@article{TitschackBaumMatsuyamaetal.2018, author = {Titschack, J{\"u}rgen and Baum, Daniel and Matsuyama, Kei and Boos, Karin and F{\"a}rber, Claudia and Kahl, Wolf-Achim and Ehrig, Karsten and Meinel, Dietmar and Soriano, Carmen and Stock, Stuart R.}, title = {Ambient occlusion - a powerful algorithm to segment shell and skeletal intrapores in computed tomography data}, volume = {115}, journal = {Computers and Geosciences}, doi = {10.1016/j.cageo.2018.03.007}, pages = {75 -- 87}, year = {2018}, abstract = {During the last decades, X-ray (micro-)computed tomography has gained increasing attention for the description of porous skeletal and shell structures of various organism groups. However, their quantitative analysis is often hampered by the difficulty to discriminate cavities and pores within the object from the surrounding region. Herein, we test the ambient occlusion (AO) algorithm and newly implemented optimisations for the segmentation of cavities (implemented in the software Amira). The segmentation accuracy is evaluated as a function of (i) changes in the ray length input variable, and (ii) the usage of AO (scalar) field and other AO-derived (scalar) fields. The results clearly indicate that the AO field itself outperforms all other AO-derived fields in terms of segmentation accuracy and robustness against variations in the ray length input variable. The newly implemented optimisations improved the AO field-based segmentation only slightly, while the segmentations based on the AO-derived fields improved considerably. Additionally, we evaluated the potential of the AO field and AO-derived fields for the separation and classification of cavities as well as skeletal structures by comparing them with commonly used distance-map-based segmentations. For this, we tested the zooid separation within a bryozoan colony, the stereom classification of an ophiuroid tooth, the separation of bioerosion traces within a marble block and the calice (central cavity)-pore separation within a dendrophyllid coral. The obtained results clearly indicate that the ideal input field depends on the three-dimensional morphology of the object of interest. The segmentations based on the AO-derived fields often provided cavity separations and skeleton classifications that were superior to or impossible to obtain with commonly used distance- map-based segmentations. The combined usage of various AO-derived fields by supervised or unsupervised segmentation algorithms might provide a promising target for future research to further improve the results for this kind of high-end data segmentation and classification. Furthermore, the application of the developed segmentation algorithm is not restricted to X-ray (micro-)computed tomographic data but may potentially be useful for the segmentation of 3D volume data from other sources.}, language = {en} } @misc{TitschackBaumMatsuyamaetal.2018, author = {Titschack, J{\"u}rgen and Baum, Daniel and Matsuyama, Kei and Boos, Karin and F{\"a}rber, Claudia and Kahl, Wolf-Achim and Ehrig, Karsten and Meinel, Dietmar and Soriano, Carmen and Stock, Stuart R.}, title = {Ambient occlusion - a powerful algorithm to segment shell and skeletal intrapores in computed tomography data}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-67982}, year = {2018}, abstract = {During the last decades, X-ray (micro-)computed tomography has gained increasing attention for the description of porous skeletal and shell structures of various organism groups. However, their quantitative analysis is often hampered by the difficulty to discriminate cavities and pores within the object from the surrounding region. Herein, we test the ambient occlusion (AO) algorithm and newly implemented optimisations for the segmentation of cavities (implemented in the software Amira). The segmentation accuracy is evaluated as a function of (i) changes in the ray length input variable, and (ii) the usage of AO (scalar) field and other AO-derived (scalar) fields. The results clearly indicate that the AO field itself outperforms all other AO-derived fields in terms of segmentation accuracy and robustness against variations in the ray length input variable. The newly implemented optimisations improved the AO field-based segmentation only slightly, while the segmentations based on the AO-derived fields improved considerably. Additionally, we evaluated the potential of the AO field and AO-derived fields for the separation and classification of cavities as well as skeletal structures by comparing them with commonly used distance-map-based segmentations. For this, we tested the zooid separation within a bryozoan colony, the stereom classification of an ophiuroid tooth, the separation of bioerosion traces within a marble block and the calice (central cavity)-pore separation within a dendrophyllid coral. The obtained results clearly indicate that the ideal input field depends on the three-dimensional morphology of the object of interest. The segmentations based on the AO-derived fields often provided cavity separations and skeleton classifications that were superior to or impossible to obtain with commonly used distance- map-based segmentations. The combined usage of various AO-derived fields by supervised or unsupervised segmentation algorithms might provide a promising target for future research to further improve the results for this kind of high-end data segmentation and classification. Furthermore, the application of the developed segmentation algorithm is not restricted to X-ray (micro-)computed tomographic data but may potentially be useful for the segmentation of 3D volume data from other sources.}, language = {en} } @misc{KnoetelSeidelZaslanskyetal.2017, author = {Kn{\"o}tel, David and Seidel, Ronald and Zaslansky, Paul and Prohaska, Steffen and Dean, Mason N. and Baum, Daniel}, title = {Automated Segmentation of Complex Patterns in Biological Tissues: Lessons from Stingray Tessellated Cartilage (Supplementary Material)}, doi = {10.12752/4.DKN.1.0}, year = {2017}, abstract = {Supplementary data to reproduce and understand key results from the related publication, including original image data and processed data. In particular, sections from hyomandibulae harvested from specimens of round stingray Urobatis halleri, donated from another study (DOI: 10.1002/etc.2564). Specimens were from sub-adults/adults collected by beach seine from collection sites in San Diego and Seal Beach, California, USA. The hyomandibulae were mounted in clay, sealed in ethanol-humidified plastic tubes and scanned with a Skyscan 1172 desktop μCT scanner (Bruker μCT, Kontich, Belgium) in association with another study (DOI: 10.1111/joa.12508). Scans for all samples were performed with voxel sizes of 4.89 μm at 59 kV source voltage and 167 μA source current, over 360◦ sample 120 rotation. For our segmentations, the datasets were resampled to a voxel size of 9.78 μm to reduce the size of the images and speed up processing. In addition, the processed data that was generated with the visualization software Amira with techniques described in the related publication based on the mentioned specimens.}, language = {en} } @article{KramerNoackBaumetal.2018, author = {Kramer, Tobias and Noack, Matthias and Baum, Daniel and Hege, Hans-Christian and Heller, Eric J.}, title = {Dust and gas emission from cometary nuclei: the case of comet 67P/Churyumov-Gerasimenko}, volume = {3}, journal = {Advances in Physics: X}, number = {1}, doi = {10.1080/23746149.2017.1404436}, pages = {1404436}, year = {2018}, abstract = {Comets display with decreasing solar distance an increased emission of gas and dust particles, leading to the formation of the coma and tail. Spacecraft missions provide insight in the temporal and spatial variations of the dust and gas sources located on the cometary nucleus. For the case of comet 67P/Churyumov-Gerasimenko (67P/C-G), the long-term obser- vations from the Rosetta mission point to a homogeneous dust emission across the entire illuminated surface. Despite the homogeneous initial dis- tribution, a collimation in jet-like structures becomes visible. We propose that this observation is linked directly to the complex shape of the nucleus and projects concave topographical features into the dust coma. To test this hypothesis, we put forward a gas-dust description of 67P/C-G, where gravitational and gas forces are accurately determined from the surface mesh and the rotation of the nucleus is fully incorporated. The emerging jet-like structures persist for a wide range of gas-dust interactions and show a dust velocity dependent bending.}, language = {en} } @misc{Baum2019, author = {Baum, Daniel}, title = {An Evaluation of Color Maps for Visual Data Exploration}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-74259}, year = {2019}, language = {en} } @article{BaumWeaverZlotnikovetal.2019, author = {Baum, Daniel and Weaver, James C. and Zlotnikov, Igor and Kn{\"o}tel, David and Tomholt, Lara and Dean, Mason N.}, title = {High-Throughput Segmentation of Tiled Biological Structures using Random-Walk Distance Transforms}, journal = {Integrative And Comparative Biology}, doi = {10.1093/icb/icz117}, year = {2019}, abstract = {Various 3D imaging techniques are routinely used to examine biological materials, the results of which are usually a stack of grayscale images. In order to quantify structural aspects of the biological materials, however, they must first be extracted from the dataset in a process called segmentation. If the individual structures to be extracted are in contact or very close to each other, distance-based segmentation methods utilizing the Euclidean distance transform are commonly employed. Major disadvantages of the Euclidean distance transform, however, are its susceptibility to noise (very common in biological data), which often leads to incorrect segmentations (i.e. poor separation of objects of interest), and its limitation of being only effective for roundish objects. In the present work, we propose an alternative distance transform method, the random-walk distance transform, and demonstrate its effectiveness in high-throughput segmentation of three microCT datasets of biological tilings (i.e. structures composed of a large number of similar repeating units). In contrast to the Euclidean distance transform, this random-walk approach represents the global, rather than the local, geometric character of the objects to be segmented and, thus, is less susceptible to noise. In addition, it is directly applicable to structures with anisotropic shape characteristics. Using three case studies—stingray tessellated cartilage, starfish dermal endoskeleton, and the prismatic layer of bivalve mollusc shell—we provide a typical workflow for the segmentation of tiled structures, describe core image processing concepts that are underused in biological research, and show that for each study system, large amounts of biologically-relevant data can be rapidly segmented, visualized and analyzed.}, language = {en} } @article{MahnkeArltBaumetal.2020, author = {Mahnke, Heinz-Eberhard and Arlt, Tobias and Baum, Daniel and Hege, Hans-Christian and Herter, Felix and Lindow, Norbert and Manke, Ingo and Siopi, Tzulia and Menei, Eve and Etienne, Marc and Lepper, Verena}, title = {Virtual unfolding of folded papyri}, volume = {41}, journal = {Journal of Cultural Heritage}, publisher = {Elsevier}, doi = {10.1016/j.culher.2019.07.007}, pages = {264 -- 269}, year = {2020}, abstract = {The historical importance of ancient manuscripts is unique since they provide information about the heritage of ancient cultures. Often texts are hidden in rolled or folded documents. Due to recent impro- vements in sensitivity and resolution, spectacular disclosures of rolled hidden texts were possible by X-ray tomography. However, revealing text on folded manuscripts is even more challenging. Manual unfolding is often too risky in view of the fragile condition of fragments, as it can lead to the total loss of the document. X-ray tomography allows for virtual unfolding and enables non-destructive access to hid- den texts. We have recently demonstrated the procedure and tested unfolding algorithms on a mockup sample. Here, we present results on unfolding ancient papyrus packages from the papyrus collection of the Mus{\´e}e du Louvre, among them objects folded along approximately orthogonal folding lines. In one of the packages, the first identification of a word was achieved, the Coptic word for "Lord".}, language = {en} } @misc{MahnkeArltBaumetal.2019, author = {Mahnke, Heinz-Eberhard and Arlt, Tobias and Baum, Daniel and Hege, Hans-Christian and Herter, Felix and Lindow, Norbert and Manke, Ingo and Siopi, Tzulia and Menei, Eve and Etienne, Marc and Lepper, Verena}, title = {Virtual unfolding of folded papyri}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-74338}, year = {2019}, abstract = {The historical importance of ancient manuscripts is unique since they provide information about the heritage of ancient cultures. Often texts are hidden in rolled or folded documents. Due to recent impro- vements in sensitivity and resolution, spectacular disclosures of rolled hidden texts were possible by X-ray tomography. However, revealing text on folded manuscripts is even more challenging. Manual unfolding is often too risky in view of the fragile condition of fragments, as it can lead to the total loss of the document. X-ray tomography allows for virtual unfolding and enables non-destructive access to hid- den texts. We have recently demonstrated the procedure and tested unfolding algorithms on a mockup sample. Here, we present results on unfolding ancient papyrus packages from the papyrus collection of the Mus{\´e}e du Louvre, among them objects folded along approximately orthogonal folding lines. In one of the packages, the first identification of a word was achieved, the Coptic word for "Lord".}, language = {en} } @misc{BaumWeaverZlotnikovetal.2019, author = {Baum, Daniel and Weaver, James C. and Zlotnikov, Igor and Kn{\"o}tel, David and Tomholt, Lara and Dean, Mason N.}, title = {High-Throughput Segmentation of Tiled Biological Structures using Random-Walk Distance Transforms}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-73841}, year = {2019}, abstract = {Various 3D imaging techniques are routinely used to examine biological materials, the results of which are usually a stack of grayscale images. In order to quantify structural aspects of the biological materials, however, they must first be extracted from the dataset in a process called segmentation. If the individual structures to be extracted are in contact or very close to each other, distance-based segmentation methods utilizing the Euclidean distance transform are commonly employed. Major disadvantages of the Euclidean distance transform, however, are its susceptibility to noise (very common in biological data), which often leads to incorrect segmentations (i.e. poor separation of objects of interest), and its limitation of being only effective for roundish objects. In the present work, we propose an alternative distance transform method, the random-walk distance transform, and demonstrate its effectiveness in high-throughput segmentation of three microCT datasets of biological tilings (i.e. structures composed of a large number of similar repeating units). In contrast to the Euclidean distance transform, this random-walk approach represents the global, rather than the local, geometric character of the objects to be segmented and, thus, is less susceptible to noise. In addition, it is directly applicable to structures with anisotropic shape characteristics. Using three case studies—stingray tessellated cartilage, starfish dermal endoskeleton, and the prismatic layer of bivalve mollusc shell—we provide a typical workflow for the segmentation of tiled structures, describe core image processing concepts that are underused in biological research, and show that for each study system, large amounts of biologically-relevant data can be rapidly segmented, visualized and analyzed.}, language = {en} } @misc{BaumGiliardHasleretal.2019, author = {Baum, Daniel and Giliard, Nicole and Hasler, Tim and Peters-Kottig, Wolfgang}, title = {Leitlinien zum Umgang mit Forschungsdaten am Zuse-Institut Berlin}, address = {Berlin}, doi = {10.12752/7378}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-73781}, year = {2019}, abstract = {Die nachhaltige Sicherung und Bereitstellung von Forschungsdaten dienen nicht nur der Reproduzierbarkeit fr{\"u}herer Ergebnisse, sondern in hohem Maße auch der Erzielung k{\"u}nftiger Ergebnisse mit dem Ziel, die Qualit{\"a}t, Produktivit{\"a}t und Wettbewerbsf{\"a}higkeit der Wissenschaft zu f{\"o}rdern. Die folgenden Grunds{\"a}tze gelten als Leitlinien zur Handhabung von Forschungsdaten im ZIB.}, language = {de} } @incollection{Baum2019, author = {Baum, Daniel}, title = {An Evaluation of Color Maps for Visual Data Exploration}, booktitle = {Science in Color: Visualizing Achromatic Knowledge}, editor = {Bock von W{\"u}lfingen, Bettina}, publisher = {De Gruyter}, address = {Berlin}, pages = {147 -- 161}, year = {2019}, language = {en} } @misc{HombergBaumWiebeletal.2014, author = {Homberg, Ulrike and Baum, Daniel and Wiebel, Alexander and Prohaska, Steffen and Hege, Hans-Christian}, title = {Definition, Extraction, and Validation of Pore Structures in Porous Materials}, journal = {Topological Methods in Data Analysis and Visualization III}, editor = {Bremer, Peer-Timo and Hotz, Ingrid and Pascucci, Valerio and Peikert, Ronald}, publisher = {Springer}, doi = {10.1007/978-3-319-04099-8_15}, pages = {235 -- 248}, year = {2014}, language = {en} } @inproceedings{KlindtProhaskaBaumetal.2012, author = {Klindt, Marco and Prohaska, Steffen and Baum, Daniel and Hege, Hans-Christian}, title = {Conveying Archaeological Contexts to Museum Visitors: Case Study Pergamon Exhibition}, booktitle = {VAST12: The 13th International Symposium on Virtual Reality, Archaeology and Intelligent Cultural Heritage - Short Papers}, editor = {Arnold, David and Kaminski, Jaime and Niccolucci, Franco and Stork, Andre}, publisher = {Eurographics Association}, address = {Brighton, UK}, doi = {10.2312/PE/VAST/VAST12S/025-028}, pages = {25 -- 28}, year = {2012}, language = {en} } @inproceedings{KlindtBaumProhaskaetal.2012, author = {Klindt, Marco and Baum, Daniel and Prohaska, Steffen and Hege, Hans-Christian}, title = {iCon.text - a customizable iPad app for kiosk applications in museum exhibitions}, booktitle = {EVA 2012 Berlin}, publisher = {Gesellschaft zur F{\"o}rderung angewandter Informatik e.V.