@article{BrandGosslingUtuetal.2026, author = {Brand, Marco and Goßling, Mareen and Utu, Ion-Dragos and Marginean, Gabriela}, title = {Comparative Performance of Ni- and Fe-Based Mixed Alloy Brazed Coatings via Laser Remelting}, series = {Lubricants (Special Issue Analysis, Evaluation and Diagnosis of Tribological Phenomena in Machining Processes)}, volume = {2026}, journal = {Lubricants (Special Issue Analysis, Evaluation and Diagnosis of Tribological Phenomena in Machining Processes)}, number = {14 (4)}, publisher = {MDPI}, doi = {10.3390/lubricants14040142}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49343}, pages = {19}, year = {2026}, abstract = {Traditionally, repairing coated substrates requires completely removing damaged, wear-resistant layers before recoating. This process leads to high costs, extended downtime, and material waste. Flexible brazing tapes, which are composed of alloy powder and an organic binder, offer an alternative to full coating removal for targeted repairs. Despite this, the process of vacuum brazing these tapes may lead to the formation of defects, including pores caused by trapped gases or residual binder, which compromise coating durability and corrosion resistance. This study focuses on the utilization of laser remelting as a method for post-processing nickel- and iron-based mixed alloy brazing tapes, with the aim of improving the integrity of the coating. Surface quality was assessed via microscopy and microhardness testing by systematically varying laser power, scanning speed, and hatch distance. Among the parameters studied, the most suitable laser parameter combination was found to be 350 W laser power, 250 mm/s scanning speed, and a hatch distance of 0.02 mm. These parameters yielded crack- and pore-free coatings with a remelting depth of 160.3 ± 17.2 µm and a microhardness of 701 ± 23 HV1, which is an 85\% increase over as-brazed samples. Wear testing revealed a reduced coefficient of friction, and electrochemical corrosion tests showed lower corrosion current density and enhanced repassivation behavior in remelted coatings. These improvements demonstrate that laser remelting significantly enhances the microstructure, hardness, wear resistance, and corrosion performance of brazed coatings, providing an effective method for localized repair while minimizing material consumption and processing duration.}, language = {en} } @book{SchoeffnerSenne2026, author = {Sch{\"o}ffner, G{\"u}nther and Senne, Petra}, title = {Professionelle Zusammenarbeit von Gesch{\"a}ftsf{\"u}hrung und Betriebsrat. Ein Praxisleitfaden f{\"u}r F{\"u}hrungskr{\"a}fte und Manager}, edition = {2., neu bearbeitete Auflage}, publisher = {Erich Schmidt Verlag}, address = {Berlin}, isbn = {978-3-503-24346-4}, publisher = {Westf{\"a}lische Hochschule Gelsenkirchen Bocholt Recklinghausen}, pages = {295}, year = {2026}, abstract = {F{\"u}r Gesch{\"a}ftsf{\"u}hrung und Management ist die Zusammenarbeit mit dem Betriebsrat h{\"a}ufig anspruchsvoll. Wer als F{\"u}hrungskraft souver{\"a}n handeln und sichere Entscheidungen treffen will, braucht ein klares Verst{\"a}ndnis des gesetzlichen Rahmens und der praktischen Spielregeln der Mitbestimmung. Das Werk zeigt, wie langfristig eine vertrauensvolle und tragf{\"a}hige Kooperation zwischen den Betriebsparteien gelingt. Anhand zahlreicher Praxisbeispiele erf{\"a}hrt der Leser sowohl aus Management- als auch juristischer Sicht, wie • gesetzliche Anforderungen insbesondere auf Grundlage des BetrVG und der aktuellen Rechtsprechung rechtssicher erf{\"u}llt werden, • typische Verhaltens- und Reaktionsmuster von Managern und Betriebsr{\"a}ten einzuordnen sind sowie Machtmissbrauch und Fehlentwicklungen fr{\"u}hzeitig entgegengewirkt werden kann, • h{\"a}ufige Konfliktfelder und Anliegen verbindlich gekl{\"a}rt werden, etwa zu Fortbildungsanspr{\"u}chen, Arbeitsbedingungen oder Vertragsfragen. Die 2. Auflage greift aktuelle gesellschaftliche und wirtschaftliche Entwicklungen auf - von neuen Erwartungen der Generation Z {\"u}ber die Auswirkungen von KI bis hin zu hybriden Arbeitsmodellen in einer zunehmend krisengepr{\"a}gten Arbeitswelt.