@inproceedings{AmbellanTackWilsonetal., author = {Ambellan, Felix and Tack, Alexander and Wilson, Dave and Anglin, Carolyn and Lamecker, Hans and Zachow, Stefan}, title = {Evaluating two methods for Geometry Reconstruction from Sparse Surgical Navigation Data}, series = {Proceedings of the Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboterassistierte Chirurgie (CURAC)}, volume = {16}, booktitle = {Proceedings of the Jahrestagung der Deutschen Gesellschaft f{\"u}r Computer- und Roboterassistierte Chirurgie (CURAC)}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-65339}, pages = {24 -- 30}, abstract = {In this study we investigate methods for fitting a Statistical Shape Model (SSM) to intraoperatively acquired point cloud data from a surgical navigation system. We validate the fitted models against the pre-operatively acquired Magnetic Resonance Imaging (MRI) data from the same patients. We consider a cohort of 10 patients who underwent navigated total knee arthroplasty. As part of the surgical protocol the patients' distal femurs were partially digitized. All patients had an MRI scan two months pre-operatively. The MRI data were manually segmented and the reconstructed bone surfaces used as ground truth against which the fit was compared. Two methods were used to fit the SSM to the data, based on (1) Iterative Closest Points (ICP) and (2) Gaussian Mixture Models (GMM). For both approaches, the difference between model fit and ground truth surface averaged less than 1.7 mm and excellent correspondence with the distal femoral morphology can be demonstrated.}, language = {en} } @article{AkbariShandizBoulosSavarssonetal.2017, author = {Akbari Shandiz, Mohsen and Boulos, Paul and S{\ae}varsson, Stefan and Ramm, Heiko and Fu, Chun Kit and Miller, Stephen and Zachow, Stefan and Anglin, Carolyn}, title = {Changes in Knee Shape and Geometry Resulting from Total Knee Arthroplasty}, series = {Journal of Engineering in Medicine}, volume = {232}, journal = {Journal of Engineering in Medicine}, number = {1}, doi = {10.1177/0954411917743274}, pages = {67 -- 79}, year = {2017}, abstract = {Changes in knee shape and geometry resulting from total knee arthroplasty can affect patients in numerous important ways: pain, function, stability, range of motion, and kinematics. Quantitative data concerning these changes have not been previously available, to our knowledge, yet are essential to understand individual experiences of total knee arthroplasty and thereby improve outcomes for all patients. The limiting factor has been the challenge of accurately measuring these changes. Our study objective was to develop a conceptual framework and analysis method to investigate changes in knee shape and geometry, and prospectively apply it to a sample total knee arthroplasty population. Using clinically available computed tomography and radiography imaging systems, the three-dimensional knee shape and geometry of nine patients (eight varus and one valgus) were compared before and after total knee arthroplasty. All patients had largely good outcomes after their total knee arthroplasty. Knee shape changed both visually and numerically. On average, the distal condyles were slightly higher medially and lower laterally (range: +4.5 mm to -4.4 mm), the posterior condyles extended farther out medially but not laterally (range: +1.8 to -6.4 mm), patellofemoral distance increased throughout flexion by 1.8-3.5 mm, and patellar thickness alone increased by 2.9 mm (range: 0.7-5.2 mm). External femoral rotation differed preop and postop. Joint line distance, taking cartilage into account, changed by +0.7 to -1.5 mm on average throughout flexion. Important differences in shape and geometry were seen between pre-total knee arthroplasty and post-total knee arthroplasty knees. While this is qualitatively known, this is the first study to report it quantitatively, an important precursor to identifying the reasons for the poor outcome of some patients. Using the developed protocol and visualization techniques to compare patients with good versus poor clinical outcomes could lead to changes in implant design, implant selection, component positioning, and surgical technique. Recommendations based on this sample population are provided. Intraoperative and postoperative feedback could ultimately improve patient satisfaction.}, language = {en} } @article{SaevarssonSharmaAmirietal.2012, author = {Saevarsson, Stefan and Sharma, Gulshan and Amiri, Shahram and Montgomery, Sigrun and Ramm, Heiko and Lichti, Derek and Lieck, Robert and Zachow, Stefan and Anglin, Carolyn}, title = {Radiological method for measuring patellofemoral tracking and tibiofemoral kinematics before and after total knee replacement}, series = {Bone and Joint Research}, volume = {1}, journal = {Bone and Joint Research}, number = {10}, doi = {10.1302/2046-3758.110.2000117}, pages = {263 -- 271}, year = {2012}, language = {en} } @misc{SharmaHoSaevarssonetal.2012, author = {Sharma, Gulshan and Ho, Karen and Saevarsson, Stefan and Ramm, Heiko and Lieck, Robert and Zachow, Stefan and Anglin, Carolyn}, title = {Knee Pose and Geometry Pre- and Post-Total Knee Arthroplasty Using Computed Tomography}, series = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, journal = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, address = {San Francisco, CA}, year = {2012}, language = {en} } @misc{SharmaSaevarssonAmirietal.2012, author = {Sharma, Gulshan and Saevarsson, Stefan and Amiri, Shahram and Montgomery, Sigrun and Ramm, Heiko and Lichti, Derek and Zachow, Stefan and Anglin, Carolyn}, title = {Sequential-Biplane Radiography for Measuring Pre and Post Total Knee Arthroplasty Kinematics}, series = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, journal = {58th Annual Meeting of the Orthopaedic Research Society (ORS)}, address = {San Francisco, CA}, year = {2012}, language = {en} } @inproceedings{StefanGulshanSigrunetal.2012, author = {Stefan, Saevarsson and Gulshan, Sharma and Sigrun, Montgomery and Karen, Ho and Ramm, Heiko and Lieck, Robert and Zachow, Stefan and Hutchison, Carol and Jason, Werle and Carolyn, Anglin}, title = {Kinematic Comparison Between Gender Specific and Traditional Femoral Implants}, series = {67th Canadian Orthopaedic Association (COA) Annual Meeting}, booktitle = {67th Canadian Orthopaedic Association (COA) Annual Meeting}, year = {2012}, language = {en} } @article{HoSaevarssonRammetal.2012, author = {Ho, Karen and Saevarsson, Stefan and Ramm, Heiko and Lieck, Robert and Zachow, Stefan and Sharma, Gulshan and Rex, Erica and Amiri, Shahram and Wu, Barnabas and Leumann, Andre and Anglin, Carolyn}, title = {Computed tomography analysis of knee pose and geometry before and after total knee arthroplasty}, series = {Journal of biomechanics}, volume = {45}, journal = {Journal of biomechanics}, number = {13}, doi = {10.1016/j.jbiomech.2012.06.004}, pages = {2215 -- 21}, year = {2012}, language = {en} } @article{SaevarssonSharmaRammetal.2013, author = {Saevarsson, Stefan and Sharma, Gulshan and Ramm, Heiko and Lieck, Robert and Hutchison, Carol and Werle, Jason and Montgomery, Sigrun and Romeo, Carolina and Zachow, Stefan and Anglin, Carolyn}, title = {Kinematic Differences Between Gender Specific And Traditional Knee Implants}, series = {The Journal of Arthroplasty}, volume = {28}, journal = {The Journal of Arthroplasty}, number = {9}, doi = {10.1016/j.arth.2013.01.021}, pages = {1543 -- 1550}, year = {2013}, language = {en} } @misc{AmbellanTackWilsonetal., author = {Ambellan, Felix and Tack, Alexander and Wilson, Dave and Anglin, Carolyn and Lamecker, Hans and Zachow, Stefan}, title = {Evaluating two methods for Geometry Reconstruction from Sparse Surgical Navigation Data}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-66052}, abstract = {In this study we investigate methods for fitting a Statistical Shape Model (SSM) to intraoperatively acquired point cloud data from a surgical navigation system. We validate the fitted models against the pre-operatively acquired Magnetic Resonance Imaging (MRI) data from the same patients. We consider a cohort of 10 patients who underwent navigated total knee arthroplasty. As part of the surgical protocol the patients' distal femurs were partially digitized. All patients had an MRI scan two months pre-operatively. The MRI data were manually segmented and the reconstructed bone surfaces used as ground truth against which the fit was compared. Two methods were used to fit the SSM to the data, based on (1) Iterative Closest Points (ICP) and (2) Gaussian Mixture Models (GMM). For both approaches, the difference between model fit and ground truth surface averaged less than 1.7 mm and excellent correspondence with the distal femoral morphology can be demonstrated.}, language = {en} } @inproceedings{EhlkeFrenzelRammetal., author = {Ehlke, Moritz and Frenzel, Thomas and Ramm, Heiko and Shandiz, Mohsen Akbari and Anglin, Carolyn and Zachow, Stefan}, title = {Towards Robust Measurement Of Pelvic Parameters From AP Radiographs Using Articulated 3D Models}, series = {Computer Assisted Radiology and Surgery (CARS)}, booktitle = {Computer Assisted Radiology and Surgery (CARS)}, abstract = {Patient-specific parameters such as the orientation of the acetabulum or pelvic tilt are useful for custom planning for total hip arthroplasty (THA) and for evaluating the outcome of surgical interventions. The gold standard in obtaining pelvic parameters is from three-dimensional (3D) computed tomography (CT) imaging. However, this adds time and cost, exposes the patient to a substantial radiation dose, and does not allow for imaging under load (e.g. while the patient is standing). If pelvic parameters could be reliably derived from the standard anteroposterior (AP) radiograph, preoperative planning would be more widespread, and research analyses could be applied to retrospective data, after a postoperative issue is discovered. The goal of this work is to enable robust measurement of two surgical parameters of interest: the tilt of the anterior pelvic plane (APP) and the orientation of the natural acetabulum. We present a computer-aided reconstruction method to determine the APP and natural acetabular orientation from a single, preoperative X-ray. It can easily be extended to obtain other important preoperative and postoperative parameters solely based on a single AP radiograph.