}, address = {Volmerstraße 3, 12489 Berlin}, pages = {150 -- 155}, year = {2012}, language = {en} } @article{LindowBaumBondaretal.2013, author = {Lindow, Norbert and Baum, Daniel and Bondar, Ana-Nicoleta and Hege, Hans-Christian}, title = {Exploring cavity dynamics in biomolecular systems}, volume = {14}, journal = {BMC Bioinformatics}, edition = {(Suppl 19):S5}, doi = {10.1186/1471-2105-14-S19-S5}, year = {2013}, language = {en} } @article{KratzBaumHotz2013, author = {Kratz, Andrea and Baum, Daniel and Hotz, Ingrid}, title = {Anisotropic Sampling of Planar and Two-Manifold Domains for Texture Generation and Glyph Distribution}, volume = {19}, journal = {Transactions on Visualization and Computer Graphics (TVCG)}, doi = {10.1109/TVCG.2013.83}, pages = {1782 -- 1794}, year = {2013}, language = {en} } @article{LindowBaumHege2011, author = {Lindow, Norbert and Baum, Daniel and Hege, Hans-Christian}, title = {Voronoi-Based Extraction and Visualization of Molecular Paths}, volume = {17}, journal = {IEEE Transactions on Visualization and Computer Graphics}, number = {12}, doi = {10.1109/TVCG.2011.259}, pages = {2025 -- 2034}, year = {2011}, language = {en} } @article{RigortGuentherHegerletal.2012, author = {Rigort, Alexander and G{\"u}nther, David and Hegerl, Reiner and Baum, Daniel and Weber, Britta and Prohaska, Steffen and Medalia, Ohad and Baumeister, Wolfgang and Hege, Hans-Christian}, title = {Automated segmentation of electron tomograms for a quantitative description of actin filament networks}, volume = {177}, journal = {Journal of Structural Biology}, doi = {10.1016/j.jsb.2011.08.012}, pages = {135 -- 144}, year = {2012}, language = {en} } @article{LindowBaumHege2012, author = {Lindow, Norbert and Baum, Daniel and Hege, Hans-Christian}, title = {Interactive Rendering of Materials and Biological Structures on Atomic and Nanoscopic Scale}, volume = {31}, journal = {Computer Graphics Forum}, number = {3}, doi = {10.1111/j.1467-8659.2012.03128.x target}, pages = {1325 -- 1334}, year = {2012}, language = {en} } @inproceedings{HombergBaumProhaskaetal.2012, author = {Homberg, Ulrike and Baum, Daniel and Prohaska, Steffen and Kalbe, Ute and Witt, Karl Josef}, title = {Automatic Extraction and Analysis of Realistic Pore Structures from µCT Data for Pore Space Characterization of Graded Soil}, booktitle = {Proceedings of the 6th International Conference on Scour and Erosion (ICSE-6)}, pages = {345 -- 352}, year = {2012}, language = {en} } @article{WeberGreenanProhaskaetal.2012, author = {Weber, Britta and Greenan, Garrett and Prohaska, Steffen and Baum, Daniel and Hege, Hans-Christian and M{\"u}ller-Reichert, Thomas and Hyman, Anthony and Verbavatz, Jean-Marc}, title = {Automated tracing of microtubules in electron tomograms of plastic embedded samples of Caenorhabditis elegans embryos}, volume = {178}, journal = {Journal of Structural Biology}, number = {2}, doi = {10.1016/j.jsb.2011.12.004}, pages = {129 -- 138}, year = {2012}, language = {en} } @article{LindowBaumProhaskaetal.2010, author = {Lindow, Norbert and Baum, Daniel and Prohaska, Steffen and Hege, Hans-Christian}, title = {Accelerated Visualization of Dynamic Molecular Surfaces}, volume = {29}, journal = {Comput. Graph. Forum}, doi = {10.1111/j.1467-8659.2009.01693.x}, pages = {943 -- 952}, year = {2010}, language = {en} } @inproceedings{HombergBaumProhaska2011, author = {Homberg, Ulrike and Baum, Daniel and Prohaska, Steffen}, title = {Describing and Analyzing the Dual Structures of Porous Media}, booktitle = {Proc. 3D-Microstructure Meeting}, editor = {M{\"u}cklich, Frank and Slussallek, Philipp and Schladitz, Katja}, pages = {24 -- 25}, year = {2011}, language = {en} } @inproceedings{WeberMoellerVerbavatzetal.2011, author = {Weber, Britta and M{\"o}ller, Marit and Verbavatz, Jean-Marc and Baum, Daniel and Hege, Hans-Christian and Prohaska, Steffen}, title = {Fast Tracing of Microtubule Centerlines in Electron Tomograms}, booktitle = {BioVis 2011 Abstracts, 1st IEEE Symposium on Biological Data Visualization}, year = {2011}, language = {en} } @inproceedings{LindowBaumBondaretal.2012, author = {Lindow, Norbert and Baum, Daniel and Bondar, Ana-Nicoleta and Hege, Hans-Christian}, title = {Dynamic Channels in Biomolecular Systems: Path Analysis and Visualization}, booktitle = {Proceedings of IEEE Symposium on Biological Data Visualization (biovis'12)}, doi = {10.1109/BioVis.2012.6378599}, pages = {99 -- 106}, year = {2012}, language = {en} } @article{LindowBaumHege2012, author = {Lindow, Norbert and Baum, Daniel and Hege, Hans-Christian}, title = {Perceptually Linear Parameter Variations}, volume = {31}, journal = {Computer Graphics Forum}, number = {2}, doi = {10.1111/j.1467-8659.2012.03054.x target}, pages = {535 -- 544}, year = {2012}, language = {en} } @inproceedings{BaumHege2006, author = {Baum, Daniel and Hege, Hans-Christian}, title = {A Point-matching based algorithm for 3D surface alignment of drug-sized molecules}, volume = {4216}, booktitle = {Computational Life Sciences II, Second International Symposium, CompLife 2006, Cambridge (UK), Sept. 2006}, publisher = {Springer}, doi = {10.1007/11875741_18}, pages = {183 -- 193}, year = {2006}, language = {en} } @inproceedings{Baum2005, author = {Baum, Daniel}, title = {Multiple semi-flexible 3D superposition of drug-sized molecules}, volume = {3695}, booktitle = {Computational Life Sciences: First International Symposium, CompLife 2005}, publisher = {Springer}, address = {Konstanz, Germany}, doi = {10.1007/11560500_18}, pages = {198 -- 207}, year = {2005}, language = {en} } @article{MatsuyamaTitschackBaumetal.2015, author = {Matsuyama, Kei and Titschack, J{\"u}rgen and Baum, Daniel and Freiwald, Andr{\´e}}, title = {Two new species of erect Bryozoa (Gymnolaemata: Cheilostomata) and the application of non-destructive imaging methods for quantitative taxonomy}, volume = {4020}, journal = {Zootaxa}, number = {1}, doi = {10.11646/zootaxa.4020.1.3}, pages = {81 -- 100}, year = {2015}, abstract = {Two new species of cheilostome Bryozoa are described from continental-slope habitats off Mauritania, including canyon and coldwater-coral (mound) habitats. Internal structures of both species were visualised and quantified using micro-computed tomographic (micro-CT) methods. Cellaria bafouri n. sp. is characterised by the arrangement of zooids in alternating longitudinal rows, a smooth cryptocyst, and the presence of an ooecial plate with denticles. Smittina imragueni n. sp. exhibits many similarities with Smittina cervicornis (Pallas, 1766), but differs especially in the shape and orientation of the suboral avicularium. Observations on Smittina imragueni and material labelled as Smittina cervicornis suggest that the latter represents a species group, members of which have not yet been discriminated, possibly because of high intracolony variation and marked astogenetic changes in surface morphology. Both new species are known only from the habitats where they were collected, probably reflecting the paucity of bryozoan sampling from this geographic area and depth range. Both species are able to tolerate low oxygen concentration, which is assumed to be compensated by the high nutrient supply off Mauritania. The application of micro-CT for the semiautomatic quantification of zooidal skeletal characters was successfully tested. We were able to automatically distinguish individual zooidal cavities and acquire corresponding morphological datasets. Comparing the obtained results with conventional SEM measurements allowed ascertaining the reliability of this new method. The employment of micro-CT allows the observation and quantification of previously un- seen characters that can be used in describing and differentiating species that were previously indistinguishable. Further- more, this method might help elucidate processes of colony growth and the function of individual zooids during this process.}, language = {en} } @article{TitschackBaumDePolHolzetal.2015, author = {Titschack, J{\"u}rgen and Baum, Daniel and De Pol-Holz, Ricardo and L{\´o}pez Correa, Matthias and Forster, Nina and Fl{\"o}gel, Sascha and Hebbeln, Dierk and Freiwald, Andr{\´e}}, title = {Aggradation and carbonate accumulation of Holocene Norwegian cold-water coral reefs}, volume = {62}, journal = {Sedimentology}, number = {7}, publisher = {Wiley}, doi = {10.1111/sed.12206}, pages = {1873 -- 1898}, year = {2015}, language = {en} } @misc{LindowBaumHege2014, author = {Lindow, Norbert and Baum, Daniel and Hege, Hans-Christian}, title = {Ligand Excluded Surface: A New Type of Molecular Surface}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-51194}, year = {2014}, abstract = {The most popular molecular surface in molecular visualization is the solvent excluded surface (SES). It provides information about the accessibility of a biomolecule for a solvent molecule that is geometrically approximated by a sphere. During a period of almost four decades, the SES has served for many purposes - including visualization, analysis of molecular interactions and the study of cavities in molecular structures. However, if one is interested in the surface that is accessible to a molecule whose shape differs significantly from a sphere, a different concept is necessary. To address this problem, we generalize the definition of the SES by replacing the probe sphere with the full geometry of the ligand defined by the arrangement of its van der Waals spheres. We call the new surface ligand excluded surface (LES) and present an efficient, grid-based algorithm for its computation. Furthermore, we show that this algorithm can also be used to compute molecular cavities that could host the ligand molecule. We provide a detailed description of its implementation on CPU and GPU. Furthermore, we present a performance and convergence analysis and compare the LES for several molecules, using as ligands either water or small organic molecules.}, language = {en} } @article{WeberTranfieldHoeoegetal.2014, author = {Weber, Britta and Tranfield, Erin M. and H{\"o}{\"o}g, Johanna L. and Baum, Daniel and Antony, Claude and Hyman, Tony and Verbavatz, Jean-Marc and Prohaska, Steffen}, title = {Automated stitching of microtubule centerlines across serial electron tomograms}, journal = {PLoS ONE}, doi = {10.1371/journal.pone.0113222}, pages = {e113222}, year = {2014}, language = {en} } @misc{RedemannWeberMoelleretal.2014, author = {Redemann, Stefanie and Weber, Britta and M{\"o}ller, Marit and Verbavatz, Jean-Marc and Hyman, Anthony and Baum, Daniel and Prohaska, Steffen and M{\"u}ller-Reichert, Thomas}, title = {The Segmentation of Microtubules in Electron Tomograms Using Amira}, journal = {Mitosis: Methods and Protocols}, publisher = {Springer}, doi = {10.1007/978-1-4939-0329-0_12}, pages = {261 -- 278}, year = {2014}, language = {en} } @article{LindowBaumHege2014, author = {Lindow, Norbert and Baum, Daniel and Hege, Hans-Christian}, title = {Ligand Excluded Surface: A New Type of Molecular Surface}, volume = {20}, journal = {IEEE Transactions on Visualization and Computer Graphics}, number = {12}, doi = {10.1109/TVCG.2014.2346404}, pages = {2486 -- 2495}, year = {2014}, abstract = {The most popular molecular surface in molecular visualization is the solvent excluded surface (SES). It provides information about the accessibility of a biomolecule for a solvent molecule that is geometrically approximated by a sphere. During a period of almost four decades, the SES has served for many purposes - including visualization, analysis of molecular interactions and the study of cavities in molecular structures. However, if one is interested in the surface that is accessible to a molecule whose shape differs significantly from a sphere, a different concept is necessary. To address this problem, we generalize the definition of the SES by replacing the probe sphere with the full geometry of the ligand defined by the arrangement of its van der Waals spheres. We call the new surface ligand excluded surface (LES) and present an efficient, grid-based algorithm for its computation. Furthermore, we show that this algorithm can also be used to compute molecular cavities that could host the ligand molecule. We provide a detailed description of its implementation on CPU and GPU. Furthermore, we present a performance and convergence analysis and compare the LES for several molecules, using as ligands either water or small organic molecules.}, language = {en} } @article{AboulhassanBaumWodoetal.2015, author = {Aboulhassan, Amal and Baum, Daniel and Wodo, Olga and Ganapathysubramanian, Baskar and Amassian, Aram and Hadwiger, Markus}, title = {A Novel Framework for Visual Detection and Exploration of Performance Bottlenecks in Organic Photovoltaic Solar Cell Materials}, volume = {34}, journal = {Computer Graphics Forum}, number = {3}, publisher = {Wiley}, doi = {10.1111/cgf.12652}, pages = {401 -- 410}, year = {2015}, abstract = {The current characterization methods of the Bulk Heterojunction (BHJ) - the main material of the new Organic Photovoltaic solar cells - are limited to the analysis of global fabrication parameters. This reduces the efficiency of the BHJ design process, since it misses critical information about the local performance bottlenecks in the morphology of the material. In this paper, we propose a novel framework that fills this gap through visual charac- terization and exploration of local structure-performance correlations. We propose a new formula that correlates the structural features to the performance bottlenecks. Since research into BHJ materials is highly multidisci- plinary, we enable a visual feedback strategy that allows the scientists to build intuition about the best choices of fabrication parameters. We evaluate the usefulness of our proposed system by obtaining new BHJ characteri- zations. We furthermore show that our approach could reduce the previous work-flow time from days to minutes.}, language = {en} } @misc{HoerthBaumKnoeteletal.2015, author = {Hoerth, Rebecca M. and Baum, Daniel and Kn{\"o}tel, David and Prohaska, Steffen and Willie, Bettina M. and Duda, Georg and Hege, Hans-Christian and Fratzl, Peter and Wagermaier, Wolfgang}, title = {Registering 2D and 3D Imaging Data of Bone during Healing}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-53426}, year = {2015}, abstract = {Purpose/Aims of the Study: Bone's hierarchical structure can be visualized using a variety of methods. Many techniques, such as light and electron microscopy generate two-dimensional (2D) images, while micro computed tomography (μCT) allows a direct representation of the three-dimensional (3D) structure. In addition, different methods provide complementary structural information, such as the arrangement of organic or inorganic compounds. The overall aim of the present study is to answer bone research questions by linking information of different 2D and 3D imaging techniques. A great challenge in combining different methods arises from the fact that they usually reflect different characteristics of the real structure. Materials and Methods: We investigated bone during healing by means of μCT and a couple of 2D methods. Backscattered electron images were used to qualitatively evaluate the tissue's calcium content and served as a position map for other experimental data. Nanoindentation and X-ray scattering experiments were performed to visualize mechanical and structural properties. Results: We present an approach for the registration of 2D data in a 3D μCT reference frame, where scanning electron microscopies serve as a methodic link. Backscattered electron images are perfectly suited for registration into μCT reference frames, since both show structures based on the same physical principles. We introduce specific registration tools that have been developed to perform the registration process in a semi-automatic way. Conclusions: By applying this routine, we were able to exactly locate structural information (e.g. mineral particle properties) in the 3D bone volume. In bone healing studies this will help to better understand basic formation, remodeling and mineralization processes.