}, language = {de} } @article{WestersNierhoffSchneider2026, author = {Westers, Daniel and Nierhoff, Thomas and Schneider, Andreas}, title = {Degradationsanalyse von Photovoltaikmodulen - Eine Langzeitstudie an der Westf{\"a}lischen Hochschule Gelsenkirchen}, editor = {Direktorium des Westf{\"a}lischen Energieinstituts,}, issn = {3053-3007 (eISSN)}, doi = {10.82307/srwei.vi2}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49309}, pages = {36}, year = {2026}, abstract = {Photovoltaikmodule unterliegen im Betrieb verschiedenen Degradationsmechanismen, die zu Leistungsverlusten f{\"u}hren. Diese Studie[1] untersucht die tats{\"a}chliche Degradation ausgew{\"a}hlter Solarmodule der Photovoltaikanlage an der Westf{\"a}lischen Hochschule Gelsenkirchen {\"u}ber einen Zeitraum von bis zu 23 Jahren[2]. Ziel ist es, die Langzeitstabilit{\"a}t verschiedener Modultechnologien unter realen Betriebsbedingungen zu evaluieren und Aussagen {\"u}ber die Qualit{\"a}t der Degradation zu treffen. Die Untersuchung umfasst PV-Installationen mit kristallinen Modulen (mono- und polykristallin), D{\"u}nnschichtmodulen (amorphes und mikrokristallines Silizium) sowie innovativen Heterojunction-Modulen (Sanyo HIT). Nach Auswertung der Ertragsdaten und Performance Ratio wurden zehn Module aus den einzelnen Anlagen selektiert und im Solarlabor mittels Sonnensimulator unter Standard-Testbedingungen (STC) vermessen. Erg{\"a}nzende Elektrolumineszenz- und Thermographie-Analysen erm{\"o}glichten die Identifikation von Mikrodefekten, Zellrissen und Hot-Spots. Die Ergebnisse bezogen auf die Laborleistungsmessung zeigen Degradationsraten zwischen 0,16\% und 0,65\% pro Jahr, abh{\"a}ngig von der Modultechnologie. Polykristalline PeakonP-Module weisen durchschnittliche Verluste von 0,53\% j{\"a}hrlich auf. Monokristalline Solon Black 230 Module zeigen geringere Degradation (0,37\% p.a.), w{\"a}hrend r{\"u}ckseitenkontaktierte Solon Black 280 Module geringe Werte erreichen (0,16\% p.a.). Heterojunction-Module (Sanyo HIT) zeigen eine Degradation von 0,64\% p.a. Die Hauptdegradationsursachen sind lichtinduzierte Degradation (LID), potentialinduzierte Degradation (PID), Zellrisse und Delaminationen. Die meisten Module erf{\"u}llen oder {\"u}bertreffen die Herstellergarantien von 90\% nach 10 Jahren. [1] Die in diesem Beitrag pr{\"a}sentierten Ergebnisse basieren auf der Bachelorarbeit von Daniel Westers, die im FB 2 (Lehreinheit Elektrotechnik) der Westf{\"a}lischen Hochschule im Jahr 2021 im Solarlabor unter Betreuung von Prof. Dr. Andreas Schneider durchgef{\"u}hrt wurde. [2] Alle zeitlichen Angaben in dieser Arbeit beziehen sich auf das Jahr der Bearbeitung der Bachelorarbeit.}, language = {de} } @article{CoesterAnderlePohlmann2025, author = {Coester, Ulla and Anderle, Laura and Pohlmann, Norbert}, title = {Trustworthiness needs for the use of AI solutions in business}, series = {Interaction Studies}, volume = {December 2025}, journal = {Interaction Studies}, number = {Volume 26, Issue 2}, publisher = {John Benjamins Publishing Company}, issn = {1572-0373 (Print)}, doi = {10.1075/is.24051.coe}, pages = {298 -- 325}, year = {2025}, abstract = {Using AI adequately is necessary for user companies to remain competitive. Studies show that nevertheless many companies are hesitant in this regard. In relation to the assumption that people's ability to act is influenced by a lack of trust, particularly in the context of AI, we conducted a study as part of the TrustKI research project to analyze which factors are relevant to documenting trustworthiness in the context of AI. Our evaluation revealed that users demand holistic transparency; the provision of relevant information on the AI solution and proof of technical expertise is not sufficient to build trust, but there is a demand from users for specific information about the respective company. Based on the generally recognized components, we were able to identify further dimensions to provide the required information even more precisely. Thus, the study allows us to propose a preliminary set of information requirements for AI providers.}, language = {en} } @inproceedings{BuettnerSoehngenPrilla2025, author = {B{\"u}ttner, Sebastian Thomas and S{\"o}hngen, Yannic and Prilla, Michael}, title = {Anthropomorphization of Robots - A Result of Robot Design or a Result of the Human Tendency to Anthropomorphize?}, series = {2025 34th IEEE International Conference on Robot and Human Interactive Communication (RO-MAN). 25-29 August 2025 in Eindhoven, Netherlands}, booktitle = {2025 34th IEEE International Conference on Robot and Human Interactive Communication (RO-MAN). 25-29 August 2025 in Eindhoven, Netherlands}, publisher = {IEEE}, isbn = {979-8-3315-8771-0 (E-Book)}, issn = {1944-9437 (eISSN)}, doi = {10.1109/RO-MAN63969.2025.11217660}, pages = {8}, year = {2025}, abstract = {Anthropomorphism and trust are two variables that are measured in a multitude of HRI studies. These two variables are often treated as dependent variables influenced by a particular robot design or behavior. However, psychological literature suggests that people have individual tendencies to anthropomorphize, influencing these two variables. We ran an experiment in which 70 participants were confronted with two robots, a humanoid and a non-humanoid robot. Before exposing them to the robots, they were screened for their individual tendency to anthropomorphize. After exposure, they rated the robots in terms of anthropomorphism and trust. With this experiment, we show that the individual tendency to anthropomorphize has a clear impact on measuring anthropomorphism and trust with frequently used questionnaires. Given our results, we emphasize that future studies should screen participants for their tendency to anthropomorphize to avoid unwanted biases.