@misc{DeuflhardHegeSeebass, author = {Deuflhard, Peter and Hege, Hans-Christian and Seebass, Martin}, title = {Progress Towards a Combined MRI/Hyperthermia System}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-5755}, number = {00-07}, abstract = {Regional hyperthermia, a clinical cancer therapy, is the main topic of the Sonderforschungsbereich Hyperthermia: Scientific Methods and Clinical Applications'' at Berlin. In recent years, technological improvements towards a better concentration of heat to the desired target region have been achieved. These include a rather sophisticated integrated software environment for therapy planning and a new hyperthermia applicator. In a next step, a detailed closed loop monitoring of the actual treatment is to be developed. For this purpose the hyperthermia applicator is combined with an MRI system, which will allow to check the positioning of the patients and to measure individual blood perfusion as well as the 3D temperature distribution. The measurements will then be employed for an on-line control of the whole treatment. In this intended setting, new fast feedback control algorithms will come into play.}, language = {en} } @misc{DeuflhardSeebass, author = {Deuflhard, Peter and Seebass, Martin}, title = {Adaptive Multilevel FEM as Decisive Tools in the Clinical Cancer Therapy Hyperthermia}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-3739}, number = {SC-98-30}, abstract = {The paper surveys recent progress in a joint mathematical-medical project on cancer therapy planning. Within so-called regional hyperthermia the computational task is to tune a set of coupled radiofrequency antennas such that a carefully measured tumor is locally heated, but any outside hot spots are avoided. A mathematical model of the whole clinical system -- air, applicator with antennas, water bolus, individual patient body -- involves Maxwell's equations in inhomogeneous media and a parabolic bioheat transfer equation, which represents a simplified model of heat transfer in the human body (ignoring strong blood vessel heat transport). Both PDEs need to be computed fast and to medical reliability (!) on a workstation within a clinical environment. This requirement triggered a series of new algorithmic developments to be reported here, among which is an adaptive multilevel FEM for Maxwell's equations, which dominates the numerical simulation time. In total, however, the main bulk of computation time (see Table 3 in Section 4 below) still goes into segmentation -- a necessary preprocessing step in the construction a 3D virtual patient from the input of a stack of 2D computed tomograms (left out here).}, language = {en} } @misc{DeuflhardWeiserSeebass, author = {Deuflhard, Peter and Weiser, Martin and Seebass, Martin}, title = {A New Nonlinear Elliptic Multilevel FEM Applied to Regional Hyperthermia}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-3785}, number = {SC-98-35}, abstract = {In the clinical cancer therapy of regional hyperthermia nonlinear perfusion effects inside and outside the tumor seem to play a not negligible role. A stationary model of such effects leads to a nonlinear Helmholtz term within an elliptic boundary value problem. The present paper reports about the application of a recently designed adaptive multilevel FEM to this problem. For several 3D virtual patients, nonlinear versus linear model is studied. Moreover, the numerical efficiency of the new algorithm is compared with a former application of an adaptive FEM to the corresponding instationary model PDE.}, language = {en} }