}, language = {en} } @article{HoerthBaumKnoeteletal.2015, author = {Hoerth, Rebecca M. and Baum, Daniel and Kn{\"o}tel, David and Prohaska, Steffen and Willie, Bettina M. and Duda, Georg and Hege, Hans-Christian and Fratzl, Peter and Wagermaier, Wolfgang}, title = {Registering 2D and 3D Imaging Data of Bone during Healing}, volume = {56}, journal = {Connective Tissue Research}, number = {2}, publisher = {Taylor \& Francis}, doi = {10.3109/03008207.2015.1005210}, pages = {133 -- 143}, year = {2015}, language = {en} } @article{CourniaAllenAndricioaeietal.2015, author = {Cournia, Zoe and Allen, Toby W. and Andricioaei, Ioan and Antonny, Bruno and Baum, Daniel and Brannigan, Grace and Buchete, Nicolae-Viorel and Deckman, Jason T. and Delemotte, Lucie and del Val, Coral and Friedman, Ran and Gkeka, Paraskevi and Hege, Hans-Christian and H{\´e}nin, J{\´e}r{\^o}me and Kasimova, Marina A. and Kolocouris, Antonios and Klein, Michael L. and Khalid, Syma and Lemieux, Joanne and Lindow, Norbert and Roy, Mahua and Selent, Jana and Tarek, Mounir and Tofoleanu, Florentina and Vanni, Stefano and Urban, Sinisa and Wales, David J. and Smith, Jeremy C. and Bondar, Ana-Nicoleta}, title = {Membrane Protein Structure, Function and Dynamics: A Perspective from Experiments and Theory}, volume = {248}, journal = {Journal of Membrane Biology}, number = {4}, doi = {10.1007/s00232-015-9802-0}, pages = {611 -- 640}, year = {2015}, language = {en} } @misc{AboulhassanBaumWodoetal.2015, author = {Aboulhassan, Amal and Baum, Daniel and Wodo, Olga and Ganapathysubramanian, Baskar and Amassian, Aram and Hadwiger, Markus}, title = {A Novel Framework for Visual Detection and Exploration of Performance Bottlenecks in Organic Photovoltaic Solar Cell Materials}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-54353}, year = {2015}, abstract = {Current characterization methods of the so-called Bulk Heterojunction (BHJ), which is the main material of Organic Photovoltaic (OPV) solar cells, are limited to the analysis of global fabrication parameters. This reduces the efficiency of the BHJ design process, since it misses critical information about the local performance bottlenecks in the morphology of the material. In this paper, we propose a novel framework that fills this gap through visual characterization and exploration of local structure-performance correlations. We also propose a formula that correlates the structural features with the performance bottlenecks. Since research into BHJ materials is highly multidisciplinary, our framework enables a visual feedback strategy that allows scientists to build intuition about the best choices of fabrication parameters. We evaluate the usefulness of our proposed system by obtaining new BHJ characterizations. Furthermore, we show that our approach could substantially reduce the turnaround time.}, language = {en} } @misc{WeberTranfieldHoeoegetal.2014, author = {Weber, Britta and Tranfield, Erin M. and H{\"o}{\"o}g, Johanna L. and Baum, Daniel and Antony, Claude and Hyman, Tony and Verbavatz, Jean-Marc and Prohaska, Steffen}, title = {Automated stitching of microtubule centerlines across serial electron tomograms}, issn = {1438-0064}, doi = {10.1371/journal.pone.0113222}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-52958}, year = {2014}, abstract = {Tracing microtubule centerlines in serial section electron tomography requires microtubules to be stitched across sections, that is lines from different sections need to be aligned, endpoints need to be matched at section boundaries to establish a correspondence between neighboring sections, and corresponding lines need to be connected across multiple sections. We present computational methods for these tasks: 1) An initial alignment is computed using a distance compatibility graph. 2) A fine alignment is then computed with a probabilistic variant of the iterative closest points algorithm, which we extended to handle the orientation of lines by introducing a periodic random variable to the probabilistic formulation. 3) Endpoint correspondence is established by formulating a matching problem in terms of a Markov random field and computing the best matching with belief propagation. Belief propagation is not generally guaranteed to converge to a minimum. We show how convergence can be achieved, nonetheless, with minimal manual input. In addition to stitching microtubule centerlines, the correspondence is also applied to transform and merge the electron tomograms. We applied the proposed methods to samples from the mitotic spindle in C. elegans, the meiotic spindle in X. laevis, and sub-pellicular microtubule arrays in T. brucei. The methods were able to stitch microtubules across section boundaries in good agreement with experts' opinions for the spindle samples. Results, however, were not satisfactory for the microtubule arrays. For certain experiments, such as an analysis of the spindle, the proposed methods can replace manual expert tracing and thus enable the analysis of microtubules over long distances with reasonable manual effort.}, language = {en} } @inproceedings{DeanSeidelKnoeteletal.2016, author = {Dean, Mason N. and Seidel, R. and Kn{\"o}tel, David and Lyons, K. and Baum, Daniel and Weaver, James C. and Fratzl, Peter}, title = {To build a shark: 3D tiling laws of tessellated cartilage}, volume = {56 (suppl 1)}, booktitle = {Abstract in Integrative and Comparative Biology; conference Society of Integrative and Comparative Biology annual meeting, January 3-7, 2016, Portland, USA}, year = {2016}, abstract = {The endoskeleton of sharks and rays (elasmobranchs) is comprised of a cartilaginous core, covered by thousands of mineralized tiles, called tesserae. Characterizing the relationship between tesseral morphometrics, skeletal growth and mechanics is challenging because tesserae are small (a few hundred micrometers wide), anchored to the surrounding tissue in complex three-dimensional ways, and occur in huge numbers. We integrate material property, histology, electron microscopy and synchrotron and laboratory µCT scans of skeletal elements from an ontogenetic series of round stingray Urobatis halleri, to gain insights into the generation and maintenance of a natural tessellated system. Using a custom-made semiautomatic segmentation algorithm, we present the first quantitative and 3d description of tesserae across whole skeletal elements. The tessellation is not interlocking or regular, with tesserae showing a great range of shapes, sizes and number of neighbors. This is partly region-dependent: for example, thick, columnar tesserae are arranged in series along convex edges with small radius of curvature (RoC), whereas more brick- or disc-shaped tesserae are found in planar/flatter areas. Comparison of the tessellation across ontogeny, shows that in younger animals, the forming tesseral network is less densely packed, appearing as a covering of separate, poorly mineralized islands that grow together with age to form a complete surface. Some gaps in the tessellation are localized to specific regions in all samples, indicating they are real features, perhaps either regions of delayed mineralization or of tendon insertion. We will use the structure of elasmobranch skeletons as a road map for understanding shark and ray skeletal mechanics, but also to extract fundamental engineering principles for tiled composite materials.}, language = {en} } @misc{AboulhassanSicatBaumetal.2017, author = {Aboulhassan, Amal and Sicat, Ronell and Baum, Daniel and Wodo, Olga and Hadwiger, Markus}, title = {Comparative Visual Analysis of Structure-Performance Relations in Complex Bulk-Heterojunction Morphologies}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-63239}, year = {2017}, abstract = {The structure of Bulk-Heterojunction (BHJ) materials, the main component of organic photovoltaic solar cells, is very complex, and the relationship between structure and performance is still largely an open question. Overall, there is a wide spectrum of fabrication configurations resulting in different BHJ morphologies and correspondingly different performances. Current state- of-the-art methods for assessing the performance of BHJ morphologies are either based on global quantification of morphological features or simply on visual inspection of the morphology based on experimental imaging. This makes finding optimal BHJ structures very challenging. Moreover, finding the optimal fabrication parameters to get an optimal structure is still an open question. In this paper, we propose a visual analysis framework to help answer these questions through comparative visualization and parameter space exploration for local morphology features. With our approach, we enable scientists to explore multivariate correlations between local features and performance indicators of BHJ morphologies. Our framework is built on shape-based clustering of local cubical regions of the morphology that we call patches. This enables correlating the features of clusters with intuition-based performance indicators computed from geometrical and topological features of charge paths.}, language = {en} } @article{KozlikovaKroneFalketal.2016, author = {Kozl{\´i}kov{\´a}, Barbora and Krone, Michael and Falk, Martin and Lindow, Norbert and Baaden, Marc and Baum, Daniel and Viola, Ivan and Parulek, Julius and Hege, Hans-Christian}, title = {Visualization of Biomolecular Structures: State of the Art Revisited}, volume = {36}, journal = {Computer Graphics Forum}, number = {8}, doi = {10.1111/cgf.13072}, pages = {178 -- 204}, year = {2016}, abstract = {Structural properties of molecules are of primary concern in many fields. This report provides a comprehensive overview on techniques that have been developed in the fields of molecular graphics and visualization with a focus on applications in structural biology. The field heavily relies on computerized geometric and visual representations of three-dimensional, complex, large and time-varying molecular structures. The report presents a taxonomy that demonstrates which areas of molecular visualization have already been extensively investigated and where the field is currently heading. It discusses visualizations for molecular structures, strategies for efficient display regarding image quality and frame rate, covers different aspects of level of detail and reviews visualizations illustrating the dynamic aspects of molecular simulation data. The survey concludes with an outlook on promising and important research topics to foster further success in the development of tools that help to reveal molecular secrets.}, language = {en} } @inproceedings{ArltLindowBaumetal.2016, author = {Arlt, Tobias and Lindow, Norbert and Baum, Daniel and Hilger, Andre and Mahnke, Ingo and Hege, Hans-Christian and Lepper, Verena and Siopi, Tzulia and Mahnke, Heinz.Eberhard}, title = {Virtual Access to Hidden Texts - Study of Ancient Papyri}, booktitle = {Eighth Joint BER II and BESSY II User Meeting, Dec 7-9, 2016, Berlin, Germany}, year = {2016}, abstract = {When physical unfolding/unrolling of papyri is not possible or too dangerous for preserving the precious object, tomographic approaches may be the ap- propriate alternative. Requirements are the resolution and the contrast to distinguish writing and substrate. The steps to be performed are the following: (1) Select the object of interest (archaeological arguments, cultural back- ground of the object, etc.). (2) Find the proper physical procedure, especially with respect to contrast, take the tomographic data, e.g. by absorption x-ray tomography. (3) Apply mathematical unfolding transformations to the tomographic data, in order to obtain a 2d-planar reconstruction of text.}, language = {en} } @article{AboulhassanSicatBaumetal.2017, author = {Aboulhassan, Amal and Sicat, Ronell and Baum, Daniel and Wodo, Olga and Hadwiger, Markus}, title = {Comparative Visual Analysis of Structure-Performance Relations in Complex Bulk-Heterojunction Morphologies}, volume = {36}, journal = {Computer Graphics Forum}, number = {3}, publisher = {Wiley}, doi = {10.1111/cgf.13191}, pages = {329 -- 339}, year = {2017}, abstract = {The structure of Bulk-Heterojunction (BHJ) materials, the main component of organic photovoltaic solar cells, is very complex, and the relationship between structure and performance is still largely an open question. Overall, there is a wide spectrum of fabrication configurations resulting in different BHJ morphologies and correspondingly different performances. Current state- of-the-art methods for assessing the performance of BHJ morphologies are either based on global quantification of morphological features or simply on visual inspection of the morphology based on experimental imaging. This makes finding optimal BHJ structures very challenging. Moreover, finding the optimal fabrication parameters to get an optimal structure is still an open question. In this paper, we propose a visual analysis framework to help answer these questions through comparative visualization and parameter space exploration for local morphology features. With our approach, we enable scientists to explore multivariate correlations between local features and performance indicators of BHJ morphologies. Our framework is built on shape-based clustering of local cubical regions of the morphology that we call patches. This enables correlating the features of clusters with intuition-based performance indicators computed from geometrical and topological features of charge paths.}, language = {en} } @article{HombergBaumProhaskaetal.2017, author = {Homberg, Ulrike and Baum, Daniel and Prohaska, Steffen and G{\"u}nster, Jens and Krauß-Sch{\"u}ler, Stefanie}, title = {Adapting trabecular structures for 3D printing: an image processing approach based on µCT data}, volume = {3}, journal = {Biomedical Physics \& Engineering Express}, number = {3}, publisher = {IOP Publishing}, doi = {10.1088/2057-1976/aa7611}, year = {2017}, abstract = {Materials with a trabecular structure notably combine advantages such as lightweight, reasonable strength, and permeability for fluids. This combination of advantages is especially interesting for tissue engineering in trauma surgery and orthopedics. Bone-substituting scaffolds for instance are designed with a trabecular structure in order to allow cell migration for bone ingrowth and vascularization. An emerging and recently very popular technology to produce such complex, porous structures is 3D printing. However, several technological aspects regarding the scaffold architecture, the printable resolution, and the feature size have to be considered when fabricating scaffolds for bone tissue replacement and regeneration. Here, we present a strategy to assess and prepare realistic trabecular structures for 3D printing using image analysis with the aim of preserving the structural elements. We discuss critical conditions of the printing system and present a 3-stage approach to adapt a trabecular structure from \$\mu\$CT data while incorporating knowledge about the printing system. In the first stage, an image-based extraction of solid and void structures is performed, which results in voxel- and graph-based representations of the extracted structures. These representations not only allow us to quantify geometrical properties such as pore size or strut geometry and length. But, since the graph represents the geometry and the topology of the initial structure, it can be used in the second stage to modify and adjust feature size, volume and sample size in an easy and consistent way. In the final reconstruction stage, the graph is then converted into a voxel representation preserving the topology of the initial structure. This stage generates a model with respect to the printing conditions to ensure a stable and controlled voxel placement during the printing process.}, language = {en} } @misc{HombergBaumProhaskaetal.2017, author = {Homberg, Ulrike and Baum, Daniel and Prohaska, Steffen and G{\"u}nster, Jens and Krauß-Sch{\"u}ler, Stefanie}, title = {Adapting trabecular structures for 3D printing: an image processing approach based on µCT data}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-64004}, year = {2017}, abstract = {Materials with a trabecular structure notably combine advantages such as lightweight, reasonable strength, and permeability for fluids. This combination of advantages is especially interesting for tissue engineering in trauma surgery and orthopedics. Bone-substituting scaffolds for instance are designed with a trabecular structure in order to allow cell migration for bone ingrowth and vascularization. An emerging and recently very popular technology to produce such complex, porous structures is 3D printing. However, several technological aspects regarding the scaffold architecture, the printable resolution, and the feature size have to be considered when fabricating scaffolds for bone tissue replacement and regeneration. Here, we present a strategy to assess and prepare realistic trabecular structures for 3D printing using image analysis with the aim of preserving the structural elements. We discuss critical conditions of the printing system and present a 3-stage approach to adapt a trabecular structure from \$\mu\$CT data while incorporating knowledge about the printing system. In the first stage, an image-based extraction of solid and void structures is performed, which results in voxel- and graph-based representations of the extracted structures. These representations not only allow us to quantify geometrical properties such as pore size or strut geometry and length. But, since the graph represents the geometry and the topology of the initial structure, it can be used in the second stage to modify and adjust feature size, volume and sample size in an easy and consistent way. In the final reconstruction stage, the graph is then converted into a voxel representation preserving the topology of the initial structure. This stage generates a model with respect to the printing conditions to ensure a stable and controlled voxel placement during the printing process.