two-dimensional (2D) observation of three-dimensional (3D) structures. We reconstruct, visualize and quantify 3D dislocation substructure models from only two TEM images (stereo pairs) and assess the results. The reconstruction is based on the manual interactive tracing of filiform objects on both images of the stereo pair. The reconstruction and quantification method are demonstrated on dark field (DF) scanning (S)TEM micrographs of dislocation substructures imaged under diffraction contrast conditions. For this purpose, thick regions (>300 nm) of TEM foils are analyzed, which are extracted from a Ni-base superalloy single crystal after high temperature creep deformation. It is shown how the method allows 3D quantification from stereo pairs in a wide range of tilt conditions, achieving line length and orientation uncertainties of 3\% and 7°, respectively. Parameters that affect the quality of such reconstructions are discussed.}, language = {en} }