TY - JOUR A1 - Westers, Daniel A1 - Nierhoff, Thomas A1 - Schneider, Andreas ED - Direktorium des Westfälischen Energieinstituts, T1 - Degradationsanalyse von Photovoltaikmodulen – Eine Langzeitstudie an der Westfälischen Hochschule Gelsenkirchen N2 - Photovoltaikmodule unterliegen im Betrieb verschiedenen Degradationsmechanismen, die zu Leistungsverlusten führen. Diese Studie[1] untersucht die tatsächliche Degradation ausgewählter Solarmodule der Photovoltaikanlage an der Westfälischen Hochschule Gelsenkirchen über einen Zeitraum von bis zu 23 Jahren[2]. Ziel ist es, die Langzeitstabilität verschiedener Modultechnologien unter realen Betriebsbedingungen zu evaluieren und Aussagen über die Qualität der Degradation zu treffen. Die Untersuchung umfasst PV-Installationen mit kristallinen Modulen (mono- und polykristallin), Dünnschichtmodulen (amorphes und mikrokristallines Silizium) sowie innovativen Heterojunction-Modulen (Sanyo HIT). Nach Auswertung der Ertragsdaten und Performance Ratio wurden zehn Module aus den einzelnen Anlagen selektiert und im Solarlabor mittels Sonnensimulator unter Standard-Testbedingungen (STC) vermessen. Ergänzende Elektrolumineszenz- und Thermographie-Analysen ermöglichten die Identifikation von Mikrodefekten, Zellrissen und Hot-Spots. Die Ergebnisse bezogen auf die Laborleistungsmessung zeigen Degradationsraten zwischen 0,16% und 0,65% pro Jahr, abhängig von der Modultechnologie. Polykristalline PeakonP-Module weisen durchschnittliche Verluste von 0,53% jährlich auf. Monokristalline Solon Black 230 Module zeigen geringere Degradation (0,37% p.a.), während rückseitenkontaktierte Solon Black 280 Module geringe Werte erreichen (0,16% p.a.). Heterojunction-Module (Sanyo HIT) zeigen eine Degradation von 0,64% p.a. Die Hauptdegradationsursachen sind lichtinduzierte Degradation (LID), potentialinduzierte Degradation (PID), Zellrisse und Delaminationen. Die meisten Module erfüllen oder übertreffen die Herstellergarantien von 90% nach 10 Jahren. [1] Die in diesem Beitrag präsentierten Ergebnisse basieren auf der Bachelorarbeit von Daniel Westers, die im FB 2 (Lehreinheit Elektrotechnik) der Westfälischen Hochschule im Jahr 2021 im Solarlabor unter Betreuung von Prof. Dr. Andreas Schneider durchgeführt wurde. [2] Alle zeitlichen Angaben in dieser Arbeit beziehen sich auf das Jahr der Bearbeitung der Bachelorarbeit. T3 - Schriftenreihe des Westfälischen Energieinstituts - 2 KW - Photovoltaik KW - Degradation KW - Langzeitstudie KW - Performance Ratio KW - Elektrolumineszenz KW - Thermographie KW - LID KW - Solarmodule KW - PID KW - Modulalterung Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1010-opus4-49309 SN - 3053-3007 (eISSN) ER - TY - JOUR A1 - Coester, Ulla A1 - Anderle, Laura A1 - Pohlmann, Norbert T1 - Trustworthiness needs for the use of AI solutions in business BT - Ethical and empirical considerations JF - Interaction Studies N2 - Using AI adequately is necessary for user companies to remain competitive. Studies show that nevertheless many companies are hesitant in this regard. In relation to the assumption that people’s ability to act is influenced by a lack of trust, particularly in the context of AI, we conducted a study as part of the TrustKI research project to analyze which factors are relevant to documenting trustworthiness in the context of AI. Our evaluation revealed that users demand holistic transparency; the provision of relevant information on the AI solution and proof of technical expertise is not sufficient to build trust, but there is a demand from users for specific information about the respective company. Based on the generally recognized components, we were able to identify further dimensions to provide the required information even more precisely. Thus, the study allows us to propose a preliminary set of information requirements for AI providers. KW - AI ethics; artificial intelligence; business alignment; holistic transparency; transparency; trustworthiness Y1 - 2025 U6 - https://doi.org/10.1075/is.24051.coe SN - 1572-0373 (Print) SN - 1572-0381 (eISSN) VL - December 2025 IS - Volume 26, Issue 2 SP - 298 EP - 325 PB - John Benjamins Publishing Company ER - TY - JOUR A1 - Thiem, Verena Katharina A1 - Kiessling, Claudia A1 - Sülzenbrück, Sandra T1 - Zugehörigkeit und mentale Gesundheit im Studium: Eine qualitative Studie zu Studierenden mit Migrationshintergrund JF - Prävention und Gesundheitsförderung N2 - Hintergrund Studierende mit Migrationshintergrund berichten häufiger über ein geringeres Zugehörigkeitsgefühl („sense of belonging“), verbunden mit höherem Stress und erhöhter Abbruchneigung. Trotz dieser Relevanz liegen im deutschsprachigen Raum bislang kaum qualitative Untersuchungen zu diesem Thema vor. Ziel der Studie war es, das subjektive Zugehörigkeitserleben von Studierenden mit Migrationshintergrund zu rekonstruieren und dessen Bedeutung für die mentale Gesundheit zu analysieren. Methodik Die Untersuchung folgte einem qualitativ-explorativen, Community-basierten Design. An einer Hochschule für angewandte Wissenschaften im Ruhrgebiet wurden 28 Peer-Interviews mit Studierenden mit Migrationshintergrund geführt. Die Auswertung erfolgte mittels strukturierender qualitativer Inhaltsanalyse nach Kuckartz, theoretisch gerahmt durch die Social-identity-Theorie (Social-cure-Ansatz), den „Social Determinants of Health“-Ansatz und das „Study Demands-Resources“-Modell. Ergebnisse Zugehörigkeit erwies sich als zentrale Ressource für psychische Gesundheit. Fehlende Zugehörigkeit war mit emotionaler Erschöpfung, Demotivation und psychosomatischen Symptomen assoziiert, während erlebte Zugehörigkeit als Puffer- und Aktivierungsfaktor wirkte. Hochschulische Kommunikationskultur, soziale Dynamiken unter Studierenden sowie strukturelle Ungleichheiten beeinflussten das Zugehörigkeitserleben maßgeblich. Schlussfolgerung Zugehörigkeit stellt eine sozial und institutionell gestaltbare Gesundheitsdeterminante dar. Maßnahmen der Gesundheitsförderung sollten strukturelle, soziale und organisationale Bedingungen in den Blick nehmen, die Zugehörigkeit stärken, etwa durch transparente Regeln, wertschätzende Kommunikation und inklusive Lernumgebungen. KW - Soziale Zugehörigkeit KW - Studierende mit Migrationshintergrund KW - Community Health Forschung KW - Studierendengesundheit KW - Hochschulische Gesundheitsförderung KW - Social sense of belonging KW - Students with migration background KW - Community health research KW - Higher education health KW - Health promotion in higher education Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1010-opus4-49170 VL - 2026 IS - 1 PB - Springer ER - TY - JOUR A1 - Vieregge, Jaqueline A1 - Sutter, Christine A1 - Sülzenbrück, Sandra T1 - Steigerung der Arbeitszufriedenheit durch die Berücksichtigung von Hochsensibilität in modernen Arbeitsumgebungen JF - Wirtschaftspsychologie. Gesundheit in der Arbeitswelt N2 - Sensory Processing Sensitivity (SPS; Hochsensibilität) ist durch eine erhöhte Empfindlichkeit gegenüber Umweltreizen – sowohl positiven als auch negativen Reizen – gekennzeichnet. Aktuelle Studien identifizieren zwei Facetten des Konstrukts: Vantage-Sensitivität (repräsentiert durch ästhetische Sensitivität) und Vulnerable-Sensitivität (bestehend aus niedriger sensorischer Schwelle und leichter Erregbarkeit) (Pluess & Belsky, 2013; Wyrsch, 2020). Seit der wegweisenden Studie von Aron und Aron (1997) konzentrierte sich der Großteil der empirischen Forschung auf die allgemeinen Merkmale von Hochsensibilität, insbesondere auf die negativen Konsequenzen (Greven et al., 2019). Nur wenige Studien untersuchten die Hochsensibilität im organisatorischen Kontext und berücksichtigten dabei auch die positiven Effekte von Hochsensibilität. Basierend auf dem Job-Characteristics-Modell von Hackman und Oldham (1976) schließen wir diese Forschungslücke, indem wir moderierende Effekte der Hochsensibilität auf die Zusammenhänge zwischen den Arbeitsmerkmalen Autonomie und Aufgabenvielfalt auf die Arbeitszufriedenheit als organisationale Outcome-Variable untersuchen. Wir nehmen positive Korrelationen zwischen Arbeitsmerkmalen und der Arbeitszufriedenheit sowie einen positiven moderierenden Effekt von Hochsensibilität auf diesen Zusammenhang an. Die Ergebnisse unserer Studie (N = 