}, language = {en} } @inproceedings{BaumMahlowLameckeretal.2014, author = {Baum, Daniel and Mahlow, Kristin and Lamecker, Hans and Zachow, Stefan and M{\"u}ller, Johannes and Hege, Hans-Christian}, title = {The Potential of Surface-based Geometric Morphometrics for Evolutionary Studies: An Example using Dwarf Snakes (Eirenis)}, booktitle = {Abstract in DigitalSpecimen 2014}, year = {2014}, abstract = {Geometric morphometrics plays an important role in evolutionary studies. The state-of-the-art in this field are landmark-based methods. Since the landmarks usually need to be placed manually, only a limited number of landmarks are generally used to represent the shape of an anatomical structure. As a result, shape characteristics that cannot be properly represented by small sets of landmarks are disregarded. In this study, we present a method that is free of this limitation. The method takes into account the whole shape of an anatomical structure, which is represented as a surface, hence the term 'surface-based morphometrics'. Correspondence between two surfaces is established by defining a partitioning of the surfaces into homologous surface patches. The first step for the generation of a surface partitioning is to place landmarks on the surface. Subsequently, the landmarks are connected by curves lying on the surface. The curves, called 'surface paths', might either follow specific anatomical features or they can be geodesics, that is, shortest paths on the surface. One important requirement, however, is that the resulting surface path networks are topologically equivalent across all surfaces. Once the surface path networks have been defined, the surfaces are decomposed into patches according to the path networks. This approach has several advantages. One of them is that we can discretize the surface by as many points as desired. Thus, even fine shape details can be resolved if this is of interest for the study. Since a point discretization is used, another advantage is that well-established analysis methods for landmark-based morphometrics can be utilized. Finally, the shapes can be easily morphed into one another, thereby greatly supporting the understanding of shape changes across all considered specimens. To show the potential of the described method for evolutionary studies of biological specimens, we applied the method to the para-basisphenoid complex of the snake genus Eirenis. By using this anatomical structure as example, we present all the steps that are necessary for surface-based morphometrics, including the segmentation of the para-basisphenoid complex from micro-CT data sets. We also show some first results using statistical analysis as well as classification methods based on the presented technique.}, language = {en} } @article{PaetschBaumProhaskaetal.2014, author = {Paetsch, Olaf and Baum, Daniel and Prohaska, Steffen and Ehrig, Karsten and Ebell, Gino and Meinel, Dietmar and Heyn, Andreas}, title = {Korrosionsverfolgung in 3D-computertomographischen Aufnahmen von Stahlbetonproben}, journal = {DGZfP-Jahrestagung 2014 Konferenzband}, year = {2014}, language = {de} } @misc{PaetschBaumEbelletal.2014, author = {Paetsch, Olaf and Baum, Daniel and Ebell, Gino and Ehrig, Karsten and Heyn, Andreas and Meinel, Dietmar and Prohaska, Steffen}, title = {Korrosionsverfolgung in 3D-computertomographischen Aufnahmen von Stahlbetonproben}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-50912}, year = {2014}, abstract = {Kurzfassung. Durch die Alkalit{\"a}t des Betons wird Betonstahl dauerhaft vor Korrosion gesch{\"u}tzt. Infolge von Chlorideintrag kann dieser Schutz nicht l{\"a}nger aufrechterhalten werden und f{\"u}hrt zu Lochkorrosion. Die zerst{\"o}rungsfreie Pr{\"u}fung von Stahlbetonproben mit 3D-CT bietet die M{\"o}glichkeit, eine Probe mehrfach gezielt vorzusch{\"a}digen und den Korrosionsfortschritt zu untersuchen. Zur Quantifizierung des Sch{\"a}digungsgrades m{\"u}ssen die bei dieser Untersuchung anfallenden großen Bilddaten mit Bildverarbeitungsmethoden ausgewertet werden. Ein wesentlicher Schritt dabei ist die Segmentierung der Bilddaten, bei der zwischen Korrosionsprodukt (Rost), Betonstahl (BSt), Beton, Rissen, Poren und Umgebung unterschieden werden muss. Diese Segmentierung bildet die Grundlage f{\"u}r statistische Untersuchungen des Sch{\"a}digungsfortschritts. Hierbei sind die {\"A}nderung der BSt-Geometrie, die Zunahme von Korrosionsprodukten und deren Ver{\"a}nderung {\"u}ber die Zeit sowie ihrer r{\"a}umlichen Verteilung in der Probe von Interesse. Aufgrund der Gr{\"o}ße der CT-Bilddaten ist eine manuelle Segmentierung nicht durchf{\"u}hrbar, so dass automatische Verfahren unabdingbar sind. Dabei ist insbesondere die Segmentierung der Korrosionsprodukte in den Bilddaten ein schwieriges Problem. Allein aufgrund der Grauwerte ist eine Zuordnung nahezu unm{\"o}glich, denn die Grauwerte von Beton und Korrosionsprodukt unterscheiden sich kaum. Eine formbasierte Suche ist nicht offensichtlich, da die Korrosionsprodukte in Beton diffuse Formen haben. Allerdings l{\"a}sst sich Vorwissen {\"u}ber die Ausbreitung der Korrosionsprodukte nutzen. Sie bilden sich in r{\"a}umlicher N{\"a}he des BSt (in Bereichen vorheriger Volumenabnahme des BSt), entlang von Rissen sowie in Porenr{\"a}umen, die direkt am BSt und in dessen Nahbereich liegen. Davon ausgehend wird vor der Korrosionsprodukterkennung zun{\"a}chst eine BSt-Volumen-, Riss- und Porenerkennung durchgef{\"u}hrt. Dieser in der Arbeit n{\"a}her beschriebene Schritt erlaubt es, halbautomatisch Startpunkte (Seed Points) f{\"u}r die Korrosionsprodukterkennung zu finden. Weiterhin werden verschiedene in der Bildverarbeitung bekannte Algorithmen auf ihre Eignung untersucht werden.}, language = {de} } @article{FaerberTitschackSchoenbergetal.2016, author = {F{\"a}rber, Claudia and Titschack, J{\"u}rgen and Sch{\"o}nberg, Christine H. L. and Ehrig, Karsten and Boos, Karin and Baum, Daniel and Illerhaus, Bernd and Asgaard, Ulla and Bromley, Richard G. and Freiwald, Andr{\´e} and Wisshak, Max}, title = {Long-term macrobioerosion in the Mediterranean Sea assessed by micro-computed tomography}, volume = {13}, journal = {Biogeosciences}, number = {11}, address = {http://www.biogeosciences.net/13/3461/2016/}, doi = {10.5194/bg-13-3461-2016}, pages = {3461 -- 3474}, year = {2016}, abstract = {Biological erosion is a key process for the recycling of carbonate and the formation of calcareous sediments in the oceans. Experimental studies showed that bioerosion is subject to distinct temporal variability, but previous long-term studies were restricted to tropical waters. Here, we present results from a 14-year bioerosion experiment that was carried out along the rocky limestone coast of the island of Rhodes, Greece, in the Eastern Mediterranean Sea, in order to monitor the pace at which bioerosion affects carbonate substrate and the sequence of colonisation by bioeroding organisms. Internal macrobioerosion was visualised and quantified by micro-computed tomography and computer-algorithm-based segmentation procedures. Analysis of internal macrobioerosion traces revealed a dominance of bioeroding sponges producing eight types of characteristic Entobia cavity networks, which were matched to five different clionaid sponges by spicule identification in extracted tissue. The morphology of the entobians strongly varied depending on the species of the producing sponge, its ontogenetic stage, available space, and competition by other bioeroders. An early community developed during the first 5 years of exposure with initially very low macrobioerosion rates and was followed by an intermediate stage when sponges formed large and more diverse entobians and bioerosion rates increased. After 14 years, 30 \% of the block volumes were occupied by boring sponges, yielding maximum bioerosion rates of 900 g m^-2 yr^-1. A high spatial variability in macrobioerosion prohibited clear conclusions about the onset of macrobioerosion equilibrium conditions. This highlights the necessity of even longer experimental exposures and higher replication at various factor levels in order to better understand and quantify temporal patterns of macrobioerosion in marine carbonate environments.}, language = {en} } @misc{KozlikovaKroneFalketal.2015, author = {Kozlikova, Barbora and Krone, Michael and Falk, Martin and Lindow, Norbert and Baaden, Marc and Baum, Daniel and Viola, Ivan and Parulek, Julius and Hege, Hans-Christian}, title = {Visualization of Biomolecular Structures: State of the Art}, issn = {1438-0064}, doi = {10.2312/eurovisstar.20151112}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-57217}, year = {2015}, abstract = {Structural properties of molecules are of primary concern in many fields. This report provides a comprehensive overview on techniques that have been developed in the fields of molecular graphics and visualization with a focus on applications in structural biology. The field heavily relies on computerized geometric and visual representations of three-dimensional, complex, large, and time-varying molecular structures. The report presents a taxonomy that demonstrates which areas of molecular visualization have already been extensively investigated and where the field is currently heading. It discusses visualizations for molecular structures, strategies for efficient display regarding image quality and frame rate, covers different aspects of level of detail, and reviews visualizations illustrating the dynamic aspects of molecular simulation data. The survey concludes with an outlook on promising and important research topics to foster further success in the development of tools that help to reveal molecular secrets.}, language = {en} } @inproceedings{KozlikovaKroneLindowetal.2015, author = {Kozlikova, Barbora and Krone, Michael and Lindow, Norbert and Falk, Martin and Baaden, Marc and Baum, Daniel and Viola, Ivan and Parulek, Julius and Hege, Hans-Christian}, title = {Visualization of Biomolecular Structures: State of the Art}, booktitle = {EuroVis 2015 STARS Proceedings}, doi = {10.2312/eurovisstar.20151112}, pages = {61 -- 81}, year = {2015}, abstract = {Structural properties of molecules are of primary concern in many fields. This report provides a comprehensive overview on techniques that have been developed in the fields of molecular graphics and visualization with a focus on applications in structural biology. The field heavily relies on computerized geometric and visual representations of three-dimensional, complex, large, and time-varying molecular structures. The report presents a taxonomy that demonstrates which areas of molecular visualization have already been extensively investigated and where the field is currently heading. It discusses visualizations for molecular structures, strategies for efficient display regarding image quality and frame rate, covers different aspects of level of detail, and reviews visualizations illustrating the dynamic aspects of molecular simulation data. The report concludes with an outlook on promising and important research topics to enable further success in advancing the knowledge about interaction of molecular structures.}, language = {en} } @misc{TitschackBaum2014, author = {Titschack, J{\"u}rgen and Baum, Daniel}, title = {Advanced computed tomography analyses of cold-water coral mound cores: new insights into mound formation processes}, journal = {Poster, 19th International Sedimentological Congress, Geneva, Switzerland, 2014, August 18 - 22}, year = {2014}, language = {en} } @misc{TitschackBaum2015, author = {Titschack, J{\"u}rgen and Baum, Daniel}, title = {Ambient occlusion - a powerful algorithm to segment skeletal intrapores and gastral cavities in dendrophyllid cold-water corals}, journal = {Poster, 31st IAS Meeting of Sedimentology, 2015, June 22-25, Krak{\´o}w, Poland}, year = {2015}, language = {en} } @misc{KnoetelSeidelWeaveretal.2015, author = {Kn{\"o}tel, David and Seidel, Ronald and Weaver, James C. and Baum, Daniel and Dean, Mason N.}, title = {Segmentation of the Tessellated Mineralized Endoskeleton of Sharks and Rays}, journal = {Poster, Tomography for Scientific Advancement symposium (ToScA), Manchester, UK, September 3 - 4, 2015}, year = {2015}, abstract = {The cartilaginous endoskeletons of sharks and rays are covered by tiles of mineralized cartilage called tesserae that enclose areas of unmineralized cartilage. These tesselated layers are vital to the growth as well as the material properties of the skeleton, providing both flexibility and strength. An understanding of the principles behind the tiling of the mineralized layer requires a quantitative analysis of shark and ray skeletal tessellation. However, since a single skeletal element comprises several thousand tesserae, manual segmentation is infeasible. We developed an automated segmentation pipeline that, working from micro-CT data, allows quantification of all tesserae in a skeletal element in less than an hour. Our segmentation algorithm relies on aspects we have learned of general tesseral morphology. In micro-CT scans, tesserae usually appear as round or star-shaped plate-like tiles, wider than deep and connected by mineralized intertesseral joints. Based on these observations, we exploit the distance map of the mineralized layer to separate individual tiles using a hierarchical watershed algorithm. Utilizing a two-dimensional distance map that measures the distance in the plane of the mineralized layer only greatly improves the segmentation. We developed post-processing techniques to quickly correct segmentation errors in regions where tesseral shape differs from the assumed shape. Evaluation of our results is done qualitatively by visual comparison with raw datasets, and quantitatively by comparison to manual segmentations. Furthermore, we generate two-dimensional abstractions of the tiling network based on the neighborhood, allowing representation of complex, biological forms as simpler geometries. We apply our newly developed techniques to the analysis of the left and right hyomandibulae of four ages of stingray enabling the first quantitative analyses of the tesseral tiling structure, while clarifying how these patterns develop across ontogeny.}, language = {en} } @misc{KnoetelSeidelHosnyetal.2016, author = {Kn{\"o}tel, David and Seidel, Ronald and Hosny, Ahmed and Zaslansky, Paul and Weaver, James C. and Baum, Daniel and Dean, Mason N.}, title = {Understanding the Tiling Rules of the Tessellated Mineralized Endoskeleton of Sharks and Rays}, journal = {Poster, Euro Bio-inspired Materials 2016, Potsdam, Germany, February 22 - 25, 2016}, year = {2016}, abstract = {The endoskeletons of sharks and rays are composed of an unmineralized cartilaginous core, covered in an outer layer of mineralized tiles called tesserae. The tessellated layer is vital to the growth as well as the material properties of the skeletal element, providing both flexibility and strength. However, characterizing the relationship between tesseral size and shape, and skeletal growth and mechanics is challenging because tesserae are small (a few hundred micrometers wide), anchored to the surrounding tissue in complex three-dimensional ways, and occur in huge numbers. Using a custom-made semi-automatic segmentation algorithm, we present the first quantitative and three-dimensional description of tesserae in micro-CT scans of whole skeletal elements. Our segmentation algorithm relies on aspects we have learned of general tesseral morphology. We exploit the distance map of the mineralized layer to separate individual tiles using a hierarchical watershed algorithm. Additionally, we have developed post-processing techniques to quickly correct segmentation errors. Our data reveals that the tessellation is not regular, with tesserae showing a great range of shapes, sizes and number of neighbors. This is partly region-dependent: for example, thick, columnar tesserae are arranged in series along convex edges with small radius of curvature (RoC), whereas more brick-or disc-shaped tesserae are found in planar areas. We apply our newly developed techniques on the left and right hyomandibula (skeletal elements supporting the jaws) from four different ages of a stingray species, to clarify how tiling patterns develop across ontogeny and differ within and between individuals. We evaluate the functional consequences of tesseral morphologies using finite element analysis and 3d-printing, for a better understanding of shark skeletal mechanics, but also to extract fundamental engineering design principles of tiling arrangements on load-bearing three-dimensional objects.}, language = {en} } @misc{SeidelKnoetelBaumetal.2014, author = {Seidel, Ronald and Kn{\"o}tel, David and Baum, Daniel and Weaver, James C. and Dean, Mason N.}, title = {Material and structural characterization of mineralized elasmobranch cartilage - lessons in repeated tiling patterns in mechanically loaded 3D objects}, journal = {Poster, Tomography for Scientific Advancement symposium (ToScA), London, UK, September 1 - 3, 2014}, year = {2014}, abstract = {Biological tissues achieve a wide range of properties and function, however with limited components. The organization of these constituent parts is a decisive factor in the impressive properties of biological materials, with tissues often exhibiting complex arrangements of hard and soft materials. The "tessellated" cartilage of the endoskeleton of sharks and rays, for example, is a natural composite of mineralized polygonal tiles (tesserae), collagen fiber bundles, and unmineralized cartilage, resulting in a material that is both flexible and strong, with optimal stiffness. The properties of the materials and the tiling geometry are vital to the growth and mechanics of the system, but had not been investigated due to the technical challenges involved. We use high-resolution materials characterization techniques (qBEI, µCT) to show that tesserae exhibit great variability in mineral density, supporting theories of accretive growth mechanisms. We present a developmental series of tesserae and outline the development of unique structural features that appear to function in load bearing and energy dissipation, with some structural features far exceeding cortical bone's mineral content and tissue stiffness. To examine interactions among tesserae, we developed an advanced tiling-recognition-algorithm to semi-automatically detect and isolate individual tiles in microCT scans of tesseral mats. The method allows quantification of shape variation across a wide area, allowing localization of regions of high/low reinforcement or flexibility in the skeleton. The combination of our material characterization and visualization techniques allows the first quantitative 3d description of anatomy and material properties of tesserae and the organization of tesseral networks in elasmobranch mineralized cartilage, providing insight into form-function relationships of the repeating tiled pattern. We aim to combine detailed knowledge of intra-tesseral morphology and mineralization to model the relationships of tesseral shapes and skeletal surface curvature, to understand fundamental tiling laws important for complex, mechanically loaded 3d objects.