}, language = {en} } @inproceedings{OPUS4-4923, title = {Wirtschaft, Psychologie und Nachhaltigkeit}, series = {29. Fachtagung der Gesellschaft f{\"u}r Angewandte Wirtschaftspsychologie. 26.-28.02.2026, Gelsenkirchen}, booktitle = {29. Fachtagung der Gesellschaft f{\"u}r Angewandte Wirtschaftspsychologie. 26.-28.02.2026, Gelsenkirchen}, editor = {Externbrink, Kai and S{\"u}lzenbr{\"u}ck, Sandra and Rennen, Annelie}, publisher = {Pabst Science Publishers}, address = {Lengerich}, isbn = {978-3-69217-026-8}, pages = {94}, year = {2026}, abstract = {Wirtschaft, Psychologie und Nachhaltigkeit sind heute enger miteinander verbunden denn je. Die 29. Fachtagung der Gesellschaft f{\"u}r angewandte Wirtschaftspsychologie widmet sich diesem Zusammenspiel und r{\"u}ckt die Frage in den Mittelpunkt, wie {\"o}kologische, {\"o}konomische und soziale Transformation so gestaltet werden kann, dass sie von Menschen verstanden, mitgetragen und aktiv mitgestaltet wird. Die Tagung an der Westf{\"a}lischen Hochschule in Gelsenkirchen bringt Studierende, Wissenschaftler*innen und F{\"u}hrungskr{\"a}fte aus der Praxis an einem Ort zusammen, an dem die Erfahrung von Strukturwandel und Fragen der Zukunftsf{\"a}higkeit seit Jahrzehnten zum Alltag geh{\"o}ren. Vor diesem Hintergrund bietet die GWPs ein Forum, in dem wissenschaftlich fundierte und empirisch belastbare Erkenntnisse mit praxisnahen Gestaltungsans{\"a}tzen verbunden werden. Sie steht f{\"u}r angewandte Forschung mit Anspruch an Rigor und Relevanz. Die in diesem Band versammelten Beitr{\"a}ge machen deutlich, wie vielf{\"a}ltig und zugleich unmittelbar relevant wirtschaftspsychologische Perspektiven f{\"u}r die Nachhaltigkeitstransformation sind. Sie widmen sich Fragen der Arbeitswelt, Gesundheit und Motivation ebenso wie demokratischen Einstellungen und gesellschaftlicher Teilhabe. Sie beleuchten Akzeptanzprozesse in Mobilit{\"a}t, Technologie und K{\"u}nstlicher Intelligenz, diskutieren Konsumentenverhalten, soziale Verantwortung, Bildungs- und Hochschulentwicklung sowie organisationale Ver{\"a}nderungen. Damit zeigen sie eindr{\"u}cklich, dass nachhaltige Transformation nicht allein eine technische, politische oder wirtschaftliche Aufgabe ist, sondern in besonderem Maße eine psychologische. Wir verstehen diese Tagung daher als Einladung zum Dialog: zwischen Disziplinen, zwischen Forschung und Praxis sowie zwischen den unterschiedlichen Handlungsfeldern, in denen Nachhaltigkeit konkret wird und den Akteur*innen, die sie gestalten. Unser Ziel ist es, Orientierungswissen bereitzustellen, konstruktive Perspektiven zu er{\"o}ffnen und Impulse zu geben, wie wirtschaftspsychologische Erkenntnisse dazu beitragen k{\"o}nnen, nachhaltige Entwicklungen wirksam, akzeptiert und menschlich zu gestalten. Wir danken allen Autor*innen f{\"u}r ihre engagierten Beitr{\"a}ge sowie allen Beteiligten, die durch Organisation, Diskussion und Mitwirkung zum Gelingen dieser Tagung beitragen. Wir w{\"u}nschen Ihnen eine inspirierende Lekt{\"u}re, erkenntnisreiche Diskussionen und viele Impulse f{\"u}r Forschung, Praxis und Lehre.}, language = {mul} } @book{Fieberg2026, author = {Fieberg, Christian}, title = {BIM-Datenmanagement in Theorie und Praxis}, series = {BIM Basics}, journal = {BIM Basics}, edition = {2. {\"u}berarbeitete Auflage}, publisher = {bSD Verlag}, address = {Berlin}, isbn = {978-3-910476-51-6}, publisher = {Westf{\"a}lische Hochschule Gelsenkirchen Bocholt Recklinghausen}, pages = {122}, year = {2026}, abstract = {Die BIM-Methode basiert auf dem Austausch von Modellen und Objektdaten. Diese entwickeln sich im Laufe des Bauprojektes weiter und dienen vielen Beteiligten als Grundlage f{\"u}r die eigenen Aufgaben. Daher ist ein eindeutiges und verl{\"a}ssliches Datenmanagement die Basis f{\"u}r eine gelungene Zusammenarbeit. Die dabei erzeugten Daten gehen mittlerweile weit {\"u}ber 3D-Modelle hinaus. Welche Daten, in welcher Detailtiefe zu welchem Zeitpunkt und in welchem Format vorliegen sollen, ist Gegenstand dieses Buches. Die Modelle und Objektattribute werden vorgestellt und, wo es n{\"o}tig ist, vertiefend beschrieben. Das dazugeh{\"o}rige Datenmanagement wird anschaulich erkl{\"a}rt. Abgerundet wird das Buch mit Tipps zur richtigen Softwareauswahl und einem Quiz zum Test des eigenen Wissenstand. Die zweite Auflage greift dabei aktuelle Entwicklungen (z. B. IFC4.3 und LOIN) auf und erl{\"a}utert neue Anforderungen und Inhalte der BIM-Objekte.