719) bestätigen, dass die Hochsensibilität die Beziehung zwischen Autonomie und Arbeitszufriedenheit positiv moderiert. Gleichzeitig fanden wir jedoch auch negative Zusammenhänge zwischen vulnerabler Sensitivität und Arbeitszufriedenheit. Hinsichtlich der Aufgabenvielfalt konnten moderierende Effekte ausschließlich für die Vantage-Sensitivität festgestellt werden. Die Ergebnisse verdeutlichen, dass sich die Zufriedenheit der Mitarbeitenden und gleichzeitig die Performance des Unternehmens verbessert werden können,n wenn moderne Arbeitsumgebungen Persönlichkeitseigenschaften wie Hochsensibilität im Arbeitsumfeld berücksichtigen. N2 - Sensory processing sensitivity (SPS) is characterized by a higher sensitivity to environmental stimuli, both positive and negative. Recent studies have shown two construct facets of SPS, vantage sensitivity (represented by aesthetic sensitivity) and vulnerable sensitivity (which consists of low sensory threshold and ease of excitation) (Pluess & Belsky, 2013), Wyrsch, 2020). Since the seminal publication by Aron and Aron (1997), most empirical studies focused on SPS characteristics in general and especially on the negative consequences of SPS (Greven et al., 2019). However, only a few studies focused on SPS in the organizational context and also targeted the positive effects of SPS. Based on the Job Characteristic model by Hackman and Oldham (1976), we addressed this research gap by investigating the moderating effects of SPS on associations between the job characteristics autonomy and task variety and job satisfaction as an organizational outcome variable. We assumed a positive correlation between job characteristics and job satisfaction and a positive moderating effect of SPS. The survey study results (N = 719) confirm that SPS positively moderates the relationship between autonomy and job satisfaction. However, we also found negative relationships between vulnerable sensitivity and job satisfaction. Regarding task variety, we only found moderating effects for vantage sensitivity. Our findings demonstrate that employees' satisfaction and organizational outcomes could be optimized if modern working environments consider personality traits such as the level of SPS within the workplace. T2 - Increasing job satisfaction by considering sensory processing sensitivity in modern working environments KW - Arbeitszufriedenheit KW - Hochsensibilität KW - moderne Arbeitsumgebungen KW - Arbeitsmerkmale KW - Umweltsensitivität KW - job satisfaction KW - sensory processing sensitivity KW - modern working environments KW - job characteristics KW - Environmental Sensitivity Y1 - 2026 U6 - https://doi.org/10.2440/004-0069 VL - 2025-3 IS - 27 SP - 306 EP - 321 PB - Pabst Science Publishers CY - Lengerich ER - TY - JOUR A1 - Ganser, Alina A1 - Rühmkorf, Andreas T1 - ESG in Germany: From the European Green Deal to the Supply Chain Due Diligence Act JF - Amicus curiae : the journal of the Society for Advanced Legal Studies, Series 2 N2 - This article discusses the trend towards environmental, social and governance (ESG)-related laws in Germany in the context of Germany’s membership of the European Union (EU). As an EU member state, Germany is subject to a wave of recent directives and regulations that the EU passed as part of its so-called “European Green Deal”. However, Germany also has its own tradition of promoting the goal of sustainability in the law, including company law. The article first distinguishes relevant terminology as some regulations refer to ESG, whereas others to “sustainability”. It then traces the historic development of such laws in German law, including the traditional debate about the interest of the company in German law. This discussion is followed by a case study that critically examines the German Supply Chain Due Diligence Act of 2021 that continues to be subject to heated political discussions. The article demonstrates how ESG has, in recent years, become a compliance issue in Germany that is now a matter of consideration for boards. KW - sustainability KW - supply chain KW - LkSG KW - company law KW - implementation KW - Germany KW - corporate governance KW - compliance KW - human rights KW - ESG Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1010-opus4-49184 SN - 2048-481X VL - 6 IS - 3 SP - 695 EP - 718 ER - TY - JOUR A1 - Brand, Marco A1 - Utu, Ion-Dragos A1 - Sirbu, Nicusor-Alin A1 - Perianu, Ion-Aurel A1 - Predu, Denis Andrei A1 - Marginean, Gabriela T1 - Microstructural Characteristics of Graded Ni-Fe Coatings Fabricated Through DED-L JF - Materials (Special Issue Advanced Coating Research for Metal Surface Protection) N2 - Directed Energy Deposition-Laser (DED-L) enables high-performance coatings through melting and successive powder deposition. Its compositional flexibility suits functionally graded layers that enhance corrosion and wear resistance. This study aimed to improve parameters for producing dense, defect-free, graded Ni- and Fe-based coatings by varying the scanning speed and deposition strategy (monodirectional versus bidirectional, with/without layer rotation), while keeping the power and hatch distance constant. Laser and electron microscopy were used to link parameters to porosity and uniformity. Optimal settings minimized pores, improved interlayer bonding and preserved geometry; inadequate parameters yielded porous, irregular deposits. A bidirectional path with 90° rotation appeared best. Ongoing research activities are needed to assess its properties. Highlights What are the main findings? - Bidirectional samples show fewer pores than samples with monodirectional movement. - Increasing the scanning speed leads to lower porosity (bidirectional scanning mode with 90° layer rotation). - Bidirectional deposition with 90° layer rotation exhibits best quality What are the implications of the main findings? - Systematic study of scanning speed and deposition strategy. - Practical guidance for process improvement of graded metal coatings; properties under evaluation. - Functionally graded Ni-Fe coatings fabricated by DED-L with tailored microstructures. KW - parameter study KW - directed energy deposition-laser KW - functionally graded materials KW - deposition strategy KW - powder processing KW - surface protection Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1010-opus4-49138 SN - 1996-1944 VL - 2026 IS - 19 (2) PB - MDPI ER - TY - JOUR A1 - Rout, Surya Snata A1 - Kentsch, Ulrich A1 - Dohmen, Ralf A1 - Traeger, Franziska A1 - Das, Swarna Prava A1 - Becker, Hans-Werner A1 - Facsko, Stefan A1 - Ritter, Martin ED - American Astronomical Society, T1 - High-temperature He+ Irradiation of Low-iron-bearing Olivine: Laboratory Simulations of Space Weathering on Mercury JF - The Planetary Science Journal N2 - The surface of Mercury is highly space weathered, and the products of space weathering are different than on the Moon. Here we simulate the interaction of solar wind ions with the surface of Mercury by implanting low-iron-bearing (∼3 wt% Fe) olivine slices with 4 keV He+ ions both under ambient conditions and at 450 °C during the irradiation. The sample irradiated under ambient conditions shows a ∼140 nm thick partially amorphous layer on top of the grain with high concentrations of bubbles and cavities. However, the sample irradiated at 450 °C has a 110–140 nm thick polycrystalline layer with 1–5 nm sized nanoparticles of metallic iron and no bubbles or cavities. Mg atoms are preferentially sputtered from the ion-damaged layer present on the sample irradiated under ambient conditions, but no difference in composition is seen between the crystalline olivine and the ion-damaged layer in the sample irradiated at 450 °C. In addition, a thin amorphous film deposited on a micro-electromechanical systems–based chip is heated up to 1200 °C in situ inside a transmission electron microscope for a few milliseconds, and it produced nanoparticles of size 5–30 nm. Our results show that solar wind irradiation of low-iron-bearing olivine in the equatorial regions of Mercury will produce nanoparticles of iron whose sizes will be larger than that on the surface of the Moon and that the size will further increase during impacts of dust particles. Solar-wind-implanted He can diffuse out of regolith