@misc{Hennings, author = {Hennings, Felix}, title = {Benefits and Limitations of Simplified Transient Gas Flow Formulations}, issn = {1438-0064}, doi = {10.1007/978-3-319-89920-6_32}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-64570}, abstract = {Although intensively studied in recent years, the optimization of the transient (time-dependent) control of large real-world gas networks is still out of reach for current state-of-the-art approaches. For this reason, we present further simplifications of the commonly used model, which lead to a linear description of the gas flow on pipelines. In an empirical analysis of real-world data, we investigate the properties of the involved quantities and evaluate the errors made by our simplification.}, language = {en} } @inproceedings{Hennings, author = {Hennings, Felix}, title = {Benefits and Limitations of Simplified Transient Gas Flow Formulations}, series = {Operations Research Proceedings 2017}, volume = {Operations Research Proceedings}, booktitle = {Operations Research Proceedings 2017}, publisher = {Springer, Cham}, doi = {10.1007/978-3-319-89920-6_32}, pages = {231 -- 237}, abstract = {Although intensively studied in recent years, the optimization of the transient (time-dependent) control of large real-world gas networks is still out of reach for current state-of-the-art approaches. For this reason, we present further simplifications of the commonly used model, which lead to a linear description of the gas flow on pipelines. In an empirical analysis of real-world data, we investigate the properties of the involved quantities and evaluate the errors made by our simplification.}, language = {en} } @misc{YuekselErguenZittelWangetal., author = {Yueksel-Erguen, Inci and Zittel, Janina and Wang, Ying and Hennings, Felix and Koch, Thorsten}, title = {Lessons learned from gas network data preprocessing}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-78262}, abstract = {The German high-pressure natural gas transport network consists of thousands of interconnected elements spread over more than 120,000 km of pipelines built during the last 100 years. During the last decade, we have spent many person-years to extract consistent data out of the available sources, both public and private. Based on two case studies, we present some of the challenges we encountered. Preparing consistent, high-quality data is surprisingly hard, and the effort necessary can hardly be overestimated. Thus, it is particularly important to decide which strategy regarding data curation to adopt. Which precision of the data is necessary? When is it more efficient to work with data that is just sufficiently correct on average? In the case studies we describe our experiences and the strategies we adopted to deal with the obstacles and to minimize future effort. Finally, we would like to emphasize that well-compiled data sets, publicly available for research purposes, provide the grounds for building innovative algorithmic solutions to the challenges of the future.}, language = {en} } @misc{HenningsAndersonHoppmannetal., author = {Hennings, Felix and Anderson, Lovis and Hoppmann, Kai and Turner, Mark and Koch, Thorsten}, title = {Controlling transient gas flow in real-world pipeline intersection areas}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-73645}, abstract = {Compressor stations are the heart of every high-pressure gas transport network. Located at intersection areas of the network they are contained in huge complex plants, where they are in combination with valves and regulators responsible for routing and pushing the gas through the network. Due to their complexity and lack of data compressor stations are usually dealt with in the scientific literature in a highly simplified and idealized manner. As part of an ongoing project with one of Germany's largest Transmission System Operators to develop a decision support system for their dispatching center, we investigated how to automatize control of compressor stations. Each station has to be in a particular configuration, leading in combination with the other nearby elements to a discrete set of up to 2000 possible feasible operation modes in the intersection area. Since the desired performance of the station changes over time, the configuration of the station has to adapt. Our goal is to minimize the necessary changes in the overall operation modes and related elements over time, while fulfilling a preset performance envelope or demand scenario. This article describes the chosen model and the implemented mixed integer programming based algorithms to tackle this challenge. By presenting extensive computational results on real world data we demonstrate the performance of our approach.}, language = {en} } @misc{HoppmannHenningsLenzetal., author = {Hoppmann, Kai and Hennings, Felix and Lenz, Ralf and Gotzes, Uwe and Heinecke, Nina and Spreckelsen, Klaus and Koch, Thorsten}, title = {Optimal Operation of Transient Gas Transport Networks}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-73639}, language = {en} } @article{HenningsAndersonHoppmannBaumetal., author = {Hennings, Felix and Anderson, Lovis and Hoppmann-Baum, Kai and Turner, Mark and Koch, Thorsten}, title = {Controlling transient gas flow in real-world pipeline intersection areas}, series = {Optimization and Engineering}, volume = {22}, journal = {Optimization and Engineering}, edition = {2}, publisher = {Springer Nature}, doi = {https://doi.org/10.1007/s11081-020-09559-y}, pages = {687 -- 734}, abstract = {Compressor stations are the heart of every high-pressure gas transport network. Located at intersection areas of the network they are contained in huge complex plants, where they are in combination with valves and regulators responsible for routing and pushing the gas through the network. Due to their complexity and lack of data compressor stations are usually dealt with in the scientific literature in a highly simplified and idealized manner. As part of an ongoing project with one of Germany's largest Transmission System Operators to develop a decision support system for their dispatching center, we investigated how to automatize control of compressor stations. Each station has to be in a particular configuration, leading in combination with the other nearby elements to a discrete set of up to 2000 possible feasible operation modes in the intersection area. Since the desired performance of the station changes over time, the configuration of the station has to adapt. Our goal is to minimize the necessary changes in the overall operation modes and related elements over time, while fulfilling a preset performance envelope or demand scenario. This article describes the chosen model and the implemented mixed integer programming based algorithms to tackle this challenge. By presenting extensive computational results on real world data we demonstrate the performance of our approach.}, language = {en} }