TY - THES A1 - Zachow, Stefan T1 - Computergestützte 3D Osteotomieplanung in der Mund-Kiefer-Gesichtschirurgie unter Berücksichtigung der räumlichen Weichgewebeanordnung T1 - Computer assisted 3D osteotomy planning in cranio-maxillofacial surgery under consideration of facial soft tissue arrangement N2 - In der Arbeit wird die computergestützte Planung von chirurgisch gesetzten Knochenfrakturen bzw. Knochenschnitten (sogenannten Osteotomien) an dreidimensionalen, computergrafischen Schädelmodellen, sowie die Umpositionierung separierter knöcherner Segmente im Kontext der rekonstruktiven MKG-Chirurgie behandelt. Durch die 3D Modellierung und Visualisierung anatomischer Strukturen, sowie der 3D Osteotomie- und Umstellungsplanung unter Einbeziehung der resultierenden Weichgewebedeformation wird den Chirurgen ein Werkzeug an die Hand gegeben, mit dem eine Therapieplanung am Computer durchgeführt und diese in Hinblick auf Funktion und Ästhetik bewertet werden kann. Unterschiedliche Strategien können dabei erprobt und in ihrer Auswirkung erfasst werden. Dazu wird ein methodischer Ansatz vorgestellt, der zum einen die chirurgische Planung im Vergleich zu existierenden Ansätzen deutlich verbessert und zum anderen eine robuste Weichgewebeprognose, durch den Einsatz geeigneter Planungsmodelle und eines physikalisch basierten Weichgewebemodells unter Nutzung numerischer Lösungsverfahren in die Planung integriert. Die Visualisierung der Planungsergebnisse erlaubt sowohl eine anschauliche und überzeugende, präoperative Patientenaufklärung, als auch die Demonstration möglicher Vorgehensweisen und deren Auswirkungen für die chirurgische Ausbildung. Ferner ergänzen die Planungsdaten die Falldokumentation und liefern einen Beitrag zur Qualitätssicherung. Die Arbeit ist in sieben Kapitel gegliedert und wie folgt strukturiert: Zuerst wird die medizinische Aufgabenstellung bei der chirurgischen Rekonstruktion von Knochenfehlbildungen und -fehlstellungen in der kraniofazialen Chirurgie sowie die daraus resultierenden Anforderungen an die Therapieplanung beschrieben. Anschließend folgt ein umfassender Überblick über entsprechende Vorarbeiten zur computergestützten Planung knochenverlagernder Operationen und eine kritische Bestandsaufnahme der noch vorhandenen Defizite. Nach der Vorstellung des eigenen Planungsansatzes wird die Generierung individueller, qualitativ hochwertiger 3D Planungsmodelle aus tomografischen Bilddaten beschrieben, die den Anforderungen an eine intuitive, 3D Planung von Umstellungsosteotomien entsprechen und eine Simulation der daraus resultierenden Weichgewebedeformation mittels der Finite-Elemente Methode (FEM) ermöglichen. Die Methoden der 3D Schnittplanung an computergrafischen Modellen werden analysiert und eine 3D Osteotomieplanung an polygonalen Schädelmodellen entwickelt, die es ermöglicht, intuitiv durch Definition von Schnittlinien am 3D Knochenmodell, eine den chirurgischen Anforderungen entsprechende Schnittplanung unter Berücksichtigung von Risikostrukturen durchzuführen. Separierte Knochensegmente lassen sich im Anschluss interaktiv umpositionieren und die resultierende Gesamtanordnung hinsichtlich einer funktionellen Rehabilitation bewerten. Aufgrund des in dieser Arbeit gewählten, physikalisch basierten Modellierungsansatzes kann unter Berücksichtigung des gesamten Weichgewebevolumens aus der Knochenverlagerung direkt die resultierende Gesichtsform berechnet werden. Dies wird anhand von 13 exemplarischen Fallstudien anschaulich demonstriert, wobei die Prognosequalität mittels postoperativer Fotografien und postoperativer CT-Daten überprüft und belegt wird. Die Arbeit wird mit einem Ausblick auf erweiterte Modellierungsansätze und einem Konzept für eine integrierte, klinisch einsetzbare Planungsumgebung abgeschlossen. N2 - In cranio-maxillofacial surgery, physicians are often faced with skeletal malformations that require complex bone relocations. Especially in severe cases of congenital dysgnathia (misalignment of upper and lower jaw) or hemifacial microsomia (asymmetric bone and tissue development), where multiple bone segments are to be mobilized and relocated simultaneously and in relation to each other, careful preoperative planning is mandatory. At present in clinical routine not all possible strategies can be planned and assessed with regard to functional rehabilitation. Moreover, the aesthetic outcome, i.e. the postoperative facial appearance, can only be estimated by a surgeon's experience and hardly communicated to the patient. On this account, a preoperative planning of complex osteotomies with bone relocations on a computerized model of a patient's head, including a reliable three-dimensional prediction and visualization of the post-surgical facial appearance is a highly appreciated