}, language = {de} } @article{ThiemKiesslingSuelzenbrueck2025, author = {Thiem, Verena Katharina and Kiessling, Claudia and S{\"u}lzenbr{\"u}ck, Sandra}, title = {Zugeh{\"o}rigkeit und mentale Gesundheit im Studium: Eine qualitative Studie zu Studierenden mit Migrationshintergrund}, series = {Pr{\"a}vention und Gesundheitsf{\"o}rderung}, volume = {2026}, journal = {Pr{\"a}vention und Gesundheitsf{\"o}rderung}, number = {1}, publisher = {Springer}, doi = {10.1007/s11553-026-01294-z}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49170}, pages = {6}, year = {2025}, abstract = {Hintergrund Studierende mit Migrationshintergrund berichten h{\"a}ufiger {\"u}ber ein geringeres Zugeh{\"o}rigkeitsgef{\"u}hl („sense of belonging"), verbunden mit h{\"o}herem Stress und erh{\"o}hter Abbruchneigung. Trotz dieser Relevanz liegen im deutschsprachigen Raum bislang kaum qualitative Untersuchungen zu diesem Thema vor. Ziel der Studie war es, das subjektive Zugeh{\"o}rigkeitserleben von Studierenden mit Migrationshintergrund zu rekonstruieren und dessen Bedeutung f{\"u}r die mentale Gesundheit zu analysieren. Methodik Die Untersuchung folgte einem qualitativ-explorativen, Community-basierten Design. An einer Hochschule f{\"u}r angewandte Wissenschaften im Ruhrgebiet wurden 28 Peer-Interviews mit Studierenden mit Migrationshintergrund gef{\"u}hrt. Die Auswertung erfolgte mittels strukturierender qualitativer Inhaltsanalyse nach Kuckartz, theoretisch gerahmt durch die Social-identity-Theorie (Social-cure-Ansatz), den „Social Determinants of Health"-Ansatz und das „Study Demands-Resources"-Modell. Ergebnisse Zugeh{\"o}rigkeit erwies sich als zentrale Ressource f{\"u}r psychische Gesundheit. Fehlende Zugeh{\"o}rigkeit war mit emotionaler Ersch{\"o}pfung, Demotivation und psychosomatischen Symptomen assoziiert, w{\"a}hrend erlebte Zugeh{\"o}rigkeit als Puffer- und Aktivierungsfaktor wirkte. Hochschulische Kommunikationskultur, soziale Dynamiken unter Studierenden sowie strukturelle Ungleichheiten beeinflussten das Zugeh{\"o}rigkeitserleben maßgeblich. Schlussfolgerung Zugeh{\"o}rigkeit stellt eine sozial und institutionell gestaltbare Gesundheitsdeterminante dar. Maßnahmen der Gesundheitsf{\"o}rderung sollten strukturelle, soziale und organisationale Bedingungen in den Blick nehmen, die Zugeh{\"o}rigkeit st{\"a}rken, etwa durch transparente Regeln, wertsch{\"a}tzende Kommunikation und inklusive Lernumgebungen.}, language = {de} } @article{ViereggeSutterSuelzenbrueck, author = {Vieregge, Jaqueline and Sutter, Christine and S{\"u}lzenbr{\"u}ck, Sandra}, title = {Steigerung der Arbeitszufriedenheit durch die Ber{\"u}cksichtigung von Hochsensibilit{\"a}t in modernen Arbeitsumgebungen}, series = {Wirtschaftspsychologie. Gesundheit in der Arbeitswelt}, volume = {2025-3}, journal = {Wirtschaftspsychologie. Gesundheit in der Arbeitswelt}, number = {27}, publisher = {Pabst Science Publishers}, address = {Lengerich}, doi = {10.2440/004-0069}, pages = {306 -- 321}, abstract = {Sensory Processing Sensitivity (SPS; Hochsensibilit{\"a}t) ist durch eine erh{\"o}hte Empfindlichkeit gegen{\"u}ber Umweltreizen - sowohl positiven als auch negativen Reizen - gekennzeichnet. Aktuelle Studien identifizieren zwei Facetten des Konstrukts: Vantage-Sensitivit{\"a}t (repr{\"a}sentiert durch {\"a}sthetische Sensitivit{\"a}t) und Vulnerable-Sensitivit{\"a}t (bestehend aus niedriger sensorischer Schwelle und leichter Erregbarkeit) (Pluess \& Belsky, 2013; Wyrsch, 2020). Seit der wegweisenden Studie von Aron und Aron (1997) konzentrierte sich der Großteil der empirischen Forschung auf die allgemeinen Merkmale von Hochsensibilit{\"a}t, insbesondere auf die negativen Konsequenzen (Greven et al., 2019). Nur wenige Studien untersuchten die Hochsensibilit{\"a}t im organisatorischen Kontext und ber{\"u}cksichtigten dabei auch die positiven Effekte von Hochsensibilit{\"a}t. Basierend auf dem Job-Characteristics-Modell von Hackman und Oldham (1976) schließen wir diese Forschungsl{\"u}cke, indem wir moderierende Effekte der Hochsensibilit{\"a}t auf die Zusammenh{\"a}nge zwischen den Arbeitsmerkmalen Autonomie und Aufgabenvielfalt auf die Arbeitszufriedenheit als organisationale Outcome-Variable untersuchen. Wir nehmen positive Korrelationen zwischen Arbeitsmerkmalen und der Arbeitszufriedenheit sowie einen positiven moderierenden Effekt von Hochsensibilit{\"a}t auf