}, language = {en} } @inproceedings{PaetschBaumProhaskaetal.2015, author = {Paetsch, Olaf and Baum, Daniel and Prohaska, Steffen and Ehrig, Karsten and Meinel, Dietmar and Ebell, Gino}, title = {3D Corrosion Detection in Time-dependent CT Images of Concrete}, booktitle = {DIR-2015 Proceedings}, year = {2015}, abstract = {In civil engineering, the corrosion of steel reinforcements in structural elements of concrete bares a risk of stability-reduction, mainly caused by the exposure to chlorides. 3D computed tomography (CT) reveals the inner structure of concrete and allows one to investigate the corrosion with non-destructive testing methods. To carry out such investigations, specimens with a large artificial crack and an embedded steel rebar have been manufactured. 3D CT images of those specimens were acquired in the original state. Subsequently three cycles of electrochemical pre-damaging together with CT imaging were applied. These time series have been evaluated by means of image processing algorithms to segment and quantify the corrosion products. Visualization of the results supports the understanding of how corrosion propagates into cracks and pores. Furthermore, pitting of structural elements can be seen without dismantling. In this work, several image processing and visualization techniques are presented that have turned out to be particularly effective for the visualization and segmentation of corrosion products. Their combination to a workflow for corrosion analysis is the main contribution of this work.}, language = {en} } @misc{KnoetelSeidelProhaskaetal.2017, author = {Kn{\"o}tel, David and Seidel, Ronald and Prohaska, Steffen and Dean, Mason N. and Baum, Daniel}, title = {Automated Segmentation of Complex Patterns in Biological Tissues: Lessons from Stingray Tessellated Cartilage}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-65785}, year = {2017}, abstract = {Introduction - Many biological structures show recurring tiling patterns on one structural level or the other. Current image acquisition techniques are able to resolve those tiling patterns to allow quantitative analyses. The resulting image data, however, may contain an enormous number of elements. This renders manual image analysis infeasible, in particular when statistical analysis is to be conducted, requiring a larger number of image data to be analyzed. As a consequence, the analysis process needs to be automated to a large degree. In this paper, we describe a multi-step image segmentation pipeline for the automated segmentation of the calcified cartilage into individual tesserae from computed tomography images of skeletal elements of stingrays. Methods - Besides applying state-of-the-art algorithms like anisotropic diffusion smoothing, local thresholding for foreground segmentation, distance map calculation, and hierarchical watershed, we exploit a graph-based representation for fast correction of the segmentation. In addition, we propose a new distance map that is computed only in the plane that locally best approximates the calcified cartilage. This distance map drastically improves the separation of individual tesserae. We apply our segmentation pipeline to hyomandibulae from three individuals of the round stingray (Urobatis halleri), varying both in age and size. Results - Each of the hyomandibula datasets contains approximately 3000 tesserae. To evaluate the quality of the automated segmentation, four expert users manually generated ground truth segmentations of small parts of one hyomandibula. These ground truth segmentations allowed us to compare the segmentation quality w.r.t. individual tesserae. Additionally, to investigate the segmentation quality of whole skeletal elements, landmarks were manually placed on all tesserae and their positions were then compared to the segmented tesserae. With the proposed segmentation pipeline, we sped up the processing of a single skeletal element from days or weeks to a few hours.}, language = {en} } @article{KnoetelSeidelProhaskaetal.2017, author = {Kn{\"o}tel, David and Seidel, Ronald and Prohaska, Steffen and Dean, Mason N. and Baum, Daniel}, title = {Automated Segmentation of Complex Patterns in Biological Tissues: Lessons from Stingray Tessellated Cartilage}, journal = {PLOS ONE}, doi = {10.1371/journal.pone.0188018}, year = {2017}, abstract = {Introduction - Many biological structures show recurring tiling patterns on one structural level or the other. Current image acquisition techniques are able to resolve those tiling patterns to allow quantitative analyses. The resulting image data, however, may contain an enormous number of elements. This renders manual image analysis infeasible, in particular when statistical analysis is to be conducted, requiring a larger number of image data to be analyzed. As a consequence, the analysis process needs to be automated to a large degree. In this paper, we describe a multi-step image segmentation pipeline for the automated segmentation of the calcified cartilage into individual tesserae from computed tomography images of skeletal elements of stingrays. Methods - Besides applying state-of-the-art algorithms like anisotropic diffusion smoothing, local thresholding for foreground segmentation, distance map calculation, and hierarchical watershed, we exploit a graph-based representation for fast correction of the segmentation. In addition, we propose a new distance map that is computed only in the plane that locally best approximates the calcified cartilage. This distance map drastically improves the separation of individual tesserae. We apply our segmentation pipeline to hyomandibulae from three individuals of the round stingray (Urobatis halleri), varying both in age and size. Results - Each of the hyomandibula datasets contains approximately 3000 tesserae. To evaluate the quality of the automated segmentation, four expert users manually generated ground truth segmentations of small parts of one hyomandibula. These ground truth segmentations allowed us to compare the segmentation quality w.r.t. individual tesserae. Additionally, to investigate the segmentation quality of whole skeletal elements, landmarks were manually placed on all tesserae and their positions were then compared to the segmented tesserae. With the proposed segmentation pipeline, we sped up the processing of a single skeletal element from days or weeks to a few hours.}, language = {en} } @misc{KramerNoackBaumetal.2017, author = {Kramer, Tobias and Noack, Matthias and Baum, Daniel and Hege, Hans-Christian and Heller, Eric J.}, title = {Dust and gas emission from cometary nuclei: the case of comet 67P/Churyumov-Gerasimenko}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-66338}, year = {2017}, abstract = {Comets display with decreasing solar distance an increased emission of gas and dust particles, leading to the formation of the coma and tail. Spacecraft missions provide insight in the temporal and spatial variations of the dust and gas sources located on the cometary nucleus. For the case of comet 67P/Churyumov-Gerasimenko (67P/C-G), the long-term obser- vations from the Rosetta mission point to a homogeneous dust emission across the entire illuminated surface. Despite the homogeneous initial dis- tribution, a collimation in jet-like structures becomes visible. We propose that this observation is linked directly to the complex shape of the nucleus and projects concave topographical features into the dust coma. To test this hypothesis, we put forward a gas-dust description of 67P/C-G, where gravitational and gas forces are accurately determined from the surface mesh and the rotation of the nucleus is fully incorporated. The emerging jet-like structures persist for a wide range of gas-dust interactions and show a dust velocity dependent bending.}, language = {en} } @phdthesis{Baum2007, author = {Baum, Daniel}, title = {A Point-Based Algorithm for Multiple 3D Surface Alignment of Drug-Sized Molecules}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:188-fudissthesis000000002759-2}, school = {Freie Universit{\"a}t Berlin}, year = {2007}, abstract = {One crucial step in virtual drug design is the identification of new lead structures with respect to a pharmacological target molecule. The search for new lead structures is often done with the help of a pharmacophore, which carries the essential structural as well as physico-chemical properties that a molecule needs to have in order to bind to the target molecule. In the absence of the target molecule, such a pharmacophore can be established by comparison of a set of active compounds. In order to identify their common features,a multiple alignment of all or most of the active compounds is necessary. Moreover, since the "outer shape" of the molecules plays a major role in the interaction between drug and target, an alignment algorithm aiming at the identification of common binding properties needs to consider the molecule's "outer shape", which can be approximated by the solvent excluded surface. In this thesis, we present a new approach to molecular surface alignment based on a discrete representation of shape as well as physico-chemical properties by points distributed on the solvent excluded surface. We propose a new method to distribute points regularly on a surface w.r.t. a smoothly varying point density given on that surface. Since the point distribution algorithm is not restricted to molecular surfaces, it might also be of interest for other applications. For the computation of pairwise surface alignments, we extend an existing point matching scheme to surface points, and we develop an efficient data structure speeding up the computation by a factor of three. Moreover, we present an approach to compute multiple alignments from pairwise alignments, which is able to handle a large number of surface points. All algorithms are evaluated on two sets of molecules: eight thermolysin inhibitors and seven HIV-1 protease inhibitors. Finally, we compare the results obtained from surface alignment with the results obtained by applying an atom alignment approach.}, language = {en} } @article{ToulkeridouGutierrezBaumetal.2021, author = {Toulkeridou, Evropi and Gutierrez, Carlos Enrique and Baum, Daniel and Doya, Kenji and Economo, Evan P.}, title = {Automated segmentation of insect anatomy from micro-CT images using deep learning}, journal = {bioRxiv}, doi = {10.1101/2021.05.29.446283}, year = {2021}, language = {en} } @article{LindowBruenigDercksenetal.2021, author = {Lindow, Norbert and Br{\"u}nig, Florian and Dercksen, Vincent J. and Fabig, Gunar and Kiewisz, Robert and Redemann, Stefanie and M{\"u}ller-Reichert, Thomas and Prohaska, Steffen and Baum, Daniel}, title = {Semi-automatic stitching of filamentous structures in image stacks from serial-section electron tomography}, volume = {284}, journal = {Journal of Microscopy}, number = {1}, doi = {10.1111/jmi.13039}, pages = {25 -- 44}, year = {2021}, abstract = {We present a software-assisted workflow for the alignment and matching of filamentous structures across a three-dimensional (3D) stack of serial images. This is achieved by combining automatic methods, visual validation, and interactive correction. After the computation of an initial automatic matching, the user can continuously improve the result by interactively correcting landmarks or matches of filaments. Supported by a visual quality assessment of regions that have been already inspected, this allows a trade-off between quality and manual labor. The software tool was developed in an interdisciplinary collaboration between computer scientists and cell biologists to investigate cell division by quantitative 3D analysis of microtubules (MTs) in both mitotic and meiotic spindles. For this, each spindle is cut into a series of semi-thick physical sections, of which electron tomograms are acquired. The serial tomograms are then stitched and non-rigidly aligned to allow tracing and connecting of MTs across tomogram boundaries. In practice, automatic stitching alone provides only an incomplete solution, because large physical distortions and a low signal-to-noise ratio often cause experimental difficulties. To derive 3D models of spindles despite dealing with imperfect data related to sample preparation and subsequent data collection, semi-automatic validation and correction is required to remove stitching mistakes. However, due to the large number of MTs in spindles (up to 30k) and their resulting dense spatial arrangement, a naive inspection of each MT is too time-consuming. Furthermore, an interactive visualization of the full image stack is hampered by the size of the data (up to 100 GB). Here, we present a specialized, interactive, semi-automatic solution that considers all requirements for large-scale stitching of filamentous structures in serial-section image stacks. To the best of our knowledge, it is the only currently available tool which is able to process data of the type and size presented here. The key to our solution is a careful design of the visualization and interaction tools for each processing step to guarantee real-time response, and an optimized workflow that efficiently guides the user through datasets. The final solution presented here is the result of an iterative process with tight feedback loops between the involved computer scientists and cell biologists.}, language = {en} } @article{ToulkeridouGutierrezBaumetal.2023, author = {Toulkeridou, Evropi and Gutierrez, Carlos Enrique and Baum, Daniel and Doya, Kenji and Economo, Evan P.}, title = {Automated segmentation of insect anatomy from micro-CT images using deep learning}, volume = {3}, journal = {Natural Sciences}, number = {4}, doi = {10.1002/ntls.20230010}, year = {2023}, abstract = {Three-dimensional (3D) imaging, such as micro-computed tomography (micro-CT), is increasingly being used by organismal biologists for precise and comprehensive anatomical characterization. However, the segmentation of anatomical structures remains a bottleneck in research, often requiring tedious manual work. Here, we propose a pipeline for the fully-automated segmentation of anatomical structures in micro-CT images utilizing state-of-the-art deep learning methods, selecting the ant brain as a test case. We implemented the U-Net architecture for 2D image segmentation for our convolutional neural network (CNN), combined with pixel-island detection. For training and validation of the network, we assembled a dataset of semi-manually segmented brain images of 76 ant species. The trained network predicted the brain area in ant images fast and accurately; its performance tested on validation sets showed good agreement between the prediction and the target, scoring 80\% Intersection over Union (IoU) and 90\% Dice Coefficient (F1) accuracy. While manual segmentation usually takes many hours for each brain, the trained network takes only a few minutes. Furthermore, our network is generalizable for segmenting the whole neural system in full-body scans, and works in tests on distantly related and morphologically divergent insects (e.g., fruit flies). The latter suggests that methods like the one presented here generally apply across diverse taxa. Our method makes the construction of segmented maps and the morphological quantification of different species more efficient and scalable to large datasets, a step toward a big data approach to organismal anatomy.}, language = {en} } @inproceedings{HarthBastTroidletal.2023, author = {Harth, Philipp and Bast, Arco and Troidl, Jakob and Meulemeester, Bjorge and Pfister, Hanspeter and Beyer, Johanna and Oberlaender, Marcel and Hege, Hans-Christian and Baum, Daniel}, title = {Rapid Prototyping for Coordinated Views of Multi-scale Spatial and Abstract Data: A Grammar-based Approach}, booktitle = {Eurographics Workshop on Visual Computing for Biology and Medicine (VCBM)}, doi = {10.2312/vcbm.20231218}, year = {2023}, abstract = {Visualization grammars are gaining popularity as they allow visualization specialists and experienced users to quickly create static and interactive views. Existing grammars, however, mostly focus on abstract views, ignoring three-dimensional (3D) views, which are very important in fields such as natural sciences. We propose a generalized interaction grammar for the problem of coordinating heterogeneous view types, such as standard charts (e.g., based on Vega-Lite) and 3D anatomical views. An important aspect of our web-based framework is that user interactions with data items at various levels of detail can be systematically integrated and used to control the overall layout of the application workspace. With the help of a concise JSON-based specification of the intended workflow, we can handle complex interactive visual analysis scenarios. This enables rapid prototyping and iterative refinement of the visual analysis tool in collaboration with domain experts. We illustrate the usefulness of our framework in two real-world case studies from the field of neuroscience. Since the logic of the presented grammar-based approach for handling interactions between heterogeneous web-based views is free of any application specifics, it can also serve as a template for applications beyond biological research.