@misc{KaplanLauferProhaskaetal.2017, author = {Kaplan, Bernhard and Laufer, Jan and Prohaska, Steffen and Buchmann, Jens}, title = {Monte-Carlo-based inversion scheme for 3D quantitative photoacoustic tomography}, issn = {1438-0064}, doi = {10.1117/12.2251945}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-62318}, year = {2017}, abstract = {The goal of quantitative photoacoustic tomography (qPAT) is to recover maps of the chromophore distributions from multiwavelength images of the initial pressure. Model-based inversions that incorporate the physical processes underlying the photoacoustic (PA) signal generation represent a promising approach. Monte-Carlo models of the light transport are computationally expensive, but provide accurate fluence distributions predictions, especially in the ballistic and quasi-ballistic regimes. Here, we focus on the inverse problem of 3D qPAT of blood oxygenation and investigate the application of the Monte-Carlo method in a model-based inversion scheme. A forward model of the light transport based on the MCX simulator and acoustic propagation modeled by the k-Wave toolbox was used to generate a PA image data set acquired in a tissue phantom over a planar detection geometry. The combination of the optical and acoustic models is shown to account for limited-view artifacts. In addition, the errors in the fluence due to, for example, partial volume artifacts and absorbers immediately adjacent to the region of interest are investigated. To accomplish large-scale inversions in 3D, the number of degrees of freedom is reduced by applying image segmentation to the initial pressure distribution to extract a limited number of regions with homogeneous optical parameters. The absorber concentration in the tissue phantom was estimated using a coordinate descent parameter search based on the comparison between measured and modeled PA spectra. The estimated relative concentrations using this approach lie within 5 \% compared to the known concentrations. Finally, we discuss the feasibility of this approach to recover the blood oxygenation from experimental data.}, language = {en} } @inproceedings{KaplanBuchmannProhaskaetal.2017, author = {Kaplan, Bernhard and Buchmann, Jens and Prohaska, Steffen and Laufer, Jan}, title = {Monte-Carlo-based inversion scheme for 3D quantitative photoacoustic tomography}, volume = {10064}, booktitle = {Proc. of SPIE, Photons Plus Ultrasound: Imaging and Sensing 2017}, doi = {10.1117/12.2251945}, pages = {100645J -- 100645J-13}, year = {2017}, abstract = {The goal of quantitative photoacoustic tomography (qPAT) is to recover maps of the chromophore distributions from multiwavelength images of the initial pressure. Model-based inversions that incorporate the physical processes underlying the photoacoustic (PA) signal generation represent a promising approach. Monte-Carlo models of the light transport are computationally expensive, but provide accurate fluence distributions predictions, especially in the ballistic and quasi-ballistic regimes. Here, we focus on the inverse problem of 3D qPAT of blood oxygenation and investigate the application of the Monte-Carlo method in a model-based inversion scheme. A forward model of the light transport based on the MCX simulator and acoustic propagation modeled by the k-Wave toolbox was used to generate a PA image data set acquired in a tissue phantom over a planar detection geometry. The combination of the optical and acoustic models is shown to account for limited-view artifacts. In addition, the errors in the fluence due to, for example, partial volume artifacts and absorbers immediately adjacent to the region of interest are investigated. To accomplish large-scale inversions in 3D, the number of degrees of freedom is reduced by applying image segmentation to the initial pressure distribution to extract a limited number of regions with homogeneous optical parameters. The absorber concentration in the tissue phantom was estimated using a coordinate descent parameter search based on the comparison between measured and modeled PA spectra. The estimated relative concentrations using this approach lie within 5 \% compared to the known concentrations. Finally, we discuss the feasibility of this approach to recover the blood oxygenation from experimental data.