diesen Zusammenhang an. Die Ergebnisse unserer Studie (N = 719) best{\"a}tigen, dass die Hochsensibilit{\"a}t die Beziehung zwischen Autonomie und Arbeitszufriedenheit positiv moderiert. Gleichzeitig fanden wir jedoch auch negative Zusammenh{\"a}nge zwischen vulnerabler Sensitivit{\"a}t und Arbeitszufriedenheit. Hinsichtlich der Aufgabenvielfalt konnten moderierende Effekte ausschließlich f{\"u}r die Vantage-Sensitivit{\"a}t festgestellt werden. Die Ergebnisse verdeutlichen, dass sich die Zufriedenheit der Mitarbeitenden und gleichzeitig die Performance des Unternehmens verbessert werden k{\"o}nnen,n wenn moderne Arbeitsumgebungen Pers{\"o}nlichkeitseigenschaften wie Hochsensibilit{\"a}t im Arbeitsumfeld ber{\"u}cksichtigen.}, language = {de} } @incollection{McCallSmithRuehmkorf2025, author = {McCall-Smith, Kasey and R{\"u}hmkorf, Andreas}, title = {Sustainable supply chain management: linking international law to national through human rights due diligence}, series = {The Routledge companion to responsible business}, booktitle = {The Routledge companion to responsible business}, publisher = {Routledge}, address = {New York}, isbn = {9781003373162}, doi = {10.4324/9781003373162}, publisher = {Westf{\"a}lische Hochschule Gelsenkirchen Bocholt Recklinghausen}, pages = {17}, year = {2025}, abstract = {Human rights violations in global supply chains have been a focus of public discussions for nearly three decades. To address such violations in global supply chains, pressure was put on transnational corporations (TNCs) to use their economic power to prevent such harms from occurring at supplier factories, often located in the Global South. TNCs with well-known brands started to introduce codes of conduct for their suppliers as early as the 1990s. However, this approach was rarely, if ever, addressed or monitored through international or national law. Ensuring socially responsible supply chains was anchored in the voluntary assumption of responsibilities by private corporate actors. The inadequacies of the business-driven soft law approach to improve working conditions at supplier factories and natural resource collection sites drove a shift toward legal regulation. The shift toward national legal regulation consequently established a definitive link between soft and hard international human rights law and national law. The linking of international law to national through human rights due diligence is the focus of this chapter.}, language = {en} } @incollection{Ruehmkorf2025, author = {R{\"u}hmkorf, Andreas}, title = {Sustainability and Legal Education}, series = {Elgar Concise Encyclopedia of Legal Education}, booktitle = {Elgar Concise Encyclopedia of Legal Education}, publisher = {Edgar Elgar Publishing}, address = {Cheltenham, UK}, isbn = {9781035302932 (E-Book)}, doi = {10.4337/9781035302932}, publisher = {Westf{\"a}lische Hochschule Gelsenkirchen Bocholt Recklinghausen}, pages = {379 -- 382}, year = {2025}, abstract = {This entry discusses the role of sustainability in the law school. It traces the concept of sustainability in law and it argues that, in recent years, 'Sustainability Law' has evolved as a new field of law. This view is supported through applying theory on the creation of legal fields. There is an increasing number of regulation (particularly EU Directives) aimed at promoting sustainability and there is a growing number of journal articles as well as law school courses on this issue. There are several longstanding debates in legal modules which already overlap with the three pillars of sustainability (i.e. the economic, environmental and social pillars). Students should be alerted to these links. Finally, the chapter argues that the concept of sustainability should be integrated in modules across the curriculum in law schools as a contribution to UNESCO's mission to promote Education for Sustainable Development (ESD)}, language = {en} } @article{GanserRuehmkorf2025, author = {Ganser, Alina and R{\"u}hmkorf, Andreas}, title = {ESG in Germany: From the European Green Deal to the Supply Chain Due Diligence Act}, series = {Amicus curiae : the journal of the Society for Advanced Legal Studies, Series 2}, volume = {6}, journal = {Amicus curiae : the journal of the Society for Advanced Legal Studies, Series 2}, number = {3}, issn = {2048-481X}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49184}, pages = {695 -- 718}, year = {2025}, abstract = {This article discusses the trend towards environmental, social and governance (ESG)-related laws in Germany in the context of Germany's membership of the European Union (EU). As an EU member state, Germany is subject to a wave of recent directives and regulations that