}, language = {en} } @article{LongrenEigenShubitidzeetal.2023, author = {Longren, Luke L. and Eigen, Lennart and Shubitidze, Ani and Lieschnegg, Oliver and Baum, Daniel and Nyakatura, John A. and Hildebrandt, Thomas and Brecht, Michael}, title = {Dense Reconstruction of Elephant Trunk Musculature}, volume = {33}, journal = {Current Biology}, doi = {10.1016/j.cub.2023.09.007}, pages = {1 -- 8}, year = {2023}, abstract = {The elephant trunk operates as a muscular hydrostat and is actuated by the most complex musculature known in animals. Because the number of trunk muscles is unclear, we performed dense reconstructions of trunk muscle fascicles, elementary muscle units, from microCT scans of an Asian baby elephant trunk. Muscle architecture changes markedly across the trunk. Trunk tip and finger consist of about 8,000 extraordinarily filigree fascicles. The dexterous finger consists exclusively of microscopic radial fascicles pointing to a role of muscle miniaturization in elephant dexterity. Radial fascicles also predominate (at 82\% volume) the remainder of the trunk tip and we wonder if radial muscle fascicles are of particular significance for fine motor control of the dexterous trunk tip. By volume, trunk-shaft muscles comprise one-third of the numerous, small radial muscle fascicles, two-thirds of the three subtypes of large longitudinal fascicles (dorsal longitudinals, ventral outer obliques, and ventral inner obliques), and a small fraction of transversal fascicles. Shaft musculature is laterally, but not radially, symmetric. A predominance of dorsal over ventral radial muscles and of ventral over dorsal longitudinal muscles may result in a larger ability of the shaft to extend dorsally than ventrally and to bend inward rather than outward. There are around 90,000 trunk muscle fascicles. While primate hand control is based on fine control of contraction by the convergence of many motor neurons on a small set of relatively large muscles, evolution of elephant grasping has led to thousands of microscopic fascicles, which probably outnumber facial motor neurons.}, language = {en} } @article{KiewiszBaumMuellerReichertetal.2023, author = {Kiewisz, Robert and Baum, Daniel and M{\"u}ller-Reichert, Thomas and Fabig, Gunar}, title = {Serial-section electron tomography and quantitative analysis of the microtubule organization in 3D-reconstructed mitotic spindles}, volume = {13}, journal = {Bio-protocol}, number = {20}, doi = {10.21769/BioProtoc.4849}, year = {2023}, language = {en} } @article{SchmittTitschackBaum2024, author = {Schmitt, Kira and Titschack, J{\"u}rgen and Baum, Daniel}, title = {CoDA: Interactive Segmentation and Morphological Analysis of Dendroid Structures Exemplified on Stony Cold-Water Corals}, arxiv = {http://arxiv.org/abs/2406.18236}, year = {2024}, abstract = {Dendroid stony corals build highly complex colonies that develop from a single coral polyp sitting in a cup-like skeleton, called corallite, by asexual reproduction, resulting in a tree-like branching pattern of its skeleton. Despite their beauty and ecological importance as reef builders in tropical shallow-water reefs as well as in cold-water coral mounds in the deep ocean, systematic studies investigating the ontogenetic morphological development of such coral colonies are largely missing. One reason for this is the sheer number of corallites - up to several thousands in a single coral colony. Another limiting factor, especially for the analysis of dendroid cold-water corals, is the existence of many secondary joints in the ideally tree-like structure that make a reconstruction of the skeleton tree extremely tedious. Herein, we present CoDA, the Coral Dendroid structure Analyzer, a visual analytics suite that allows for the first time to investigate the ontogenetic morphological development of complex dendroid coral colonies, exemplified on three important framework-forming dendroid cold-water corals: Lophelia pertusa (Linnaeus, 1758), Madrepora oculata (Linnaeus, 1758), and Goniocorella dumosa (Alcock, 1902). Input to CoDA is an initial instance segmentation of the coral polyp cavities (calices), from which it estimates the skeleton tree of the colony and extracts classical morphological measurements and advanced shape features of the individual corallites. CoDA also works as a proofreading and error correction tool by helping to identify wrong parts in the skeleton tree and providing tools to quickly correct these errors. The final skeleton tree enables the derivation of additional information about the calices/corallite instances that otherwise could not be obtained, including their ontogenetic generation and branching patterns - the basis of a fully quantitative statistical analysis of the coral colony morphology. Part of CoDA is CoDA.Graph, a feature-rich link-and-brush user interface for visualizing the extracted features and 2D graph layouts of the skeleton tree, enabling the real-time exploration of complex coral colonies and their building blocks, the individual corallites and branches. In the future, we expect CoDA to greatly facilitate the analysis of large stony corals of different species and morphotypes, as well as other dendroid structures, enabling new insights into the influence of genetic and environmental factors on their ontogenetic morphological development.}, language = {en} } @article{VohraHerreraTavhelidseSucketal.2024, author = {Vohra, Sumit Kumar and Herrera, Kristian and Tavhelidse-Suck, Tinatini and Knoblich, Simon and Seleit, Ali and Boulanger-Weill, Jonathan and Chambule, Sydney and Aspiras, Ariel and Santoriello, Cristina and Randlett, Owen and Wittbrodt, Joachim and Aulehla, Alexander and Lichtman, Jeff W. and Fishman, Mark and Hege, Hans-Christian and Baum, Daniel and Engert, Florian and Isoe, Yasuko}, title = {Multi-species community platform for comparative neuroscience in teleost fish}, journal = {bioRxiv}, doi = {10.1101/2024.02.14.580400}, year = {2024}, abstract = {Studying neural mechanisms in complementary model organisms from different ecological niches in the same animal class can leverage the comparative brain analysis at the cellular level. To advance such a direction, we developed a unified brain atlas platform and specialized tools that allowed us to quantitatively compare neural structures in two teleost larvae, medaka (Oryzias latipes) and zebrafish (Danio rerio). Leveraging this quantitative approach we found that most brain regions are similar but some subpopulations are unique in each species. Specifically, we confirmed the existence of a clear dorsal pallial region in the telencephalon in medaka lacking in zebrafish. Further, our approach allows for extraction of differentially expressed genes in both species, and for quantitative comparison of neural activity at cellular resolution. The web-based and interactive nature of this atlas platform will facilitate the teleost community's research and its easy extensibility will encourage contributions to its continuous expansion.}, language = {en} } @misc{HajarolasvadiBaum2024, author = {Hajarolasvadi, Noushin and Baum, Daniel}, title = {Data for Training the DeepOrientation Model: Simulated cryo-ET tomogram patches}, doi = {10.12752/9686}, year = {2024}, abstract = {A major restriction to applying deep learning methods in cryo-electron tomography is the lack of annotated data. Many large learning-based models cannot be applied to these images due to the lack of adequate experimental ground truth. One appealing alternative solution to the time-consuming and expensive experimental data acquisition and annotation is the generation of simulated cryo-ET images. In this context, we exploit a public cryo-ET simulator called PolNet to generate three datasets of two macromolecular structures, namely the ribosomal complex 4v4r and Thermoplasma acidophilum 20S proteasome, 3j9i. We select these two specific particles to test whether our models work for macromolecular structures with and without rotational symmetry. The three datasets contain 50, 150, and 450 tomograms with a voxel size of 10 ̊A, respectively. Here, we publish patches of size 40 × 40 × 40 extracted from the medium-sized dataset with 26,703 samples of 4v4r and 40,671 samples of 3j9i. The original tomograms from which the samples were extracted are of size 500 × 500 × 250. Finally, it should be noted that the currently published test dataset is employed for reporting the results of our paper titled "DeepOrientation: Deep Orientation Estimation of Macromolecules in Cryo-electron tomography" paper.}, language = {en} } @article{LuetzkendorfMatkovicRachidLiuetal.2025, author = {L{\"u}tzkendorf, Janine and Matkovic-Rachid, Tanja and Liu, Sunbin and G{\"o}tz, Torsten and Gao, Lili and Turrel, Oriane and Maglione, Marta and Grieger, Melanie and Putignano, Sabrina and Ramesh, Niraja and Ghelani, Tina and Neumann, Alexander and Gimber, Niclas and Schmoranzer, Jan and Stawrakakis, Anastasia and Brence, Blaž and Baum, Daniel and Ludwig, Kai and Heine, Martin and Mielke, Thorsten and Liu, Fan and Walter, Alexander and Wahl, Markus and Sigrist, Stephan}, title = {Blobby is a synaptic active zone assembly protein required for memory in Drosophila}, volume = {16}, journal = {Nature Communications}, doi = {10.1038/s41467-024-55382-9}, year = {2025}, language = {en} } @article{YangKnoetelCiecierskaHolmesetal.2024, author = {Yang, Binru and Kn{\"o}tel, David and Ciecierska-Holmes, Jana and W{\"o}lfer, Jan and Chaumel, J{\´u}lia and Zaslansky, Paul and Baum, Daniel and Fratzl, Peter and Dean, Mason N.}, title = {Growth of a tessellation: geometric rules for the development of stingray skeletal patterns}, volume = {11}, journal = {Advanced Science}, number = {48}, doi = {10.1002/advs.202407641}, year = {2024}, language = {en} } @article{MayerBaumAmbellanetal.2024, author = {Mayer, Julius and Baum, Daniel and Ambellan, Felix and von Tycowicz, Christoph and for the Alzheimer's Disease Neuroimaging Initiative,}, title = {Shape-based Disease Grading via Functional Maps and Graph Convolutional Networks with Application to Alzheimer's Disease}, volume = {24}, journal = {BMC Medical Imaging}, doi = {10.1186/s12880-024-01513-z}, year = {2024}, abstract = {Shape analysis provides methods for understanding anatomical structures extracted from medical images. However, the underlying notions of shape spaces that are frequently employed come with strict assumptions prohibiting the analysis of incomplete and/or topologically varying shapes. This work aims to alleviate these limitations by adapting the concept of functional maps. Further, we present a graph-based learning approach for morphometric classification of disease states that uses novel shape descriptors based on this concept. We demonstrate the performance of the derived classifier on the open-access ADNI database differentiating normal controls and subjects with Alzheimer's disease. Notably, the experiments show that our approach can improve over state-of-the-art from geometric deep learning.}, language = {en} } @inproceedings{GossingBeckertFischeretal.2024, author = {Gossing, Anne and Beckert, Andreas and Fischer, Christoph and Klenert, Nicolas and Natarajan, Vijay and Pacey, George and Vogt, Thorwin and Rautenhaus, Marc and Baum, Daniel}, title = {A Ridge-based Approach for Extraction and Visualization of 3D Atmospheric Fronts}, booktitle = {2024 IEEE Visualization and Visual Analytics (VIS)}, doi = {10.1109/VIS55277.2024.00043}, pages = {176 -- 180}, year = {2024}, abstract = {An atmospheric front is an imaginary surface that separates two distinct air masses and is commonly defined as the warm-air side of a frontal zone with high gradients of atmospheric temperature and humidity. These fronts are a widely used conceptual model in meteorology, which are often encountered in the literature as two-dimensional (2D) front lines on surface analysis charts. This paper presents a method for computing three-dimensional (3D) atmospheric fronts as surfaces that is capable of extracting continuous and well-confined features suitable for 3D visual analysis, spatio-temporal tracking, and statistical analyses. Recently developed contour-based methods for 3D front extraction rely on computing the third derivative of a moist potential temperature field. Additionally, they require the field to be smoothed to obtain continuous large-scale structures. This paper demonstrates the feasibility of an alternative method to front extraction using ridge surface computation. The proposed method requires only the sec- ond derivative of the input field and produces accurate structures even from unsmoothed data. An application of the ridge-based method to a data set corresponding to Cyclone Friederike demonstrates its benefits and utility towards visual analysis of the full 3D structure of fronts.}, language = {en} } @inproceedings{KlenertSchwoererHajarolasvadietal.2025, author = {Klenert, Nicolas and Schwoerer, Finn and Hajarolasvadi, Noushin and Bournez, Silo{\´e} and Arlt, Tobias and Mahnke, Heinz-Eberhard and Lepper, Verena and Baum, Daniel}, title = {Improving the Identification of Layers in 3D Images of Ancient Papyrus using Artificial Neural Networks}, booktitle = {2025 IEEE/CVF Winter Conference on Applications of Computer Vision Workshops (WACVW), Tucson, AZ, USA}, doi = {10.1109/WACVW65960.2025.00143}, pages = {1204 -- 1212}, year = {2025}, abstract = {The process of digitally unfolding ancient documents, such as folded papyrus packages, from 3D image data aims to be a non-invasive means to make previously hidden writing visible without risking to damage the precious documents. One of the main tasks necessary to digitally unfold a document is the geometric reconstruction of the writing substrate, which is a prerequisite for its subsequent unfolding. All current reconstruction methods require the existence of an interspace between different layers of the document to ensure a correct topology. Layers that appear merged together in the 3D image often result in wrong connections between layers and thus also in a wrong topology of the reconstructed geometry, which hinders the successful unfolding. Here, we propose to use a neural network to facilitate the discrimination of the layers. Using papyrus documents as an example of a particularly difficult writing material, we show that this significantly reduces the number of wrong connections and improves the overall identification of the layers. This in turn enables fully automatic digital unfolding of large areas of highly complex papyrus packages. Utilizing explainable AI (XAI) further allows us to explore the results of the applied neural network.}, language = {en} } @article{BoulangerWeillKaempfLSchaleketal.2025, author = {Boulanger-Weill, Jonathan and Kaempf, Florian and L. Schalek, Richard and Petkova, Mariela and Vohra, Sumit Kumar and Savaliya, Jay H. and Wu, Yuelong and Schuhknecht, Gregor F. P. and Naumann, Heike and Eberle, Maren and Kirchberger, Kim N. and Rencken, Simone and Bianco, Isaac H. and Baum, Daniel and Bene, Filippo Del and Engert, Florian and Lichtman, Jeff W. and Bahl, Armin}, title = {Correlative light and electron microscopy reveals the fine circuit structure underlying evidence accumulation in larval zebrafish}, journal = {bioRxiv}, doi = {10.1101/2025.03.14.643363}, year = {2025}, abstract = {Accumulating information is a critical component of most circuit computations in the brain across species, yet its precise implementation at the synaptic level remains poorly understood. Dissecting such neural circuits in vertebrates requires precise knowledge of functional neural properties and the ability to directly correlate neural dynamics with the underlying wiring diagram in the same animal. Here we combine functional calcium imaging with ultrastructural circuit reconstruction, using a visual motion accumulation paradigm in larval zebrafish. Using connectomic analyses of functionally identified cells and computational modeling, we show that bilateral inhibition, disinhibition, and recurrent connectivity are prominent motifs for sensory accumulation within the anterior hindbrain. We also demonstrate that similar insights about the structure-function relationship within this circuit can be obtained through complementary methods involving cell-specific morphological labeling via photo-conversion of functionally identified neuronal response types. We used our unique ground truth datasets to train and test a novel classifier algorithm, allowing us to assign functional labels to neurons from morphological libraries where functional information is lacking. The resulting feature-rich library of neuronal identities and connectomes enabled us to constrain a biophysically realistic network model of the anterior hindbrain that can reproduce observed neuronal dynamics and make testable predictions for future experiments. Our work exemplifies the power of hypothesis-driven electron microscopy paired with functional recordings to gain mechanistic insights into signal processing and provides a framework for dissecting neural computations across vertebrates.}, language = {en} } @article{LiSchindlerPaskinetal.2025, author = {Li, Tairan and Schindler, Mike and Paskin, Martha and Surapaneni, Venkata A. and Scott, Elliott and Hauert, Sabine and Payne, Nicholas and Cade, David E. and Goldbogen, Jeremy A. and Mollen, Frederik H. and Baum, Daniel and Hanna, Sean and Dean, Mason N.}, title = {Functional models from limited data: a parametric and multimodal approach to anatomy and 3D kinematics of feeding in basking sharks (Cetorhinus maximus)}, journal = {The Anatomical Record}, doi = {10.1002/ar.25693}, year = {2025}, language = {en} } @article{SterzikLichtenbergKroneetal.2023, author = {Sterzik, Anna and Lichtenberg, Nils and Krone, Michael and Baum, Daniel and Cunningham, Douglas W. and Lawonn, Kai}, title = {Enhancing molecular visualization: Perceptual evaluation of line variables with application to uncertainty visualization}, volume = {114}, journal = {Computers \& Graphics}, doi = {10.1016/j.cag.2023.06.006}, pages = {401 -- 413}, year = {2023}, abstract = {Data are often subject to some degree of uncertainty, whether aleatory or epistemic. This applies both to experimental data acquired with sensors as well as to simulation data. Displaying these data and their uncertainty faithfully is crucial for gaining knowledge. Specifically, the effective communication of the uncertainty can influence the interpretation of the data and the user's trust in the visualization. However, uncertainty-aware visualization has gotten little attention in molecular visualization. When using the established molecular representations, the physicochemical attributes of the molecular data usually already occupy the common visual channels like shape, size, and color. Consequently, to encode uncertainty information, we need to open up another channel by using feature lines. Even though various line variables have been proposed for uncertainty visualizations, they have so far been primarily used for two-dimensional data and there has been little perceptual evaluation. Thus, we conducted two perceptual studies to determine the suitability of the line variables blur, dashing, grayscale, sketchiness, and width for distinguishing several values in molecular visualizations. While our work was motivated by uncertainty visualization, our techniques and study results also apply to other types of scalar data.