}, language = {en} } @misc{EhlkeFrenzelRammetal., author = {Ehlke, Moritz and Frenzel, Thomas and Ramm, Heiko and Shandiz, Mohsen Akbari and Anglin, Carolyn and Zachow, Stefan}, title = {Towards Robust Measurement of Pelvic Parameters from AP Radiographs using Articulated 3D Models}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-53707}, abstract = {Patient-specific parameters such as the orientation of the acetabulum or pelvic tilt are useful for custom planning for total hip arthroplasty (THA) and for evaluating the outcome of surgical interventions. The gold standard in obtaining pelvic parameters is from three-dimensional (3D) computed tomography (CT) imaging. However, this adds time and cost, exposes the patient to a substantial radiation dose, and does not allow for imaging under load (e.g. while the patient is standing). If pelvic parameters could be reliably derived from the standard anteroposterior (AP) radiograph, preoperative planning would be more widespread, and research analyses could be applied to retrospective data, after a postoperative issue is discovered. The goal of this work is to enable robust measurement of two surgical parameters of interest: the tilt of the anterior pelvic plane (APP) and the orientation of the natural acetabulum. We present a computer-aided reconstruction method to determine the APP and natural acetabular orientation from a single, preoperative X-ray. It can easily be extended to obtain other important preoperative and postoperative parameters solely based on a single AP radiograph.}, language = {en} } @misc{EhlkeFrenzelRammetal., author = {Ehlke, Moritz and Frenzel, Thomas and Ramm, Heiko and Lamecker, Hans and Akbari Shandiz, Mohsen and Anglin, Carolyn and Zachow, Stefan}, title = {Robust Measurement of Natural Acetabular Orientation from AP Radiographs using Articulated 3D Shape and Intensity Models}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-49824}, language = {en} } @article{WilsonAnglinAmbellanetal., author = {Wilson, David and Anglin, Carolyn and Ambellan, Felix and Grewe, Carl Martin and Tack, Alexander and Lamecker, Hans and Dunbar, Michael and Zachow, Stefan}, title = {Validation of three-dimensional models of the distal femur created from surgical navigation point cloud data for intraoperative and postoperative analysis of total knee arthroplasty}, series = {International Journal of Computer Assisted Radiology and Surgery}, volume = {12}, journal = {International Journal of Computer Assisted Radiology and Surgery}, number = {12}, publisher = {Springer}, doi = {10.1007/s11548-017-1630-5}, pages = {2097 -- 2105}, abstract = {Purpose: Despite the success of total knee arthroplasty there continues to be a significant proportion of patients who are dissatisfied. One explanation may be a shape mismatch between pre and post-operative distal femurs. The purpose of this study was to investigate a method to match a statistical shape model (SSM) to intra-operatively acquired point cloud data from a surgical navigation system, and to validate it against the pre-operative magnetic resonance imaging (MRI) data from the same patients. Methods: A total of 10 patients who underwent navigated total knee arthroplasty also had an MRI scan less than 2 months pre-operatively. The standard surgical protocol was followed which included partial digitization of the distal femur. Two different methods were employed to fit the SSM to the digitized point cloud data, based on (1) Iterative Closest Points (ICP) and (2) Gaussian Mixture Models (GMM). The available MRI data were manually segmented and the reconstructed three-dimensional surfaces used as ground truth against which the statistical shape model fit was compared. Results: For both approaches, the difference between the statistical shape model-generated femur and the surface generated from MRI segmentation averaged less than 1.7 mm, with maximum errors occurring in less clinically important areas. Conclusion: The results demonstrated good correspondence with the distal femoral morphology even in cases of sparse data sets. Application of this technique will allow for measurement of mismatch between pre and post-operative femurs retrospectively on any case done using the surgical navigation system and could be integrated into the surgical navigation unit to provide real-time feedback.}, language = {en} } @misc{WilsonBuecherGreweetal., author = {Wilson, David and B{\"u}cher, Pia and Grewe, Carl Martin and Anglin, Carolyn and Zachow, Stefan and Michael, Dunbar}, title = {Validation of Three Dimensional Models of the Distal Femur Created from Surgical Navigation Point Cloud Data}, series = {15th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery (CAOS)}, journal = {15th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery (CAOS)}, language = {en} } @misc{WilsonBuecherGreweetal., author = {Wilson, David and B{\"u}cher, Pia and Grewe, Carl Martin and Mocanu, Valentin and Anglin, Carolyn and Zachow, Stefan and Dunbar, Michael}, title = {Validation of Three Dimensional Models of the Distal Femur Created from Surgical Navigation Data}, series = {Orthopedic Research Society Annual Meeting}, journal = {Orthopedic Research Society Annual Meeting}, address = {Las Vegas, Nevada}, language = {en} }