the EU passed as part of its so-called "European Green Deal". However, Germany also has its own tradition of promoting the goal of sustainability in the law, including company law. The article first distinguishes relevant terminology as some regulations refer to ESG, whereas others to "sustainability". It then traces the historic development of such laws in German law, including the traditional debate about the interest of the company in German law. This discussion is followed by a case study that critically examines the German Supply Chain Due Diligence Act of 2021 that continues to be subject to heated political discussions. The article demonstrates how ESG has, in recent years, become a compliance issue in Germany that is now a matter of consideration for boards.}, language = {en} } @masterthesis{Kiefer2025, type = {Bachelor Thesis}, author = {Kiefer, Janik}, title = {KI-Tools im bionischen Innovationsprozess Analyse und Entwicklung eines kombinierten Ansatz}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-47400}, school = {Westf{\"a}lische Hochschule Gelsenkirchen Bocholt Recklinghausen}, pages = {107}, year = {2025}, abstract = {Diese Bachelorarbeit erforscht die Einbindung {\"o}ffentlich zug{\"a}nglicher k{\"u}nstlicher Intelligenz (KI)-Tools in den Prozess bionischer Innovationen mit dem Ziel, einen sowohl effektiveren als auch einfallsreicheren Ansatz zur Implementierung biologischer Prinzipien in technische L{\"o}sungen zu schaffen. Vier Large Language Models - GPT-4.o, Gemini 2.0, Llama 3.3 und Claude 3.5 - werden anhand der Quality, Understandability, Expertise, Safety, and Trust (QUEST)-Methode (basierend auf der Bionikspirale gem{\"a}ß VDI 6220 Blatt 2) bewertet, wobei Gemini 2.0 die beste Leistung erbringt. In einem prototypischen Versuch wird Gemini 2.0 in Kombination mit NotebookLM und Elicit genutzt, um die Filtrationsmechanismen aquatischer Organismen zu untersuchen. Die Resultate offenbaren, dass KI-Werkzeuge die Effizienz der Literaturrecherche und -analyse steigern und systematisieren. Außerdem werden neuartige Entw{\"u}rfe f{\"u}r bionische Filtersysteme vorgeschlagen. Die Arbeit hebt die M{\"o}glichkeiten von KI-Instrumenten in der Bionik hervor, betont jedoch die zwingende Notwendigkeit menschlichen Fachwissens zur Interpretation, Validierung und Ableitung technischer Konzepte. Grenzen werden durch die eingeschr{\"a}nkte F{\"a}higkeit der KI zur Schaffung biologischer Analogien und das Fehlen standardisierter Schnittstellen bestimmt.}, language = {de} } @techreport{KleyKriegesmann2026, type = {Working Paper}, author = {Kley, Thomas and Kriegesmann, Bernd}, title = {„Future Skills" f{\"u}r den F{\"u}hrungskr{\"a}ftenachwuchs in der Digitalen Transformation: Was leistet Weiterbildung?}, volume = {2026}, address = {Bochum/Gelsenkirchen}, doi = {10.82479/jsra-rg87}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49143}, pages = {36}, year = {2026}, abstract = {Digitalkompetenz und ein „Growth Mindset" gelten als begehrte Ressourcen auf der „People Side of Digitization" - nicht nur im h{\"a}ufig akademisch gepr{\"a}gten Management, sondern auch unter Nachwuchsf{\"u}hrungskr{\"a}ften. Wie derartige „Future Skills" trainiert und vermittelt werden k{\"o}nnen, wird vor dem Hintergrund des Fachkr{\"a}ftemangels zur Aufgabe von strategischer Bedeutung. Als Hoffnungstr{\"a}ger gelten Weiterbildungsformate. W{\"a}hrend Weiterbildung jedoch zur Vervielf{\"a}ltigung von Routinewissen und f{\"u}r Anpassungsqualifizierungen mit dem Ziel der Effizienzsteigerung bew{\"a}hrt ist, sind M{\"o}glichkeiten und Grenzen f{\"u}r die Vermittlung von Future Skills weniger erforscht. Vor diesem Hintergrund werden im Rahmen dieses Forschungsberichts Ergebnisse und Erfahrungen aus einer Fallstudie diskutiert. Empirischer Kontext ist die Entwicklung und Evaluation eines Blended-Learning-Weiterbildungsformats „Digitalkompetenz" f{\"u}r die Zielgruppe F{\"u}hrungskr{\"a}ftenachwuchs. Welche Effekte f{\"u}r Digitalkompetenz sind zu erzielen? Welche Gestaltungsideen kommen in Betracht?