}, language = {en} } @inproceedings{BuchmannKaplanProhaskaetal.2017, author = {Buchmann, Jens and Kaplan, Bernhard and Prohaska, Steffen and Laufer, Jan}, title = {Experimental validation of a Monte-Carlo-based inversion scheme for 3D quantitative photoacoustic tomography}, volume = {10064}, booktitle = {Proc. of SPIE, Photons Plus Ultrasound: Imaging and Sensing}, doi = {10.1117/12.2252359}, pages = {1006416 -- 1006416-8}, year = {2017}, abstract = {Quantitative photoacoustic tomography (qPAT) aims to extract physiological parameters, such as blood oxygen saturation (sO2), from measured multi-wavelength image data sets. The challenge of this approach lies in the inherently nonlinear fluence distribution in the tissue, which has to be accounted for by using an appropriate model, and the large scale of the inverse problem. In addition, the accuracy of experimental and scanner-specific parameters, such as the wavelength dependence of the incident fluence, the acoustic detector response, the beam profile and divergence, needs to be considered. This study aims at quantitative imaging of blood sO2, as it has been shown to be a more robust parameter compared to absolute concentrations. We propose a Monte-Carlo-based inversion scheme in conjunction with a reduction in the number of variables achieved using image segmentation. The inversion scheme is experimentally validated in tissue-mimicking phantoms consisting of polymer tubes suspended in a scattering liquid. The tubes were filled with chromophore solutions at different concentration ratios. 3-D multi-spectral image data sets were acquired using a Fabry-Perot based PA scanner. A quantitative comparison of the measured data with the output of the forward model is presented. Parameter estimates of chromophore concentration ratios were found to be within 5 \% of the true values.}, language = {en} } @misc{ZhukovaHiepenKnausetal.2017, author = {Zhukova, Yulia and Hiepen, Christian and Knaus, Petra and Osterland, Marc and Prohaska, Steffen and Dunlop, John W. C. and Fratzl, Peter and Skorb, Ekaterina V.}, title = {The role of titanium surface nanotopography on preosteoblast morphology, adhesion and migration}, issn = {1438-0064}, doi = {10.1002/adhm.201601244}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-63053}, year = {2017}, abstract = {Surface structuring of titanium-based implants with appropriate nanotopographies can significantly modulate their impact on the biological behavior of cells populating these implants. Implant assisted bone tissue repair and regeneration require functional adhesion and expansion of bone progenitors. The surface nanotopography of implant materials used to support bone healing and its effect on cell behavior, in particular cell adhesion, spreading, expansion, and motility, is still not clearly understood. The aim of this study is to investigate preosteoblast proliferation, adhesion, morphology, and migration on different titanium materials with similar surface chemistry, but distinct nanotopographical features. Sonochemical treatment and anodic oxidation were employed to fabricate disordered - mesoporous titania (TMS), and ordered - titania nanotubular (TNT) topographies respectively. The morphological evaluation revealed a surface dependent shape, thickness, and spreading of cells owing to different adherence behavior. Cells were polygonal-shaped and well-spread on glass and TMS, but displayed an elongated fibroblast-like morphology on TNT surfaces. The cells on glass however, were much flatter than on nanostructured surfaces. Both nanostructured surfaces impaired cell adhesion, but TMS was more favorable for cell growth due to its support of cell attachment and spreading in contrast to TNT. Quantitative wound healing assay in combination with live-cell imaging revealed that cells seeded on TMS surfaces migrated in close proximity to neighboring cells and less directed when compared to the migratory behavior on other surfaces. The results indicate distinctly different cell adhesion and migration on ordered and disordered titania nanotopographies, providing important information that could be used in optimizing titanium-based scaffold design to foster bone tissue growth and repair.}, language = {en} } @article{HombergBaumProhaskaetal.2017, author = {Homberg, Ulrike and Baum, Daniel and Prohaska, Steffen and G{\"u}nster, Jens and Krauß-Sch{\"u}ler, Stefanie}, title = {Adapting trabecular structures for 3D printing: an image processing approach based on µCT data}, volume = {3}, journal = {Biomedical Physics \& Engineering Express}, number = {3}, publisher = {IOP Publishing}, doi = {10.1088/2057-1976/aa7611}, year = {2017}, abstract = {Materials with a trabecular structure notably combine advantages such as lightweight, reasonable strength, and permeability for fluids. This combination of advantages is especially interesting for tissue engineering in trauma surgery and orthopedics. Bone-substituting scaffolds for instance are designed with a trabecular structure in order to allow cell migration for bone ingrowth and vascularization. An emerging and recently very popular technology to produce such complex, porous structures is 3D printing. However, several technological aspects regarding the scaffold architecture, the printable resolution, and the feature size have to be considered when fabricating scaffolds for bone tissue replacement and regeneration. Here, we present a strategy to assess and prepare realistic trabecular structures for 3D printing using image analysis with the aim of preserving the structural elements. We discuss critical conditions of the printing system