possibility cranio-maxillofacial surgeons are longing for. This work, being performed at Zuse Institute Berlin (ZIB), addresses such a computer based 3D~surgery planning. A processing pipeline has been established and a simulation environment has been developed on basis of the software Amira, enabling a surgeon to perform bone cuts and bone rearrangements in an intuitive manner on virtual patient models. In addition, a prediction of the patients' postoperative appearance according to the relocated bone can be simulated and visualized realistically. For a meaningful planning of surgical procedures, anatomically correct patient models providing all relevant details are reconstructed from tomographic data with high fidelity. These patient models reliably represent bony structures as well as the facial soft tissue. Unstructured volumetric grids of the soft tissue are generated for a fast and efficient numerical solution of partial differential equations, describing tissue deformation on the foundation of 3D elastomechanics. The planning of osteotomies (bone cuts) for the mobilization and relocation of bone segments is performed in accordance to the planning on basis of life size replicas of a patient's skull, i.e. stereolitographic models. Osteotomy lines can be drawn on top of the polygonal planning models using suitable input devices. After evaluation of the consequence of a planned cut with regard to vulnerable inner structures (nerves, teeth etc.) the model is separated accordingly. A relocation of bone segments can be performed unrestrictedly in 3D or restricted to a translation or rotation within arbitrarily chosen planes under consideration of cephalometric guidelines. Bone and tooth collisions can be evaluated for functional analysis or orthodontic treatment planning with possible integration of digitized dental plaster casts. As a result of the preoperative planning, a single transformation matrix, encoding translation and rotation, or a sequence of such matrices are provided for each bone segment. Both the osteotomy paths and the transformation parameters can finally be used for intra-operative navigation. In the course of the planning, the relocated positions of bone segments serve as an input for the simulation of the resulting soft tissue deformation. Since bone and surrounding soft tissue share common boundaries that are either fixed or translocated, the resulting configuration of the entire tissue volume can be computed from the given boundary displacements by numerical minimization of the internal strain energy on basis of a biomechanical model, using a finite-element approach. In collaboration with different surgeons and hospitals more than 25 treatments have been accompanied by preoperative planning so far ranging from mandibular and midfacial hypoplasia to complex hemifacial microsomia. 13 of these cases are presented within this work. Simulation results were validated on the basis of photographs as well as of postoperative CT data, showing a good correlation between simulation and postoperative outcome. Further aspects of improving the modeling approach are discussed. It has been demonstrated that 3D~osteotomy planning on virtual patient models can be performed intuitively, and that 3D~tissue deformation for cranio-maxillofacial osteotomy planning can be predicted numerically without using heuristic ratios. It can be stated that by using 3D~planning software, a surgeon gains a better spatial understanding of complex dysplasia, and the 3D~soft tissue prediction gives an additional criterion for the assessment of the planned strategy. It turned out that, especially in complex cases such as hemifacial microsomia or for decisions bet­ween mono- and bimaxillary advancements, a 3D~planning aid is extremely helpful. The conclusion is, that images and animations created within the planning phase provide a valuable planning criterion for maxillofacial surgeons as well as a demonstrative information for patients and their relatives, thus greatly enhancing patient information, as well as surgical education. All data that result from the planning are also important for documentation and quality assurance. 3D osteotomy planning, including soft tissue prediction, likely will become a new paradigm of plastic and reconstructive surgery planning in the future. An assortment of results can be found under: http://www.zib.de/visual/medical/projects KW - MKG-Chirurgie KW - Mund-Kiefer-Gesichtschirurgie KW - Therapieplanung KW - Osteotomie KW - Weichgewebeprädiktion KW - computer assisted surgery KW - therapy planning KW - osteotomy KW - soft tissue prediction KW - CAS Y1 - 2005 UR - https://opus4.kobv.de/opus4-zib/frontdoor/index/index/docId/1043 UR - https://nbn-resolving.org/urn:nbn:de:0297-zib-10432 SN - 3899631986 ER -