}, language = {de} } @article{BrandUtuSirbuetal.2025, author = {Brand, Marco and Utu, Ion-Dragos and Sirbu, Nicusor-Alin and Perianu, Ion-Aurel and Predu, Denis Andrei and Marginean, Gabriela}, title = {Microstructural Characteristics of Graded Ni-Fe Coatings Fabricated Through DED-L}, series = {Materials (Special Issue Advanced Coating Research for Metal Surface Protection)}, volume = {2026}, journal = {Materials (Special Issue Advanced Coating Research for Metal Surface Protection)}, number = {19 (2)}, publisher = {MDPI}, issn = {1996-1944}, doi = {10.3390/ma19020271}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49138}, pages = {18}, year = {2025}, abstract = {Directed Energy Deposition-Laser (DED-L) enables high-performance coatings through melting and successive powder deposition. Its compositional flexibility suits functionally graded layers that enhance corrosion and wear resistance. This study aimed to improve parameters for producing dense, defect-free, graded Ni- and Fe-based coatings by varying the scanning speed and deposition strategy (monodirectional versus bidirectional, with/without layer rotation), while keeping the power and hatch distance constant. Laser and electron microscopy were used to link parameters to porosity and uniformity. Optimal settings minimized pores, improved interlayer bonding and preserved geometry; inadequate parameters yielded porous, irregular deposits. A bidirectional path with 90° rotation appeared best. Ongoing research activities are needed to assess its properties. Highlights What are the main findings? - Bidirectional samples show fewer pores than samples with monodirectional movement. - Increasing the scanning speed leads to lower porosity (bidirectional scanning mode with 90° layer rotation). - Bidirectional deposition with 90° layer rotation exhibits best quality What are the implications of the main findings? - Systematic study of scanning speed and deposition strategy. - Practical guidance for process improvement of graded metal coatings; properties under evaluation. - Functionally graded Ni-Fe coatings fabricated by DED-L with tailored microstructures.}, language = {en} } @article{RoutKentschDohmenetal.2025, author = {Rout, Surya Snata and Kentsch, Ulrich and Dohmen, Ralf and Traeger, Franziska and Das, Swarna Prava and Becker, Hans-Werner and Facsko, Stefan and Ritter, Martin}, title = {High-temperature He+ Irradiation of Low-iron-bearing Olivine: Laboratory Simulations of Space Weathering on Mercury}, series = {The Planetary Science Journal}, volume = {2025}, journal = {The Planetary Science Journal}, number = {Volume 6, Number 11}, editor = {American Astronomical Society,}, publisher = {IOP Publishing}, issn = {2632-3338}, doi = {10.3847/PSJ/ae172f}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49120}, pages = {9}, year = {2025}, abstract = {The surface of Mercury is highly space weathered, and the products of space weathering are different than on the Moon. Here we simulate the interaction of solar wind ions with the surface of Mercury by implanting low-iron-bearing (∼3 wt\% Fe) olivine slices with 4 keV He+ ions both under ambient conditions and at 450 °C during the irradiation. The sample irradiated under ambient conditions shows a ∼140 nm thick partially amorphous layer on top of the grain with high concentrations of bubbles and cavities. However, the sample irradiated at 450 °C has a 110-140 nm thick polycrystalline layer with 1-5 nm sized nanoparticles of metallic iron and no bubbles or cavities. Mg atoms are preferentially sputtered from the ion-damaged layer present on the sample irradiated under ambient conditions, but no difference in composition is seen between the crystalline olivine and the ion-damaged layer in the sample irradiated at 450 °C. In addition, a thin amorphous film deposited on a micro-electromechanical systems-based chip is heated up to 1200 °C in situ inside a transmission electron microscope for a few milliseconds, and it produced nanoparticles of size 5-30 nm. Our results show that solar wind irradiation of low-iron-bearing olivine in the equatorial regions of Mercury will produce nanoparticles of iron whose sizes will be larger than that on the surface of the Moon and that the size will further increase during impacts of dust particles. Solar-wind-implanted He can diffuse out of regolith grains and can be a source of He observed in the exosphere of Mercury.}, language = {en} } @inproceedings{AyasLaarmannMeieretal.2025, author = {Ayas, Mert and Laarmann, Frank and Meier, Leif and Zeume, Katja}, title = {Vision Paper: Improving the Accessibility of Port Operations in Supply Chain Management using Graph Data Analysis}, series = {Proceedings of Workshops at the 51st International Conference on Very Large Data Bases (VLDB 2025), London, United Kingdom - September 1-5, 2025.}, volume = {2025}, booktitle = {Proceedings of Workshops at the 51st International Conference on Very Large Data Bases (VLDB 2025), London, United Kingdom - September 1-5, 2025.