}, language = {en} } @article{FogalliPeresLineBaum2023, author = {Fogalli, Giovani Bressan and Peres Line, S{\´e}rgio Roberto and Baum, Daniel}, title = {Segmentation of tooth enamel microstructure images using classical image processing and U-Net approaches}, volume = {2}, journal = {Frontiers in Imaging}, doi = {10.3389/fimag.2023.1215764}, year = {2023}, abstract = {Tooth enamel is the hardest tissue in human organism, formed by prism layers in regularly alternating directions. These prisms form the Hunter-Schreger Bands (HSB) pattern when under side illumination, which is composed of light and dark stripes resembling fingerprints. We have shown in previous works that HSB pattern is highly variable, seems to be unique for each tooth and can be used as a biometric method for human identification. Since this pattern cannot be acquired with sensors, the HSB region in the digital photograph must be identified and correctly segmented from the rest of the tooth and background. Although these areas can be manually removed, this process is not reliable as excluded areas can vary according to the individual's subjective impression. Therefore, the aim of this work was to develop an algorithm that automatically selects the region of interest (ROI), thus, making the entire biometric process straightforward. We used two different approaches: a classical image processing method which we called anisotropy-based segmentation (ABS) and a machine learning method known as U-Net, a fully convolutional neural network. Both approaches were applied to a set of extracted tooth images. U-Net with some post processing outperformed ABS in the segmentation task with an Intersection Over Union (IOU) of 0.837 against 0.766. Even with a small dataset, U-Net proved to be a potential candidate for fully automated in-mouth application. However, the ABS technique has several parameters which allow a more flexible segmentation with interactive adjustments specific to image properties.}, language = {en} } @article{KlenertLepperBaum2024, author = {Klenert, Nicolas and Lepper, Verena and Baum, Daniel}, title = {A Local Iterative Approach for the Extraction of 2D Manifolds from Strongly Curved and Folded Thin-Layer Structures}, volume = {30}, journal = {IEEE Transactions on Visualization and Computer Graphics}, number = {1}, doi = {10.1109/TVCG.2023.3327403}, pages = {1260 -- 1270}, year = {2024}, abstract = {Ridge surfaces represent important features for the analysis of 3-dimensional (3D) datasets in diverse applications and are often derived from varying underlying data including flow fields, geological fault data, and point data, but they can also be present in the original scalar images acquired using a plethora of imaging techniques. Our work is motivated by the analysis of image data acquired using micro-computed tomography (μCT) of ancient, rolled and folded thin-layer structures such as papyrus, parchment, and paper as well as silver and lead sheets. From these documents we know that they are 2-dimensional (2D) in nature. Hence, we are particularly interested in reconstructing 2D manifolds that approximate the document's structure. The image data from which we want to reconstruct the 2D manifolds are often very noisy and represent folded, densely-layered structures with many artifacts, such as ruptures or layer splitting and merging. Previous ridge-surface extraction methods fail to extract the desired 2D manifold for such challenging data. We have therefore developed a novel method to extract 2D manifolds. The proposed method uses a local fast marching scheme in combination with a separation of the region covered by fast marching into two sub-regions. The 2D manifold of interest is then extracted as the surface separating the two sub-regions. The local scheme can be applied for both automatic propagation as well as interactive analysis. We demonstrate the applicability and robustness of our method on both artificial data as well as real-world data including folded silver and papyrus sheets.}, language = {en} } @article{ZemannLeSherlocketal.2023, author = {Zemann, Berit and Le, Mai-Lee Van and Sherlock, Rob E. and Baum, Daniel and Katija, Kakani and Stach, Thomas}, title = {Evolutionary traces of miniaturization in a giant - Comparative anatomy of brain and brain nerves in Bathochordaeus stygius (Tunicata, Appendicularia)}, volume = {284}, journal = {Journal of Morphology}, number = {7}, doi = {10.1002/jmor.21598}, year = {2023}, language = {en} } @inproceedings{BrenceFuchsHiesingeretal.2025, author = {Brence, Blaž and Fuchs, Joachim and Hiesinger, Peter Robin and Baum, Daniel}, title = {Fully automated quantification of synaptic locations in multi-channel Drosophila photoreceptor microscopy data}, booktitle = {Eurographics Workshop on Visual Computing for Biology and Medicine}, editor = {Garrison, Laura and Krueger, Robert}, doi = {10.2312/vcbm.20251254}, year = {2025}, abstract = {The workload posed by image analysis remains a major bottleneck for advances across the life sciences. To address this challenge, we have developed a fully automated workflow for processing complex 3D multi-channel microscopy images. Specifically, our workflow addresses the analysis of photoreceptor synapses in confocal images of the Drosophila melanogaster optic lobe. The workflow consists of multiple stages, combining traditional and machine learning-based approaches for image analysis and visual computing. It performs segmentation of brain regions, photoreceptor instance identification, and precise localization of synapses. The key novelty of the workflow is an automatic alignment of synapses into a cylindrical reference coordinate system, enabling comparative synaptic analysis across photoreceptors. To demonstrate the workflow's applicability, preliminary biological results and their interpretation based on 50 images are presented. While the workflow is still being improved further, here, we showcase its capacity for efficient and objective data processing for high-throughput neurobiological analyses.}, language = {en} } @article{VohraEberleBoulangerWeilletal.2025, author = {Vohra, Sumit Kumar and Eberle, Maren and Boulanger-Weill, Jonathan and Petkova, Mariela D. and Schuhknecht, Gregor F. P. and Herrera, Kristian J. and K{\"a}mpf, Florian and Ruetten, Virginia M. S. and Lichtman, Jeff W. and Engert, Florian and Randlett, Owen and Bahl, Armin and Isoe, Yasuko and Hege, Hans-Christian and Baum, Daniel}, title = {Fishexplorer: A multimodal cellular atlas platform for neuronal circuit dissection in larval zebrafish}, journal = {bioRxiv}, doi = {10.1101/2025.07.14.664689}, year = {2025}, abstract = {Understanding how neural circuits give rise to behavior requires comprehensive knowledge of neuronal morphology, connectivity, and function. Atlas platforms play a critical role in enabling the visualization, exploration, and dissemination of such information. Here, we present FishExplorer, an interactive and expandable community platform designed to integrate and analyze multimodal brain data from larval zebrafish. FishExplorer supports datasets acquired through light microscopy (LM), electron microscopy (EM), and X-ray imaging, all co-registered within a unified spatial coordinate system which enables seamless comparison of neuronal morphologies and synaptic connections. To further assist circuit analysis, FishExplorer includes a suite of tools for querying and visualizing connectivity at the whole-brain scale. By integrating data from recent large-scale EM reconstructions (presented in companion studies), FishExplorer enables researchers to validate circuit models, explore wiring principles, and generate new hypotheses. As a continuously evolving resource, FishExplorer is designed to facilitate collaborative discovery and serve the growing needs of the teleost neuroscience community.}, language = {en} } @article{HuTutikaDengetal.2025, author = {Hu, Chenhao and Tutika, Ravi and Deng, Zhifei and Jia, Zian and Chen, Liuni and Chen, Hongshun and Geng, Yang and Xiao, Xianghui and Shevchenko, Pavel D. and Pierre, Christoph and Weaver, James C. and Baum, Daniel and Bartlett, Michael D. and Li, Ling}, title = {Mineralized sclerites in the gorgonian coral Leptogorgia chilensis as a natural jamming system}, volume = {122}, journal = {PNAS}, number = {44}, doi = {10.1073/pnas.2504541122}, year = {2025}, language = {en} } @article{SterzikKroneBaumetal.2025, author = {Sterzik, Anna and Krone, Michael and Baum, Daniel and Cunningham, Douglas W. and Lawonn, Kai}, title = {Uncertainty Visualization for Biomolecular Structures: An Empirical Evaluation}, volume = {31}, journal = {IEEE Transactions on Visualization and Computer Graphics}, number = {12}, doi = {10.1109/TVCG.2025.3596385}, pages = {10296 -- 10310}, year = {2025}, abstract = {Uncertainty is an intrinsic property of almost all data, regardless of the data being measured, simulated, or generated. It can significantly influence the results and reliability of subsequent analysis steps. Clearly communicating uncertainties is crucial for informed decision-making and understanding, especially in biomolecular data, where uncertainty is often difficult to infer. Uncertainty visualization (UV) is a powerful tool for this purpose. However, previously proposed UV methods lack sufficient empirical evaluation. We collected and categorized visualization methods for portraying positional uncertainty in biomolecular structures. We then organized the methods into metaphorical groups and extracted nine representatives: color, clouds, ensemble, hulls, sausages, contours, texture, waves, and noise. We assessed their strengths and weaknesses in a twofold approach: expert assessments with six domain experts and three perceptual evaluations involving 1,756 participants. Through the expert assessments, we aimed to highlight the advantages and limitations of the individual methods for the application domain and discussed areas for necessary improvements. Through the perceptual evaluation, we investigated whether the visualizations are intuitively associated with uncertainty and whether the directionality of the mapping is perceived as intended. We also assessed the accuracy of inferring uncertainty values from the visualizations. Based on our results, we judged the appropriateness of the metaphors for encoding uncertainty and suggest further areas for improvement.}, language = {en} } @misc{EhlersWesselBaum2021, author = {Ehlers, Sarah and Wessel, Andreas and Baum, Daniel}, title = {Segmentation of abdominal chordotonal organs based on semithin serial sections in the Rhododendron leafhopper Graphocephala fennahi (Cicadomorpha: Cicadellidae)}, doi = {10.12752/8326}, year = {2021}, abstract = {For mating, leafhoppers (Cicadellidae) use substrate-borne vibrational signals to communicate. We provide the first complete description of the abdominal chordotonal organs that enable the perception of these signals. This supplementary data provides the aligned stack of 450 semithin serial sections of the first and second abdominal segment of an adult male Rhododendron leafhopper (Graphocephala fennahi). Further, this supplementary data comprises the segmentation files of five chordotonal organs, the exoskeleton, the segmental nerves and the spiracles of the first and the second abdominal segment. Due to time limitations, the structures of only one half of the body were segmented. The specimen was caught by hand net in September 2018 in Berlin-Tiergarten, Germany. Samples were embedded in Araldite® 502 resin and cut transversally in 1 μm thick sections using a Leica ultramicrotome and a DIATOME Histo Jumbo 6.0 mm diamond knife. Sections were placed on microscopic slides and stained with methylene blue/azur II. The images were taken by means of a 3DHISTECH PANNORAMIC SCAN II slide scanner in the Institute of Pathology Charit{\´e} in Berlin-Mitte, Germany. Images with a voxel size of 0.273809 μm x 0.273809 μm x 1 μm where obtained. The images were converted from MRXS-files to TIFF-files with the 3DHistech software Slide Converter 2.3. Using Photoshop, the images were cropped to the same canvas size and artefacts were removed. All further steps, such as alignment and segmentation, were done with the software Amira. In order to facilitate the further processing of the dataset, the voxels where resampled to a size of 0.547619 μm x 0.547619 μm x 1 μm.}, language = {en} } @article{VohraHarthIsoeetal.2024, author = {Vohra, Sumit Kumar and Harth, Philipp and Isoe, Yasuko and Bahl, Armin and Fotowat, Haleh and Engert, Florian and Hege, Hans-Christian and Baum, Daniel}, title = {A Visual Interface for Exploring Hypotheses about Neural Circuits}, volume = {30}, journal = {IEEE Transactions on Visualization and Computer Graphics}, number = {7}, doi = {10.1109/TVCG.2023.3243668}, pages = {3945 -- 3958}, year = {2024}, abstract = {One of the fundamental problems in neurobiological research is to understand how neural circuits generate behaviors in response to sensory stimuli. Elucidating such neural circuits requires anatomical and functional information about the neurons that are active during the processing of the sensory information and generation of the respective response, as well as an identification of the connections between these neurons. With modern imaging techniques, both morphological properties of individual neurons as well as functional information related to sensory processing, information integration and behavior can be obtained. Given the resulting information, neurobiologists are faced with the task of identifying the anatomical structures down to individual neurons that are linked to the studied behavior and the processing of the respective sensory stimuli. Here, we present a novel interactive tool that assists neurobiologists in the aforementioned task by allowing them to extract hypothetical neural circuits constrained by anatomical and functional data. Our approach is based on two types of structural data: brain regions that are anatomically or functionally defined, and morphologies of individual neurons. Both types of structural data are interlinked and augmented with additional information. The presented tool allows the expert user to identify neurons using Boolean queries. The interactive formulation of these queries is supported by linked views, using, among other things, two novel 2D abstractions of neural circuits. The approach was validated in two case studies investigating the neural basis of vision-based behavioral responses in zebrafish larvae. Despite this particular application, we believe that the presented tool will be of general interest for exploring hypotheses about neural circuits in other species, genera and taxa.}, language = {en} } @misc{VohraHarthIsoeetal.2023, author = {Vohra, Sumit Kumar and Harth, Philipp and Isoe, Yasuko and Bahl, Armin and Fotowat, Haleh and Engert, Florian and Hege, Hans-Christian and Baum, Daniel}, title = {A Visual Interface for Exploring Hypotheses about Neural Circuits}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-89932}, year = {2023}, abstract = {One of the fundamental problems in neurobiological research is to understand how neural circuits generate behaviors in response to sensory stimuli. Elucidating such neural circuits requires anatomical and functional information about the neurons that are active during the processing of the sensory information and generation of the respective response, as well as an identification of the connections between these neurons. With modern imaging techniques, both morphological properties of individual neurons as well as functional information related to sensory processing, information integration and behavior can be obtained. Given the resulting information, neurobiologists are faced with the task of identifying the anatomical structures down to individual neurons that are linked to the studied behavior and the processing of the respective sensory stimuli. Here, we present a novel interactive tool that assists neurobiologists in the aforementioned task by allowing them to extract hypothetical neural circuits constrained by anatomical and functional data. Our approach is based on two types of structural data: brain regions that are anatomically or functionally defined, and morphologies of individual neurons. Both types of structural data are interlinked and augmented with additional information. The presented tool allows the expert user to identify neurons using Boolean queries. The interactive formulation of these queries is supported by linked views, using, among other things, two novel 2D abstractions of neural circuits. The approach was validated in two case studies investigating the neural basis of vision-based behavioral responses in zebrafish larvae. Despite this particular application, we believe that the presented tool will be of general interest for exploring hypotheses about neural circuits in other species, genera and taxa.}, language = {en} } @article{TomholtBaumWoodetal.2023, author = {Tomholt, Lara and Baum, Daniel and Wood, Robert J. and Weaver, James C.