grains and can be a source of He observed in the exosphere of Mercury. KW - Mercury (planet) KW - Solar wind KW - Planetary surfaces Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1010-opus4-49120 SN - 2632-3338 VL - 2025 IS - Volume 6, Number 11 PB - IOP Publishing ER - TY - JOUR A1 - Bergmans, Bernhard ED - Bergmans, Bernhard ED - Marquardt, Ralf-Michael T1 - Merkmale und Einflussfaktoren des Studienerfolgs in wirtschaftsjuristischen Bachelor-Studiengängen. Eine empirische Untersuchung JF - ReWir - Recklinghäuser Beiträge zu Recht und Wirtschaft N2 - Der Aufsatz untersucht anhand empirischer Daten zu ca. 400 Studierenden wirtschaftsjuristischer Bachelor-Studiengänge an der Westfälischen Hochschule eine Reihe etablierter und neuer Indikatoren für den Studienerfolg. Insbesondere schulnotenbezogene Prädiktoren erweisen sich dabei als nur noch bedingt aussagefähig, andere bekannte (insbes. Motivationslevel) und neue (insbes. Berufsausbildung vor dem Studium) erweisen sich als verlässliche, wenn auch nicht starke Prädiktoren. T3 - ReWir. Recklinghäuser Beiträge zu Recht und Wirtschaft - 70/2025 KW - Studienerfolg KW - Wirtschaftsrecht KW - Bachelor KW - Schulabschlussnote KW - Westfälische Hochschule Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1010-opus4-49114 SN - 2191-866X VL - 2025 IS - 70 PB - Logos Verlag CY - Berlin ER - TY - JOUR A1 - Otterpohl, Florian A1 - Nalbach, Peter A1 - Paladino, Elisabetta A1 - Falci, Giuseppe A. A1 - Thorwart, Michael T1 - Quantum 1/f^η noise induced relaxation in the spin-boson model JF - Physical Review Research N2 - We extend the spin-boson model of open quantum systems to the regime of quantum 1/𝑓^𝜂 noise characterized by negative exponents of its spectral distribution. Using the numerically exact time-evolving matrix product operator, we find the dynamic regime diagram, including pseudocoherent dynamics controlled by quantum 1/𝑓^𝜂 noise. We determine the dephasing rate and find for it an empirical formula valid at zero temperature. The bath reorganization energy depends on the infrared bath cutoff frequency, revealing an increased sensitivity of the dephasing on the measurement time of an experiment. Our results apply to a qubit as an elementary building block of a quantum computer and pave the way toward a quantum treatment of low-frequency noise in more complex architectures. KW - Quantum noise KW - Spin-boson model KW - Dynamical phase transitions KW - Open quantum systems & decoherence KW - Qubits KW - Non-Markovian processes KW - Tensor network methods Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1010-opus4-49035 SN - 2643-1564 VL - 2025 IS - 7 PB - American Physical Society ER - TY - JOUR A1 - Pattyn, Cedric A1 - Sciacqua, Dario A1 - Kwiedor, Lukas A1 - Jagodar, Andrea A1 - Strunskus, Thomas A1 - Traeger, Franziska A1 - Lecas, Thomas A1 - Kovacevic, Eva A1 - Berndt, Johannes T1 - Controlled deposition of plasma-polyaniline thin film by PECVD: Understanding the influence of aniline to argon ratio JF - Plasma Processes and Polymers N2 - Low pressure capacitively coupled radiofrequency plasmas operated in a mixture of aniline vapor and argon are used for the deposition of thin films on silicon substrates. The influence of the aniline vapor fraction in the gas mixture upon the plasma properties and the characteristics of the deposited thin film is analyzed. Plasmas diagnostics are carried out using mass spectrometry and optical emission spectroscopy and the thin films are characterized by means of Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine-structure spectroscopy. Experiments highlight that the use of a low aniline/argon ratio leads to the deposition of an amorphous film whereas high-aniline/argon ratios allow the synthesis of a plasma polymer similar to polyaniline. The properties of such plasmas and the mechanisms involved in the deposition process are discussed in detail. KW - mass spectrometry KW - NEXAFS KW - plasma KW - polyaniline KW - polymerization KW - XPS Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1010-opus4-49095 SN - 1612-8869 VL - 2022 IS - Volume 19, Issue 5 PB - Wiley-VCH ER -