}, number = {Vol. 14, No. 1}, publisher = {VLDB Endowment}, issn = {2150-8097}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49066}, pages = {6}, year = {2025}, abstract = {In supply chain management of port operations querying and visualizing network data often requires complex joins, nested queries and predefined reporting templates, which can hinder exploratory analysis and decision-making. When relational databases become too rigid and cumbersome for transactional processing, we envision an alternative approach using graph data models, provided by transforming entities (e.g. containers, vessels, terminals) into nodes and their relationships (e.g. arrival, loading, handling) into edges. To investigate the potential benefits of transforming relational supply chain data into a graph-based model, we designed and implemented a structured approach that integrated data processing, transformation and performance analysis across both relational and graph databases.}, language = {en} } @article{Bergmans2025, author = {Bergmans, Bernhard}, title = {Merkmale und Einflussfaktoren des Studienerfolgs in wirtschaftsjuristischen Bachelor-Studieng{\"a}ngen. Eine empirische Untersuchung}, series = {ReWir - Recklingh{\"a}user Beitr{\"a}ge zu Recht und Wirtschaft}, volume = {2025}, journal = {ReWir - Recklingh{\"a}user Beitr{\"a}ge zu Recht und Wirtschaft}, number = {70}, editor = {Bergmans, Bernhard and Marquardt, Ralf-Michael}, publisher = {Logos Verlag}, address = {Berlin}, issn = {2191-866X}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49114}, pages = {34}, year = {2025}, abstract = {Der Aufsatz untersucht anhand empirischer Daten zu ca. 400 Studierenden wirtschaftsjuristischer Bachelor-Studieng{\"a}nge an der Westf{\"a}lischen Hochschule eine Reihe etablierter und neuer Indikatoren f{\"u}r den Studienerfolg. Insbesondere schulnotenbezogene Pr{\"a}diktoren erweisen sich dabei als nur noch bedingt aussagef{\"a}hig, andere bekannte (insbes. Motivationslevel) und neue (insbes. Berufsausbildung vor dem Studium) erweisen sich als verl{\"a}ssliche, wenn auch nicht starke Pr{\"a}diktoren.}, language = {de} } @article{OtterpohlNalbachPaladinoetal.2025, author = {Otterpohl, Florian and Nalbach, Peter and Paladino, Elisabetta and Falci, Giuseppe A. and Thorwart, Michael}, title = {Quantum 1/f^η noise induced relaxation in the spin-boson model}, series = {Physical Review Research}, volume = {2025}, journal = {Physical Review Research}, number = {7}, publisher = {American Physical Society}, issn = {2643-1564}, doi = {10.1103/t87m-7pwn}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49035}, pages = {6}, year = {2025}, abstract = {We extend the spin-boson model of open quantum systems to the regime of quantum 1/𝑓^𝜂 noise characterized by negative exponents of its spectral distribution. Using the numerically exact time-evolving matrix product operator, we find the dynamic regime diagram, including pseudocoherent dynamics controlled by quantum 1/𝑓^𝜂 noise. We determine the dephasing rate and find for it an empirical formula valid at zero temperature. The bath reorganization energy depends on the infrared bath cutoff frequency, revealing an increased sensitivity of the dephasing on the measurement time of an experiment. Our results apply to a qubit as an elementary building block of a quantum computer and pave the way toward a quantum treatment of low-frequency noise in more complex architectures.}, language = {en} } @article{PattynSciacquaKwiedoretal.2022, author = {Pattyn, Cedric and Sciacqua, Dario and Kwiedor, Lukas and Jagodar, Andrea and Strunskus, Thomas and Traeger, Franziska and Lecas, Thomas and Kovacevic, Eva and Berndt, Johannes}, title = {Controlled deposition of plasma-polyaniline thin film by PECVD: Understanding the influence of aniline to argon ratio}, series = {Plasma Processes and Polymers}, volume = {2022}, journal = {Plasma Processes and Polymers}, number = {Volume 19, Issue 5}, publisher = {Wiley-VCH}, issn = {1612-8869}, doi = {10.1002/ppap.202100233}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:1010-opus4-49095}, pages = {10}, year = {2022}, abstract = {Low pressure capacitively coupled radiofrequency plasmas operated in a mixture of aniline vapor and argon are used for the deposition of thin films on silicon substrates. The influence of the aniline vapor fraction in the gas mixture upon the plasma properties and the characteristics of the deposited thin film is analyzed. Plasmas diagnostics are carried out using mass spectrometry and optical emission spectroscopy and the thin films are characterized by means of Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine-structure spectroscopy. Experiments highlight that the use of a low aniline/argon ratio leads to the deposition of an amorphous film whereas high-aniline/argon ratios allow the synthesis of a plasma polymer similar to polyaniline. The properties of such plasmas and the mechanisms involved in the deposition process are discussed in detail.}, language = {en} }