and present a 3-stage approach to adapt a trabecular structure from \$\mu\$CT data while incorporating knowledge about the printing system. In the first stage, an image-based extraction of solid and void structures is performed, which results in voxel- and graph-based representations of the extracted structures. These representations not only allow us to quantify geometrical properties such as pore size or strut geometry and length. But, since the graph represents the geometry and the topology of the initial structure, it can be used in the second stage to modify and adjust feature size, volume and sample size in an easy and consistent way. In the final reconstruction stage, the graph is then converted into a voxel representation preserving the topology of the initial structure. This stage generates a model with respect to the printing conditions to ensure a stable and controlled voxel placement during the printing process.}, language = {en} } @misc{HombergBaumProhaskaetal.2017, author = {Homberg, Ulrike and Baum, Daniel and Prohaska, Steffen and G{\"u}nster, Jens and Krauß-Sch{\"u}ler, Stefanie}, title = {Adapting trabecular structures for 3D printing: an image processing approach based on µCT data}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-64004}, year = {2017}, abstract = {Materials with a trabecular structure notably combine advantages such as lightweight, reasonable strength, and permeability for fluids. This combination of advantages is especially interesting for tissue engineering in trauma surgery and orthopedics. Bone-substituting scaffolds for instance are designed with a trabecular structure in order to allow cell migration for bone ingrowth and vascularization. An emerging and recently very popular technology to produce such complex, porous structures is 3D printing. However, several technological aspects regarding the scaffold architecture, the printable resolution, and the feature size have to be considered when fabricating scaffolds for bone tissue replacement and regeneration. Here, we present a strategy to assess and prepare realistic trabecular structures for 3D printing using image analysis with the aim of preserving the structural elements. We discuss critical conditions of the printing system and present a 3-stage approach to adapt a trabecular structure from \$\mu\$CT data while incorporating knowledge about the printing system. In the first stage, an image-based extraction of solid and void structures is performed, which results in voxel- and graph-based representations of the extracted structures. These representations not only allow us to quantify geometrical properties such as pore size or strut geometry and length. But, since the graph represents the geometry and the topology of the initial structure, it can be used in the second stage to modify and adjust feature size, volume and sample size in an easy and consistent way. In the final reconstruction stage, the graph is then converted into a voxel representation preserving the topology of the initial structure. This stage generates a model with respect to the printing conditions to ensure a stable and controlled voxel placement during the printing process.}, language = {en} } @article{RedemannBaumgartLindowetal.2017, author = {Redemann, Stefanie and Baumgart, Johannes and Lindow, Norbert and Shelley, Michael and Nazockdast, Ehssan and Kratz, Andrea and Prohaska, Steffen and Brugu{\´e}s, Jan and F{\"u}rthauer, Sebastian and M{\"u}ller-Reichert, Thomas}, title = {C. elegans chromosomes connect to centrosomes by anchoring into the spindle network}, volume = {8}, journal = {Nature Communications}, number = {15288}, doi = {10.1038/ncomms15288}, year = {2017}, abstract = {The mitotic spindle ensures the faithful segregation of chromosomes. Here we combine the first large-scale serial electron tomography of whole mitotic spindles in early C. elegans embryos with live-cell imaging to reconstruct all microtubules in 3D and identify their plus- and minus-ends. We classify them as kinetochore (KMTs), spindle (SMTs) or astral microtubules (AMTs) according to their positions, and quantify distinct properties of each class. While our light microscopy and mutant studies show that microtubules are nucleated from the centrosomes, we find only a few KMTs directly connected to the centrosomes. Indeed, by quantitatively analysing several models of microtubule growth, we conclude that minus-ends of KMTs have selectively detached and depolymerized from the centrosome. In toto, our results show that the connection between centrosomes and chromosomes is mediated by an anchoring into the entire spindle network and that any direct connections through KMTs are few and likely very transient.