}, title = {High-throughput segmentation, data visualization, and analysis of sea star skeletal networks}, volume = {215}, journal = {Journal of Structural Biology}, number = {2}, doi = {10.1016/j.jsb.2023.107955}, pages = {107955}, year = {2023}, abstract = {The remarkably complex skeletal systems of the sea stars (Echinodermata, Asteroidea), consisting of hundreds to thousands of individual elements (ossicles), have intrigued investigators for more than 150 years. While the general features and structural diversity of isolated asteroid ossicles have been well documented in the literature, the task of mapping the spatial organization of these constituent skeletal elements in a whole-animal context represents an incredibly laborious process, and as such, has remained largely unexplored. To address this unmet need, particularly in the context of understanding structure-function relationships in these complex skeletal systems, we present an integrated approach that combines micro-computed tomography, semi-automated ossicle segmentation, data visualization tools, and the production of additively manufactured tangible models to reveal biologically relevant structural data that can be rapidly analyzed in an intuitive manner. In the present study, we demonstrate this high-throughput workflow by segmenting and analyzing entire skeletal systems of the giant knobby star, Pisaster giganteus, at four different stages of growth. The in-depth analysis, presented herein, provides a fundamental understanding of the three-dimensional skeletal architecture of the sea star body wall, the process of skeletal maturation during growth, and the relationship between skeletal organization and morphological characteristics of individual ossicles. The widespread implementation of this approach for investigating other species, subspecies, and growth series has the potential to fundamentally improve our understanding of asteroid skeletal architecture and biodiversity in relation to mobility, feeding habits, and environmental specialization in this fascinating group of echinoderms.}, language = {en} } @article{HerterHegeHadwigeretal.2021, author = {Herter, Felix and Hege, Hans-Christian and Hadwiger, Markus and Lepper, Verena and Baum, Daniel}, title = {Thin-Volume Visualization on Curved Domains}, volume = {40}, journal = {Computer Graphics Forum}, number = {3}, publisher = {Wiley-Blackwell Publishing Ltd.}, address = {United Kingdom}, doi = {10.1111/cgf.14296}, pages = {147 -- 157}, year = {2021}, abstract = {Thin, curved structures occur in many volumetric datasets. Their analysis using classical volume rendering is difficult because parts of such structures can bend away or hide behind occluding elements. This problem cannot be fully compensated by effective navigation alone, because structure-adapted navigation in the volume is cumbersome and only parts of the structure are visible in each view. We solve this problem by rendering a spatially transformed view into the volume so that an unobscured visualization of the entire curved structure is obtained. As a result, simple and intuitive navigation becomes possible. The domain of the spatial transform is defined by a triangle mesh that is topologically equivalent to an open disc and that approximates the structure of interest. The rendering is based on ray-casting in which the rays traverse the original curved sub-volume. In order to carve out volumes of varying thickness, the lengths of the rays as well as the position of the mesh vertices can be easily modified in a view-controlled manner by interactive painting. We describe a prototypical implementation and demonstrate the interactive visual inspection of complex structures from digital humanities, biology, medicine, and materials science. Displaying the structure as a whole enables simple inspection of interesting substructures in their original spatial context. Overall, we show that transformed views utilizing ray-casting-based volume rendering supported by guiding surface meshes and supplemented by local, interactive modifications of ray lengths and vertex positions, represent a simple but versatile approach to effectively visualize thin, curved structures in volumetric data.}, language = {en} } @article{BaumHerterLarsenetal.2021, author = {Baum, Daniel and Herter, Felix and Larsen, John M{\o}ller and Lichtenberger, Achim and Raja, Rubina}, title = {Revisiting the Jerash Silver Scroll: a new visual data analysis approach}, volume = {21}, journal = {Digital Applications in Archaeology and Cultural Heritage}, doi = {10.1016/j.daach.2021.e00186}, pages = {e00186}, year = {2021}, abstract = {This article revisits a complexly folded silver scroll excavated in Jerash, Jordan in 2014 that was digitally examined in 2015. In this article we apply, examine and discuss a new virtual unfolding technique that results in a clearer image of the scroll's 17 lines of writing. We also compare it to the earlier unfolding and discuss progress in general analytical tools. We publish the original and the new images as well as the unfolded volume data open access in order to make these available to researchers interested in optimising unfolding processes of various complexly folded materials.}, language = {en} } @article{BeckerTeepleCharlesetal.2022, author = {Becker, Kaitlyn P and Teeple, Clark and Charles, Nicholas and Jung, Yeonsu and Baum, Daniel and Weaver, James C and Mahadevan, L. and Wood, Robert J}, title = {Active entanglement enables stochastic, topological grasping}, volume = {119}, journal = {PNAS}, number = {42}, doi = {10.1073/pnas.2209819119}, pages = {e2209819119}, year = {2022}, abstract = {Grasping, in both biological and engineered mechanisms, can be highly sensitive to the gripper and object morphology, as well as perception and motion planning. Here we circumvent the need for feedback or precise planning by using an array of fluidically-actuated slender hollow elastomeric filaments to actively entangle with objects that vary in geometric and topological complexity. The resulting stochastic interactions enable a unique soft and conformable grasping strategy across a range of target objects that vary in size, weight, and shape. We experimentally evaluate the grasping performance of our strategy, and use a computational framework for the collective mechanics of flexible filaments in contact with complex objects to explain our findings. Overall, our study highlights how active collective entanglement of a filament array via an uncontrolled, spatially distributed scheme provides new options for soft, adaptable grasping.}, language = {en} } @article{LaguilloDiegoKiewiszMartiGomezetal.2022, author = {Laguillo-Diego, Alejandra and Kiewisz, Robert and Mart{\´i}-G{\´o}mez, Carlos and Baum, Daniel and M{\"u}ller-Reichert, Thomas and Vernos, Isabelle}, title = {MCRS1 modulates the heterogeneity of microtubule minus-end morphologies in mitotic spindles}, volume = {34}, journal = {Molecular Biology of the Cell}, number = {1}, doi = {10.1091/mbc.E22-08-0306-T}, year = {2022}, abstract = {Faithful chromosome segregation requires the assembly of a bipolar spindle, consisting of two antiparallel microtubule (MT) arrays having most of their minus ends focused at the spindle poles and their plus ends overlapping in the spindle midzone. Spindle assembly, chromosome alignment and segregation require highly dynamic MTs. The plus ends of MTs have been extensively investigated; instead, their minus end structure remains poorly characterized. Here, we used large-scale electron tomography to study the morphology of the MT minus ends in 3D-reconstructed metaphase spindles in HeLa cells. In contrast to the homogeneous open morphology of the MT plus ends at the kinetochores, we found that MT minus ends are heterogeneous showing either open or closed morphologies. Silencing the minus-end specific stabilizer, MCRS1 increased the proportion of open MT minus ends. Altogether, these data suggest a correlation between the morphology and the dynamic state of the MT ends. Taking this heterogeneity of the MT minus end morphologies into account, our work indicates an unsynchronized behavior of MTs at the spindle poles, thus laying the ground for further studies on the complexity of MT dynamics regulation.}, language = {en} } @inproceedings{MayerBaumAmbellanetal.2022, author = {Mayer, Julius and Baum, Daniel and Ambellan, Felix and von Tycowicz, Christoph}, title = {A Soft-Correspondence Approach to Shape-based Disease Grading with Graph Convolutional Networks}, volume = {194}, booktitle = {Proceedings of Machine Learning Research}, pages = {85 -- 95}, year = {2022}, abstract = {Shape analysis provides principled means for understanding anatomical structures from medical images. The underlying notions of shape spaces, however, come with strict assumptions prohibiting the analysis of incomplete and/or topologically varying shapes. This work aims to alleviate these limitations by adapting the concept of soft correspondences. In particular, we present a graph-based learning approach for morphometric classification of disease states that is based on a generalized notion of shape correspondences in terms of functional maps. We demonstrate the performance of the derived classifier on the open-access ADNI database for differentiating normal controls and subjects with Alzheimer's disease. Notably, our experiment shows that our approach can improve over state-of-the-art from geometric deep learning.}, language = {en} } @article{MikulaDoerffelBaumetal.2022, author = {Mikula, Natalia and D{\"o}rffel, Tom and Baum, Daniel and Hege, Hans-Christian}, title = {An Interactive Approach for Identifying Structure Definitions}, volume = {41}, journal = {Computer Graphics Forum}, number = {3}, arxiv = {http://arxiv.org/abs/arxiv:2112.09066}, doi = {10.1111/cgf.14543}, pages = {321 -- 332}, year = {2022}, abstract = {Our ability to grasp and understand complex phenomena is essentially based on recognizing structures and relating these to each other. For example, any meteorological description of a weather condition and explanation of its evolution recurs to meteorological structures, such as convection and circulation structures, cloud fields and rain fronts. All of these are spatiotemporal structures, defined by time-dependent patterns in the underlying fields. Typically, such a structure is defined by a verbal description that corresponds to the more or less uniform, often somewhat vague mental images of the experts. However, a precise, formal definition of the structures or, more generally, concepts is often desirable, e.g., to enable automated data analysis or the development of phenomenological models. Here, we present a systematic approach and an interactive tool to obtain formal definitions of spatiotemporal structures. The tool enables experts to evaluate and compare different structure definitions on the basis of data sets with time-dependent fields that contain the respective structure. Since structure definitions are typically parameterized, an essential part is to identify parameter ranges that lead to desired structures in all time steps. In addition, it is important to allow a quantitative assessment of the resulting structures simultaneously. We demonstrate the use of the tool by applying it to two meteorological examples: finding structure definitions for vortex cores and center lines of temporarily evolving tropical cyclones. Ideally, structure definitions should be objective and applicable to as many data sets as possible. However, finding such definitions, e.g., for the common atmospheric structures in meteorology, can only be a long-term goal. The proposed procedure, together with the presented tool, is just a first systematic approach aiming at facilitating this long and arduous way.}, language = {en} } @article{BerioBayleBaumetal.2022, author = {Berio, Fidji and Bayle, Yann and Baum, Daniel and Goudemand, Nicolas and Debiais-Thibaud, M{\´e}lanie}, title = {Hide and seek shark teeth in Random Forests: Machine learning applied to Scyliorhinus canicula populations}, journal = {PeerJ - Aquatic Biology}, doi = {10.7717/peerj.13575}, pages = {10:e13575}, year = {2022}, abstract = {Shark populations that are distributed alongside a latitudinal gradient often display body size differences at sexual maturity and vicariance patterns related to their number of tooth files. Previous works have demonstrated that Scyliorhinus canicula exhibits distinct genetic structures, life history traits, and body size differences between populations inhabiting the North Atlantic Ocean and the Mediterranean Sea. In this work, we sample more than 3,000 S. canicula teeth from 56 specimens and provide and use a dataset containing their shape coordinates. We investigate tooth shape and form differences between a Mediterranean and an Atlantic S. canicula population using two approaches. Classification results show that the classical geometric morphometric framework is outperformed by an original Random Forests-based framework. Visually, both S. canicula populations share similar ontogenetic trends and timing of gynandric heterodonty emergence but the Atlantic population has bigger, blunter teeth, and less numerous accessory cusps than the Mediterranean population. According to the models, the populations are best differentiated based on their lateral tooth edges, which bear accessory cusps, and the tooth centroid sizes significantly improve classification performances. The differences observed are discussed in light of dietary and behavioural habits of the populations considered. The method proposed in this study could be further adapted to complement DNA analyses to identify shark species or populations based on tooth morphologies. This process would be of particular interest for fisheries management and identification of shark fossils.}, language = {en} } @misc{BerioBayleAgretetal.2022, author = {Berio, Fidji and Bayle, Yann and Agret, Sylvie and Baum, Daniel and Goudemand, Nicolas and Debiais-Thibaud, M{\´e}lanie}, title = {3D models related to the publication: Hide and seek shark teeth in Random Forests: Machine learning applied to Scyliorhinus canicula}, journal = {MorphoMuseuM}, doi = {10.18563/journal.m3.164}, year = {2022}, abstract = {The present dataset contains the 3D models analyzed in Berio, F., Bayle, Y., Baum, D., Goudemand, N., and Debiais-Thibaud, M. 2022. Hide and seek shark teeth in Random Forests: Machine learning applied to Scyliorhinus canicula. It contains the head surfaces of 56 North Atlantic and Mediterranean small-spotted catsharks Scyliorhinus canicula, from which tooth surfaces were further extracted to perform geometric morphometrics and machine learning.}, language = {en} } @article{EhlersBaumMuehlethaleretal.2022, author = {Ehlers, Sarah and Baum, Daniel and M{\"u}hlethaler, Roland and Hoch, Hannelore and Br{\"a}unig, Peter}, title = {Large abdominal mechanoreceptive sense organs in small plant-dwelling insects}, volume = {18}, journal = {Biology Letters}, number = {4}, doi = {10.1098/rsbl.2022.0078}, year = {2022}, abstract = {The Hemiptera is the largest non-endopterygote insect order comprising approximately 98,000 recent species. All species of the suborders Cicadomorpha (leafhoppers, spittlebugs, treehoppers and cicadas) and Fulgoromorpha (planthoppers) feed by sucking sap from plant tissues and are thus often vectors for economically important phytopathogens. Except for the cicadas (Cicadomorpha: Cicadoidea: Cicadidae) which produce air-borne sounds, all species of the suborders Cicadomorpha and Fulgoromorpha communicate by vibrational (substrate-borne) signals. While the generation of these signals has been extensively investigated, the mechanisms of perception are poorly understood. This study provides a full description and 3D reconstruction of a large and complex array of six paired chordotonal organs in the first abdominal segments of the Rhododendron leafhopper Graphocephala fennahi (Cicadomorpha: Membracoidea: Cicadellidae). Further we were able to identify homologous organs in the closely related spittlebug Philaenus spumarius (Cicadomorpha: Cercopoidea: Aphrophoridae) and the planthopper Issus coleoptratus (Fulgoromorpha: Fulgoroidea: Issidae). The configuration is congruent with the abdominal chordotonal organs in cicadas, where one of them is an elaborate tympanal organ. This indicates that these organs, together with the tymbal organ constitute a synapomorphy of the Tymbalia (Hemiptera excl. Sternorrhyncha). Our results contribute to the understanding of the evolution from substrate-borne to airborne communication in insects.}, language = {en} } @inproceedings{PaskinDeanBaumetal.2022, author = {Paskin, Martha and Dean, Mason and Baum, Daniel and von Tycowicz, Christoph}, title = {A Kendall Shape Space Approach to 3D Shape Estimation from 2D Landmarks}, booktitle = {Computer Vision -- ECCV 2022}, publisher = {Springer Nature Switzerland}, arxiv = {http://arxiv.org/abs/2207.12687}, doi = {10.1007/978-3-031-20086-1_21}, pages = {363 -- 379}, year = {2022}, abstract = {3D shapes provide substantially more information than 2D images. However, the acquisition of 3D shapes is sometimes very difficult or even impossible in comparison with acquiring 2D images, making it necessary to derive the 3D shape from 2D images. Although this is, in general, a mathematically ill-posed problem, it might be solved by constraining the problem formulation using prior information. Here, we present a new approach based on Kendall's shape space to reconstruct 3D shapes from single monocular 2D images. The work is motivated by an application to study the feeding behavior of the basking shark, an endangered species whose massive size and mobility render 3D shape data nearly impossible to obtain, hampering understanding of their feeding behaviors and ecology. 2D images of these animals in feeding position, however, are readily available. We compare our approach with state-of-the-art shape-based approaches both on human stick models and on shark head skeletons. Using a small set of training shapes, we show that the Kendall shape space approach is substantially more robust than previous methods and always results in plausible shapes. This is essential for the motivating application in which specimens are rare and therefore only few training shapes are available.}, language = {en} }