}, language = {en} } @article{PaetschBaumProhaskaetal.2014, author = {Paetsch, Olaf and Baum, Daniel and Prohaska, Steffen and Ehrig, Karsten and Ebell, Gino and Meinel, Dietmar and Heyn, Andreas}, title = {Korrosionsverfolgung in 3D-computertomographischen Aufnahmen von Stahlbetonproben}, journal = {DGZfP-Jahrestagung 2014 Konferenzband}, year = {2014}, language = {de} } @misc{PaetschBaumEbelletal.2014, author = {Paetsch, Olaf and Baum, Daniel and Ebell, Gino and Ehrig, Karsten and Heyn, Andreas and Meinel, Dietmar and Prohaska, Steffen}, title = {Korrosionsverfolgung in 3D-computertomographischen Aufnahmen von Stahlbetonproben}, issn = {1438-0064}, url = {http://nbn-resolving.de/urn:nbn:de:0297-zib-50912}, year = {2014}, abstract = {Kurzfassung. Durch die Alkalit{\"a}t des Betons wird Betonstahl dauerhaft vor Korrosion gesch{\"u}tzt. Infolge von Chlorideintrag kann dieser Schutz nicht l{\"a}nger aufrechterhalten werden und f{\"u}hrt zu Lochkorrosion. Die zerst{\"o}rungsfreie Pr{\"u}fung von Stahlbetonproben mit 3D-CT bietet die M{\"o}glichkeit, eine Probe mehrfach gezielt vorzusch{\"a}digen und den Korrosionsfortschritt zu untersuchen. Zur Quantifizierung des Sch{\"a}digungsgrades m{\"u}ssen die bei dieser Untersuchung anfallenden großen Bilddaten mit Bildverarbeitungsmethoden ausgewertet werden. Ein wesentlicher Schritt dabei ist die Segmentierung der Bilddaten, bei der zwischen Korrosionsprodukt (Rost), Betonstahl (BSt), Beton, Rissen, Poren und Umgebung unterschieden werden muss. Diese Segmentierung bildet die Grundlage f{\"u}r statistische Untersuchungen des Sch{\"a}digungsfortschritts. Hierbei sind die {\"A}nderung der BSt-Geometrie, die Zunahme von Korrosionsprodukten und deren Ver{\"a}nderung {\"u}ber die Zeit sowie ihrer r{\"a}umlichen Verteilung in der Probe von Interesse. Aufgrund der Gr{\"o}ße der CT-Bilddaten ist eine manuelle Segmentierung nicht durchf{\"u}hrbar, so dass automatische Verfahren unabdingbar sind. Dabei ist insbesondere die Segmentierung der Korrosionsprodukte in den Bilddaten ein schwieriges Problem. Allein aufgrund der Grauwerte ist eine Zuordnung nahezu unm{\"o}glich, denn die Grauwerte von Beton und Korrosionsprodukt unterscheiden sich kaum. Eine formbasierte Suche ist nicht offensichtlich, da die Korrosionsprodukte in Beton diffuse Formen haben. Allerdings l{\"a}sst sich Vorwissen {\"u}ber die Ausbreitung der Korrosionsprodukte nutzen. Sie bilden sich in r{\"a}umlicher N{\"a}he des BSt (in Bereichen vorheriger Volumenabnahme des BSt), entlang von Rissen sowie in Porenr{\"a}umen, die direkt am BSt und in dessen Nahbereich liegen. Davon ausgehend wird vor der Korrosionsprodukterkennung zun{\"a}chst eine BSt-Volumen-, Riss- und Porenerkennung durchgef{\"u}hrt. Dieser in der Arbeit n{\"a}her beschriebene Schritt erlaubt es, halbautomatisch Startpunkte (Seed Points) f{\"u}r die Korrosionsprodukterkennung zu finden. Weiterhin werden verschiedene in der Bildverarbeitung bekannte Algorithmen auf ihre Eignung untersucht werden.}, language = {de} } @misc{OsterlandBennProhaskaetal.2015, author = {Osterland, Marc and Benn, Andreas and Prohaska, Steffen and Sch{\"u}tte, Christof}, title = {Single Cell Tracking in Phase-Contrast Microscopy}, journal = {EMBL Symposium 2015 - Seeing is Believing - Imaging the Processes of Life}, year = {2015}, abstract = {In this work, we developed an automatic algorithm to analyze cell migration in chemotaxis assays, based on phase-contrast time-lapse microscopy. While manual approaches are still widely used in recent publications, our algorithm is able to track hundreds of single cells per frame. The extracted paths are analysed with traditional geometrical approaches as well as diffusion-driven Markov state models (MSM). Based on these models, a detailed view on spatial and temporal effects is possible. Using our new approach on experimental data, we are able to distinguish between directed migration (e.g. towards a VEGF gradient) and random migration without favored direction. A calculation of the committor probabilities reveals that cells of the whole image area are more likely to migrate directly towards the VEGF than away from it during the first four hours. However, in absence of a chemoattractant, cells migrate more likely to their nearest image border. These conclusions are supported by the spatial mean directions. In a next step, the cell-cell interaction during migration and the migration of cell clusters will be analyzed. Furthermore, we want to observe phenotypical changes during migration based on fluorescence microscopy and machine learning. The algorithm is part of a collaborative platform which brings the experimental expertise of scientists from life sciences and the analytical knowledge of computer scientists together. This platform is built using web-based technologies with a responsive real-time user interface. All data, including raw and metadata as well as the accompanying results, will be stored in a secure and scalable compute cluster. The compute cluster provides sufficient space and computational power for modern image-based experiments and their analyses. Specific versions of data and results can be tagged to keep immutable records for archival.}, language = {en} }